% Of PM-4-ERR_DISABLE: Loopback detected on Gi0/2 error

Similar Questions

• "DirectX 8.1 do not detected on your system" error when installing a former music software

  Original title: "DirectX 8.1 do not detected on your system.

  I am trying to install a FORMER music software to use VST plugins on a new Dell XPS 8300 with Windows 7.  The "DirectX 8.1 do not detected on your system" error each time.  After a thorough research on the internet, a solution of choice has been to change the registry in DirectX parameter to 4.08.01.0810 to "fool" the installation program, but that did not work on the XPS (he is actually worked on a Win 7 Dell laptop that I tried).  Any advice?  Thanks in advance.

  I know this is an old topic, but I thought that if a search engine led * ME * this is probably do to others too.

  The right solution is to go to the CAKEWALK site and download the tool, they have created to let people to come out of this problem.

  Go here:

  Installation of DirectX problems (CAKEWALK.COM)

  Or bypass instructions page and download it directly:

  DirectXUtility.zip

  Once you unzip the file, run it with the installation disc in your drive.

• CD/DVD drive is not detected (Windows Vista). Error message: Please insert a disk (removable disk): __Our device driver is: TSSTcorp CD/DVGW TS-H653L ATA Device.

  Was not aware there is a problem until I tried some recently audio and data CDs.  Have you tried different Web sites to help you, however some of the directions come with a warning that by following certain procedures I can create other problems.  The FixIt tool was not able to install the player.

  Hello

  Please ALL these even if you've done it before as it's often the total process that
  solves the problem. You should also check with the system manufacturer as some readers do not use windows
  by default the drivers and need their own, use the bottom and if no joy check on the site of the manufacturer of the system.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• How do I detect and fix registry errors?

  How can I find out, detect errors and repair the registry?

  Hello

  You can solve the problems caused by an error by using different methods. Most of the errors are not just the registry
  errors. Do not buy into the use of cleaners registry or system optimizers who are too hype and wil difficulty little
  causing a lot of problems. Look at programs such as snake oil.

  If you have a system error come here and in detail the issue and we can usually help you solve. Specific
  Errors may require a particular corrective measure. Here are a lot of General methods to help you determine
  or correct problems. In the next message will be a complete enough for general performance troubelshooter
  help if needed (of course, it includes many below).

  ------------------------------------------------------------------------------------

  Some general methods to correct a lot of problems in the system include:

  System restore - use so you can go back to before a problem occurred - with the exception of malicious software which most often
  It must be removed before using the system restore, which could help to spread the infection.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------

  To correct the many problems caused by the start-up of programmes, services and drivers.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx-

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  --------------

  A repair Installation allows to keep the programs and data, even if redundant backups are
  always a good idea.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------

  Other useful methods include the Startup Repair (the best of the repair disk or a Windows Setup.

  Startup Repair often works from a Windows 7 repair disc or a disc of Windows 7 Installation
  When he does not value or a recovery disc. If so how do a Windows 7
  ERD is lower. An ERD can be done on any computer with a CD burner running
  XP, Vista or Windows 7 because it uses no files from the host computer.

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk is not - use OPTION 2 to
  make the disc.
  
  How to create a Windows 7 system repair disc - use OPTION 2 to
  make the disc.
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite A200-1AI - Windows has detected the hard drive error

  Hi guys.

  I think its time I replaced my hard drive. Ive done all the checks and his return there is no errors with the hard disk, yet whenever I connect I get a message saying that there is.

  I guess that's only a matter of time before things get more serious.
  Its just now that it unattached restarts automatically.
  Ive gave my laptop below specifications and the specifications of the hard disk drive.
  I do not know which drive hard im supposed to be looking at.

  I don't want to buy one and then duty send because its incompatiable.
  Ive done some reading on the internet and he says I cn buy any production, but I need to know wheather its an IDE or SATA, what are these and what do mean? How can I find out what my current car?

  Also should I look for a hard drive with the same speed? It doesn't matter if its fatser?
  Wise, capacity is also ok for larger, will my laptop be able to handle it. Thanks for help

  MODEL NAME: Toshiba Satellite A200-1AI
  MODEL NO.: PSAECE-00U00JEN

  HDD SPEC:

  TOSHIBA MK2035GSS HARD DRIVE
  CAPACITY: 200 GB
  CERTIFICATION: S.M.A.R.T
  DrRIVE ROTATION: 4200 RPM

  Hello

  The Satellite A200 supports the SATA HDD controller.
  That's why you need to buy a SATA 2.5 HARD.
  The value of the rmp is not really important for compatibility issues with the 4200 RPM HDD or more is possible and compatible.

