ODD on my Satellite C70D-A-11F will not read DVDs

Similar Questions

• Satellite P10: The drive will not burn DVD

  Hope someone can help me,

  I have a Toshiba Satellite P10 and have just received some photos software, burning
  But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
  What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

  I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

  I have the Nero log file failed
  Done if it's any help to anyone.

  A big thank you Michael.

  Hello

  What about different DVD media? Have you tested the media DVD-R or DVD + R common?
  Have you tried different brands of DVD?
  I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
  So I think you should check different DVDs.

• SD-R2312 will not read DVD or CD in Tecra 8100

  My DC - ROM drive (SD-C2302) died. I bought a second hand SD-R2312 indicating various Web sites should work. I installed the connector of the previous disc and put it in the Tecra.
  The Tecra struggled to recognize the drive but remove and reinsert the drive sets. Device Manager recognizes the drive SD-R2312 and reports that it works correctly.
  However, the drive will not read anything. It vibrates far and finally tells me that the disk is not formatted. I tried pressed CDs and DVDs and burn CDs and DVDs (all - R). These are all the discs that can be read on my other machine.
  So, please:
  What can I do to make it work (and where can I get the update of the drive/firmware/BIOS)
  or is this idea a waste of time, in which case, how will I know what CD drives are compatible with the 8100.
  Thanks for any information.

  Hello

  You can find updates on the Toshiba support page
  _eu http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=eu&ID=Support_Homepage

  But as you can not read any disc, I think that your drive is defective.

  Good bye

• Workstation XW8000 with XP recognizes the new DVD player but will not read DVDs

  I just added a DVD player for my HP xw8000 workstation. It is being prepared to try installing Windows 7. Windows 7 Upgrade Advisor says that my machine calls brilliantly... all green. Also, because many new software products are released for MSDN on DVD, it is necessary for me to be able to use this DVD ROM.

  I installed the DVD drive is recognized by WinXP Pro with all the latest service packs. Shows up as drive E in Explorer, it appears as a CD ROM In Device Manager it is listed as E - IDE DVD - ROM DVD-8212. However this player will not read a DVD!  I tested the DVD media in another more recent machine and it reads very well in a same DVD ROM.

  Is there something wrong with the xw8000 it cannot read from a DVD ROM drive?

  Thanks for any help.

  Weird that you receive notifications by email of responses. Usually, this is the default setting. When you type a response, it is usaully a box that is checked to receive notifications by e-mail. (Top right)

  I agree, the DVD player seems to be defective. It should work with only Windows drivers. The only additional files that you need would be to play movie discs, etc.

  Are your jumpers on both drives positioned same_If the cd drive is jumper as master, the other slave as you. If the other player is cavalier CS (cable select) the dvd player must be linked, CS. I think most of the HP machines are CS. Try that to see if it solves. If this isn't the case, maybe time to try another drive.

• Media Player will not read DVDs

  I have a series of educational dvd that worked very well, that now, they will not be able to open. You run the fix it program, says files are not readable. Help!

  With vista premium

  I just put a DVD in an old sony dvd player and it plays, so I can continue to use that, but it freaks wanting me that microsoft can play, then mysteriously can not play, I could charge them for the time they lose mine.

  ==============================================
  Wow... I didn't know you had 27 DVD and all of them fail to play.

  I wonder if this article would be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  And it could be a problem with the automatic playback:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• will not read DVD

  Why used my Queen rock Montreal or meatloaf bat outa * DVD plays on my computer it tells me that the two are not in this region of the world, but I bought them from walmart in ohio and they play fine on my tv and my car

  Hi Mickey s,.

  You want to play the dvd on the computer. I'll help you with the problem.

  1. what application you're using to play the dvd?

  2. have you made changes on the computer recently?

  Try these steps and check the result.

  Method 1: Change DVD region
  a. Click Start, type devmgmt.msc and press on enter to open Device Manager.
  b. double-click on CD-ROM/DVD-ROM drives, click on the DVD drive that you want, and then click Properties.
  c. on the DVD region tab, make the desired changes.

  Note: To configure your DVD drive to play discs from other regions, select a geographic area from the list of regions. As a general rule, you must select the region in which you reside. It is not often necessary to change the setting again.

  Important: The region can change only a limited number of times. When changes remaining equals 1, and you select a new region, an alert is displayed to warn you that after this, you only will be able to play DVDs from that region. Be aware that you will not be able to change the region setting for some DVD hardware and software decoders.

  Method 2: If the problem persists, run the Windows Media Player DVD Troubleshoot utility and check the result.
  Open the Windows Media Player DVD Troubleshoot utility

  For more information.

  I-                   Change the region to a DVD player

  II-                http://TechNet.Microsoft.com/en-us/library/cc771900.aspx#bkmk_5  

  III-             Change the country or region setting  

  I hope this helps.

• Satellite 1900-102: drive will not read discs of backup data after formatting C:

  Help needed desperately, please.
  Formatted my hard drive yesterday as too much evil and adware on computer, it slows down.
  Spending the day together download all udpdates Windows etc.
  CD drive reads audio discs, dvd, program the files on backup disks, utility records...
  ... BUT the habit of reading the data backup discs before formatting, for example, I did. Word documents, power point documents, photos. I get an error message saying: D:\ is not accessible

  any ideas?

