OCR when scanning documents on a 1512?

Similar Questions

• Photosmart premium C309g-m: lack of disk space when scanning documents in pdf format for PC

  When you try to scan documents to pdf format on my computer (connected via a wired network), including multiple pages, the throws of sweeping to the top of this error message 'More disk space - remove unused files to free disk space' the error code below is 4, [(3,11,0)].

  I seem to be OK with a single page at low resolution in B & W - 150 dpi but not more than a few pages to this resolution, or even a single page to a higher resolution and the error message is thrown upwards and will not save the file. Clearly I'm not memory hard drive because there is a lot of space and I tried recording on multiple disks.

  If I scan everything straight to a USB stick plugged into the printer it works OK but scan documents as a picture and crops, more it only scans one page and then save it.

  I tried to install a patch from this forum question http://h30434.www3.hp.com/t5/forums/postpage/board-id/Scan but it made no difference and my windows 7 was not an upgrade of vista

  Hope someone can help with this

  Hi Oscardod,

  You are welcome!

  I guess one inadvertently lead solution, is always a solution! Laughing out loud.

  I'm glad that everything is fine.

  Best regards!

• error message & screen and E-mail program freezes when scanning document

  Cannot attach a document scanned in windows mail, keep getting error message & screen/e-mail program freezes

  Scan the document first, then compose the e-mail message and then use Insert | Piece attached or just drag the file on top of the message to attach it.  In addition, if the file is very important, that it will take time to treat it because it must be coded to check the size of the file.

  Steve

• Have been scanning documents and has reached 999, does not continue. How to be able to scan additional documents

  When scanned documents reached 999 img is unable to continue.  How additional documents can be scanned.  Thanks for any input.  Steve

  Hi Steve,.
  without knowing the details of your system, scanner, or scanner program, it is somewhat difficult to solve the problem.
  Right on the top of my head, there must be a way of compensation/reactivate this number in the scanner software. I would like to seem so your documentation or contact the manufacturer.
  B Eddie

• How can I turn off automatic OCR during editing of scanned documents?

  When I use the Edit function, normally I just rearrange a few images in a scanned pdf document.  Unfortunately, clicking on the "Edit" button automatically performs OCR, which sometimes causes problems.  For example, when I'm working with is a scan of a document written by hand, the causes of OCR errors in the police, so in this case I don't want rock.

  We have already OCR a document to the will in several menus, for example to improve scans or optimize PDF, so I do not understand the need for automatic OCR forced when you change the file.  Developers must understand that OCR is not something, we always need or want.

  In the settings menu to change of scanned Document, there is an option to disable "make all editable pages', in which case only the current page is OCR' ed.  There is, however, no option to completely disable OCR, which makes no sense.

  

  Is it possible to turn off OCR during the use of change?

  Thank you.

  Read this:

  Re: How to stop automatically convert to text in Acrobat DC when I want to edit a pdf file?

• When I scan documents with HP Photosmart 7510 ADF, how can I stop the pages to be marked?

  Hello

  I use a HP Photosmart 7510 (model No. C311a, product no. CQ877B)

  When I scan documents using the automatic document feeder, they are more often (80%) marked left.  It seems to be caused by the wheel which initially grabs the book.  It provokes a black spot of the width of the wheel to be left on the page.

  The mark appears about a quarter turn to the bottom of the page and is about 1/2 cm in height, but is very sensitive.  Sometimes, another brand is left a little further down the page and sometimes these two brands are accompanied by a very reduced, but still noticeable grey banner (again I believe caused by the wheel).

  The brand is very visible not only on the scanned now but also (of course) in the pdf file that result, and since I'm on this printer for things like job applications, it's not big.

  Other people know about this?  If Yes, is it possible to fix it or must return the defective printer?

  See you soon,.

  silverShnoop

  Hello silverShnoop

  Such problems can sometimes be caused by dirty rollers or the parts of the ADF (automatic document feeder). The following instructions (whereas for a different problem) contain instructions for the cleaning of the AAD.

