OCR - water bottle label

Similar Questions

• Creating wine bottle labels

  What is the best program to design a wine bottle label with? I'm looking for the best fit without spending an arm and a leg for features that won't be necessary

  Photoshop is not excessive. In fact lacks the features you need.

  You need a software to properly manage the typography and out all of the details, if you need a vector software: Illustrator, or something comparable as Corel Draw.

• How do you type several lines on a path? (upper slope of the bottle label)

  Wrong to describe the best I can...

  I make a label which will end around half superior from a bottle, the part that slopes down towards the beak.  For this reason, the label is actually shaped more like an ark so when it goes on the bottle, it will look more to the right.  The upper part of the label of course will be a tighter than the bottom half arc.  This is part of the reasons why it is difficult to get things to look right.  I know that I can bend a line at the same angle and type on it and he looks right, but I have a paragraph that I have to do this with, is worth about 5 lines.  I don't want to have to do a line of different for each path because it would be a nightmare to get each line perfect between them.  Is there a way to make the 'path' to work with several rows at a time?

  Spread the mixture. So if you want, put on the paths the text runs to succeed paths.

• How to move the label of a bottle of wine to another image?

  I shot two images of a bottle of wine.  We got the dark bottle, we label brilliantly flashed (so of course the bottle is not dark).  I can open both images in CS5, side by side, but no tutorial but managed to move the light dark bottle label, mainly because I am real new to this layers tips and tutorials most seem to leave out some key step or assume I know how to do the steps they mention.

  I'll open the two images side by side, select the light label, select the move tool and enter this label, move it to the other image, and it disappears behind the second image.  You all know what I am doing wrong, please help!  I want the light on the dark bottle label so I can keep as a final image.  Thanks for your help.

  Hello!

  So, I started using the Rectangle selection tool.

  I made a selection around the label:

  

  Then, right-click on the selection and choose "Layer Via Copy"

  

  Now, is right that new layer, and then choose Duplicate layer...

  

  When the duplicate later pops up, choose the image dark wine to move the layer to the other file:

  

  Now, you can see the light on the dark bottle label!

  

  Now for the fine tuning...

  With the new layer selected, click on Select > change mode quick mask...

  

  Now, the paint on the unwanted image to the layer parts:

  

  Click on window > edit in Quick Mask Mode to switch back again and click on the ""Add a layer mask ' icon: "

  

  Then, double-click on the layer and add a gradient overlay to simulate the shadow:

  You can try these settings:

  

  Now your label has a nice shadow!

  

  To follow...

• How to create a tableview for this?

  Hey, I was glued to this party for a long time and not able to find the answers, maybe I can get help from you guys.
  
  See I have a scenario where I have different 'items', which each will belong to a predefined category. These elements have different types and names (depends on the category), in turn, each of these types have a price.
  
  For example if I Item1 (water bottle), belongs to category 1 and there are different types: 200ml, 500 ml, 1000ml with labels of 10,20,30 price respectively.
  
  Similarly, I have Item2 (box of butter), belongs to Category2 and there are different types: 100 g, 200 g with labels of 15 and 25 price respectively.
  
  Now I want the data to appear on an editable table, when I press a button in the category, all items in the category (with the same type) must be included, with the sections divided into:
  
  
  The pressing of category 1
  
  
  NAME | PRICE |
  | 200ml | 500ml | 1000ml |
  | |
  Water bottle | 10. 20. 30.
  . . . .
  . . . .
  
  
  
  
  The pressing of category 2
  
  
  NAME | PRICE |
  | 100 GM | 200ml |
  | |
  Butter box | 15. 25.
  
  
  
  
  So, I want a dyanamic table which can have dynamic nested columns.
  
  I was trying to make a table of the class
  
  public class ItemVO()
  {
  String itemName;
  The list type < ItemTypeVO >;
  }
  
  and my ItemTypeVO has the following attributes:
  
  public class ItemTypeVO()
  {
  String typeName;
  Full price;
  }
  
  But not able to get anywhere with it.
  
