Ocean Optics LabVIEW 8.2 drivers does not not with USB2000

Similar Questions

• Inconsistent behavior with Ocean Optics LabVIEW driver

  Hello

  I noticed an odd behavior when using the USB2000 Ocean Optics spectrometer. When I use the driver tools read the waveform, I get a waveform of pixels in length 2022. When I use the Ocean Optics (SprectraSuite) software I have a waveform of length 2048.

  I first noticed this problem when I was looking at the spectrum of a light source that is known to be ~ 870nm. Using the LabVIEW driver, I saw a peak at ~ 857nm, but using the Ocean Optics software, I saw a pic to 870nm as expected. Please let me know if you can give no indication to this problem. Thank you

  Gregory

  Just to be tied it on, I don't end up the front of the table of the spectrum with zeros to fill. It's certainly something that would deal with Ocean Optics (or the writer of the drivers). I do not change the driver because he could shoot me in the foot when you use one of the other patterns.

  Also, I noticed that for the USB2000 Set integration time VI, the time units are milliseconds. The USB4000 (and what is suggested by the drivers/examples) use the microseconds.

  Hope that these drivers can get an update soon!

• Keyboard Microsoft Wireless 1000 and a Microsoft wireless optical mouse 2000 - my computer does not start.

  Hello.

  I have Microsoft Wireless 1000 keyboard and an optical mouse wireless Microsoft 2000, they worked fine on my old computer with XP.

  Now, I bought an Acer Predator G3620 with Windows 7 and my computer does not start. He stops and beeps when it says "Press DEL to enter setup", this continues to the repeat. When I use the wired Acer keyboard and mouse the computer starts normally.

  When I inserted the original CD with the drivers, it gave an error of compatibility with this version of windows. So I downloaded the drivers and everything seemed fine. But when I start the computer (or reboot) I have to disconnect the transmitter/receiver or the computer stops and beeps.

  Once the computer is turned on, I can reconnect the transceiver, and it works fine.

  Find it me hard to believe that it has to bee like that.

  I have to buy a new keyboard and mouse?

  Brgs,

  Robert

  Go into the BIOS of the ACER and set it for legacy USB, USB mouse, USB keyboard, or along those lines...

  Then, go here for the drivers...

  http://www.Microsoft.com/hardware/en-us/downloads

• Satellite P300D-15O - display drivers does not-XP/Vista

  Hi all

  After buying this Satellite P300D-15O tried several times the reinstallation of operating systems: Windows XP Pro, Windows Vista x 32 and x 64 version, but does not display drivers offered by Toshiba downloads: it runs only the Windows standard vga drivers after you have installed and not working drivers for AMD/ATI HD3470.

  Max resolution is 1152 x 864. The laptop has been pre-installed with Vista Home Premium and good work and resolution of 1440 x 900 ATI drivers; but I want a new installation on my own without any addition of pre-installed software from McAfee/Google etc - The Toshiba telephone Customer Service can't help for this problem, they have NO answer, :(! Is there a solution with the inf files? Can anyone help!

  THX, endo

  Hello

  In my opinion, make you a huge mistake. Laptop with factory settings is perfect set up and all hardware components are working properly. OK, I understand you don't want to use some additional preinstalled software, but you must understand that you don't have to do it.

  I have absolutely the same option about it than you and the first thing I did with my Satellite P200D is to remove all the software, I don't want to have installed on the system.

  You can do the same thing. Go to the control panel > programs and features and then remove all the additional software. Later, install your favorite software and be happy with it.
  I do the same thing. Why install OS Vista own especially if you ve already paid for a Vista license.

  What do you think of this?

• 15 - p245sa: USB drivers does not not for the 15-p245sa

  Hello

  I recently put on windows 7 (downgraded from windows 8)

  All right, except that the USB is not working... No USB is detected or is even turned on.

  At first he could not update the driver by itself so I downloaded driver HP chipset and installed and now its labelled as:

  Mobile 5th generation Intel (r) Core USB Controller xHCI - 9CB1

  However, it made no difference and still make the USB does not work.

  Here is the hardware ID:

  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2293103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2293103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03

  compatible and ID.

  PCI\VEN_8086 & DEV_9CB1 & REV_03
  PCI\VEN_8086 & DEV_9CB1
  PCI\VEN_8086 & CC_0C0330
  PCI\VEN_8086 & CC_0C03
  PCI\VEN_8086
  PCI\CC_0C0330
  PCI\CC_0C03

  In the general tab, under device status, he said:

  No drivers are installed for this device.

  I'll look at the bios now, any other ideas?

  Thank you

  You are the very welcome.

  You need the driver for this device...

  Software and driver Broadcom Bluetooth 4.0

  File name: sp66402.exe

• In 2012 LabVIEW MathScript RT module does not work

  Hi all

  I recently installed LabVIEW 2012 in my PC with Windows 7. However, Mathscript does not at all. It says "an internal error has occurred in the MathScript RT Module.  Restart LabVIEW and try again.  If the error persists, reinstall the MathScript RT Module. "I did it, but still does not work. It is said further than Mathscript is missing or not installed", but I have installed. What the problem would be, please?

