Of all-in - One HP ENVY 23-o014: Replacine the processor...

Similar Questions

• All-in-one HP Envy 120: HP ePrint E-mail

  I hope someone can help me with my problem.

  I created an account of HP ePrint for my all-in-one HP Envy 120 printer and then changed the address of e-mail to something which I could easily remember.  So far so good.  However, as this printer could not copy or scan, I replaced it with another printer with the same details of the model.

  Then, I went on my HP ePrint account and deleted my original details of ist printer (as he has been appearing as offline and not connected) and added my new printer via the tab to add devices.

  The problem is, I want now to change this e-mail to my original email (easy to remember) address address but when I click on the option change Email, it is grayed out and cannot be changed.

  Can someone help me with what I want not a random email address

  Concerning

  Hello

  A specific ePrint address cannot be assigned to different devices... Your previous address can not be used on your new printer.

  You will need to select an email address unique for your new printer - sorry.

• HP Envy 4500: Compatibility of series e-all-in-one HP Envy 4500

  Currently I have Pavilion TouchSmart 11 Notebook with 64-bit Windows 8.1 and series e-all-in-One HP Envy 4500.  I'll upgrade to 10 Windows and amazing that my printer still works with Windows 10 or I have to install a new driver in order for my printer working on the new operating system (Windows, 10).

  Thank you

  Hello

  More likely, you will need to reinstall the drivers of HP after the operating system upgrade.

  You can try using the software and verify that it feature, if you experience problems, uninstall the HP software and reinstall the latest version of the software for windows 10 of HP.com.

  Kind regards

  Shlomi

• HP ENVY 4520 all-in-one: HP ENVY all-in-one 4520 can't turn off

  I can't turn off my printer, it enters mode "Eve" only.  I press the power button, it comes to life, tap again and ensure that as soon as the switch mode.  Any help would be appreciated.

  Hi @Freckles60,

  Welcome to the Forums of HP Support! I see that you have problems with putting off the printer. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Do a hard reset of the printer.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer, to see if that can help, printer All - in - One HP ENVY 4520

  Select your operating system.

  How is the printer connected?

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Office all-in - One HP Envy 23-c010 there a tv tuner?

  Office all-in - One HP Envy 23-c010 there a tv tuner? How can I find and use it? If this is not the case, what should I get?

  Thank you

  Hello

  Machine has only a small room for something like:

  http://www.Amazon.com/AVerMedia-A301-mini-hybrid-tuner/DP/B00B1SBOTQ

  You can use for free to air channels and as it is small you need a very GOOD ANTENNA to connect to your machine. It will not connect/replacement of cable TELEVISION networks

  Kind regards.

• print allignment page all-in-one HP PSC 2400 turns off the printer features

  After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

  After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

  Hello

  You can get a faster solution on the Support Forums of HP printer.

  Here is a link for your convenience.

  Printers and all-in-one - HP Support Forum's:
  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  Select the appropriate forum for your device.

  Concerning

• SMART PHOTO ALL-IN-ONE C-4385: can not find the download of the printer software.

  I need to uninstall and reinstall the complete software for a Photo Smart C-4385 all-in-One. I searched everywhere on the HP site and Googled it and still can not find it. Can someone help me with this? My OS is Windows Vista Home Premium 32-bit. Thank you.

  Hello

  Here's a direct link for the full software features for your printer:

  http://ftp.HP.com/pub/softlib/software10/COL20274/MP-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe

  Kind regards

  Shlomi

• j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

  j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• All-in-one HP Envy 4500: printing a Web page

  The procedure to print a web page has changed all of a sudden.

  Until today, it's simple. I clicked on the print icon in the bookmarks bar. This launches the print dialog box. I then clicked on 'Préférences' to select the print quality and finally on 'print '.

  Today, I wanted to print confrmation of a command line. When I click on anything that is in the print dialog box, another window open.

  I managed to select my printer, but when I clicked 'Print' nothing happened. In addition, I could not any setting beyond the number of copies and if you want to print on one or both faces. What is going on?

  Hi @hbf1842,

  What is the new name of the printer now listed as default printer in devices and printers? (Like 4500 or class envy 4500)

  If the class driver is installed, it would be a preinstalled Windows driver and it should not the automatic option to duplex. You will need to remove and add the urge to 4500.

  If you still experience problems, uninstall and reinstall the printer software again.

  • Uninstalling the software of the printer (Windows).
  • HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  The HPePrint driver is automatically installed with Windows 8. Just make sure that it is not selected as the default printer in the future.

  Thank you!

• HP ENVY 5530 All in One: what "Scan by means of the computer?"

  I use Windows 10, 64-bit and I have a wireless hp envy 5530 all in one printer on my network.

  I do not understand what "Scan to Computer" means... does that mean I can scan a web page and send it to my computer, it means scan a document and send it to my computer or that mean both?

  Thank you

  Dino

  Hello

  Thank you for using the HP Forums.

  Scan of the computer means "scan a document and send it to my computer.

  You will need to install the FULL features software and activate it before you can use.

  How to scan to computer

  Once you have installed the software:

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)

  Scan to computer

  Hope that helps!

• Want to 4500 All in One Printer: Envy 4500 and Photo paper

  Recently, I tried to use my 4500 want to print photographs, using HP Premium Plus Photo paper. Each attempted printing resulted in the printer telling me that there is a paper jam. I would open it upwards, remove the paper (which has never been really stuck - just looks like he started getting into the printer and stopped) and try again... Paper jam. I don't have the paper in the tray - went out my plain paper. I am able to print correctly on plain paper, but it won't take photo paper. Any ideas on how to solve this problem?

  Hi @kpdevlin,

  Welcome to the Forums of HP Support!

  I see you are trying to print a picture on your craving 4500 All in One Printer and it keeps blocking. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like there could be a problem with the rolls of paper, print settings, or the paper tray.

  Please work your way through this guide to see if you can solve the problem, a 'Paper jam' error on HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 3540 Printer series.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You have a photo that you can try to make a copy of, as a test? It would be to help eliminate the printing as the cause.

  Please make sure that the paper type/quality settings are correct, for more information, please see this guide. HP ENVY 4500, printer Deskjet 3540 - change the Mac OS X print settings.

  In addition, if you have access to a Windows computer running Windows 8.1 or earlier, it is an update of the firmware available for your printer. HP Envy 4500 series firmware upgrade to improve the performance of the printer.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP ENVY 4500 E - ALL - IN - ONE: HP ENVY 4500 E - ALL - IN - ONE DOES NOT PRINT

  I can't print from my desktop PC with an ethernet connection, but I am able to print from my laptop with a Wi - Fi connection.

  The printer used to work on my desktop PC, then I upgraded to Windows 10, made the operating system was not entirely compatible with my PC, reformatted it with the help of remote support Microsoft, back to Windows 7, had a lot of problems with Windows Update and WIndows Installer and so also with the installation of the driver.

  I tried installing from the original installation CD HP Envy with no luck, uninstalled and reinstalled with the latest driver from the HP website with no luck and since (apparently) to solve the problem with Windows Update and WIndows Installer, uninstalled and reinstalled the driver software on the CD again with no luck.

  I tried all the suggestions on the forums, with my computer hang too for the first time in weeks at the recommendation of msconfig on your forum for disabling startup programs.

  The scanner works.

  Sometimes, in Word, I get a message error "Windows cannot print due to a problem with the current printer setup". Sometimes I have no message.

  (I use Service Pack 1)

  Hi HPAGJ,

  Thank you for coming back to us.

  Gemini02 is currently out of the office so I thought jump in and help.

  When you run the PSDR, have you selected the connection "network (192.168.2.107) is not installed? Being not fully installed is causing the problem.

  There is corruption on the computer, this can certainly occur after you upgrade your operating system. I suggest to try the following steps in the following order for best results.

  • Make sure that all of your Windows updates are up-to-date.
  • HP printers - uninstalling the software of the printer (Windows)
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Manually delete the print driver:

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
  If the problem is not resolved, I suggest that you clear the money printing system.

  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
  c:\windows\system32\spool\drivers\w32X86
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
  If there are any keys other than those listed above, follow these steps:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
  If there are any keys other than those listed above, follow these steps to remove them:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  • Download HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  If you are still having problems try:

  • HP print driver printer - install and use the built-in Windows

  If all else fails, I create a new administrator account and try to reinstall:

  • The difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Printer all-in-one HP Envy 100

  I want to scan slides on this printer.  Can I do it?

  ENVY 100 all-in-one printer does not support the scanning of slides.

  There are several manufacturers that offer scans of slides or negatives. Here are the couple of scanners HP that support the digitization of slides:

  ScanJet G4050:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L1957A?HP-ScanJet-G4050-photo-scanner

  ScanJet G3110:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L2698A?HP-ScanJet-G3110-photo-scanner

• HP Envy 4500 e-all-in-one: HP Envy 4500 print size

  Since I installed this HP Envy 4500 e-all-in-one printer, it prints in small text. I went to tools, options and preferences and can't seem to find a way to change the print size. Any suggestions? Thanx

  Hi @husky52358,

  Thank you for visiting the Forums from the HP Support! I see when you print to your HP Envy 4500 text is very short, you tried to go into the preferences and options without success.

  You try to print a document or an element of a web page? What program or browser you use?

  If you are using a Windows operating system, please try the following:

  1. open an Internet Explorer browser, go to the far right click on the gear icon

  2. Select Print Preview

  3. now along the top, you will see an option to change the size of the page, please make sure that it is set to adjust or 100%.

  4. now, try a test page, the text is expanded?

  Now go ahead and run the HP Print and Scan Doctor:

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know the results.

• HP Envy Touchsmart all-in-one: HP Envy 23 computer stopped working

  Our Envy of HP TouchSmart All - in - one PC off while in use, as if the power went off.  We have unplugged and let it sit for 12 hours and plugged in.  The power cord green light is on and the white light where to plug in the adapter at the rear of the central unit is on, but it won't.

  Is there a trick to get back on?

  Model # 23 - d034

  Serial number is [removed personal information]

  Product # H3Y87AA #ABA

  My son disassembled the computer. The motherboard was fried.