Of Satellite A200 DVD burner does not work

The engraver of DVD of my Satellite A200-130 is not written at all. He reads everything and plays videos but it will not write anything even if the program, nero works and displays a message saying "burn successfully the process" in particular, but when you try to read the disc, Virgin sound.

Is anyone out there who has the same prob as me?

need help...

Try to use it with the Windows option. For data burning, you don't need additional software.
Can you use the format option and clear the contents of the CD/DVD-R/RW?

Tags: Toshiba

Similar Questions

  • Satellite A200 DVD-ROM does not work

    I received an error code 39 for my dvd device. The device driver and software are installed ok. I do not have the technical specification, so I don't know what code eror 39 is.

    Hello

    The error code 39 is very similar to error code 31.
    This code is known to me. I saw this question here in the forum from time to time.

    The solution is very easy! remove the upper and lower filter registry ;)!

    I found this Microsoft Knowledge base article that provides the details and the solution:

    Cannot access CD-ROM and Error Message "Code 31" in the device after Manager removed Adaptec Easy CD Creator on your computer
    http://support.Microsoft.com/kb/270008/en-us/

    Please follow the guidelines and the report if you did!

    Good bye

  • I installed plusv15 of real players and the dvd burner does not work. It freezes and told him to put in a disc.

    I bought plusv15 real player and it has been installed. for some reason any dvd burner does not work. A pop up comes up saying wrong disc record and replace it with a new drive. I did it three times. Real player support me staff referred to you. Windows dvd burner does not work.

    Hello

    I suggest you try to execute this fixit and see if it helps:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    I would also ask you to contact the manufacturer of your computer to check the updates of the firmware of your CD/DVD drive.

    It will be useful.

  • Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

    Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

    Hello

    Check with Toshiba support, online documentation and drivers (update or reinstall), and
    ask in their forums.

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    ========================================

    How to activate Audio devices hidden in Vista and Windows 7
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer (you want to be sure
    the mic input is enabled)
    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

    -----------------------------------------------------------------------------------------------------------------

    Pilots may also need to be updated:

    Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
    Audio (this is an example and you can have an other name/maker).

    Make sure you write down the description and model double click top - tab drivers - write version. Now
    Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
    CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

    If your driver shows 06 you have the default windows and part of the question.

    Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
    Put them - right click on Reboot - RUN AS ADMIN -.

    Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
    and then install the latest version. Restart and check after each test, not
    rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
    installed shows upward on the tab of the driver.

    Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check see the
    Disconnected devices and show disabled devices - check your micro - highlight
    then on lower right properties. Make sure that the appropriate injector is selected and check
    other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change
    .

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

  • HP pavilion dv6 notebook (my dvd burner does not work

    I have a hp pavilion dv6 laptop. my burner does not work. I went to the Device Manager I uninstalled, shut down the computer, restart the computer, the device mgr.enable the writer went I have little yellow guest. still, the writer does not.

    I perform a driver update, the response was: the driver is already installed is to this day. My dv6 is 28 months old.

    need some advice.

    under Device Manager.  CD-ROM/DVD-rom readers

    HP cddvdwsn-208bb

    "device usb HP dvd writer 940D thank you billy'g"

    Hello

    Try please run now from the following link:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Kind regards.

  • On Satellite L500D DVD player does not work - Code 39

    my dvd driver does not work it says driver may be corrupted or missing (code 39) I got it 3 days new

    read here:

    http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  • My CD/DVD burner does not work after installing Windows 7.

    Hello.

    I recently installed Windows 7 on my laptop (about 2 weeks ago), initially delivered with Windows Vista.

    The facility is perfectly, and I enjoyed the simplicity of the new operating system.

    Everything was going well for about 2 weeks.

    I was able to burn CDs and DVDs.

    But today, when my father asked me to burn a CD for him, Windows Media Player 12 says that I had to connect a burner and restart Windows Media Player 12.

    I restarted the program, which did not work.

    I restarted my computer, that didn't work.

    I uninstalled my CD/DVD burner drivers and reinstalled them back on and I thought that WMP12 had started working.

    But when I put the blank disc inside my laptop and started the burn, my computer gave me a message there was an error in burning the disc, and I had to close WMP12.