  A lot of places I found dynamic columns with attributes like this:
  
  public class ItemVO()
  {
  String itemName;
  Type ItemTypeVO;
  }
  
  But it is not my job. I think so.
  
  Can someone help me with this change can I do in my class, so that I can make a table and provide me with a code as well.
  
  Thanks in advance.

  I don't really know what you're trying to do in this Test class.

  I mocked this upward with the object model, I proposed and the mock object data access codes hard just a few items and it works fine.

  Type.Java

  package itemtable;
  
  public class Type {
  
    private final String name ;
  
    public Type(String name) {
      this.name = name ;
    }
  
    public String getName() {
      return name ;
    }
  }
  

  Category.Java

  package itemtable;
  
  import java.util.ArrayList;
  import java.util.Collections;
  import java.util.List;
  
  public class Category {
  
    private final List types ;
    private final String name ;
  
    public Category(String name, List types) {
      this.name = name ;
      this.types = new ArrayList();
      this.types.addAll(types);
    }
  
    public List getTypes() {
      return Collections.unmodifiableList(types);
    }
  
    public String getName() {
      return name ;
    }
  
    @Override
    public String toString() {
      return name ;
    }
  }
  

  Item.Java

  package itemtable;
  
  import java.util.HashMap;
  import java.util.List;
  import java.util.Map;
  
  import javafx.beans.property.DoubleProperty;
  import javafx.beans.property.ReadOnlyObjectProperty;
  import javafx.beans.property.SimpleDoubleProperty;
  import javafx.beans.property.SimpleObjectProperty;
  import javafx.beans.property.SimpleStringProperty;
  import javafx.beans.property.StringProperty;
  
  public class Item {
    private final StringProperty name ;
    private final ReadOnlyObjectProperty category ;
    private final Map prices ;
  
    public Item(String name, Category category, Map prices) {
      this.name = new SimpleStringProperty(name);
      this.category = new SimpleObjectProperty(category);
      this.prices = new HashMap();
      for (Type type : prices.keySet()) {
        validateType(type);
        this.prices.put(type, new SimpleDoubleProperty(prices.get(type)));
      }
    }
  
    public String getName() {
      return name.get();
    }
    public Category getCategory() {
      return category.get();
    }
    public double getPrice(Type type) {
      validateType(type);
      return prices.get(type).get();
    }
    public void setName(String name) {
      this.name.set(name);
    }
    public void setPrice(Type type, double price) {
      validateType(type);
      prices.get(type).set(price);
    }
    public StringProperty nameProperty() {
      return name ;
    }
    public ReadOnlyObjectProperty categoryProperty() {
      return category ;
    }
    public DoubleProperty priceProperty(Type type) {
      return prices.get(type);
    }
  
    private void validateType(Type type) {
      final List allowedTypes = category.get().getTypes();
      if (! allowedTypes.contains(type)) {
        throw new IllegalArgumentException("Cannot set a price for "+type.getName()+": it is not a type for the category "+category.getName());
      }
    }
  }
  

  DAO.java

  package itemtable;
  
  import java.util.List;
  
  public interface DAO {
    public List getCategories();
    public List getItemsByCategory(Category category);
  }
  

  MockDAO.java

  package itemtable;
  
  import java.util.Arrays;
  import java.util.HashMap;
  import java.util.List;
  import java.util.Map;
  
  public class MockDAO implements DAO {
  
    private final List categories ;
    private final Map> itemLookup ;
  