  Have you been able to verify the installation and activation in the License Manager OR? It should say enabled for this computer and have a green square like this:

  

• LabVIEW 2013 64 bit does not support the 'toolboxes connection database?

  Hello

  I have download the labview 2013 64 bit & registed with success

  But encount a problem when I try to install "2013DCT"(database connectivity toolkits)

  Don't LV2013 64 bit does not support this toolkit?

  If Yes, where can I find the boxes to tools for 64-bit?

  You can install the version 32 bits in a relavent LV and copy the installation.
  /Y

• LabVIEW 7.1 application does not work on Win 7 64 bit

  Hello

  I created an application with LabVIEW 7.1 and related Setup (including the support screws). After installation, the application works on Win XP 32-bit, Win 7 32 bit, but he can't find some analyze VI under Win 7 64 bit.

  Is a LabVIEW 7.1 all application running on Win 7 64 bit, or is it a different problem?

  The messages are that it does not find the screw following "Mean.vi", "ReadFFT.vi". Opens the window of the façade of the demand, but with a broken 'execute' button.

• DV7 - 6160ca usb 3 drivers does not

  So I did a fresh install of windows 7 on this laptop and the whole left side usb does not work and I can't get the usb3 drivers to load. I downloaded several different drivers on the website and none worked. The laptop has only four days.

  I found the drivers it's amd usb drivers 3. I never knew they did some lol. learn something new ever day. Would be nice if hp in the list of drivers in the title of the 6160ca driver page. Driver that worked for me was http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5098215&swItem=ob-97269-1&prodNameId=5098217&swEnvOID=4058&swLang=13&taskId=135&mode=4&idx=3

  My wireless was also broadcom who also wasn't on the list

  Thanks for your help.

• LabVIEW 2009 32 bit does not not on xp 64-bit

  Hi all

  I tried to upgrade to LabVIEW 2009 LabVIEW 8.6 on the XP machine 64-bit windows. After about a deletion of 2 hours of installation 8.6 and later of LV 2009 it turns out that the device drivers are not compatible with a 64-bit computer. At the launch of LabVIEW 2009 (32-bit), an error box is displayed indicating that it is corrupt or missing files and to fix this using the control panel etc. I tried this and still the same error occurs and LV refuses to start.

  All license files are correct and the components are enabled.

  Someone knows how to fix this? Or do I go back to 8.6 and cancel my subscription?

  Second, I use a firewire camera and was informed that neither IMAQ legacy are more supported and go to ni.com/ifo and enter legacy1394 to see how to download drivers for that etc. I find myself on a page that says no "authorized".

  Any help appreciated gratefully.

  Dear Leeser

  Since 2006, National Instruments has annually released a new version of LabVIEW each month of August in order to establish a more predictable release schedule. This allows users to better plan the new developments and improvements for future versions of LabVIEW. In addition, this year, NOR changed the name of the product to LabVIEW + year (for example, LabVIEW 2009) reflecting the year of the release and setting the stage for future annual editions of LabVIEW. Please see the following site for more information on this:

  http://www.NI.com/LabVIEW/product_lifecycle.htm

  What about Windows XP 64-bit it is not officially supported by hardware or software drivers. For a list of drivers who have been known to work, please see the link below:

  http://Joule.NI.com/nidu/CDs/fn/p/SN/N19: Windows.7809/lang/en

  Now with Windows Vista x 64 is a 32-bit compatibility of excellent "windows on windows" mode which allows our drivers work correctly. In regards to LabVIEW 2009, there is now a dedicated 64-bit version is recommended for use with 64-bit operating systems. Yet once Windows XP 64-bit is not officially supported.

  More details on the compatibility of Windows XP x 64 is located in the following article:

  http://digital.NI.com/public.nsf/allkb/C4EC0C87B6D70AA886256E61006568C8?OpenDocument

  I hope this helps to clarify some things.

  Kind regards

• Fingerprint reader drivers does not not on HP DV6 7060SF

  Hello

  I had to change my hd recently and I installed an SSD in my laptop. I also had to install W7 and I lost all my drivers and original software.

  I was able to get most of HP, but do not have the drivers for the fingerprint reader. The installation always stop. Maybe I forgot to install something before, or maybe I did it wrong.

  Can someone help me please?

  Thank you

  YD

  Hello YoungDreamer,

  Welcome to the HP Forums!

  I understand that you are looking for the pilot of fingerprints for the computer, because the fingerprint reader does not work. I can certainly help you! Choose a driver to download and install, based on the operating system of your computer:

  Windows 8, 8.1 - fingerprints of validity sensor driver

  Windows 7 - fingerprints of validity sensor driver

  After that the driver will install and this should solve the problem, restart the computer. If it is not, please let me know the operating system of the computer. Thank you and have a great day!