  SATA controller not limited to any size of HARD drive, you can also use large drives.

• network location detection. Failed with error 0x8007007E: the specified module could not be found

  Using the internet connection at home:

  Identification of network adapter

  Error failed with error 0x8007007E: the specified module could not be found

  Hi JimQv,

  Check to see if the following is useful.

  Method 1: Run that this automated convenience store and look for the question.

  Improve performance and security in Internet Explorer

  Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• Cannot install applications through Microsoft store in Windows 8 Pro: using the internet through the proxy: detected 'No. Internet Connection' Error statement

  I study in a University, and we have access to the internet through the proxy. We just need to put in the proxy port: in the settings of internet explore and authentication additional etc. is not necessary to access the internet. Everything else is working well, including windows update and even browse apps in the store of Ms. But I'm unable to install any application. Help, please.

  In fact here in ITI, all our internet traffic is routed through a proxy (to stop the torrent, filter things etc.). To remove the proxy is not an option.

  I solved the problem by using the following commands as an administrator:
  netsh
  WinHTTP
  import proxy IE

• Re: Installation Canon IXUS V - connection of the camera not detected

  I installed the driver from the website of Canon, but when I connect the camera, I get a message saying "connection Camera not detected' followed by an error message saying pscN109 has stopped working.

  Then a message from Microsoft saying no soloution found. Can someone help me?

  Hey Buddy

  May I ask why you post this message here on the forum of Toshiba?

  I think you should contact the manufacturer of the device for support

• Error 12029 in IE 8.

  Installed IE8 and unable to connect to the updates.  A ran IE connectivity diagnosis report twice that reported:

  Diagnosis of last run time: 06/10/09 02:22:42 WinSock Diagnostic

  WinSock status Info All base service provider entries are present in the Winsock Catalog. Info Winsock Service providers strings are valid. error Entry provider MSAFD Tcpip [TCP/IP] could not perform looping simple communication. Error 10013. Info Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test. Info Entry provider RSVP UDP Service Provider managed the loopback communication test. error Entry provider RSVP TCP service provider could not perform the looping simple communication. Error 10013. error There is a problem of connectivity with an installed LSPS. action Auto repair: WinSock Reset catalog action Executed successfully: netsh winsock reset catalog Info System restart required

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter Info Network connection: name = Local, Device network connection = Intel(r) PRO/100 VM Network Connection, MediaType = LAN, type = LAN Info Network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394 Info Ethernet connection selected State of the network adapter Info The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn	FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  warn	HTTP: Error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn	HTTPS: Error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn	FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  warn	HTTP: Error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  warn	HTTPS: Error 12029 connecting to www.passport.net: a connection with the server could not be established
  error	Could not make an HTTP connection.
  error	Could not make an HTTPS connection.
  error	Could not make an FTP connection.

  Easily, I solved this problem by restaring IE:

  1. open IE/tools/options/advanced /.

  2 - Press the Reset button

• How can I fix my internet connectivity problems: entry msafd tcpip tcp provider ip could not perform looping simple communication

  WinSock diagnostic

  WinSock status
  info all base service provider entries are present in the Winsock Catalog.
  channels of information the Winsock Service provider are valid.
  error entry MSAFD Tcpip [TCP/IP] provider could not perform the looping simple communication. Error 10055.
  Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
  Info entry RSVP UDP Service Provider provider passed the loopback communication test.
  error entry RSVP TCP service provider provider could not perform the looping simple communication. Error 10055.
  connectivity error problem exists with an installed LSPS.
  repair automatic action: WinSock Reset catalog
  action completed successfully: netsh winsock reset catalog
  the information system required reboot
   
  Diagnosis of network adapter
  Network location detection
  Info to help home Internet connection
  Identification of network adapter
  Info network connection: name = Local, Device network connection = Intel(r) 82566DM Gigabit Network Connection, MediaType = LAN, type = LAN
  Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394
  Info network connection: name = Sprint PCS Vision, peripheral = Palm Treo Modem, MediaType = PHONE, type = NONE
  Info Ethernet connection selected
  State of the network adapter
  Info network connection status: connected
   
  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity
  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12017 connecting to www.microsoft.com: the operation has been cancelled
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
  [/codebox]

  Hello

  You did changes to the computer before this problem?