    public MockDAO() {
      final Type spreadType100g = new Type("100g");
      final Type spreadType200g = new Type("200g");
      final Type drinkType200ml = new Type("200ml");
      final Type drinkType500ml = new Type("500ml");
      final Type drinkType1000ml = new Type("1000ml");
      final Category spreads = new Category(
          "Spreads",
          Arrays.asList(spreadType100g, spreadType200g)
      );
      final Category drinks = new Category(
          "Drinks",
          Arrays.asList(drinkType200ml, drinkType500ml, drinkType1000ml)
      );
      final Map waterPrices = new HashMap();
      waterPrices.put(drinkType200ml, 10.0);
      waterPrices.put(drinkType500ml, 20.0);
      waterPrices.put(drinkType1000ml, 30.0);
      final Map pepsiPrices = new HashMap();
      pepsiPrices.put(drinkType200ml, 25.0);
      pepsiPrices.put(drinkType500ml, 45.0);
      pepsiPrices.put(drinkType1000ml, 75.0);
      final Map butterPrices = new HashMap();
      butterPrices.put(spreadType100g, 15.0);
      butterPrices.put(spreadType200g, 25.0);
      final Map margarinePrices = new HashMap();
      margarinePrices.put(spreadType100g, 12.0);
      margarinePrices.put(spreadType200g, 20.0);
      final Map mayoPrices = new HashMap();
      mayoPrices.put(spreadType100g, 20.0);
      mayoPrices.put(spreadType200g, 35.0);
      final Item water = new Item("Water", drinks, waterPrices);
      final Item pepsi = new Item("Pepsi", drinks, pepsiPrices);
      final Item butter = new Item("Butter", spreads, butterPrices);
      final Item margarine = new Item("Margarine", spreads, margarinePrices);
      final Item mayonnaise = new Item("Mayonnaise", spreads, mayoPrices);
  
      this.categories = Arrays.asList(drinks, spreads);
      this.itemLookup = new HashMap>();
      itemLookup.put(drinks, Arrays.asList(water, pepsi));
      itemLookup.put(spreads, Arrays.asList(butter, margarine, mayonnaise));
    }
  
    @Override
    public List getCategories() {
      return categories ;
    }
  
    @Override
    public List getItemsByCategory(Category category) {
      return itemLookup.get(category);
    }
  
  }
  

  ItemTable.java

  package itemtable;
  
  import javafx.application.Application;
  import javafx.beans.value.ChangeListener;
  import javafx.beans.value.ObservableValue;
  import javafx.scene.Scene;
  import javafx.scene.control.ChoiceBox;
  import javafx.scene.control.TableColumn;
  import javafx.scene.control.TableColumn.CellDataFeatures;
  import javafx.scene.control.TableView;
  import javafx.scene.control.cell.PropertyValueFactory;
  import javafx.scene.layout.BorderPane;
  import javafx.stage.Stage;
  import javafx.util.Callback;
  
  public class ItemTable extends Application {
  
    @Override
    public void start(Stage primaryStage) {
      final DAO dao = new MockDAO();
      final ChoiceBox choiceBox = new ChoiceBox();
      choiceBox.getItems().setAll(dao.getCategories());
  
      final TableView table = new TableView();
      final TableColumn nameCol = new TableColumn("Name");
      nameCol.setCellValueFactory(new PropertyValueFactory("name"));
      final TableColumn priceCol = new TableColumn("Price");
      table.getColumns().addAll(nameCol, priceCol);
  
      choiceBox.getSelectionModel().selectedItemProperty()
          .addListener(new ChangeListener() {
            @Override
            public void changed(ObservableValue observable, Category oldValue, Category newValue) {
              table.getItems().clear();
              priceCol.getColumns().clear();
              for (final Type type : newValue.getTypes()) {
                final TableColumn col = new TableColumn(type.getName());
                col.setCellValueFactory(new Callback, ObservableValue>() {
                  @Override
                  public ObservableValue call(CellDataFeatures cellData) {
                    Item item = cellData.getValue();
                    if (item == null) {
                      return null;
                    } else {
                      return item.priceProperty(type);
                    }
                  }
                });
                priceCol.getColumns().add(col);
              }
              table.getItems().setAll(dao.getItemsByCategory(newValue));
            }
          });
  
      BorderPane root = new BorderPane();
      root.setTop(choiceBox);
      root.setCenter(table);
  
      Scene scene = new Scene(root, 600, 600);
      primaryStage.setScene(scene);
      primaryStage.show();
    }
  
    public static void main(String[] args) {
      launch(args);
    }
  }
  

• iPhone iOS version 9.3.1 6s (13E238) how to give permission to the application to use the camera?

  I have a new application of wine and she requires access to my photo library for photo of wine bottle labels to rate wines. Where is the privacy > settings? I have on my iPhone go to settings > privacy and he says, Apps that have requested access to the camera will appear here. In settings > general > restrictions I have camera without restriction, and in the settings, I have the app in question, delectable 'allowed' to access to cell phones and camera data. I can not yet use the camera to show delectable wine, I ask to be evaluated. So what I'm doing wrong?

  I just checked with the delectable app on iPhone and it still says: "this application has no access to photos or videos" and you can activate membership privacy Setttings. There are no. privacy settings in my settings of the iPhone.

  However, this question seems more associated with iOS app, you can try a forced reboot. I contact the developer of the app and ask them for suggestions.

  Force restart:

  Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You will not lose anything

• Basic tips to keep your printer running longer.

  Everyone whats to get the most for their money, but many people do not know or realize, that you have to put in a little effort to keep things smooth.  Just as if you want your car to last for 1 million miles, you need to do regular maintenance.  If you want printer last more than 2 years, you must do a regular maintenance for her as well.  Granted it is not oil to change, or the transmission to the service, but there are rollers that need cleaned and nozzles that need to rinse.

  For all the problems I have all come to work on printers, one I saw put more that it's fair share of printers low is the simple paper jam.  The jam itself is rarely the culprit.  The error message is normally what causes the need for replacement.  The error message might get stuck on the screen and turn your printer brick quite expensive.  The best way to avoid this problem is to not get a paper jam.  Paper jams are actually fairly easy to avoid.  Just a simple cleaning of the rollers with a lint cloth (coffee filter or lens tissue are best, but paper towels work in a pinch) and bottled water are the best things to use.  The lint cloth and water bottles are free of contaminants and ensure that any partial microscopic don't stay on the rolls.  If you're wondering which rolls to own, a good rule of thumb is just to clean one of them you can see and reach safely.  Remember to turn off and unplug the printer before performing any cleaning or before you get into the machine.  You must clean the rolls at least once every six months earlier if you have a problem of dust.

  The next thing I saw leading printers must be replaced, was a print head that was out.  If the printhead goes out, the only options are to replace the print head or the printer if the print head is not replaceable.  Which can be expensive anyway.  The best things you can do to keep your print head is to let your printer is a regular maintenance, clean the print head no matter when you replace an ink cartridge and align the print head no matter when you replace an ink cartridge.  The steps to follow those who depend on the printer you have.  You should be able to find more information a cleaning and print head alignment here.

  Something I have seen a lot, but never really caused replacements, were related to food.  Most of the customers of HP don't know that the printer they bought was built in the surge protector.  It is to have important information.  The reason why it is important is because if you plug a surge protector in an another surge protector, or power strip protector, the device you're trying to power, no matter what it is, will not be able to get all the power they need.  This is very true for printers.  Printers have a sleep mode, which reduces the power they use.  When the printer goes to wake up, it consumes more energy than normal, and a power strip or surge protector, be read as a hint of power, however the built in surge protector knows what is happening.  The first protector of power surge or power strip, will block the necessary extra power and cause errors on the printer.  To avoid this, simply plug the printer directly into a wall outlet.  If a socket cannot be made available, use an extension cord to power the printer from another outlet directly.

  These are the three main things I noticed that cause people to have to replace their printers at the beginning.  Now these things won't keep things of bricking of your printer, but it will go a long way to prevent them.

  I hope this helps.

• Help with the code if possible.

  Hi again = D adobe community!

  IM VERY new flash, but have been crocheted line and weighed after trying to make my own game! I learned a lot (in my mind) in the short time I've been using flash. But like any new person I need a hand every once in a while ...

  And im stuck so I think I might need a lot of help (then again im new would be too difficult to grasp)... but we shall see.

  OK, I looked everywhere on the internet for a tutorial or a guide or a little info on an inventory system that works with the mouse and not crash.

  everywhere wherever I look I find guide on how to do these inventorys of collision, but nothing like the one I'm after.

  OK so I have _global.bottleofwater = 0; like my var.

  I also added the element of water bottle, which gives the code

  on (release) {}

  _Global.bottleofwater += 1;

  }

  But outside the flash registration I indeed had a bottle of water id also like to appear in my inventory. I tried to give him just a dynamic textbox(that worked), but then I wanted to make a usable item and not only a key to enable me to move to a new setting... so I tried to make the dynamic box a button, whereas if I click on the box it would consume the bottle of water (except of course the amount 0)... who did not flash mx unfortunate... he launched my game without error... but when I mouse over My dynamic box (which is also a button), overall the program crashes.

  Please any help!

  IM using Flash MX and I am VERY new so please answers to understand I'm new and I'm learning.

  It's good that you worked on it!... because there is nothing in the code you showed would break a file.

• Get the page to validate in WC3

  I have two pages I have forms on. I'm getting errors

  on the two pages of the section of the form of the pages on the validator 3 Toilets. How can I get the pages to validate the WC 3?

  Here is the code for the form:

  < div id = "form" > < h3 > Contact form < / h3 > < form action = "FormToEmail.php" name = "Contact form" method = "post" > "
  < fieldset > < div id = "label" > < label > name: < / label >
  < br >
  < input name = "Name" type = "text" id = "Name" size = "30" / >

  
  < / label >
  
  < / div >
  < div id = "label" > < label > address: < br >
  < input name = "Address" type = "text" id = "Address" size = "30" / >
  < / label > < / div > < div id = "label" > < label > City: < br > < input name = "City" type = "text" size = "30" / >
  < / label > < / div > < br >
  < div id = "label" > < label > phone number: < br > < input name = "phone" type = "text" size = "13" / >
  < / label > < / div > < br >
  < Lablel > e-mail address: < br > < input name = "email" type = "text" / > < / label > < br > < / fieldset >
  < fieldset >
  < label >
  < br > the elements you are interested in: < br >
  < p >
  < label > < input name = "services" type = "checkbox" / > heating < / label >
  < label > < input name = "cool" type = "checkbox" / > air conditioning < / label >
  < label > < input name = "solar" type = "checkbox" / > solar < / label >
  < br > < label > < input name = "isolation" type = "checkbox" / > insulation < / label >
  < label > < input name = "Plate" type = "checkbox" / > sheet < / label >
  < label > < input name = "water heaters" type = "checkbox" / > water heater < / label >
  < /p >
  < br >
  < p > < input id = "Submit" type = "Submit" value = "Submit" / > < strong > < / strong > < / fieldset > < / form > < / div >

  Then the other page has this code for the form, and it is not validate either:

  "" < form > < input type = "button" value = "print this coupon"
  onclick = "Window.Print (); return false; "/ > < / make >

  Any advice/help is greatly appreciated.

  Thank you!

  That's all you need:

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Dilema nested Style

  Hello

  Ok... I have this nested style, I've been using call letters in our catalog. Basically, there are 3 styles of character: body and 2 additional for the kerning amount before the letter of appeal and after the period of the call letter just before the description. Here's an example: I enclose a real test file, so perhaps someone could watch my nested styles.

  Basically, here's what works:

  A. Bowling ball. B. tennis racket of. C. ring of superman. D. Golf Club. E. Soccer ball for children. F. ladies espadrilles. G. socks men. H. frogs jump. I. small fish. J. water bottles. K. Snoopy dolls.