  The ADF (ADF) captures no paper

  There is another article that could help as well. It contains instructions for cleaning the scanner glass.

  Vertical stripes, lines or streaks in the Copies or Scans

• OfficeJet Pro 8600 more. No menu auto scan when loading documents in the ADF?

  I have an Officejet Pro 8600 more again to replace the L7780 who brought up the menu scan, when a document is loaded into the autofeeder.  How can I get the only 8600 to do the same.  I find that I liked the convenience of the automatic menu, but it does not come to the top when I load the document (s) to scan in the ADF.  This feature has been discontinued?

  Thank you.  I do enjoy the printer but miss this feature that I scan all my documents in my computer to avoid to keep a lot of paper.

• a signature can disappear from a scanned document when send you it?

  I sent a scanned document from my computer which contained my signature and the date it was sent.  People of office says he came unsigned.  Is it possible to have the signature disappear from the emailing document comes from my computer to theirs?

  Continuous thread:

  Thank you, it was sent as an image.

  I scanned the document as an image, so I'm told and lie?

  If the document has been scanned as an image and sent as such so the signature should be there and you just sent the wrong file.

  If the document has been converted to PDF by the OCR scanner program then the signature may have been left as an image embedded in the PDF file. In this case, it is possible to distance the image of the signature does not appear on their PDF reader.

  Scan the document signed as an image and recheck the attachment before you send it. If they can see the image, they can see your signature, because the two will be part and parcel of the same thing.

• File type by default when you save a scanned document.

  Currently when I scan in the documents to be saved in synergy (programme of work) I have to manually change the type of file to PDF format.  Is there a way to default showing all files when you save a scanned document?

  That would be a question of support of synergy. Or through their documentation.

• Why I said no e-mail program when you try to send a scanned document

  Just bought the new laptop HP Pavilion and new HP printer all in one.

  First of all, I'm stuck with Windows 8 (horror! after XL)

  In addition, never used a scanner before.

  Configure printer OK. Not sure where the scanned document should go in 'Library', but managed to find a picture I had scanned.

  When you want to send the picture, I get a message that basically said...

  No e-mail program to perform the requested action. Install an e-mail program or, if you have already installed, create an association in the default programs control panel...

  as far as I can see, in the default programs control panel, when I click on the EMAIL he just said Microsoft windows. Cannot change, delete, replace... cannot do anything.

  I don't know that I'm being stupid. I have no one to ask. I am nearly 70, do not understand half of what is all about. Can anyone help - in understandable English, please.

  Thank you

  Just bought the new laptop HP Pavilion and new HP printer all in one.

  First of all, I'm stuck with Windows 8 (horror! after XL)

  In addition, never used a scanner before.

  Configure printer OK. Not sure where the scanned document should go in 'Library', but managed to find a picture I had scanned.

  When you want to send the picture, I get a message that basically said...

  No e-mail program to perform the requested action. Install an e-mail program or, if you have already installed, create an association in the default programs control panel...

  as far as I can see, in the default programs control panel, when I click on the EMAIL he just said Microsoft windows. Cannot change, delete, replace... cannot do anything.

  I don't know that I'm being stupid. I have no one to ask. I am nearly 70, do not understand half of what is all about. Can anyone help - in understandable English, please.

  Thank you

  Hello

  If you are simply trying to select an image file, right click and select send to/recipient of the message, it will not work if you are using the default Windows 8 App Mail.

  You must have a Desktop Email program is installed to do this, such as Windows Live Mail, which is part of the Windows Essentials range.

  Windows Live Mail - free

  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-other-programs

  To attach the image using Windows 8 Mail App, open the Mail application and select new email message.

  Click on the paper clip icon in top/right (attachments).

  Navigate to the folder where the image is stored and Select the file.

  Click the button to join at the bottom of the screen.

  This will attach the file to the new email.

  Let us know if you have any other questions.

  Concerning

• Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.

  Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.   Anyone know if it's related to Adobe or Outlook?  I am able to send emails on Outlook.

  Thank you

  Hi lorid74531323,

  Latest version of MS office will not work with your Acrobat 9.

