Office Jet 6210

Cannot close access cartridge BROKEN door HINGE

Hi toomik,.

Out of warranty Support Options

For a broken hinge, you need to call our technical support at the 800-474-6836 and check to see if there any update, that you would be interested. If you do not live in the United States / Canada region please click the link below to get help from your region number.

Regional contacts

HP trade-in program

Tags: HP Printers

Similar Questions

  • My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

    My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

    It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

  • HP OFFICE JET 6210 ALL IN ONE: stop hp 6210 all-in-one fax receive automatically once I have improved the line of pots to voip line

    I had printer for 6-7 years and never had a problem. I up graded my phone att pots line (plain old telephone system) the system to voip (voice over internet phone). I never had a problem to send and receive faxes. Now, I can only send faxes and not receive them, even with the automatic reply button on! The only rings (6210 HP) fax. Chat with people to send faxes reports the 6210 indicates the machine is busy, which is not the case. I checked the telephone connections and cables and still get the same results. I have checked the filters and hooked up to another fax machine (hp 8500 A909a) with the same results. I downloaded a updateded printer driver and still get the same results. I noticed when I sent a fax test fax hp service test, they sent a fax to the back but the fax would only ring unless I press the black / touch of color, it will leave a fax come through. Y at - it a remedy to this new problem. Help.

    Hi @MACMAN55 and welcome to the Forums of HP.

    I understand that you are having problems of fax. I would like to help.

    Switch to a VoIP system may cause problems.  The fax machine is designed to operate with an analog installation.

    I'm including a couple of documents with more information, as well as instructions on how to get the best performance from a line VoIP:

    Faxing on a voice over Internet Protocol (VoIP) Service

    Fax VoIP services

    Please let me know if you have any questions.  Thanks for posting on the HP Forums.

  • HP Office Jet 6210 8.1 on windows 32-bit will scan but not print.

    Used utility problems and no help.  Works on laptop with 8.1 Windows 64-bit, but not this desktop computer.  Stange scan but it does not print on the desktop.

    Hi zock01,

    Thanks for letting me know.

    I checked on our lab and the generic drivers are listed below for window 8 to add to see if this will allow you to print.

    Go to the start screen, the type (menu tiles) in "Devices and printers", select settings, click devices and printers.
    Click on add a printer in the upper part.

    Select "the printer that I want isn't listed."
    Click on 'add a local printer or network printer with manual settings.

    Click Next.
    Select "use an existing port," select "USB" in the menu drop-down.
    Click Next.
    Select "HP" in the column on the left and on the right, select 'Officejet Pro PCL3 class pilot.'

    You can also try the "HP Photosmart PCL3 class driver" or "HP Deskjet PCL3 class pilot."

    Thank you.

  • All-in-One HP Office Jet 6210: the Scanner Software for

    When I run the HP scanning utility, I get an error message that says that another program has control over the scanner. It is said to leave the program and try again. But no other program is launched that I can find. I tried scanning directly from the printer, but got the same message. I recently upgraded to MAC OS 10.8.5 and installed a bamboo tablet and pen. It is not the pen and the Tablet as I disabled it them to try to solve the problem. I got the latest driver from HP and installed but still the error. Anyone out there with any thoughts?

    Hello

    The application of scanning HP for your printer is not supported on Mountain Lion (OS X 10.8), the installed software is intended for previous operating system versions and scanning on your operating system is supported by Image Capture.

    First, click on the Apple icon and select software update, install any update HP available.

    Then try scanning through Capture of Image, it's the solution provided for your oeprating system:

    http://support.HP.com/us-en/document/c03550518

    Kind regards

    Shlomi

  • Office Jet Pro 8620: No Assistant HP printer or Application icon

    I'm under 10 64-bit Windows and the Office Jet Pro 8620.  I can't configure my scan-to-email of the printer (continues to request a code).  My printer is connected via Wi - Fi, and otherwise works fine.   Following the instructions of support, I tried the Printer Wizard, but there is no such program listed in my HP folder and no printer the Office Assistant icon (although there used).

    I downloaded all the updates current and running Scan Doctor several times.  No luck.

    Any help is appreciated.  Thank youl.

    Hello, GreenTurtle,

    Thanks for the quick response.  I followed your instructions.  After disconnection of the wireless connection and then the wizard of wireless, all re-installed configuration correctly.  The appropriate icon appeared on the desktop and I was able to put everything in place.

    I am very grateful for the help and quick response!

  • HP OFFICE JET 4620 is not compatible with windows 8.1

    Does anyone know when a compatible driver for Windows 8.1 will be available for the office jet 4620?

    Thank you

    KIPP

    Hi, it is available now here.

  • HP OfficeJet 3830: Printer HP Office Jet 3830 print labels? I can't find any option to change the thickness of the p.

    I need to print labels, sometimes one and sometimes pages of them.  When I put a sheet of labels in the Office Jet 3830 (in Word 16) the stuck sheet and would not go through the printer.  I can't find any way to adjust the thickness of the paper, not something thick like a page of blank labels.  If the printer has this function, how can I activate it?

    @vjdetling

    Printer:

    Range of all-in-one printers, HP OfficeJet 3830

    Full software features:

    File name: OJ3830_72.exe

    The specificationsindicate that the printer software can handle one type of media (paper type), titled "letter of card Index".

    Set your printing preferences / Print Preview to include

    • Media type 'Index Card letter'
    • Paper size: letter

    If includes it the list of media type, you can also try 'Matte of the Brochure' (wording varies)

    Help, suggestions and examples:

    Print Labels_Business-Cards_Cards

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click this post accept as Solution to help others find answers.

  • Office Jet Pro 8600: office jet pro 8600 clear the display

    I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools...  It isn't that I know where they are and who's who for the most part.

    In addition, scanning is not clear.  Everything is faded.  However, it still prints and faxes by a fine.  I hope I don't have to buy a new All In One Printer.  I finally got most of the glitches and tricks when I have a problem with it.  Is it possible that there is a light bulb needs to be changed or something?  I appreciate your help & feed back as soon as possible.  I use in an office on a daily basis.

    Kind regards

    Meredith

    Hey @mere4340,

    Welcome to the Forums of HP's Support.

    I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

    If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

    Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • HP 6500 Office Jet: is there a difference between an office jet 6500 and the other with a 'a' or 'more '.

    Hello, first post here.

    They gave me an office jet 6500 without the cd rom set up the disc. The Unit came with 4 new cartridges. Started trying to get to the top and running and first it attracts not paper. Checked this site and resolved that. (temporaily?) Then saw that it was low out of ink. Installed the new trolleys. Colors work very well, but not black.

    I have no cd rom for this and not manual.

    I see that you can download the establishment, but was intrigued by the mention of a 6500 and 6500 more, not sure I have those. On the front it says "HP office jet 6500 wireless.

    So I guess I have to run the cleaning jet. I started scrolling menu, but was rerouted it says there is no connected computer. Do I need to clean the jets?

    I could shoot for today with a work properly stand-alone copy/printer. But I would not mind at all followed with setting up wireless on my sony pcv-rx752 pc. We use at + t here with a wireless router.

    Hello

    First, click on the install button, select network and follow the Wireless Setup Wizard to connect the printer to your home network.

    Then download and install the following drivers for wireless HP Officejet 6500 (E709n) model:

    The 6500 has a different model then one you have...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77752-3 & CC = US & DLC = in & LC = on & os = 228 & productOid = 3795393 & sw_lang =

    Shlomi

  • Office Jet 8610: Device appearing is not in the device tab connected hp after entering the claim code (for the second time)

    I got the claim code to register my hp device connected for the second time and on both occasions, it doesn't have to be displayed in the devices tab.

    I tried a disconnection and logging into my account, but this has not solved the problem.

    I tried the two Chrome Version 39.0.2171.95 (64-bit) and Firefox 31.0 on a MacBook Pro running Mac OS 10.9

    Printer is an Office Jet 8610

    Web services are enabled and the printer is connected to the network.  I created the computer print jobs and they have successfully completed.

    * beep *?

    The problem disappeared after I checked my email address

  • 3830 HP Office Jet: Enter keywords

    My HP Office Jet 3830 does not recognize several pages prints only the first page.

    Welcome to the HP Forums, I hope that you are @cemoz,

    I came across your post on your Officejet 3830 only print the first page of a document to your system of Windows 8, and I wanted to stop to troubleshooting suggestions.

    Here are a few steps you can try:

    1. try to print the document from another web browser or program. For example, if you use Edge for example, try using Google Chrome or Firefox.

    2. run the print and scan the doctor for Windows in order to solve printer problems

    3 uninstall the printer, restart your computer, reinstall the printer in running the Printer Wizard

    4. try to re-registration of the document and then try again to print.

    If you have trouble, let me know and I'll do my best to help.

    Hit the "Accept as Solution" If we have reached a solution and the "thumbs up" to say thank you for my help.

    Have a nice day

  • Office Jet 8620: Networked 8620 Pro always 'offline' in Windows 10

    My Office Jet Pro 8620 is still retained as 'offline' Windows 10, even if my printer Hp Assistant still connect to it fine.  The printer is on a network via ethernet cable and is always available via the internet printing as well.

    I finally gave up using the HP driver for device Pro 8620 and 8620 name and started using HP ePrint as my printer driver default, which seems to have solved the problem for now.

    I checked the version of my driver 8620 and HP reports it as current.  Is there a newer driver coming that will address this problem or, Alternatively, is there a generic Windows driver that I can use which will correctly yield the printer to be online?

    Thank you.

    Hello

    Thank you for using the forum.

    You can try creating a TCP/IP port?

    Creating a TCP IP port

    1. Print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
    2. On your PC, go to control panel configuration, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
    3. Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
    4. Type the IP address for the printer.

    Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

    Thank you.

  • Pavilion Intel Core i3 8 GB of RAM: How can I get my HP Office Jet Pro 8600 printer to work using Windows 10?

    With the help of a Microsoft Windows 10 w / a HP Office Jet Pro 8600. How can I get the printer to operate windows 10?

    Hello

    Please download the software package and the following driver and install on your computer (s) 10 of Windows:

    http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

    Kind regards.

  • How to scan using your HP Office Jet Pro 8600

    Well, I got my answer because I could not find a topic 'resolved' in this regard. So I decided to post my findings to help the next interrogator (is that a word = the one interviewing). FYI - I am not a "geek", and while I can find my way around a computer it sometimes takes a while.  Also, I have Windows 7 on this laptop if it makes a difference.

    1. go to control panel and choose:

    2. material and audio, then

    3 devices and printers, then

    4 fax - HP Office Jet Pro 8600 (network) or whatever printer choice applies to your situation, then

    5 HP Printer Wizard, then

    6 scanner activities, then

    7. analyze a document or a picture, then

    8. Save as PDF

    9 scan

    10. save in a folder you choose

    I know this may seem simplistic to most of you, but maybe someone like me is out there, trying to find this out and this could help.

    Roxi

    Hello Acupuncture,

    Thank you for posting your solution you found yourself, on the use of the scanning function on your HP OfficeJet Pro 8600. I apologize as we were not fast enough to answer one of your questions on the Forums of HP Support. I've been able to check your user page but could not find your original post on us asking how Scan, did you remove the question? Anyway I'm glad you are now to the top and scanning of your JO 8600.

    For later use, I would like to you to take a look here: how Scan: Windows 7, here we will give all the options and shortcuts on scanning with or without the HP software as well as a few cool features, like the scan from the front panel of your 8600 and adding several pages in a single file.

    Yet once I thank you for taking the time to help other members of the community, so thank you once again!

Maybe you are looking for