off volume control

Similar Questions

• IOS App Remote - Volume control issues

  OK, so I downloaded the app recently released for Apple TV IOS. Everything works as expected, except the inconsistent Volume control.

  I have two Vizio TVs in my house - E701i-A3 and models M401i-A3. The volume via IOS app works perfectly on my E701i-A3 - pressing iPhone volume buttons triggers change in volume on the soundbar attached to this set.

  No luck with my M401i-A3 not set - by pressing the volume iPhone buttons does cause changes in local ringtone volume iPhone... that tells me something is not right with audio control EAC between ATV4 and the TV set. I do not use soundbar with this set - internal speakers only.

  Both sets are running the latest firmware of Vizio and CEC/audio is enabled. No problem to control the volume or turn the sets/turn off via the remote Siri material.

  Kind of ideas here... anyone have any ideas as to what the problem may be with my Vizio M401i-A3 defined? Someone at - it got IOS volume remote control works with other models of TV?

  Volume control requires HDM - CEC to ensure compatibility. It is quite possible that only one of your TV is compatible.

• HP slate 7 volume control does not

  Volume control stopped working a few days ago.  She slips back on the screen and volume button forces to do the same.  The volume never changes.

  Hello and welcome to the HP support community!

  Have you tried to reboot the device?

  You see a headphones icon in the corner?  Try to insert and remove a headphone jack.

  Does the device he uses a Bluetooth audio device?  Turn BlueTooth off, restart the device, and then try again.

  WyreNut

• Tecra M1 high slope Screech of volume control

  Hello:

  For a little while that now there was a sharp cry when the volume was turned up. He started at the upper end of the volume and systematically, it started when you only carefully increase the volume. Now the volume control should stay off.

  There is no interference when connected and it also happens when the computer is in stand-alone mode when they travel.

  Tecra M1 is now 18 months old and, also, the modem does not work with any sound by modem and the Port remains closed. It is now, when you are far away DSL, using a portable modem if wifi is not available.

  TIA.

  Martin

  [Edited by: admin]

  Hello

  In my opinion, you must change the speaker volume in the properties of the Modem software. As far as I know the settings should be set to the second stage.
  You can find it in: Device Manager-> Modem-> Modem Properties
  Second if you want to use the Modem must be disabled the option wait for the dial tone before dialing.

  Best regards

• Volume control icon on the toolbar disappeard

  I am connected to the computer and the volume control icon had disappeared. I googled and they said got check the setting of the volume-pane and there is an option "add to the toolbar. The option was not there... Thanks for your help!

  Hi Susan,.

  Click on the Start Menu, type icons in Notification area and press ENTER.  In the window that opens, click the turn system icons on or off.  In the next window, next to the entry for the Volume, make sure on is selected in the drop-down list, and then click Ok in this window and the previous.

  Kind regards

  DP - K

• my volume control on my taskbar does not work... why?

  Volume controls in Control Panel work very well... it's just that the bottom right does not work?

  Hi Rick Carabin77,

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2
  Turn off and turn the volume of the notification area icon.

  (a) click the start ORB

  (b) in the search line type TASKBAR and STARTMENU

  (c) of the list of programs select bar TASKS and STARTMENU

  (d) select the tab under the system section icons and Notification area, uncheck the option next to VOLUME.
  (e) restart the computer.
  (f) after the computer restarts, select the tab area of Notification and under the system icons section, place a check next to VOLUME.

  (g) click apply and then click OK

• Volume control touchpad does not work!

  I have a HP Pavilion dv6-1355dx notebook and the touchpad where my volume control / mute and wi - fi on / off toggle does not work anymore.  He has only started to happen after I did a Windows Update a few days ago.  Y at - it an update of the driver or something I need to do to fix it, or I'm just unlucky?

  Any help would be appreciated!  Thank you!

  Hello

  Try the following.  Stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.  Plug the power adapter (leave the battery) and start Notepad - see if the touch buttons now respond.

  Kind regards

  DP - K

• Wave volume control keeps resetting to level lowest

  Volume slider control wave reset automatically level the lowest volume.  Sometimes the cursor moves down, resulting no sound, sometimes the cursor remains stationary with no sound.  Still, I can click on the cursor and its takes a few moments and then turns off.  I checked my drivers and they are the most current available.  I am running Windows XP with SP 3.  Suggestions are appreciated.  Thank you.

  I'm also facing this problem.  It is events actually very predictable.  It occurs approximately every 90 seconds.  VERY... WEIRD!