  May be a compatibility issue, please check the web browsers and applications of PDFMaker

  Kind regards
  Nicos

• Why hangs Arcobat DC Pro on page 2, when scanning a document via the document feeder?

  Why plant Arcobat DC Pro on page 2, when scanning a document via the document feeder?

  I m using an OS X 10.10.4 system and a HP LASERJET PRO 200 COLOR MFP M276.

  Before the latest updates, it was no problem to create a PDF file from a multipage documents in the document feeder, but not she scann process stops at the second page. When I use the Scanner directly from the system I ve no problem and I can save documents in a PDF document. I reinstalled Acrboat DC but no effect. The Scanner still works in the part of the system, but not with Acrobat...

  Someone at - it an idea?

  Thorben

  Hi, Rave,

  the problem occurs for the latest updates. I have now I reinstalled it Acrobat DC and scanner completely.  Now everything works again and I can create PDFs directly from the scanner as before. Boredom, it is then that your work you don t you want to reinstall everything... also it took a lot of time to find the problem and finally to find support in the Adobe support "labyrinth." Now, I disable the cloud customer and work with the system running.

  Thank you for your answer!

  Best regards

  Thorben

• The present no embedded fonts in scanned documents containing plain text are not get converted fonts incorporated after OCR applied. But the texts are searchable. The text even unincorporated font that is formatted as text (not scanned) become stupid

  The present no embedded fonts in scanned documents containing plain text are not get converted fonts incorporated after OCR applied. But the texts are searchable. Even fonts not embedded text that is formatted as text (not digital) are themselves converted to fonts embedded by adobe distiller.

  Fix. Expected behavior.

  Output of the OCR is not incorporated. With Acrobat Pro, a preflight check is available to embed the fonts.

  On the use of Distiller - using a work option distill configured appropriately that the PDF created from the authoring application (FrameMaker, InDesign, MS Word, etc.) will have embedded fonts.

  Be well...

• Photosmart 5520. How can I insert pages in a PDF Document when scanning?

  I woul would send a PDF single file to my contacts with more than one scanned page, but I don't understand how I can do it. Thank you very mach.

  Hello

  For Windows, try it please:

  • Double-click the icon of the printer on the desktop,
  • Click Scan Document or Photo
  • Select options... and scan page #1
  • Click on + to add more page (s)

  

  Kind regards.

• Error when scanning to PDF with OfficeJet J6413

  Hello

  Today I installed the printer on a Vista Ultimate 64 bit system (SW version is 100.100.065.000), after using it for more than 2 years on a Windows 7 computer. The printer is using the network driver.

  Printer: HP OfficeJet J6413 (EMEA region)

  Firstly, installation went smoothly, but it seems as if all components have been installed on the 3rd attempt (remove + restart + install).

  When you scan a PDF document using the HP Solution Center, the following error message is displayed (after that saying is not more pages, so a record sequence begins).

  Title: Error!

  Message:

  "

  An expected internal error occurred. Click OK to close the program, and then try the following:

  -Restart the program.

  -Restart the PC and then try again.

  -Reinstall the software photos & images and try again.

  8, [(6, 16,-2147221488)]

  "

  (Numbers below also appear in the dialog box).

  Not to mention that each of the above has worked and keeps the suggted error to appear, even during the scanning of the printer directly (scan to...).

  I'd appreciate your help with this.

  It has not happened before on Windows 7.

  Thank you

  Moti.

  Hello

  I think that it is related to the OCR settings, which may react with various versions of Adobe reader differetly...

  In order to solve the problem, try the following steps:

  1. Open HP Solution Center
  2. Click scan Document
  3. Click change settings
  4. Select the Scan PDF shortcut, and then click Save in the file saving Options.
  5. Change the OCR language settings in English (United States), and then click OK.
  6. Click Save a shortcut to Scan, as the Scan shortcuts list column.
  7. Provide a name for the shortcut created picnic and approve

  Now, try scanning using the shortcut updated scan.

  Please let me know any progress,

  Shlomi