  It works very well... unless we have a line of type before the first call letter, like this:

  Check out these great gifts. A. Bowling ball. B. tennis racket of. C. ring of superman. D. Golf Club. E. Soccer ball for children. F. ladies espadrilles. G. socks men. H. frogs jump. I. small fish. J. water bottles. K. Snoopy dolls.

  Basically I have the body through 1 character style sheet., then I have the smaller main character through 1 character style, then I will go back to the body for 1 character style sheet., then the 2nd sheet of character style for the largest amount of kerning by 1 character then again the style of characters in the body through 1. and then again the style of character through 1 character... etc etc etc...

  But, once I add a copy to the front, it's a mess.

  Is it far from isolating just call letters to a certain style before it and after it? perhaps through GREP, if not through this?

  Please let me know if I clouds provide more information. I also noticed that I have lack of nested styles I might add... I think that there is a limit? At the moment I am the letter k, I might add that no more too to keep it going.

  There, any suggestions are greatly appreciated. Yet once, there is a file attached for better view.

  Thank you

  Babs

  I'll assume that you're using CS4.

  I will first answer the limited number of nested styles.  You make it too difficult. You should only define the 4 first nested styles based on what I saw in your document.  On the 5th nested style, set it on [Repeat] 4 latest styles. This will repeat the series of styles nested until the end of the paragraph.

  

  Then, in order to resolve your dilemma with the sentence that leads to the list, create a paragraph second, based on the first style. Add a new style nested until the beginning of the list, the value [no] through 1 sentence.

  Apply any paragraph style is appropriate based on the content.

  -mt

• More redundant data removal!

  Sorry to ask another question so fast, but the answer to my previous question was so triumphantly well, I thought I might give this one a go!
  
  I have a string: "power, station, power plant, generator, power plant.
  Who turns in "power plant, generator, power plant.
  
  The rules of this transformation are:
  
  1 splits the string into units of Word separated by comma (I have a function to do).
  2. test each word to see if it contains spaces.
  3. If she has no seats, it is an expression. If it isn't, it's a stand-alone Word.
  4. divide a phrase in its component words (so divided 'powerhouse' in 'power' and 'station', for example)
  5. If one of the component words appear in the independent origin as words string, then the stand-alone Word fell, and only the expression is preserved.
  
  So here's another example, if the string was 'red, hamster, food, Hutch, hamster in a red Hutch, water, the bottle', then the output should be "food, hamster in a red Hutch, water, the bottle". The words stand alone 'Reds', 'hamster' and 'hutch' are eliminated because they appear in the expression "hamster in a red Hutch.
  
  There may be any number of words in a string. The string can contain a number of words in an order any. Would be nice if the output could be in alphabetical order. And I want a function to do this, by which I enter the string exactly as shown in my examples above, and the correct output is returned as a string.
  
  I have a code that can do steps 1 through 4, but I can't nail the ILO to eliminate independent words of the original string while maintaining intact expression. And my code in any case plods still with nested for/next loops and a lot of if... then tests. Judging by the results of my previous question here, I'm sure there are better ways to do it. Can certain Wizard SQL direct me to magic, please?

  A start...
  (Tested for data)

  SQL> create type var_table as table of varchar2(100);
    2  /
  
  Type created.
  
  SQL> create or replace function fn(p_str varchar2) return varchar is
    2      tok varchar2(100) := ' ';
    3      str varchar2(4000) ;
    4      i number := 0;
    5      t var_table := var_table();
    6     begin
    7      while tok is not null
    8      loop
    9       i := i+1;
   10      tok := ltrim(rtrim(regexp_substr(p_str,'[^,]+',1,i)));
   11      if instr(tok,' ') = 0 then
   12       if instr(p_str,tok||' ') = 0 and instr(p_str,' '||tok) = 0 then
   13        t.extend;
   14        t(t.count) := tok;
   15       end if;
   16      else
   17       t.extend;
   18      t(t.count) := tok;
   19      end if;
   20     end loop;
   21     for rec in (select column_value from table(t) order by column_value) loop
   22      str := str||','||rec.column_value;
   23     end loop;
   24     return ltrim(rtrim(str,','),',');
   25    end;
   26  /
  
  Function created.
  
