Object to detect and record the image of the object

Similar Questions

• retrieve and record continuous images in labview

  Hello

  I use the NI 1744 smart camera to capture and record continuous images of a moving object. My smart camera is detected in MAX and made the seizure of an image. But when I use the attached file of VI in labview, the smart camera is not detected, only the webcam is detected and a video can be generated using the webcam. Please help me detect the NI 1744 smart camera. I will be grateful.

  Hello

  Your smartcam is not directly accessible from your PC because it is a remote device.

  Create a project in real time to access your camera.

  Have a look here: http://forums.ni.com/t5/Machine-Vision/Error-1074397145/m-p/535230/page/2?view=by_date_ascending

  Concerning

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• acquisition of wireless signals and record the signal as text at the same time for 5 minutes

  Hello

  I'm wireless ECG signal and the display in waveform graph. And at the same time, I need to save it as text for 5 minutes. The problem I faced is for record of the signal, I use scripture to the extent file that saves the file as text... but everything by saving the trace speed decreases.

  I'm very new to labview so please can someone me if Miss me something in it... Please help...

  Why people always post photos of their screws rather than the screws themselves or at least excerpts?  We can't tell from the picture what Version of LabVIEW, you use (so if we post code, you will not be able to open it), and we can not 'play' with your code and try without, ourselves, by hand, trying to recreate your diagram (sometimes very small).  Please, help us help you!

  This is in any case helps to familiarize yourself with the design of producer/consumer model.

  1. Open LabVIEW.
  2. Click on 'File', choose 'new '.... "(no new VI), then (in models) producer/consumer Design Pattern (data).
  3. Study the model and adapt it to your problem.

  The producer would be anything that generates data.  Once you have the data, you put on the queue and send to the consumer for the entire treatment.  The idea is that the producer has an inherent calendar that he must answer, otherwise you lose data points.  The consumer, on the other hand, just need to follow 'more or less' (in fact, the queue may / will develop, if the amount of data is not megabytes, so the consumer can really be quite slow, if you usually want to consumers, on average, to be at least as fast as the producer).

  Bob Schor

• Unable to detect and open the HARD drive

  Hello. I have a Seagate 1 TB external hard drive. And my mac is running on the latest OS, I was still able to connect and open my hard drive on my mac, but after reboot my macbook only once after an update, I can access is no longer my hard drive. Why is it so? Is that what I can do to re - open and use my hard drive as usual?

  Restart and hold down command + R, this will take you to the recovery, you can test and repair the hard drive.

• Illustrator, says 'Missing Police' while InDesign detects and uses the same fonts OK

  Looks like I'm having some problems with fonts for CC Illustrator on Mac OSX (Mavericks), both new installs.  Specifically, I'm trying to open a .ai file that uses the font "Coolvetica.  Then, I get the error "Missing Fonts" here:

  

  I installed the police and restarted Illustrator:

  

  

  I opened the dialog box "Find fonts" to see that is still missing:

  

  I wanted to check that it was, in fact, installed, then I open OpenOffice and tried it with success.  Also, I opened InDesign and tried it with success.

  I searched the forums for clues.  I found there a CC cleaning tool, if I followed the instructions, making sure to restart my computer and reinstall Illustrator.  Unfortunately, I was met the same problem after reinstalling.

  Any help would be greatly appreciated.

  To recap:

  Steps to reproduce:

  1.) to open a .ai file that already contains fonts "coolvetica.  In my case, it's a file that has been generated on another Windows computer running an earlier version of Adobe CS.

  2.) get the error message about missing fonts

  3.) install the fonts using the font book

  4.) restart Illustrator and re - open the file

  Expected results:

  Police is correctly

  Actual results:

  Still missing a font

  Thanks for the persistence, Jacob.

  I tried to clear the cache of fonts using 'sudo atsutil databases - remove' and restart immediately with no will.  I also gave the thing 'Place' a trial with no will.  However, I did find a resolution!

  In this case, for some reason, I have two different .ttf files "Coolvetica" I installed, both are the value of type 'Ordinary' (see screenshot in my first post).  Even if they are all two "regular", they have a different appearance for them (once again see screenshot above).  I was beginning to think that this double name is confusing Illustrator, so I dug deep enough into it and found that I could change 'Ordinary' to something else so that the name is not in conflict.  "This necessary by using the guide here: FontGeek" TTX helps to rename fonts.  After you run the police through program "ttx", I replace all occurrences of 'Ordinary' with the 'descent' (in reference to the stung 'G') within the generated file .ttx.  I then re - crossing "ttx" program and installed the newly created fonts.  I opened Illustrator and tada!  It worked.

  Ultimately, it seems that the name of type of duplicate fonts was which was missing his shot upward.   I was able to replace the fonts correctly after that.  This could cause headaches for other members in my group because they their policies will have a different name than mine and now they're going will be requested to "Seek a police", but I think that it is a step in the right direction and I can figure the rest out later.

  Thank you!

• When I long press on and record an image it goes to my downloads, the image is stored on my phone? or app only?

  The image does not appear in the Gallery of my phone, but I can see in the download section of the application. Let's say that I want to record and mms image rather that the share link, is it not possible?

  Oh, and it is not a plugin problem, because I have installed "Personas" and has done after the image.