  Through the "Process Monitor" sysinternals.com program, I traced the culprit to svchost.exe.  When this happens I see a 'RegSetValue"and is defined as follows:

  HKLM\System\CurrentControlSet\Control\DeviceClasses\{6994AD04-93EF-11D0-A3CC-00A0C9223196}\##?#HDAUDIO#FUNC_01&VEN_111D&DEV_76D5&SUBSYS_1028040B&REV_1001#4&160BAD3A&0&0001#{6994ad04-93ef-11d0-a3cc-00a0c9223196}\#RearWave\Device Parameters\Mixer\ 2\Controls\ 0\Channel 0
  Type: REG_DWORD, length: 4, given: 0

  HKLM\System\CurrentControlSet\Control\DeviceClasses\{6994AD04-93EF-11D0-A3CC-00A0C9223196}\##?#HDAUDIO#FUNC_01&VEN_111D&DEV_76D5&SUBSYS_1028040B&REV_1001#4&160BAD3A&0&0001#{6994ad04-93ef-11d0-a3cc-00a0c9223196}\#RearWave\Device Parameters\Mixer\ 2\Controls\ 0\Channel 1
  Type: REG_DWORD, length: 4, given: 0

  (I guess "Channel 0" and "Channel 1" is ' left' / 'Right' respectively "").

  If I change with Volume control program, 'data' that gets value are a value non-zero.  (Volume min = 0; Volume max = 65536)

  When I check the 'stack' for this event, I see the following.  (This has been exported in a CSV file.  Should be visible in MS Excel):

  'Frame', 'Module', 'Place', 'Address', 'path '.
  "0", "ntkrnlpa.exe", "ntkrnlpa.exe + 0x6a6cc","0x805416cc","C:\WINDOWS\system32\ntkrnlpa.exe.
  "1", "ntkrnlpa.exe", "ntkrnlpa.exe + 0x2a0f5","0x805010f5","C:\WINDOWS\system32\ntkrnlpa.exe.
  "2", "wdmaud.sys", "wdmaud.sys + 0x1259b","0xa35dd59b","C:\WINDOWS\system32\drivers\wdmaud.sys
  "3", "wdmaud.sys", "wdmaud.sys + 0x126bf","0xa35dd6bf","C:\WINDOWS\system32\drivers\wdmaud.sys.
  "4", "wdmaud.sys", "wdmaud.sys + 0xf60c","0xa35da60c","C:\WINDOWS\system32\drivers\wdmaud.sys
  "5", "wdmaud.sys", "wdmaud.sys + 0xb956","0xa35d6956","C:\WINDOWS\system32\drivers\wdmaud.sys.
  "6", "wdmaud.sys", "wdmaud.sys + 0x11c59","0xa35dcc59","C:\WINDOWS\system32\drivers\wdmaud.sys.
  "7", "wdmaud.sys", "wdmaud.sys + 0x169f","0xa35cc69f","C:\WINDOWS\system32\drivers\wdmaud.sys.
  "8", "wdmaud.sys", "wdmaud.sys + 0x10887","0xa35db887","C:\WINDOWS\system32\drivers\wdmaud.sys
  "9", "wdmaud.sys", "wdmaud.sys + 0xcca7","0xa35d7ca7","C:\WINDOWS\system32\drivers\wdmaud.sys.
  "10", "ntkrnlpa.exe", "ntkrnlpa.exe + 0x181e9","0x804ef1e9","C:\WINDOWS\system32\ntkrnlpa.exe
  "11", "ntkrnlpa.exe", "ntkrnlpa.exe + 0xa982f","0x8058082f","C:\WINDOWS\system32\ntkrnlpa.exe
  "12", "ntkrnlpa.exe", "ntkrnlpa.exe + 0xa2292","0x80579292","C:\WINDOWS\system32\ntkrnlpa.exe
  "13", "ntkrnlpa.exe", "ntkrnlpa.exe + 0x6a6cc","0x805416cc","C:\WINDOWS\system32\ntkrnlpa.exe

  Not really sure where to go from here, but it's very annoying! @!!

• monitor volume control charts

  Hi, I'm new here and hoping to get help with a problem to upgrade for my.

  HP Pavilion laptop dv61210sa.

  Original OS is Vista Home premium. All freshly installed wins 7 32-bit and updated all the drivers

  for hardware & software but have a minor problem. Not important but irritating.

  The Group of media (bezel) above the keyboard has a touch volume control / pause buttons

  [with lamps]. The volume control works & button mute but NOT on screen graphics that worked well with Vista.

  Features include a lamp of block numbers that works OK.

  The Internet button on / off that turns Orange / Off - Blue when on that will not function now and is

  orange & non-functional permantly.

  Please can someone tell me if it is a software problem or graphic material associated with 7 wins as a whole, it was

  fully functional with Vista Home premium 32-bit.

  Thank you very much for your support.  S John

  Hello

  Today I decided to restore the old hard drive with windows Vista installed on it Orig o/s and try to wear

  on an upgrade to 7 wins instead of the install again, I did recently on a new hard drive.