  SQL>  select fn('red,hamster,food,hutch,hamster in a red hutch,water,bottle') str  from dual;
  
  STR
  --------------------------------------------------------------------------------
  bottle,food,hamster in a red hutch,water
  
  SQL>  select fn('power, station, power plant, power generator, power station') str  from dual;
  
  STR
  --------------------------------------------------------------------------------
  power generator,power plant,power station
  

  Published by: JAC on April 9, 2009 11:09

  Areas of attack and trasiling managed

• label of failure of OCR

  I'm new to OR vision and in the process of drafting the label control. The goal is to verify all of the printed labels are no defects before ship out to the customer.

  the step is: -.

  1. I have formed an image of 'A' in the vision of OCR/ORV Wizard and saved in a file characther.

  2. I inspect the letter 'A' back partition is 1000 (as aspected because that I trained with the same picture)

  3. I voluntarily change the letter 'A' paint wipe a line down the middle and save as new image, but when you use OCR/OCV always read 'A' (infact it default already)

  4. try the game with the threshold size, read option setting still not able to get my result expected.

  question:

  1. how I don't see the failure of the letter 'A '? the score is very high as well (999) after I purposely default it.

  2. the wizard of vision claim he can do the OCR/OCV, but I only see OCR function and is unrelated to the function of GCO.

  Hi Klloo

  By controlling the size of the characters, you can fail A vice.

• How can I make a label of wine bottle nonrectangular in 3D in Photoshop CS6?

  I got pretty proficient with Photoshop CS6 3D tools, but the mesh of the integrated wine bottle gives me a headache.

  I would like to make the label of a bottle of wine, some other rectangular. But when I use an opacity card to control the shape of the label (to make circular, for example), the bottle becomes as transparent. I have not found a way to make the transparent label areas while leaving the glass not affected. I tried black on the card as well as the transparent opacity (WARNING: no pixels). Whatever it is, the glass also disappears. In fact, if I'm trying to keep it smaller than its original size and same label rectangular - using black, transparent, or even cropping of the opacity for a smaller size card, it always affect the same area of the bottle glass (see picture). Glass is 100% opaque and has No card opacity.)

  
  

  This could be a bug CS6?

  Thanks in advance for any help.

  Darrell

  -------------------------------------

  

  
  

  I think that I thought about it.

  1. With your material label layer selected, go to the properties panel. Under opacity, select 'New Texture'. Make the size of the file of the same size as your material of the main tag that surrounds the whole bottle.
  2. Create a black mask / white standard, the white area being your irregular shape.
  3. Save on the .psb. You should see only the areas you want to be opaque have now been hidden.

  I would also add that you must set the color of "Diffuse" your label to the same as the material of your bottle, as well as the correspondence the other properties (refraction, specular, etc.) so that the 'glass' corresponds to...

  Hope that helps!

• Hi I want to get an Acrobat application and SDK to convert PDF OCR, .tiff and .jpg and add wat

  Hi I want to get an Acrobat application and SDK to convert PDF OCR, .tiff and .jpg, add watermark and the reduction in size of files, all in a single product

  Yes, Acrobat Pro can do. The SDK is free t o download.

• I'm covering a bottle of wine with a label and to remove the date on it. I deleted the date, but how to restore the color to the same color as the label? Essentially, I want to wipe this number on my tag without altering the color

  Help!

  Victor,

  If a raster image, it is much better to do it in Photoshop.

  If it is a vehicle for work on top of a color, you should be able to simply select the live/outline Type object and delete it. If this is a carving, you should be able to select the routes involved and the Pathfinder > unit. Or something else.