  The image is saved on the SD card, but it does not appear in the Gallery right away due to a bug in Firefox: https://bugzilla.mozilla.org/show_bug.cgi?id=646550

  This bug will be fixed in Firefox 5, which will be published in about two months. If you want to help test the difficulty today, you can download a version of Firefox 5 Overview ("Aurora") of https://wiki.mozilla.org/Mobile/Platforms/Android

• Calculate the maximum value of the sub-table when creating using a structure of case and records the shift

  I have two 1 d arrays that contain cyclical information (a bit like a sine wave).  One that contains information about the position in degrees and another that contains the couple.  I would like to calculate the value of maximum torque whenever the station is within a certain range (for example, 30 to 80 degrees).  The beaches are repeated - that is why it is cyclical.   I use the function "in the range", a structure of the case and the shift records to build a new table with the values that are included in the beach I said - that was easy part (see attached VI).  I'm struggling with a way to calculate a maximum value for each sub-table formed when the values are 'in range '.   Your help is very appreciated.

  vt92 solution worked!  I agree that there should be a simpler solution, but your to works fine.  Thank you very much.

• How to register and record the music/videos to my computer from online sites?

  Original title: record music/music vidios

  I need to know how to record music/music vidios, (download), to my computer from online sites & how to save them.

  Hi Fredluvs,

  If you try to save from a legitimate Web site, you can use Windows Media player to record music videos and save it to media player.

  For more information, you can consult the following article:

  Getting started with Windows Media Player

• How to load the 4155B file, run it and record the results to Excel with Labview

  Hi, I need model command support, sending to 4155B using Labview.

  I would like to load the file from the disk on 4155B using Labview. First of all, I tried to write the command using MAX and found that the command that I write to 4155 B contains the error message. "I sent the two GT ' MYFILE P" and : MMEM:LOADTAT 0, filename orders every time to 4155 B, but failed. May I know what kind of command must send to the communication with the instrument?

  Besides, I need to run the content of the file, I should send it OUT @Hp4155; "' XE ' command?

  After running, I need save the result in excel file back.

  Grateful if someone can help. Thanks in advance for your help.

  Kind regards

  Yong

  SH_Yong wrote:

  Hi, I need model command support, sending to 4155B using Labview.

  I would like to load the file from the disk on 4155B using Labview. First of all, I tried to write the command using MAX and found that the command that I write to 4155 B contains the error message. "I sent the two GT ' MYFILE P" and : MMEM:LOADTAT 0, filename orders every time to 4155 B, but failed. May I know what kind of command must send to the communication with the instrument?

  Besides, I need to run the content of the file, I should send it OUT @Hp4155; "' XE ' command?

  After running, I need save the result in excel file back.

  Grateful if someone can help. Thanks in advance for your help.

  Kind regards

  Yong

  The SCPI commands are found in the manual of the instrument.

• Solution allowing to choose and record the lessons on a Web site

  Hello

  I have a client who want to add a service to the customer at their website where they can click on library items, a selection of multiple files, then collected and downloaded or sent to them.

  The page in question is http://www.leonardsmithcpt.com/exercise-library

  Not the page does not have links files.

  Can anyone offer no simple solution move right?

  I'm a mostly designer not a programmer.

  Thanks in advance.

  Dan

  The download of HTML5 attribute can be used in a link to force download, like this:

  My PDF

  .. are then collected and downloaded or emailed to them.

  If the customer downloads a file at a time, you can do it with just HTML. If you want to collect and download and send as a group, the technical requirements become significantly higher.

  So the short answer is that you can give your customer what they need without having to deal with PHP or javascript, but may not be as smooth as what they are planning.

  If the simple solution of HTML is not good enough, check out jQuery plug-ins to download the file.

• Apple Watch will record the fibrillation little finger?

  Will be Apple Watch monitor and record the heart rate so that an incident of fibrillation little finger would be visible after the fact by a doctor?

  While the screen of the watch displays your heart rate, it does not record as an instrument of EKG, as the watch is not a certified medical device. It will show your rates and if you feel that you have an incident, you can get it to save your rate once again, otherwise, it doesn't save specific intervals on a regular basis. It is not defined to be able to recognize a change in the rate, and then save.

• My computer has a virus, can I start safe mode and download the scanner software?

  My daughter has a virus on his computer and he was arrested for perhaps a year. Can I try and see if it will boot in safe mode and down load a service of scaning as Mirco soft essentials for a scanner or Malware Anti-malware bytes. I guess my question main you can down load a program in safe mode.

  Hello

  Of course you can. Use safe mode with networking to download directly on his computer--several times
  as you start the computer, press F8.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
  See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
  see your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My email has a virus and prevents the sending of a complement for candian meds to all my contacts

  A friend told me I have a virus. It sends an attachment to a candian med store to all my contacts and keeps sending them daily. What can I do?

  Hello

  Proceed to a very thorough check for malware and then change your password by e-mail.

  It is possible for a person to send the email that 'seems' to be of your
  account but that is not really - called "Spoofing." That means its 'Possible' emails
  were not really you, although they may have your contact list. Have someone
  who receives the e-mails to check the header to see where he is actually sent by and
  NOT only the answer to the address.

  How to read the message headers
  http://www.high-speed-Internet-Access-Guide.com/articles/email-headers.html

  E-mail spoofing
  http://en.Wikipedia.org/wiki/E-mail_spoofing

  E-mail spoofing and Phishing
  http://www.mailsbroadcast.com/email.broadcast.FAQ/46.email.spoofing.htm

  Understanding E-mail Spoofing
  http://www.windowsecurity.com/articles/email-spoofing.html

  Fraudulent emails (false)
  http://pages.eBay.com/education/spooftutorial/

  Google search - email Spoofing
  http://www.Google.com/search?hl=en&EI=FB1nS9DiNo7CsQPNhKGdAw&SA=X&Oi=spell&resnum=0&CT=result&CD=1&ved=0CAgQBSgA&q=email+spoofing&spell=1

  =============================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I see and record Print audit log Server 2008 AD

  We want to know how to check and record the audit log printing to network printer connected with managed print services to the server active directory 2008 and also to authenticate the basic possible print AD?

  Hello

  The question you posted would be better suited in the community pro Windows 2008.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer