Office Jet 7310 all in printing problems

Similar Questions

• HP Office Jet 6000 wireless duplex printing problem

  (Note: all printers updates have been made)

  Printer works great as duplex, however:

  I try to Print Duplex (1/2 letter size pages - portrait booklet with the paper size of 8.5 "x 5.5" ).

  When I go to print I select the paper size for brochure (predefined size as shown above), however deselects the duplex option and manual is the only option.

  If I reselect Duplex then the size of the paper goes back to 8 1/2 "x 11".

  It's normal for duplex printing on non-standard paper?

  I know I can do it manually by printing one side at the time, but it defeats the purpose.

  Thanks in advance for any answers/ideas.

  blperry2001, I responded earlier to a similar post here (http://goo.gl/tcbiM) to explain why some paper sizes are not able to print.

  A list of most of the formats accepted for our printers can be found here (http://goo.gl/Bwv10), although according to their use some sizes may not be supported.

  I hope this helps!

• Installation for HP Office Jet 7210 all-in-One printer problem

  I try to install HP Office Jet 7210 all-in-one printer.

  My operating system is Windows Vista Home Premium, service pack 1

  My computer is an AMD Athlon 64 x 2 Dual Core Processor 5000 + 2.61 GHz, with 2 GB of RAM and on the 32-bit operating system

  When I go through the guests to the screen, I get two errors.

  (1) is due to an error of operation. As I have Vista it triggers a caveat, but I understand that this can be ignored and continued

  (2) the system can be installed using the "Run As" command... ». Apparently, I need to re - login as administrator. I am connected with the admin privaledges so not sure how to fix this

  Appreciate your help.

  I'm sure that yu you are trying to install from the installation to Windows XP CD. Try to download the software from THIS page and try to install.

• My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

  My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

  It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

• Office jet while a 6600 PRINTER with scanner problems. but I can't scan where I have a modifiable document because only let's scan me documents I can not edit

  original title * Bubbles44

  I have an office jet while a 6600 PRINTER with scanner problems. I am trying to scan to my hp Pavilion 23 all in a computer with windows 8, but I can't scan where I have a modifiable document because only let's scan me documents I can not edit! HELP ME PLEASE!

  Hello Sharon,

  Thanks for posting your query on the Microsoft Community.

  I would be grateful if you could answer the following questions:

  How the computers are connected? If they are connected as a workgroup or domain?

  Method 1: Disable the security software and check if the printer works.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: You can turn off the Windows Firewall and see if you can print.

  1. Press the Windows key +X key.
  2. Select Control Panel.
  3. Click on the firewallof Windows .
  4. Select enable the Windows Firewall On or off on the right next to the sign.
  5. Select the radio buttons Turn off firewall under Private and Public network settings

  Warning: after reviewing the issue, turn on the firewall.

  Method 3: Refer to the suggestions for the following links.

  How to troubleshoot printing problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps and let us know the State of the question, we will be happy to help you.

  Thank you.

• HP Office Jet J6480 All In One - will not analyze with Mac OS 10,8.3

  I could not get my HP Office Jet J6480 All In One scanner after upgrading to 10.8.3.I followed other positions and have installed the most up to date driver (http://support.apple.com/kb/DL907) , but whenever I try to scan from the HP Device Manager or photosmart studio, it says "sorry, scanner could not be initialized. (scanner not found) "I tried to make sure there is no other updates by clicking settings in the Device Manager by clicking on check the updates but it says 'server not available - service software is currently not available. "Please try again later" and I got this error for the last week.

  I followed the second set of instructions available here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve this problem and install the software found on the link. I restarted my computer and I always meet the same problem.

  Note: My printer is wireless and I have not hooked by a cable. Will make a difference?

  My printer seems to be printing very well.

  Thanks for any help you can provide.

  Sara

  To add, both HP Device Manager or photosmart studio are part of the software and not designed for Mac OS X 10.8 10.5.

  Here are the steps to scan with your printer on mountian lion, make sure to run the software update first to ensure that the latest HP drivers are installed:

  http://support.HP.com/us-en/document/c03550518

  Where the scanning software do not work as expected, that more probably caused by incompatible drivers installed on your system.

  In this case, remember to remove the software by following the HP uninstaller program (under Applications > Hewlett-Packard), rebot Mac and install the correct software by following the steps below:

  http://support.HP.com/us-en/document/c03378792

  Shlomi

• HP Office Jet J4680C All In One is offline now

  Original title: printer offline

  Our printer HP Office Jet J4680C All In One is currently offline. Have checked all the connections and made the troubleshooting steps and we are still unable to print? Help!

  Hi Wally,

  1 have. what troubleshooting measures you tried?

  2. did you of recent changes on the system?

  I suggest you to try the steps in the following article and see if that helps.
  Printer in Windows problems

  You can read the following article and check.
  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

  See also:

  Why can I not print?

  Hope this information is useful.

• HP Office Jet 5610 all in one does not appear with the fax

  I got a new computer with Windows 7 when I added my printer HP Office Jet 5610 all in one, it does not appear with the fax.  When I tried to install it with the disc from the printer, he Wouln't install.  What is the problem? I really need on the part of the printer fax.

  Hello

  Try this maybe this will help.

  -Type fax in the research - type on Windows and scan-new fax fax...

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• How do you set the time and date for the fax on HP Office Jet 4622 all-in-one printer?

  I installed the all-in-one printer HP Office Jet 4622 and everything works like.  However on the test page for the date and fax are showing Jan-00-00 00:00 AM.  I don't know how to change the date and time.  Help, please.  Thank you.

  Use the Setup (wrench) button on the front of the printer to look through the settings menu to set the date and time of the printer.

• 5510 HP printer all in one, sc: Office jet 5510 all in only one forum

  I have a HP Officejet 5510 all-in-one. When I copy a document or fax a document. The pages are black with white lettering. Practically illegible. Having installed two new ink cartridges. Also when trying to align after the first sheet, the one that put you on the glass is not recognized for alignment.  Appreciate any suggestions to solve my problem

  Hi @Hazran,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer all-in-one HP Officejet 5510 which produces copies and faxes that are illegible with white lettering on a black background. I would like to help with that.

  The fact that this occurs when the copy and fax indicates that it is a problem of printer hardware.

  I would start by doing a Reset of the power on the printer.

  

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Office Jet 7310: 7310 HP Office Jet 0x886996ba error Code

  What does this code mean... 7310 HP Office Jet 0x886996ba error code...   It appears on the small screen on the printer itself. I tried uplugging and restart the printer, but nothing seems to work... Help... Anyone know what this could be? Thank you for your time...

  Hi @braintastic,

  Welcome to the HP Forums!

  I noticed that you got the 0x886996ba error code with your HP Officejet 7310. I am pleased to see that for you!

  Please have a look through this guide, "Problem with print head", "Printer failure", "Ink system failure", or "0 x." r "C2."... "Control panel displays error on the printer.

  Hope this solves your problem and have a nice day!

• HP Office Jet 3830: New HP3830 printer ignores printing lines

  Brand new Office Jet 3830 installed as wireless today. Installation OK. Problem is that the printer does not print half superior to most of the lines of print. This problem up and down the page. Used tools to align printer (3 times), cleaning cartridge, smear own page, report print quality and all printer is OK. Any ideas on how to solve the problem would be appreciated.

  Thank you for taking the time to look at my problem. I discovered that the printer is configured to print a 'project' and when I changed 'black and white' usually the problem disappeared. But I'll keep your handy proposed remedies where the problem occurs in the future.

  Thanks Allan

• Office Jet Pro 8100 sometimes prints random text

  I have a new Office Jet Pro 8100 and I love it!  However, sometimes when print a monthly newsletter or magazine text will become jumbled up garbage.  Text that is embedded in the images is ok, but sometimes not.  That I remember that this only happens with pdf documents.

  If I come back and re - print pages, it comes out ok.  Sometimes, several pages are ok and then the text will be jumbled up.

  What is a printer problem, or something in the text document upset the printer?

  Hello

  If the problem persists, please use the following document to solve the problem; Page impriment continuous characters strange or scrambled in Windows.

  I look forward to hear from you.

• Office Jet Pro 8610: El Capitan problem - error =-19 unsupported color space

  Q: problem for you to connect to HP Office Jet Pro 8610

  Apple - iMac 21.5 "®-Intel Core i5 (1.6 GHz) - memory of 8 GB - 1 TB hard"

  El Capitan
  
  Printer: HP OfficeJet Pro 8610
  
  Help my printer set-up of mother-in-law to his new iMac. Wi - Fi connection; It will display the page of 'test' for the HP Mac utility. Printing from an application (Mail, etc.) results in "unsupported Colorspace = - 19" error.
  
  I uninstalled and ran disk first aid and re-connected. I deleted Printers/Scanners and added in. Various combinations of the above steps with re - starts between the two. Am already balding, can't afford to get out more. Any advice greatly appreciated.

  Well, to refine the question, you have a blue flashing or a solid blue light on the printer?