  Kevin

  Hello

  I put t know why only this drive doesn t work on you laptop, but if the drive works on another computer then try to create a new backup of data CD and then try to copy the files from the new CD to your Satellite 1900

• Satellite M30: the drive will not read or burn a dvd - rw - Xp SP2

  I have my carpet and M30 * one dvd not read or burn dvd - rw. Tried driver implemented to date, but without operating. Help, please!

  Hi Khalifa,

  Until you can play a DVD - RW on your M30 the DVD must be finalized. In order to record on a blank DVD - RW the drive must be formatted first (using something like Nero INCD). If all goes well, then you should be capable of both wathch and burn DVD - RW discs. :-)

  Kind regards

• UJDA750 will not read dvd - r

  Subject he says all new Tecra M4 and integrated carpet * a UJDA750 DVD/CDRW combo won't read DVD-R, in fact until I uninstalled the DLA & NTI software it's rather rude on the reading of a CD - RW!

  What is the point of a new DVD player that can not read the DVD-R commune!

  I want to emphasize that the media reads fine in 5 different readers other than that burned the dvd - r to the origin. I have tried 1 x, 4 x & 8 x media with the same disappointing results.

  Hello

  I don t know why it isn't possible, but have you checked all other CD for writing?
  If this problem occurs with any type of media, so it s best to contact a Toshiba Service partner and ask for verification of the disc.

  Read CD - RW discs, to a UDF reader software. Discs CD - RW are written in UDF 1.5 format. This UDF reader software can be downloaded from Adaptec "s web site: www.adaptec.com"

  This software can play CD - RW discs written with rewritable CD drives that are written in UDF format. Without UDF reader software, CD-ROM/DVD-ROM in s Toshiba laptops can only read ISO 9660 discs.

  Good bye

• Equium A60 will read the cd but will not read DVDs

  Hello

  I got my laptop for about a year and a half, and it suddenly stopped playing DVDs. It reads the cd. I does not even recognize the toshiba boot disk which is on dvd, someone with ideas format.

  Thank you

  Hello

  Looks like a dead drive.
  Possible is not calibrate correctly.
  In my view if these malfunctions seems the best way is to replace the drive.

• HP p6-2310 will not read dvd + r Virgin

  My p6-2310 hp does not recognize blank DVD + R disc.  He recognizes, however, the DVD + R (DL) discs. I'm under Win 8.1.

  Reference:

  http://support.HP.com/us-en/document/c03280768

• My D: drive will not read DVDs

  Hello

  I have a desktop with windows Vista and my D: drive is not reading my dvd.  Can you tell me what I should do to fix this problem?

  Run repair:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems I hope I could help

• Will not read DVD CD

  I recently received this laptop - a Pavilion dv7 1279.

  I put in a cd, but then decided to put another during first loading again so I pushed eject on the drive tray.  The first CD ejected but then when I tried the next cd and other times nothing reads.  It runs for 1 second with a Cd but only run for 10 seconds or so with a DVD, but it doesn't recognize neither.

  When I look at 'Computer', it does not show a disc in the drive, but it does not recognize that it is a cd or dvd.  "When you put a cd in, it keeps for a few seconds then ejects it saying I need to put in a cd.

  Can anyone help?  Please...

  Device Manager indicates that there are no problems...

  I know you can't see me smile but it's so big that my ears are wet.  Your suggested link help out me.  I uninstalled the CD/DVD drive, shut down the computer for a few seconds.  Put under tension, connected, then put Miles Davis in and low and here it is - IT WORKS!  You never doubted.

  Thanks for the help.

• Windows will not read the disc media

  For some reason, windows will not read dvd or cd or the floppy one and the flash drives or cards of the camera with a usb drive. What would cause this and how then I get back to work? All media works on the other pc.

  Always connect these devices to drive/USB card edge USB connection (for desktop Front panel USB ports); never use a connector of the control panel back or USB hubs.

  Read the page and manually or just download & run fixit MS; It just automatically all the steps

  http://support.Microsoft.com/kb/817900

  With regard to the FDD. I'll say change the player as FDD get very often defective & now a days it is difficult to get a new one. For the majority of them are now short lived to over-exploitation.

  Remember to answer.

  S.Chatterjee

• My E drive will not read the DVD-RW/DVD-ROM

  So here is the problem
  I have a vista Home premium 32-bit with sp1 computer laptop
  who will not read DVDs or games that are in DVD-ROM format (specifically, the game command andConquer 3: Tiberium Wars)
  but it will read the games more alumni who are PC - CD (such as Command and Conquer: Generals) well it will nt installs successfully

  I tried to clean my computer and reinstall using operaing system came with my laptop drive, but the drive E may not even read that
  the CD turns, stops, turns, makes a strong ' loading ', but stops then
  nothing happenes
  I restart my PC with the CD in there because he says I'm supposed to o, but nothing happens, my restartes just PC normally

  Help, please

  Hello, tyINtrouble

  The device is listed as a DVD player?

  You can check by clicking on start, click computer, and to check the label of the hard drive, he may mention DVD or DVD - RW etc.

  You can also check your connections are secure.

  If possible, you can try to test the drive in another machine, or another drive in your computer to see if it works properly.

  If your hard drive and DVD/CD player are on the same parallel cable connection, it can cause problems as well.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.