OEM car charger do not push

Has anyone else noticed that their motorcycle OEM car charger does not grow at the bottom of the xoom? Until mine grows in the judgments of the metal rod, but this leaves approximately 3/16 inch of the exposed post. It scares me that he break into the unit. My wall charger push until the plastic base touches the xoom. I get a bad one car? I'll post a picture when I get home.

Mine did the same thing... but if my ac wall charger, so I assumed it was in the design.  Maybe its your wall charger which is the exception, not the other way around.

Tags: Motorola Phones

Similar Questions

  • car charger

    1. car battery charger damage iPhone 6 is it?

    2. What is the best, fast and safe car charger?

    Cheap car charger can damage the battery. Get one that is certified Made for iPhone. Griffin and InCase the two make reliable car chargers. The Apple online store sells several others.

    On the thing to do as a precaution - do not start the car with the phone connected. Connect to the phone after starting the car, because the starter on some cars can generate a voltage surge which can cause problems. A good charger should filter out them, but it's still a good precaution. (BTW, hybrid and electric cars do not have this problem).

  • Requirements replissé or satellite 1800 with a car charger

    Hi I have a 1800-514 model, Toshiba Satellite PS183E-004TV-EN.

    He said the the power supply 15V/5. On the battery, there 10.8V / 4500maH.

    OK I just bought a universal 70W DC Power
    Adapter. http://catalog.Belkin.com/IWCatProductPage.process?Merchant_Id=&Section_Id=2 01473 & pcount = & Product_Id = 168798

    The part No. door model: #MPB001xA. Entry
    11-16Vcc/7A, power: 24VDC 3 / 3. 5 a output power up to 70W max.

    Using the Belkin advanced Configurator, it gets this http://www3.belkin.com/config/intelliTip/intelliTip_results.asp?sid=500925928&recId=30

    Is someone can you please tell me if this Belkin car charger is allowed to use for my laptop, about power requirements?

    I hope someone can help
    Thank you
    Andy

    With output power in 24V - 3 to 3.5 amps, I don't think. If you the intensity a bit late is not a big problem, but if you are not getting enough components amps will surely suffer. But during the amplification them isn't really useful either. Can see if you could find a car adapter that has a power of 5 amps, with a range that remains inside the volts as well. Would work very well then.

  • battery + car charger

    Does anyone know where to get battery back atrix (not the droid x batteries) what car charger (not to mention that the car dock) is also compatible for use with the atrix

  • Y at - it a phone for the Apple iPhone car charger 5, 5 s recommended by Apple? If you have any suggestions?

    I would like to have a phone charger from very practical car for those times your on the road and you need a charge. Y at - it a charger that apple recommends to the 5 of Apple and 5s iPhones? I said you can't wait randomly to use any charger desired due to the requirements of specific software. Someone at - it a recommendation?

    I use a belkin that I bought at a local office supply store. Apple sells a similar on their Web site. http://www.apple.com/shop/product/HJ3J2ZM/A/belkin-car-charger-24a-12w-with-buil-de-foudre-c t able? fnode = 97

    It does not include the cable. http://www.Apple.com/shop/product/HJ3H2ZM/A/Belkin-car-charger-24A-12W?FNODE=97

    -AJ

  • Car charger for the Stream 7 HP

    I tried several car chargers with my Jet 7 HP and none seem not to work. They don't seem to even be recognized by the HP 7 stream.  Does anyone know of a car charger that works? This is for American cars, to the United States.

    Make sure your car charger is off 2amps.

    Many of them offer only 1 amp, and some of them don't 500ma.

  • SanDisk + 8 GB car charger?

    I just ordered a new Sansa Clip 8 GB + of Wal-Mart and I want to order a car charger. I noticed on ebay there are a lot of packages/car charger for the clip + but when I ask the supplier if they adapt to the 8 GB, he said that the charger that works with the 2 GB and 4 GB will not work with the 8 GB. Nobody here does not know if the 8bg requires a charger that is different than the smaller 2 GB & 4 GB Sansa Clip + models? Also made the Clip + comes from my computer with a plugin type cable mini-usb standard which charges? Thank you

    Nonsense that the seller - it's the same for all models Clip and sizes.  What works for one will work for one of them - connections and power draw are the same.

    And Yes regarding the USB - your new Clip will come with a nice, short a (Super) to carry around.  Of course, you can also use the one that you already have, like a digital camera USB cable.

  • Nine computer Compaq 610 laptop charger does not work. Help, please!