  Mario

• Pavilion dv6-6c53cl: dvd player not working not not after restoring - all missing drivers, does not appear in Device Manager

  Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box.  The dvd drive no longer works.  When you put a CD, you can hear him swirling but the screen does not open.  In addition, in the Device Manager section, dvd is not listed.  I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).

  I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it.  Clearly, I don't know enough about computers.

  In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that.  Obviously not used often.

  You can provide any help would be greatly appreciated.  The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little.  The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist).  Thank you!

  You may consider replacing the internal DVD player or using an external DVD burner.

• Audio drivers does not work after the upgrade to Windows 7 on Windows 8? Try this!

  If you're having audio problems with Windows 8 does not, I would recommend reinstalling the drivers from the swsetup folder. I've seen this work with some laptops, but your results may vary.

  1. go to your C:\ folder and search for "swsetup" and select this.

  2. once in this folder, find the folder "drivers" and select the "audio" folder

  3. once in the folder audio, we are looking for the file "setup.exe".

  4. select it and run it. Once completed, restart the computer.

  I hope this helps!

• HP G6 2240-sh gpu drivers does not properly

  Dear HP,

  I bought a HP Pavilion G6 - 2240sh C6C63EA 3 months ago. I am quite satisfied with the performance of every day, but I always had problems with the display drivers. I have Windows 8 X 64 pro and a Windows X 64 pro also 8.1.

  First I used it with Windows 8 with the latest drivers, which was available December 2013. Then I formatted my HARD drive (after a nasty virus) and clean then installed Windows 8.1 X 64 pro, so that the latest operating system. Since then, I have problems.

  There is no problem with the Intel HD4000, but the Radeon 7670 m did not work properly. I tried several drivers on the HP support site, the most recent is: AMD HD 1020-1022.

  When I pass any application (with a right click on graphics cards to office/switch) to use the Radeon it hangs or does simply not. VLC crashes always, Wolf Among Us does not even start.

  With the Intel card everything works, games included. My system says every time you start upward: "driver load.mm has just stopped working" (, so the there is a problem with the Radeon driver).

  I got fed up with this, formatted my HARD drive and then reinstalled Windows X 64 pro 8.1. Now, the system does not display this error: "load.mm driver has stopped working", however still applications do not work. It's the same as it was. But when I want to install the latest graphics driver Intel high definition (HD) it says: 'this machine does not meet the minimum requirements. I installed the latest .net also, but the error is the same.

  I found a guide here in this forum. I need to install the drivers in a specific way:

  1 Intel Chipset Installation Utility and driver, then restart

  2 Intel Management Engine Interface (MEI), then reboot,

  3. high-definition (HD) Intel Graphics Driver

  but at this point, I'm working in the same problem: "this machine does not meet the minimum requirements.

  In the Device Manager the Intel HD 4000 driver is present and functional.

  After that, I installed the Radeon driver. At startup, there is no problem, but when I go to use the radeon card of the problem previously. For example: VLC crashes, the games do not work.

  In summary: I normally use the intel VGA, but I can't use my Radeon card.

  After that, I tried the same process with Windows 8 X 64 pro, but the problem is the same. I even used former official HP Intel vga drivers, the message is the same: 'this machine does not meet the minimum requirements.

  I even tried the latest generic Intel driver. After you change manually the driver in Device Manager, driver setup intel a run and after a reboot the driver intel worked properly. However the Radeon driver still did not work. I can't even install a gereneric official AMD driver.

  Please help me to solve my problem. I am full of ideas. I would like to play games and watch movies BD with my Radeon card, but it does nothing like it.

  Thank you very much for your answer.

  However, I was able to solve the problem. I formatted the HARD drive again then install Windows 8 x 64 pro, then chipset inf, intel mei, then driver intel vga (he couldn't install again). After that, I installed all the drivers for windows 8 HP 2240sh and installed all windows updates. After each driver installation, I restarted the computer.

  Now it seems that everything is fine with my Radeon card, can I use it with games, video players and all, load.mm problem does not appear. The Intel card is also correct. Media Center is present in the Panel Intel and work (9.17.10.2849).

  The reason that I don't know, since I have tried to use these two drivers (what driver versions are different):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111605-1&CC=Hu&DLC=Hu&LC=Hu&OS=4132&product=5319684&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124655-1&CC=Hu&DLC=Hu&LC=Hu&OS=4158&product=5319684&sw_lang=

  Windows Update didn't download driver Intel (only realtek and synaptics)... This is strange.

  Best regards

  PS: I uninstalled the Radeon drivers, restarted the computer then used the tool that that you pointed out. He installed the generic AMD driver and it worked, but I could not switch graphics cards because the menu doesn't show after right click on the desktop. So I uninstalled, then used the official HP driver which works very well now.

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.