    When I got the farm, WMP12 and then tells me to connect a burner and restart the program.

    After that, I looked for the drivers online set to level, or to the bottom of the slope to.

    But none of them worked.

    After that, I talked with a HP technician who told me that it is better to stick to the pre-installed operating system that comes with a computer and not downgrade or upgrade manually.

    She also said that because my computer was made for Windows Vista, it was the compatible operating system for my internal hardware.

    It gives me no drivers or anything to install.

    I should have come to Microsoft first, because now I realize that HP has nothing to do with Windows 7.

    If Microsoft, I ask you:

    When you install Windows 7 on an original Windows Vista laptop and that your CD/DVD writer works for about a week, then it stops working...

    What should I do next to fix this? :(

    Please help ~!

    -Kyo

    Hey Kyo - San,

    Given that the troubleshooter could not see the CD DVD drive, you can try to navigate to the following location in the registry editor and deleted the upper filter and lower filter keys and check if it helps you get the job of CD DVD player.

    1. click on Startand then click all programs.

    2. in the start menu search box type regeditand press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    3. in the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    4. in the right pane, look for UpperFilters and UpperFilter key and select it.
    Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry.

    5. on the Edit menu, click delete.

    6. When you are prompted to confirm the deletion, click Yes.

    7. exit the registry editor.

    8 restart the computer.

    Note: Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.

    However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up and restore the registry, follow these steps in the KB Article: http://support.microsoft.com/kb/322756/

    Access the link below to learn more about the CD-ROM drive or the DVD drive that does not work as expected on a computer.

    http://support.Microsoft.com/kb/929461

    Note: the article above is for Windows Vista and the same applies to Windows 7.

    I hope this helps. Let us know the results.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite A200 - 28 P does not work, probably graphics card

    * Hello *.
    * Hello *.

    as the topic, laptop does not work, I think it's a graphics card defective (ATI Mobility™ Radeon® HD2600)
    I took out all the parts and I found a burned capacitor SMD 100nF/63V, I could be wrong
    below are pictures of the place where it is burned capacitor on the graphics card ATI Mobility™ Radeon® HD2600

    [http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183574_1280127579031_1705313723_515097_2492972_n.j pg]
    [http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/184823_1280764194946_1705313723_515905_3467147_n.j pg]
    [http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/183378_1280296983266_1705313723_515305_4843496_n.j pg]
    I would add that the laptop turns on but the screen is not started.

    I have a soldering iron and want to remedy, must only know what it is that

    I want it replaced with a new one, but I don't know if this a SMD 100nF/63V capacitor
    Maybe something else please help

    * I will be grateful for each answer *.
    * Thank U! *

    Huh it will not be easy to find the right answer.
    Maybe you should contact Toshiba service and ask for help. They have manuals for Maintenance and plan exact mainboard and they can help you with this.

    Buy a coffee and I m sure you will get the info you need. ;)

  • Satellite L650 - DVD player does not work and not visible in my computer

    Hello

    recently, I noticed that my dvd on my toshiba drive does not work.
    This isn't even apper in the 'My Computer' folder.
    And when I put a cd or dvd in the drive, it does nothing... Here is the screen of "My computer":

    http://img267.imageshack.us/img267/8458/31854306.jpg

    He had previously worked, but I don't use dvd for a long time player and when I tried yesterday it did not work...

    Hello

    You need to remove the upper and lower registry filters.
    But before doing so, please remove the CD/DVD drive in Device Manager.

    Then start the registry (regedit) and then remove the filters above and below this key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Then restart the laptop

    I think this should help you

    Good luck

  • Satellite A200 - DVD player does not open

    Hello

    I had no computer laptop withmy problems so far and my DVD/CD does not open. I'm not savvy in same computer so bear with me! There is no lights there at the moment and when I turn on the laptop it does not sound like he used to. I looked on other forums and tried things like access to the Device Manager, but it says that it is on it - any other suggestions would be welcome.

    Oh, and I get no error message and in Device Manager its says that "the device works correctly.

    See you soon

    Hello

    You can try to open the CD/DVD drive using something small and thin. Near the eject button, you should find a small hole.
    You have to slide - in the little thing and should manually open the CD/DVD drive.