    I went through 3 Chargers and charger port repair.  I am so confused about why not charging my phone.

    My first broken charger comes out of usury, but he had to stand on a corner charge.  I really want to continue to use it so I help him on an angle so he could load.  It ruined the port and the charger completely.

    The second charger, I bought was from Hong Kong on eBay, I know your probably thinking that wasn't a smart move, but he had the right replacement part number it is said on the first charger.  This charger was incredibly hot but he quieted worked for awhile.  Finally one day rubber melted and was all dealt with.  It melted if bad it was bad to get the magazine back in the port, but I got it.  Then after that use more rubber would melt it got warm every time and once the charger would not come out.  I pulled it out with a lot of force and then the final piece got a little separated from taking part.  Then the charger now must be held in hard and a slight tilt to make it work.

    I bought a new one with the right part number and it seems to be smaller than the three other broken.  I just plugged it in for the first time a few minutes ago and it started to load perfectly for about 20 seconds.  I was so releived, until I checked a second time and he stopped to load!  I don't know why, but it is not only in charge at all!  I plugged again many, he waved a little and tried to take the battery out and then try to turn on my laptop.  But no matter what I do it still will not charge.  Is the most funny thing is that the old one can still.

    I called HP to help and the talker suggested using "active chat" online with them.  He can't have my phone so I can't speak for them.  I tried FAQ and reading the forums of other people, but nothing helped.

    Can someone tell me why on earth that keep breaking all shippers of m.  Even though I bought a new and my laptop reparied it still broken.  I treated the new one with a lot of care.  Can someone also tell me why there is a new not work and why is the old man?  The problem with my computer laptop port battery etc or is it just the charger?  If I did not explain something correctly, or you need more information and where I bought things and my laptop and charger specifications and details please ask and I will tell you in detail.  This forum post is one of my last hopes.  Please if you cannot resolve the problem yourself at least guide me to who or where I could get help from.

    If you have read all this I thank very you much for your help and please if you have any information to tell me.  Thank you regarding any future assignment.

    I have no idea why, but I changed the portion of the charger that goes into the wall with the former and it started to load!

    Thank you for answering anyway, but it was not the port.  Yes, he finally goes to work now! YAHOO

  • M880 MFP: A5 size print double-sided on MFP M880 taken in charge or not?

    Is automatic duplex printing, taken in charge or not on the MFP M880 on A5 format? Manual and specifications do mention not all either taken in charge, but on the printer, it doesn't seem to work.

    Can someone tell us for sure?

    Thank you.

    You're wondering why I put things in different positions have in mind that I do this the car using a phone.

    I hope that you can open the table that I am having some problems with web pages is sometimes not not for me this morning.

    And the result is that a5 is not supported for duplex printing in this machine.

  • BlackBerry car charger could Z10 makes Z10 dead?

    Hi Forums

    I used the car (not original unfortunately) charger for my Z10 for about 30 minutes. A couple hours later my phone always needs to recharge and I borrowed from my Bank of power friends for her (she used to charger the Z10 also). 30 minutes later, I want to see incoming message, but my phone is dead dead baby lol.

    I tried to wake him up the Web, magazine, link BB and a few reboot with no luck. Components have become very hot when it is connected to the charger PC and the wall. So I bring him to the hospital allowed for a special treat, covered by the warranty.

    A question could car charger is the cause or the Food Bank? If I use charger car in the future, it could happen again? A friend told me that the car charger may damaage the phone due to unstable power.

    Thanks in advance for reading and explanations.

    I wouldn't be afraid to load it into a car... any charger, make sure just that output is also 750 mAh or more.

  • Smartphones blackBerry car charger

    Is there seriously not a car charger for the Playbook? The quick charger uses a 12V interface, so you would think it would be a very basic accessory for RIM to make available.  Seriously, guys?

    It is certainly low power. There is a top label saying that output specifications are 5.1V and 2100mA, but there is no way, it's really able to output as long as that, unless my car hybrid restricted sort the output on the 12V Jack.

    I used to get some data battery Guru, and when the load of 30% remaining, he managed just above 1. 1a.

    In comparison, the quick charger to manage 2. 4A and the supplied wall charger can do 1.9 has at this time. (None of them are current limited by the charge controller down to 30 %.))

    This means that it is about 3 x faster to load a PC's USB port, however. It should be somewhere around 4-5 hours to charge, according to my quick calculations.

  • Smartphones blackBerry BB Torch 9860 car charger?

