$ObjId: error processing INDEX_ALLOCATION $ o: $ and then system shuts down

error code

I have this error code and then my system shuts down. What can I do to solve the problem? $ObjId: error processing INDEX_ALLOCATION $ o: $

Hello

  • What were the changes made before the problem occurred?

I suggest you to see these steps:

Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

If it works fine in safe mode, try to perform a clean boot in safe mode.
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

Tags: Windows

Similar Questions

  • When I try to logoff, the screen starts to Flash as trying to load screen and then finally shuts down the computer.

    Original title: Windows 7 problem

    I will have questions all the time my office. When I try to shut down rather than get the loggin screen the screen starts flashing as trying to load screen and then finally shuts down the computer. I just bought the computer and it runs Windows 7. What could be the problem? Oh I forgot to mention that, after that I start the computer the configuration screen appears saying that windows did not close normally and if I want to start in safe mode.

    Hello

    Here are a few questions to better understand the issue:

    1 made only while off log?

    2. what happens when you restart?

    3 have you tried with different user accounts?

    4 you did changes to the computer before the show?

    Let us try the following and see if they help.

     

    Method 1: Check the event viewer for more details on this subject.

     

    Event Viewer is a tool that displays detailed information about important events on your computer.

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

     

    Method 2: Run the following fix:

    There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2

    http://support.Microsoft.com/kb/975777

     

    Method 3: Perform the clean boot and check

    It may be that a third-party application is causing this issue. Put the system at boot.

    To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

     

    Method 4: I suggest you make a system full scan just to be sure.

    Here is a link that will give you information on how to perform a full scan of the system:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

     

     

  • Get the error when after the desktop is loaded: "search parameter was a problem and will be shut down."

    original title: definition error according to the office is responsible.

    the search parameter error message had a problem and will be shut down. This happens when startups while remaining on the desktop.

    Hello

    1. What is the exact error message you get?

    2. have you recently made changes to the computer?

    I suggest you to see the site mentioned below:

    Step 1: Safe Mode

    Start the computer in safe mode and check if the problem persists

    A description of the options to start in Windows XP Mode

    http://support.microsoft.com/kb/315222.

    If the problem does not persist in star safe mode the computer to the boot and see if the problem still occurs.

    Step 2: Clean boot

    How to configure Windows XP to start in a "clean boot" State

    http://support.microsoft.com/kb/310353.

     

    I also suggest you to see link below:

    Advanced Troubleshooting for General startup problems in Windows XP

    http://support.microsoft.com/kb/308041.

    Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

    Warning: As there is a possibility of loss of data after the upgrade on site I suggest you make a backup before the operation.

     

    Note:  When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

  • error 1321: NTauthority or Services and controller app sez he has a problem and the computer shuts down

    sez no authority trying to run AVG or Malwarebytes - every 1/2 hour or if some "prog system? NTauthority or Services and controller app sez he has a problem and the computer shuts down

    Hello

    • What is the full error message?
    • What were the changes made to nfore this question?
    • What exactly do you mean by "no authority running avg or malwar bytes?
    It's a possibility that there is a startup program that is launched with a command line and it appears.
    You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  • I welcomed upcoming window for an update and then they took down my firewall and all my sucurity for a vista 2011 junk and want me to pay. Why and how can I go back?

    I welcomed upcoming window for an update and then they took down my firewall and all my sucurity for a vista 2011 junk and want me to pay. Why and how can I go back? IT DON'T ME LET HIM DO ANYTHING. I'm using another computer to do this because it won't let me go on the internet or access all programs! I don't want to buy the secuirty cause im going to buy another computer soon as soon as sales are made. but I need this one until I can do my school work and Exc...  any help?

    Makes it look like one of these:

    http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011

    http://www.bleepingcomputer.com/virus-removal/remove-Internet-Security-2011

    If this is not the case, see if you can find it in this list

    http://www.bing.com/search?q=site%3Ableepingcomputer.com%2Fvirus-removal%2f+Vista+2011&QS=n&SK=&SC=5-51&form=QBRE

    Use the instructions in the manual. Do not download anything from advertising on the page.

    As you can not access the Internet, you will need to download all the tools you need on another computer and transfer on the computer infected with the help of a USB Flash drive.

    You can also try the Microsoft System Sweeper Standlone:

    http://connect.Microsoft.com/systemsweeper

  • Compaq mini 700: Compaq mini 700 laptop error fatal system shut down.

    Compaq mini 700 laptop error fatal system shut down.

    CNU9144WRX

    can you pls give me a current password. my mini doesen´t have a.

    THX

    Hello

    Enter: e9lo3vvdb4 (to be noted that in both cases, the 3rd character is a lowercase L)

    or

    e9lo3vvdbr

    Kind regards

    DP - K

  • Are there problems with Microsoft 7 and Frontpage 2002? The system shuts down when I try to add a hyperlink.

    The system shuts down when I try to add a hyperlink.  The hyperlink insertion page opens.  But when I try to click on the link that reads "Microsoft Frontpage has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

    Edited to add: if I type in the hyperlink, it seems to work.  But in the past, I just clicked it.  But now when I click on it is when she stops.  Strange.  Did not this on the Vista computer.

    Hello CaptainKAG,

    Thanks for posting on the Microsoft answers Forum.

    I recommend you post in the Forum Office where this problem is related to FrontPage 2002. We can install on Windows 7, but is not fully compatible, so some features may not work properly. Office 2003 and Office 2007 are fully compatible with Windows 7.