  I inserted the installation of 7 wins disk and update applied to which took about 4 hours to complete, but

  HEY!  I have now all graphics work with quick launch buttons, operating with the exception of the wi - fi card

  and the function of the button. I have information on the new motherboard, the make and model, so hoping to get help

  find the right wireless card which I believe now could be a Broadcom adapter for my laptop model.

  For anyone who plans to update in win 7 or 8, I recommend to perform the upgrade process.

  I found it slow, but very successful without much trouble trying to find all the updated drivers etc necessary.

  upgrade. I just wish I made it to begin and has saved me a lot of time and bother.

  Well, I'm a boy in my 50 and still learn to face technology haaaaaaa

  Thanks a lot for your help / concern. I hope that this episode will help all those who want to upgrade to

  the future...

  best regards: john

• I deleted my volume control, need to reinstall

  original title: VOLUME CONTROL ACCIDENTELLEMENT DELETED of NEEDS FOR RESTORING IT.

  SOMEWHERE I MUST HAVE DELETED MY VOLUME CONTROL PROGRAM MY SPEAKERS ARE PLUGGED IN AND BUZZ, BUT IT IS THERE HAS NO ICON ON THE BOTTOM RIGHT OF THE CLOCK OF TIME TO ACTIVATE THE ON/OFF/UP/DOWN. IT'S BEEN ABOUT 3-4 MONTHS NOW AND I TRIED TO RESTORE MY COMPUTER BUT MY RESTORE BACK AS FAR

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Method 1: Volume icon is not displayed in the notification area, and you may receive an error message when you try to add: http://support.microsoft.com/kb/319095

  Method 2: I also suggest that you install the updated drivers for the soundcard on the computer by visiting the manufacturer of the sound card and check if it works.

  How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

  For your reference: Description of Notification area settings.

  http://support.Microsoft.com/kb/279771

  Hope this information is useful.

• How to download volum control programe__

  How to download the programe of volum control

  Perhaps the volume icon was just off. Try: Control Panel >sounds and Audio devices > check "place Volume in the taskbar icon " Microsoft Security MVP, 2004-2011

• Disable the startup of the Volume control in the system icon tray.

  I need to disable volume control start in the system tray so that it does not show users that connect.

  So far, I've fiddled with regedit, msconfig and mmc.  I can turn it off for my own login, but when others open a session, it appears.

  Note: the volume must remain on and to a preset level (so I can't just delete or disable control of Volume of Mater).

  Also note: Perfessional XP

  Thank you
  ~ epsix.

  How to disable or limit access to the Panel (Windows NT, 2000, XP)

  1 - political group; to do this, click Start > run > and type gpedit.msc, and then press OK.
  2 - left under the Configuration section of the user select models of administration and click (+) and select Control Panel. On the right:
  3. in Windows 2000, double-click on turn off the control panel and in Windows XP, double-click on prevent access to the control panel.
  4 - select on, then press OK.

  To hide the items in the Panel of the Control Panel window:
  1. double click on hide the cmdlets specified control panel and select enabled.
  2 - click on view; in a new window, click Add.
  3. If you want to hide the Control Panel, the elements of the control panel type its name in the dialog box. For example: If you type system, Windows will hide the Control Panel's system icon.
  Note that group policy allows to hide control panel items in Control Panel, a professional user can type sysdm.cpl in the dialog box run and run the system properties. Please rate me upward if you find my post helpful. Thank you!

• My volume control button has disappeared from the lower right of my screen and when I go to the properties buttons are all gray and I can't click them how can we recover the volume button?

  My volume control button is gone off my screen and all buttons are gray when I click on properties and I try to click on volume and I can not so what I have to do?

  Salvation in the shade,

  Please see if the following tutorial helps:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Good luck!

  Kosh

• Grey ringer volume control

  I have a Z3 Compact with Android 5.1.1. The problem is that I can not change the ring volume. I don't have any other sound problems. As you can see from the screenshot, the ringtone volume control is grayed out. Any idea what could be the problem?

  

  You may need to perform a repair of software using PC Companion. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 80% battery.

  Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

  Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

• Windows Vista Volume control - several users connected

  Vista Home Premium. Several users. IE8 on a site playing music.
  fast user switching. The music heard in the new session of the user. Mixer volume control unable to see the other application users to turn off the music.
  How can I make Blender see other sound control applications users

  Hello gmayes,

  In addition to what Anthony has provided above the quick change of user in Windows Vista is designed to run programs that are specific to each user profile. This means that when you play the music in a single profile and use the fast user switching will continue to play music and the secondary profile will not have access to control the Web pages or the volume of the music played on the primary profile.

  Using programs of another quick switch mode user profile is not something that is supported by Vista right now.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.