    Dear Sir

    • I have a HTC mobile car charger, I wonder if the connection to the cigarette lighter car microUSB Chargers have served me for my Torch 9860.
    • And who is Max output voltage/amperage?

      Thank you

      concerning

    the device / phone current limit to about 1.2 amps when using a fast charger.

    most Chargers USB microphone will work, but some put impulses that are not compatible

    I used LG, motorola, jabra, generic Chargers with number, some more quickly than others charge according to the amount of amps provided.

  • Car charger for Droid - my profile

    I know that the original charger has a 850 spec mA, but most car chargers do not (as well as most wall Chargers).  Search, I see two contradictory principles.  One is that a slower presentation for lithium batteries is actually better for the life of the battery.  Yet others say that if the charger does not know that the unit will try to attract, the charger can overheat and may fail.  The manual of Motorola said only that for battery charging you must use Motorola Chargers, but shippers listed on the for the Droid Motorola Web site do not meet the 850 my and are of course chargers for another model.  Motorola someone all advice on that?

    I gave you a clear answer.   It is that the full current nominal is 850ma.  The two instructions that you seem to find contradictory are not.   The droid needs 850ma to recharge his rhythm quickest.  It will load more slowly with lower currents or perhaps not at all.  The droids (and other smartphones) need more or less depending on what they do and 850ma provides enough to load and do something else.

    It is what is the charger supplied to you and what the relative rating that it was.  I think that if you buy a Motorola charger they support for the Droid, he will say that.  The warranty says only to use Motorola Chargers.  (although I personally don't always follow it) and, as Motorola brings many cell phones (some with the same connector)... Make sure that the charger you get specifically States it is intended to be used with the droid.

    I also told him that you could use a charger with less than 850 ma, but it will not load as fast.  If you go down, it will be not at all.

    Yes, Motorola made 850ma rated Chargers.  Is one supplied with your phone. You can read the right side on it.  It's the 'exit' not heat output.  Chargers for smart phones of all types are usually 850ma.   I suspect that what is meant by 'Fast rate' is that they put out the 850ma that is needed.  The Chargers that work as low as 500ma can work in some cases, but I don't recommend them.

    Just in case you need a final bit of clarity... 850ma puts the charger supplied with the droid by Motorola.    I don't know of a smartphone seller with less than 850ma charger which comes with their phones either.

  • Touchstone installed / car charging?

    I told the rep of Sprint Saturday that I was interested in the stone key and also necessary to charge the phone in my car (anticipating the low battery life)

    Sprint sold me a Touchstone (Matt back installed at the store) and a mirco Sprint car charger

    The pre w/Touchstone has no place to plug the micro usb car charger

    The touchstone does not accept the card of micro Sprint usb car charger

    How and when this will be fixed?

    The Meadow should be loaded into the car. The battery life is low.

    I'm not quite...

    1. the touchstone has a spot in the back for a charger, microUSB cable, ONLY the official Palm cables will be adapted as far as I know (the moulding around others is a little too big to fit).

    2 MicroUSB cables can be plugged directly into the phone on the right side of the screen (small flap out and switch to the lower, easier if you drag the keyboard first).

  • I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

    I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

    Have you tried:

    Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

Maybe you are looking for

  • I can't post comments in the beta version of firefox 4

    Okay, so, like many others already have here, whenever I try to send feeback to firefox by saying: he is happy or sad in the new beta of firefox 4, it says I need to download it. I tried to open it on: config and everything that makes user reset all

  • Problem with the last update

    I downloaded 9.2.1 update, now my screen is frozen, with the iTunes logo and the charging cable. Phone will not shut dow or turn on

  • BlackBerry Smartphones bbm is slow

    Since I've updated my bbm it was so slow and I can't control this proply because when I move the curse thing it go cus its so slow, is there a solution and is what is happening at all?

  • Tunnneling and ISATAP adapter Teredo does not (ERROR 10)

    I use a desktop computer HP-Pavilion, BN399AV-ABA p635z with Melody Win 7 Home Premium (x 64) Service Pack 1 (build 7601) my PC to the top of the program States that will not start my tunneling adapter. My driver update program indicates that the dri

  • Why a song I downloaded get classified as 'other media' instead of music, and how it moves it?

    New to music downloading but I am confused as to why one of the 12 songs I downloaded is not recognized as music from Windows Media Player or 'Music' on the stage of Dell. WMP it categorizes as "other media". Dell Stage just does not display it at al