  Try the steps and check them out below:

  a. open internet explorer.
  b. click on tools > Internet Options.
  c. click on the Connections tab.
  d. click the LAN Settings button.
  e. uncheck all options on the shortcut menu.
  f. click on the OK button.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-12029-in-ie-8/47a865dc-3237-4e07-84a9-d9fb20a766e3

• Portege Z810 and BIOS update 1.80

  What the BIOS for Portege Z830 update (PT224 / PT225 / PT22L), version 1.80 do?

  The description says fair + "This BIOS update adds functionality to your system." +, and I couldn't find anything about this website more Toshiba on. The update has been published on 24-05 - 2013.

  I assume that Z810 Portege European must be like us Z830/Z835 (PT224x/PT225x) so I ve checked the page American support for the update of the BIOS and here's the info on the BIOS updates:

  + Version 1.80 - 2013-04-25 +.
  + Optimized a BIOS setting to improve the reliability of hibernation RESUME. +

  + Version 1.70 - 2012-09-12 +.
  + Implemented the Intel specification for stability - put MEBX up-to-date at 7.0.0.0063. +.
  + V1.30 EC/KBC: ensures better stability. +
  + V1.30 EC/KBC: changed the method of detection of power supply error. +

  + Version 1.50 - 2012-02-13 +.
  + Add a boot LOGO sequence for ZAT (GPS) models. +
  + Improved: Control of the TPM on Intel TXT module enabled systems. +
  + Implemented a fix for a problem where the BIOS password can be entered when it is configured as follows: 1. wired USB keyboard is connected to the port replicator. Wireless USB mouse is connected to a USB port on the computer. 3. computer is docked in the duplicator. +
  + Implemented a fix for a problem where the BIOS password can be entered with some USB keyboards. +

  + Version 1.40 - 2011-11-15 +.
  + Improved: The TPM on Intel TXT control enabled systems. +

  + Version 1.30 - 2011-10-27 +.
  + Initial production BIOS for these models. +

  I hope this will help you.

• Qosmio X 300 - 13W displays a blue screen and 0 x 00000124 STOP error

  Hey guys and girls.

  I need urgent help with my new Toshiba Qosmio X 300 - 13W (British model) that I bought in December
  I chose to install the 64-bit Vista Home Premium on the computer and the slopes of big thing until I HAV a work of high intensity for it as a game or to have several applications running at the same time:
  The screen goes black and the sound begins to "jerk" (repeat in a very short loop for awhile) before crashing to a Windows blue screen
  The blue screen said he "detected a unsolvable material error" and the technical Ref of the error message is "STOP 0 x 00000124 (0 x 0000000000000000, 0xFFFFFA8008FE2030, 0x00000000B2000040, 0 x 00000000000800).
  Anyone else with the X 300 - 13w has this error or someone has an idea what to do.

  Thank you very much in advance.

  I think that goes to the GPU. It could be overheating.
  Download HWmonitor and run a game for 5 minutes with it running in the background and then go out and check what HWmonitor has recorded for the MAX GPU temperature.

  [http://www.cpuid.com/hwmonitor.php]

• Replacing the HARD drive in conditions of international interest?

  I bought my laptop in Australia on Feb 12 and took home with me to Indonesia in June. It worked perfectly for me and even if I didn't have to worry about anything for many years to come.

  Until there are 2 Sunday, when Windows popped up a message saying that it has detected a hard drive error.

  It is still under warranty, and it is covered by the international warranty.

  However while trying has sent in local service for hard drive replacement Center they told me that, although the new hard drive and the costs of the service is supported by them, the customer is likely to pay transport and customs costs, because they will have to claim the hard drive Toshiba Australia where I bought.

  I think it's a load of krap, that the seller is supposed to assume all the costs associated with the repair / replacement of defective components under warranty still. I understand that I bought in another country, but nevertheless my warranty is INTERNATIONAL.

