ObjectGroupReadOnlyException when opening a message in Inbox

Similar Questions

• When I connect my hotmail account, I can't open any folder, the Inbox, the new message,... everything seems normal, but when I click on something, it isn't responding.and it doesn't see the error.it works very well in internet explore.

  When I connect my hotmail account, I can't open any folder, the Inbox, the new message...
  everything seems normal, but when I click on something, it isn't responding.it works very well in internet explore.

  I think the next thing to test would that interfere with Add-ons. Disables the Firefox Add-on - Add-ons that only list compatibility with Firefox 5, but some add-ons could cause problems.

  To test, the simplest method is to restart Firefox Safe mode.

  First of all, I recommend you backup your Firefox settings in case something goes wrong. See your backup information. (You can copy your profile folder Firefox together somewhere outside the Mozilla folder).

  Then, try help > restart with disabled modules > continue in Mode safe (do not check the boxes). This article gives more information on the options and features of Safe Mode: Safe Mode.

  What is fix? If so, you may have to disable some add-ons.

• When I open a message in Thunderbird, I sometimes the content of the message of the previous message.

  When I open a message in Thunderbird, I sometimes the content of the message of the previous message.
  This means that all the content of the message is replaced by the content of the previous message. I can't see the message and must ask the sender to send again. Why is this, is my overloaded messaging system or what?

  This usually indicates file corruption.
  Right-click on the folder of the problem, and then select Properties. Then the Repair folder.

  Be prepared to lose messages if the corruption is too bad. It may be a good idea to move all messages that you want to keep in a new folder. Create folders, under local folders to sort your emails from guardian in. It's a good idea not to keep a lot of mail in the Inbox in any case, as you'll see when you read the attached article.

  Read this article on maintaining your system to avoid this in the future.

  http://KB.mozillazine.org/Keep_it_working_-_Thunderbird

• why I can't open emails in my Inbox that happened before today - I can open the messages today and I can't open emails earlier tha are stored in other folders

  Yesterday, I got a message that I "could not mail" because my Inbox was full and that I should delete some files or compact. He had only about 20 messages in there, but I had ignored the suggestions that I have compact for awhile I went to the menu and hit compact. Then I could get mail and I could open it while he was in my Inbox.

  This morning I got the email and I was able to watch it and I deleted a lot. A little later (I had rebooted my computer at the same time) I wanted to watch an email in my Inbox. He seemed to open but didn't have any content at all. Similarly when I looked at the message at the bottom of the screen it doesn't show there at all. The only messages in my Inbox that I watch are the two that happened today.

  I am able to open the messages that are stored in other folders. But by moving a message in the Inbox to a folder not in fact could not be opened.

  Something else odd; in the Inbox, a message that I can open shows the sender evil - the sender of a message that I had been in motion to see if it could be opened if it was stored elsewhere; but the sender is correct when I opened the message.

  It's all very weird.

  It sounds like you do not have a corrupt Inbox file.

  First create a backup of your profile folder.

  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

  Then try to repair the Inbox.

  Right click on the folder of Inbox Repair - properties-

• I can't open Gmail message when using Firefox, although I can with Chrome. New problem.

  All of a sudden I can't open Gmail messages if I'm in Firefox. The Inbox comes with all the titles of message, but when I click on any one of them I just get the title with an empty window below.
  If I'm in the Chrome browser when I use Gmail, there is no problem.
  I prefer Firefox to Chrome, but I can't use it if I can't access my Gmail messages with it. 8.0 Firefox is not in sync with Gmail?

  Thanks Yorknyc! Trying to reply to or transfer a message has not make visible to me, but I try to print he made! Then I hit like watching a few messages, and then all the problem disappeared. No idea why, but everything just happy to have all my messages visible.

• Windows Live Mail - a problem occurred when trying to open this message

  Hello

  I have a question where several emails appear in my list to the Inbox, but when trying to open them, the "this is a problem when you attempt to open this message" error.  After investigation, I noticed that the messages in question also appear in my file to delete items.  There, I can open them, so it turns out that the header of the message remains in the Inbox without the body.

  After reading many forum, I ran the command "esentutl.exe d «%userprofile%\AppData\Local\Microsoft\Windows Live Mail\Mail.MSMessageStore»»  Subsequently, I now can't open Windows Live Mail, seeing the error "Windows Live Mail could not be started.  The application could not open the Windows Live Mail message store. Your Windows Live Mail mailbox data is currently used by another program, such as a virus scanner. Close the program or wait so he could complete its operation, then open Windows Live Mail again. (0x800C0155, 2) »

  I then delete the message store file so that Windows Live Mail restores a backup in order to restart the program and check my email.

  Help, please.  Thank you.

  Windows Live Mail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• I opened the message in the Inbox, read it, close it, the message is gone. Help?