    Then try to insert a CD or DVD disc and close the CD/DVD drive.
    Check if the drive can read data from the disc.

    I would recommend also check if the CD/DVD drive would eject the disc by pressing eject button check different opportunities.

    Welcome them

  • Satellite A200 (PSAE3) - USB does not work

    I use the Satellite A200 (PSAE3). I often set and turn off my mouse and then my USB port does not remember my mouse.
    But when I use the other mouse it works normally.

    Please help me my friends.

    Then the mouse must be strange somehow. What are you using it?
    To be honest, I can't imagine that you will have this problem with all modern external mouse and new USB.

  • -DVD burn does not work in the DVD player sometimes

    I have a Mac Pro from the beginning of 2008, and it came with a DVD drive (OPTIARC DVD RW AD - 7170A).  I was able to burn DVDs with using toast in the past.

    But lately, the half of the DVD burn won't play in my DVD consumer player.  I get a "Disk error" message when I try to play them, and they do not load.  It's a strange problem, because some of them work and some do not.  I can't tell where the problem is.

    Is there a way to test the DVD player?  Should I just replace it?

    Many brands of blank DVDs gives very inconsistent results when burning. If you use a brand store or generic blanks, that may be the problem.

  • Satellite U200: DVD - ROM does not work correctly

    DVD - ROM not working. After the fire of two optical drive DVD - RW, loss of ability to burn and can read only CD with difficulties of the sum. It is not possible to recovery operating system.

    Look like lost laser precise positioning device and can no longer read high-density data on DVD, but on the sum of CD singing can be found with difficulty.

    Your description sounds like a reader lens problem.
    Probably the lens can not calibrate in the right position, and that's why the drive can't handle DVD media.

    Bad news buddy this problem is not repairable with updates. Above all it s a hardware problem and the drive should be replaced!

    I would recommend contact the ASP which is responsible for you country to organise a replacement.

    Good bye

  • DVD burner does not work

    my DVD A DS8A2L-A ATA device has a code 10 and I tried micro soft Mr. fixit and I can't always burn a cd. any ideas on what to do next?

    Hi Isabelle,.

    1. did you of recent changes on the computer?

    2. what Microsoft fix it have installed on the computer?

    3. What is the version of Windows you are using?

    The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

    See the Microsoft article and try the steps mentioned below.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    http://support.Microsoft.com/kb/943104

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite A200 - internal microphone does not work?

    Toshiba Satellite A200-1YU, model No. PSAE3E-06201VRU, Windows Vista 32-bit SP2

    I can't get working internal mic - no sound is recorded using sound recorder or Skype (external mic works if connected to the outlet of the façade).
    Realtek HD driver 6.0.1.6167 version (2010-07-28)
    Chicony USB 2.0 Camera driver version 6.2.238.1217 (17/12/2007), Chicony Camera UVC 1.7.175.0123 software version
    2.60 BIOS version has

    Any suggestions?

    Internal microphone is enabled on the properties of the recording devices?

Maybe you are looking for

  • Cannot use recovery media - bad machine - Satellite A55-S106

    Hello My laptop recently got the blue screen of death and had to reformat my laptop. I jumped the drive and much to my surprise he told me bad machineeven if it's the drive that came with it when I bought it. Now I don't know what to do any suggestio

  • Photon: Notifying administrators of device-> Admin

    Hello I can't find information in the manual of the phone on this setting. Admin Notifier is intended to be an application that allows you to control some security settings, but I can't find or configure it. Any help would be appreciated. Thank you.

  • Film of chaining in iTunes

    ITunes allows me to channel films together during the play (a bit like a kiosk mode)? In other words, I have several movies at home of various lengths. When a film is finished, the next in the series will begin automatically, and so on through all th

  • How can I connect my smart keyboard to my iPad pro

    How can I connect my smart keyboard to my iPad pro

  • Microphone not working no-Conexant 20561 Smartaudio HD

    Hello ~ I use Windows 7 Ultimate on my Lenovo T500. My microphone suddenly stopped working. Why is this? It does detect not all sounds at all in the microphone or on Skype configuration screen even if it is the only device and it is selected. I have