    Click here to post in the Forum Office.

    Sincerely, Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • an error message appears indicating the pc has a problem and the computer shuts down

    an error message appears saying the pc has a problem and the computer shuts down.

    What do you do when this happens?  It is the way in which computers to protect the components of your computer.

  • Windows 8 maintenance keeps asking to be executed, then it shuts down after 10 minutes and repeat application to be run again

    Windows 8 maintenance keeps asking to be executed, then it shuts down after 10 minutes and rehearsals require to be run again, I turnit on and it turns off after 10 minutes .This continues to repeat and it never ends, how do I fix?

    Original title: maintenance of windows 8

    I suggest that you run the following commands from a command prompt (Admin).

    (1) sfc/scannow, when finished and restart

    (2) Dism.exe / Online/Cleanup-Image /ScanHealth

    (3) Dism.exe/online/Cleanup-Image /RestoreHealth Reboot and try to perform the maintenance, if the problem persists restart sfc/scannow and restart the computer.

    Hope this helps and if you need any additional aid station and we will be happy to help you.

    The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

    "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

    If this has answered your message please mark as answer

  • "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

    Hello!

    For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

    It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

    My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

    Here are more details, where they can help in the diagnosis of my problem:

    • ID of the system board: 30BB
    • Type of processor: Genuine Intel(r) CPU T2250
    • Processor speed: 1730 MHz
    • Total memory: 1024 MB
    • Video memory up to: 128 MB
    • BIOS version: F.06

    Here's the entire message to the blue screen:
    - - - - - - - - - - - - - - - - - - - -
    A problem has been detected and windows has shut down to prevent damage to your computer.

    If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

    Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

    Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

    Technical information:

    STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
    - - - - - - - - - - - - - - - - - - - -

    I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

    Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

    With great appreciation for your time,.
    Damaya

    Quick suggestion

    Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
    Good luck
  • My laptop is operating completely normally and would never shut down on its own. __But when I try to play a game or during the plauing sometime example pes 2010 or need for speed, my laptop some time Shut down.

    My laptop Qosmio F50 works completely normally and would never shut down on its own.
    But I try to play a game pes 2010 example or the need for speed, my laptop long closed.
    It was good before, but after rebotting my computer this problem just recently started...
    I have Nvidia Geforce, DirectX 10 and all recommended Requirments for the games but sometimes I start a game or after 2 or 3 housr game it would be completely Shut Down My computer and when I would turn on the computer, he would say that it was not Shut Down normally.

    Alhajji,
    They suggested to do a factory restore, if a valid step to do.  I know this isn't the most fun thing to do, but if you restore the system failing factory (clean install of the operating system).  Then, run Windows update and update drivers.  At this point, you can install a game and test.  If the problem persists, it would look to be a possible hardware problem with the system.
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • System shuts down randomly.

    System shuts down randomly. Watched the Sytem log and found this. Event ID: 1003 category: 102. Error code 1000000a, 99e84008 parameter1, parameter2 00000002, parameter3 00000001, parameter4 8051f78f. No idea if it's the hardware or software associated with?

    Hello

    1 have you done with the hardware changes to your computer lately?

    I think it's an IRQL not less than or equal stop error, it is usually a device driver that requires.

    I suggest that you follow these steps and check to see if they help.

    Step 1:

    Disable the automatic restart in case of system error:
     
    a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
    b. use the arrows to choose to disable automatic reboot failure system to the Windows Advanced Options menu appears, and press ENTER.

    Step 2:

    Although the error code cannot be bound, you can follow all the measures applicable from this article and see if the problem still occurs.

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;q314063

  • When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

    Original title: when I turn on the computer.

    the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

    Hi Cjdaniello,

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Step 1: Start in safe mode and check if the problem persists.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    I hope this helps.

  • HP Mini 110-1125-erro system shut down CNU9417H9V

    HP Mini 110-1125-erro system shut down CNU9417H9V

    Can someone help me

    Hello

    Enter: e9lov3xzo6 (3rd character is a lowercase L)

    Kind regards

    DP - K

  • I have this error code and then my system shuts down. $ObjId: $ o: $INDEX_ALLOCATION

    Host process for Windows Services $ObjId: INDEX_ALLOCATION processing error $ o: $

    I have this error code and then my system shutdown. What can I do?

    I hope that you have a backup...  The only thing that comes to mind is to reinstall the operating system.

Maybe you are looking for

  • Tecra A10 with wrong source IP address ping responses

    Hello! I have problems with my network connection. After installing Win7 pro answers tecra A10 ping on the lan with 192.168.0.239 port, but he 192.168.211.36 the DHCP server.In Wireshark on tecra A10 I don't see demand for IGMP but no answer. On the

  • Windows install Service Pack 3

    A long time ago when I received the automatic update to Service Pack 3 and tried to install it, the update failed (Error 1706: file PRORET.) MSI not found).  I do not have the disk that he wanted me to insert to find the file and my attempts to find

  • free upgrade path - XP to Windows 7

    Is there a way of free upgrade from XP to Windows 7 that Microsoft offers? kindly help.

  • To recover items deleted

    original title: deleted items is it possible to recover items that were deleted from the Recycle Bin?

  • optical mouse with button magnifying glass

    optical mouse with button magnifying glass I have been using Microsoft Notebook Optical Mouse 3000 model 1049, since a few years. It has a maximize button. I would buy the same or a similar mouse (with the magnifying glass button), I'm not. Please te