  I open Thunderbird and find three unread messages. I open and read a single message. I end this message that I do not delete it. After that I closed the message is no longer in the zone to. I manually move the files. Still can't find it. I do a search and it will be found in my Inbox. If I open it in research I read. If I go to the Inbox, it isn't here but research says it's. I return to find and open the message again. This time I move the Inbox. I go to the Inbox and it isn't here. So, I go back and copy it to the Inbox, still not there. If I move or copy to a different folder, it will appear in the file send it to that. With the exception of the Inbox, not yet presentation. I hope I described it well enough. It is very difficult. I'm getting confused just trying to keep things simple. I've never had this problem. I had about 3 updates to Thunderbird, since he started and still have the problem. I stopped Sync. That did not help. I have Windows 7. I've always used Thunderbird as my default email. I really hope that someone might have a solution. Thank you.

  Go to the view menu and then assign Threads to it all instead of unread.

• I miss the feature "Automatically mark message as read when opened" as found in Eudora

  It would make Thunderbird a lot nicer that the two alternatives presented are all simply boring.

  I really have no idea what you're talking about.
  Mark mail as read when opening Thunderbird, the default value is immediately, but that can be changed in options.

  Maybe your slot some mistaken hypothesis that there is a sort of preview of the message.

• I want to click to open the message, but it is to open when I select it, and I can't get rid of the open under the messages pane.

  I want to click to open the message, but it is to open when I select it, and I can't get rid of the open under the messages pane.

  The preview area is called the messages pane. You can activate the message on and outside pane using either:

  • F8 key
  • Press the Alt key to display the classic menu bar > View menu > page layout > the message pane

  I don't know why I can't find it in the new menu (3 bars). There has got to be somewhere.

• Outlook Express (XP) - Error Message "there was an error opening this message. An error has occurred. "When you try to open an e-mail.

  I can not open e-mails or addressbook from OE.

  When you open an email, I get the following messages, 'there was an error opening this message.  An error has occurred. "However, I can save an email on my desk (cause I can't open it) and receive the following error message while trying to open my office on the second dialog box AFTER the above message, Outlook express could not be started.  It can be installed incorrectly.  Make sure your disk is not full and you're not out of memory.  Contact Microsoft support for further assistance (0x8004104F)".  I'm not out of disk space or memory.

  When I try to open the address book within the OE, the error message says "unable to open the address book.  The AddressBook is may not be installed correctly.  I check that the WAB file is not read-only (as a matter of fact, I can open the WAB file directly by double-clicking in Explorer and email as an 'Action' very well).  Also, I check register and I have not any sharing with Outlook 2007.  I continue to receive emails and such mentioned, can send through the WAB file.

  There was an update of Windows by 18 points before it do not longer work.  I don't have a record of what has been installed.  I tried to come back a week to a previous restore point, but told me that nothing has changed.

  Help, please.  This has worked well for years.

  Remove Folders.dbx. If you can get OE open, create a new book of identity and address.

  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  The path to the message will be very similar to this:

  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express

  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.

  Note these possible side effects:

  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.

• When opening Legacy Family tree, I received a message "Please wait while windows configures DAO. Then "error 1706. No valid sources were found for the DAO product.

  "Error 1706.

  When opening Legacy Family tree, I received a message "Please wait while windows configures DAO.  Then the message "the feature you are trying to use is on a network resourse which is not available. Then "error 1706. No valid sources were found for DAO product. "  I uninstalled Legacy and reinstalled, but the problem persists.

  Heritage it's a windows problem.

  try to run a file system Checker

  Start-> Run-> cmd
  In the prompt, type: SFC/scannow
  The scanner

  Reinstall the product

• When I get messages that needs to open a Web site a popup window stops him. What can I do to fix this?

  . A pop-up window has been blocked and not able to open.

  When I get messages that needs to open a Web site a popup window stops him. What can I do to fix this?

  Hello JoyceAtkinson

  To display the pop-up window, you will need to disable the pop-up blocker. Follow the link below to lean how to do this. Thank you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-pop-up-Blocker-frequently-asked-questions #

• I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that no such interface supported.

  I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...

  Hi MAMARDA,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Windows 7 use you?

  (b) what is the exact error message you are getting?

  Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  When you are in safe mode, follow the steps mentioned above to complete the restore of the system.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry smartphones can not see the list of the entire message when I opened the messages icon.

  I used to be able to see a combined list of my emails, texts SMS, missed calls, voice messages and anything else when I open Message folder icon on my Blackberry Curve 8330 office, but now when I open it, all I get is a blank white screen.  When I hit the menu button, the menu appears without a problem and if I click on the trackball, it will open a message, but I do not see the list itself.

  Also, when I go to view the folder I can access an individual folder and they come very well.  The only problem is the list of the combined messages that you are supposed to get when you open the icon on the desktop (or the application menu).

  Could someone help me please

  First thing... do a reboot simple: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.

  Now, that is the visible screen?

• When my cc photoshop opens a message "extension could not be loaded because it was not signed." What is c? How can I fix this, please advise. Thank you

  Hello...

  When my cc photoshop opens a message "extension could not be loaded because it was not signed." What is c? How can I solve this problem.

  Please notify.

  Thank you

  Shaji

  Hi Shaji,

  You use Onone extension on your machine? If so, please follow the steps mentioned below.

  http://www.on1.com/support/979135/

  Please post on the Adobe Forums.