Office has stopped working on Windows 8

Similar Questions

• Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

  Client to make VoIP calls

  I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

  I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

• Skype has stopped working and windows is looking for a solution.

  original title: problem with Skype

  I have been using Skype on my laptop for 12 months with no problems, all of a sudden, I get a message that Skype has stopped working and windows is looking for a solution.  I checked my firewall, windows updates and downloaded Direct X, as suggested by Skype. I've uninstalled Skype and downloaded again to make sure that the version lasted. IHAVE had also my whole system recharged but it did not work. I am at a loss to know what to do next. Someone at - it ideas

  Hello
  
  It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem

  Original title: games

  When I start my X Microsoft Flight Simulator (Deluxe Edition), it is running propely for some time (15 to 20 minutes) that it no longer works and gives me a message "Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem"and he have me to close the program. (I have Windows 7)

  Help, please. :)

  I just "uninstalled" pack of the accelerator, and it worked fine.

• Error: Matte final has stopped working and Windows is trying to find a solution

  Original title: Aunsoft final Mate software v 1.7.1 will not run on W7 machine

  I tried to run Aunsoft final Mate software v 1.7.1 on my W7 machine (Windows 7), but it always stops running until it actually launches.  I tried to install my Norton Security full suite uninstalled to ensure that any anti-spyware not wasn't in the way, and it still does not launch (after uninstalling Norton, I uninstalled final Mate and only reinstalled as well).  I keep getting the error message Final Mate has stopped working and Windows is trying to find a solution, which is does not work.

  Aunsoft crossed all their available technical means, but they could not understand whatever it is no more.  They have not said it's works fine on their machines of W7.

  I also tried to intall a product different from Aunsoft MTS Converter, just to see if that would go.  As with Final Mate, it seems to install fine, but also hang up when start and never actually starts.

  Anyone else have problems or suggestions on how to turn ugly Mate on W7 final enforcement?

  This is an old post. Still, I thought I would share my understanding of the problem. I've also faced this runtime error. This happened when the video files have been loaded from an external hard drive last sessions. When the session has been closed, these files were still listed in the source. It seems, when I started final Mate, it looks for the files and then shows the runtime error. When I connected this drive, this problem has been resolved. Therefore, the solution seems to be to ensure that the files are deleted from the source list before leaving the program.

  Hope this helps someone who knows the same problem now and google up to this discussion.

• "License for this product has stopped working" CS3 Windows 8.1

  I used CS3 without problems so far. I have not changed anything, and now when I launch Illustrator, InDesign, Photoshop and DreamWeaver, I get this error.

  Running Windows 8.1

  Creative Suite 3

  Windows 8.1 does not include the instructions that I found

  Error: "License has stopped working". Windows

  Before, when I had to reinstall the software, serial number did not because I install more than the allotted time. I called Adobe and they solve the problem. If I have to reinstall again, is there a phone number I can call? I can't find one on the Adobe Web site.

  Thanks for any comment on this issue. I appreciate all help.

  When you have a non-functional computer and cannot turn off

  Don't forget to request ONLY activation support set your number of activations

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990

• Outlook 2010 has stopped working after Windows updates

  November 11, 2015, my desktop, operating system Windows 7, installed about 28 updates to Windows. When I then put running the computer and open Microsoft Outlook 2010, Outlook closed almost immediately and this message appeared: "Microsoft Outlook has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "(I don't check other office software).

  After the problem with Outlook 2010, I rebooted the computer several times and each time has experienced the same problem with Outlook 2010.

  I used system restore to restore the system to before the updates of Windows, which included a critical update. Outlook, then worked correctly. I changed the settings for Windows Update to "Never check updates" so that Outlook is not yet damaged.

  Was it something wrong with the Windows updates?

  The problem was solved when Microsoft released a revised version of the KB3097877 update. Maxwell Joseph, moderator of the Forum Microsoft, announced this in the post, he created at 23:22:03 on November 12, 2015, on the thread titled "update KB3097877 crash.

  He said ' Microsoft has released a revised update, so we suggest you go ahead and uninstall Windows updates KB3097877 > installed updates. Restart the system and run the updates check and reinstall it back. »

• Explorer Windows has stopped working in Windows 7 Ultimate

  Hello

  I am facing this problem since 2 days. Notification of "Windows Explorer has stopped working" comes from the window and I am unable to work more in detail in my laptop. Even after restarting the program, it returns immediately.

  Signature of the problem:
  Problem event name: BEX
  Application name: Explorer.EXE
  Application version: 6.1.7601.17514
  Application timestamp: 4ce796f3
  Fault Module name: StackHash_0a9e
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 55f8ffff
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  I tried running SFC/scannow 3 - 4 times.

  I can't understand the program for which the fault might be.

  I tried also to requests www.nirsoft.net WhatIsHang but do not have the explanation of this too.

  Could someone help me out of this error.

  Kind regards

  Rakesh

  Thanks for the reply fast Gerry.

  The return of my office immediately, I found that my laptop works quite well and the error has been removed. May be he need just a reboot after all my tests.

  Thanks for all your support.

  Have a great day! :-)

  Kind regards

  Rakesh

• "Application has stopped working" - in windows 7 double started with windows server 2003.

  I did a system to dual-boot with windows server 2003 and windows 7 both 32 bit.

  Server works well, but in windows 7, not a single application as 'MS office', 'Adobe Reader10', "mozzila FF 17', USB modem software etc. can be installed." Application has stopped working-check online for the solution, close the program "-l' display message."

  These applications have been executed successfully on the same windows 7 installed alone, stand not to dual-boot.

  As for example, in the case of Mozilla, I get the following details of problem:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Installation of Firefox 17.0.1.exe

  Application version: 4.42.0.0

  Application timestamp: 5080c0b6

  Fault Module name: Firefox Setup 17.0.1.exe

  Fault Module Version: 4.42.0.0

  Timestamp of Module error: 5080c0b6

  Exception code: c0000005

  Exception offset: 00029000

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: c828

  More information 2: c8281d65ef26473d0d73e61539f36991

  3 more information: c4b2

  Additional information 4: c4b2e9bb96fe79d0a8d8b1d891ab6cf4

  These BONES are compatible?

  What is the solution?

  Help, please.

  Thank you...

  Hi Sounak,

  Thank you very much for the detailed information.

  You did changes to the computer before the show?

  The process of installing or uninstalling a program may fail for several reasons. This article describes the following issues (click on each question for corresponding resolution):

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Let us know the result.

• "Skype has stopped working" on Windows 8

  My Version of Skype is 7.21.0.100. I use Windows 8 Enterprise. I continually get "Skype has stopped working" message at the start of the application, and then Skype stops. Suddenly the problem started today. Previously, I was able to run Skype normally after one or two similar problemmatic begins. Not possible anymore. Results of the Dxdiag tool is attached.

  Any help will be appreciated.

  Thank you and best regards.

  Today my Skype has suddenly started to work properly, once again.

  Thanks for your support and your cooperation...

• Skype has stopped working! Windows 8.1

  Hello

  I just bought HP laptop with windows geiuine 8.1 15 - Skype was all working fine but suddenly don't know what has happened he got crashed and now whenever I start it - it crashes and says "Skype has stopped working".

  % Appdata % technique but also tried reinstall too - nothing works!

  I have attached the DxDiag report so that you can look at my PC correctly.

  Thank you

  Mercier

  You probably IM magician software installed on your computer and this software conflict with Skype.

  http://www.immagician.com/indexen.htm

  Try to uninstall this software.

  In addition, you have CyberLink YouCam application installed. This app crashes and is likely to cause problems with Skype too.

  Uninstall this application virtual CyberLink YouCam webcam.

• Error: "Windows Media Center has stopped working. Windows is checking for a solution. "when tried to open it after installing the KB983590 update

  Original title: WMC no longer works after update of August 10

  Windows Media Center has stopped working after installation of my Windows 7 Professional pc all 11 updates gave me on August 11, 2010. I used system restore to the day before the updates, and install them individually. The first 9 no trouble with WMC. But the IE8 KB982664 for Windows 7 compatibility view list caused my action center to report that I needed to check the undeclared solutions to problems. WMC would still start. But after installing KB983590 .NET framework 3.5.1 for Windows 7 x 86, WMC has stopped working.

  After you uninstall update 2 above WMC would still not start.

  After using the system again restore forward updates, I installed the other 9 updated with, so far, no problem with WMC.

  New installation of Windows 7 Pro.

  V.1.0.1963.0 MSE completely up to date. [have not installed the latest beta version due to this problem]

  Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

  Hi Davy-D,

  Step 1: Perform the upgrade on the spot
  a. close all applications, insert the DVD into the DVD drive of the computer.
  b. in the settings window, click install now.
  c. click go online to get the latest updates for installation (recommended).
  d. type the CD key if you are prompted to do so.
  e. click Yes to accept the Microsoft software license agreement.
  f. on the type of installation do you want? screen, click upgrade.
  g. when the installation is complete, restart your computer and check the difference.

  See Method 2 of this article: http://support.microsoft.com/kb/958044/en-us

  Very Important: Run a repair installation will not damage files and applications that are currently installed on your computer. However we recommend that you back up data, performing the steps incorrectly can delete data.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Top agent Office has stopped working.

  I have a drop to the bottom of the window that appears when I tried to load Microsoft Windows.  He says that desktopagenttray has stopped working.  I have the choice to start or continue.  I choose "debug", but he returned after my stop and restart.  What is it and the solution?

  Additional...

  Desk tray Agent is an application used by Qwest. If you do not need to do this, go to programs and features (or, Add and Remove) > locateInstaller of Qwest > uninstall it.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows has stopped working. Window is to check a solution to the problem...

  I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• "Windows Explorer has stopped working" / "restart windows" but after the reboot, the impossible to open my files. __

  Please how do l open my folders that l find dificult to find the required information.

  Hi Sabrina Awuah Aning

  (1) since when are you facing this problem?

  (2) when exactly it happens?

  Looks like the thread you are referring has been moved or merged.

  Method 1: Run the fixit available in the links below and check if that makes a difference

  Diagnose and repair Windows files and folders problems automatically

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  Method 2: You can follow the steps described in the article below, which deals with a similar question

  Error message when you log on to Windows Vista: "Windows Explorer has stopped working".

  http://support.Microsoft.com/kb/937093

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.