  Now I would not * ing thereon if estimated costs quoted could ignore, but what they gave me was NEAR THE COST OF A NEW INTERNAL DRIVE HARD OF ABILITY EQUIVALENT that I can put on the market. In addition, it takes A FKING Waiting MONTHS for them to solve this problem on their own.

  I was directed here on the Australia from Toshiba support site. I hope this is the right place for this post and while I couldn't be arsed to find out what this forum is all about before posting, I hope that I can some tips / resolution regarding my situation.

  Hello

  First of all, I would like to make some clarifications on this question on this forum:
  > I was directed here on the Australia from Toshiba support site. I hope this is the right place for this post and while I couldn't be arsed to find out what this forum is all about before posting, I hope that I can some tips / resolution regarding my situation.

  It is a user community. Members of the community are trying to help other members share their knowledge, solve problems and discuss technology.

  Now regarding your HARD drive problem.
  I found this STATEMENT OF LIMITED WARRANTY on the Australian Toshiba support page:
  http://www.MyToshiba.com.au/file/Web/resource/PDF/warranty-statements/Notebook_AiO_Warranty_Statement.PDF

  + The International limited warranty offer +.
  + An offer expressly stipulated for the international limited warranty (ILW) may apply to your product (see product information on the Web from Toshiba site or product brochure). +
  + Supply of the defect of the international limited warranty coverage may differ from that provided by this warranty applies only when warranty service is required outside the Australia, New Zealand or PNG: +.
  Mail + free pick-up and return service does not apply to all services outside the Australia and the New Zealand. +
  Response, coverage and availability of services +-warranty times can vary from one country to another. +
  + - There may be extra charges and registration requirements in the country of service. +
  + A list of aspic International is available on the Web from Toshiba s website or by calling the Toshiba Support Center. +

  In your case I would recommend you call the phone number that appears in the warranty booklet and to clarify this point with service agents.

• HP Pavilion All - In - One MS214: cannot

  I put in a new hard drive and am now trying to install Win 7 OS.  When I boot to a cd, it runs but says that no operating system could be found.  I ran the HP Diagnostics and it says no bootable disk detected and gave an error code of BIOHD-3.  Can someone tell me what I need to do?  Thank you.

  [personal information]

  Hello

  From what you describe, it seems that the computer does NOT start from the Windows installation media.

  1 Please, ensure the installation media works and intact - no scratches on the surface, don't test it on another computer (if you can).

  2 If you cannot boot from another PC as well, then it is corrupt and you will need to create a new

  You can download Windows 7 ISO from Microsoft's web site > > https://www.microsoft.com/en-us/software-download/windows7

  Here are the instructions how to burn on a DVD > > http://www.howtogeek.com/80094/how-to-burn-an-iso-image-in-windows-7/

  3. If you can indeed start from the same disk from another computer, but not from it now, so please stop. Wait a few seconds and turn it on with the power button. Keep from hitting the Esc key (such as tap-tap-tap) and once that HP menu appears, choose F9 to start options start from the media.

  If the application, you must also first to disable Secure Boot and turn on legacy mode as described here > > http://support.hp.com/us-en/document/c03653226

  Let me know how it goes

• Blue screen STOP error 0 x 00000124 on Toshiba Qosmio X 300 - 13w

  Hey guys and girls.

  I need urgent help with my new Toshiba Qosmio X 300 - 13W (British model) that I bought in December
  I chose to install the 64-bit Vista Home Premium on the computer and the slopes of big thing until I HAV a work of high intensity for it as a game or to have several applications running at the same time:
  The screen goes black and the sound begins to "jerk" (repeat in a very short loop for awhile) before crashing to a Windows blue screen
  The blue screen said he "detected a unsolvable material error" and the technical Ref of the error message is "STOP 0 x 00000124 (0 x 0000000000000000, 0xFFFFFA8008FE2030, 0x00000000B2000040, 0 x 00000000000800).
  Anyone else with the X 300 - 13w has this error or someone has an idea what to do.

  Some common reasons for this problem is a hardware conflict between the graphics cards NVidia and realtek audio, but this seems to be a problem with 32 bit Vista.
  The microsoft Web site claims that it is a problem of PCI-E hotswappable with Vista but with a laptop that is not possible to phyically unless the hotswap happen somehow between the GeForce 9800 M GTS and the 9400M G during the games?

  Thank you very much in advance.

  Hello

  What's with http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=144313

  How many times you want to start new thread on the same topic?