Office Jet 8600 Plus: Office jet 8600 preparation for shipping

Similar Questions

• I am trying to download my free trial of Microsoft office. It worked for 6 hours and it is stuck at 58%. Don't know if it's important, but I praise this computer.

  I am trying to download my free trial of microsoft office.  It worked for 6 hours, years is stuck at 58%.  Don't know if it's important, but I praise this computer.

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Drivers for Visioneer One Touch 8600 Scanner for Windows 7

  Are there drivers for Visioneer One Touch 8600 Scanner for Windows 7

  Hello Pepe,

  According to the manufacturer support site, this product is classified as "End of Life". End of life means that it is no longer supported, which includes no new drivers. You can read this article for reference: specifications of Visioneer OneTouch 8600

  Thank you.

• Our office has 10 licenses for Adobe Acrobat Pro.  One of our computers crashed so we want to deactivate the license and reinstall on a new computer.  How can we check the serial number on Acrobat Pro installed on each computer to determine which series

  Our office has 10 licenses for Adobe Acrobat Pro.  One of our computers crashed so we want to deactivate the license and reinstall on a new computer.  How can we check the serial number on Acrobat Pro installed on each computer to determine what serial number is now unused?  I don't want to die with the computer software

  Hi John,.

  It is not possible to disable the license from one computer crashed or possible to check which serial number has been used on computer because they are encrypted.

  A retail license is good to be installed on 2 machines. I checked your account and found 4 different serial numbers of Acrobat registered for your account.

  It is always suggested to buy a volume license, if you have more than 2 machines instead of buy 4 different serial numbers.

  I checked all the serial numbers entered and you have sufficient activation count remaining to cover all your machines.

  Kind regards

  Rave

• Office State is waiting for the agent

  Dear all,

  I manually installed agent to view a VM comments (ESX4.1), which is managed by a Virtual Center.

  And then I add an individual office by the Administor Console view.

  The status of office is still waiting for the agent.

  Could you give points for this problem?

  Thank you

  Dennis Dai

  Two common reasons is firewall or DNS problems.

  Disable the local firewall and make sure nameresolution works in two ways.

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• Windows install... Preparation for installation

  I can't open my documents, Word or Excel... with a pop-up box saying Windows Installer... preparing for installation.

  So of course nothing happens...

  then another pop up box says... This patch Package could not be opened.

                                                         Verify that the hotfix package excists and you can access them

                                                         or contact the application vendor to verify that this is a valid Windows Installer patch package.

  I hope someone can help with advice and or a link to help me solve this problem, because it drives me crazy.

  Looking forward to responses and I hope to get this problem fixed.

  Salvation is n,.
   
  Follow the steps listed in this article to resolve the problem:
  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "the installation source for the product is not available.

• Every time I open a file in Media Player 11, I get a dialog box telling me that Windows Installer is "preparation for installation.

  Whenever I open a file in Microsoft Media Player 11, (11.0.5721.5280) I get a dialog box telling me that Windows Installer is "preparation for installation.

  He tell me what it is trying to install and crashes

  No media plays back.

  Cancellation does not - it retrys with encouraging them. The only way to get rid of the dialogue is Ctrl/Alt/Del and end task. It also closes WMP11

  SP3 Win XP32

  I just installed Office 10

  I ran the repair of Office 10

  I uninstalled WMP11 and reinstalled

  I ran "Fix IT" page Support MS

  I run MS Security Essentials... It is to this day and I run a full scan

  I think you meant:

  "a. initially, box run, type"msiexec /unreg", and then press ENTER."

  I did and it helped somewhat. Message anyway, but he went and the media played.

  If I did:

  "(b) then type" msiexec/regserver"and press ENTER."

  The problem comes back

  I went a step further and ran a restoration of the system to the day, I installed Office - it worked.

• Preparing for first use Outlook.

  I applied office 2013 models and my user settings seem to be saved, but whenever I run outlook from a new non-persistent session application, it crosses the minute 5 "preparing for first use Outlook."

  Is this typical? any ideas how to make so that it can start normally as it would have done with the former manager of profile?

  Ok thank you

  Have you created an EMU config file to save the. OST /. With EMU PST file? If this isn't the case, would this then, that every time that you start Outlook, PST/OST files is created (preparation for first use Outlook)?

  The best way is to redirect your. OST /. PST file in the network or the user's home directory. (so if possible, try to find out why Outlook ignores your redirection)

  Raymond

• Time Machine is constantly preparing for backup.

  I use my iOmega external hard drive to back up my Mac Pro for the past 5 years.  Now, all of a sudden, he is constantly preparing for backup.  Any suggestion of back me to normal will be appreciated.

  Try:

  http://pondini.org/TM/D1.html

  Stuck in the "Preparation" or "calculating the change."

• How should I prepare for El Capitan 10.11.2?

  Hi all

  As the title asks, how should I prepare for this upgrade?

  I had already installed El Capitan 10.11.0, but quickly returned to 10.10.5 after discovering several problems:

  1 (2 x 1 x POP, IMAP) e-mail accounts - problems with lack of mailboxes, mail lost, unable to send mail, etc.

  2. Time Machine backups were not held as scheduled when my iMac end of 2013 has been plugged into my ups APC.

  3. casual does not recognize my USB Superdrive.

  After the restoration of my old system of Time Machine, I followed several thread on these forums to see what others have experienced with the 10.11.2 release.

  My iMac does not have any third-party software with the exception of my HP ENVY 4502 print utility.

  How should other ensuring that Time Machine backs up current, I prepare for this facility to ensure that I do not lose important emails from my accounts {2 x iCould (IMAP) and Comcast (POP3) 1 x}?

  You know, honestly until that Apple's software team act together and reflection on the QUALITY rather than pretty flowers I'd wait for a few weeks to a month.  Or, at least until more people have put to date to see if there are problems.

  So, to answer your question, make sure you have at least 2 strong BACKUPS before you update.

• How the 'registration' identity can be removed when a computer prepares for recycling?

  How the 'registration' identity can be removed when a computer prepares for recycling?  I'll give my old PC for a facility that reconditions them.  I removed almost everything that could lead to my identity used but I've not found a way to change or remove the name that the software is registered.   Any ideas?   Also how hard disk would be restructured uning windows home?

  Boot from your WIndows installation CD-ROM.  You will be able to erase the hard drive from there.

• I have windows xp and whenever I click on Installer Windows icon comes out and says it: preparation for the installation and it takes a while to come

  I have windows xp and whenever I click on an installer of winows icon comes out and says it: preparation for the installation and it takes a while to come

  Hi DanBourque

   

  1 does the problem occur when you click the icon of the exe file or any application shortcut icon as well?
  2. for how long have you been faced with this problem?

  3. did you of recent changes on the computer?

   

  You can re-register Windows Installer and check if this helps-
  a. Quit all Windows programs.
  b. click Start, click run, type msiexec /Unregister in the Open box and then click OK.
  c. click Start, click run, type msiexec/regserver in the Open box and then click OK.
  d. restart your computer.

  I hope this helps.

• MSI - preparation for installation message appears when Internet Explorer is opened

  Original title: windows setup

  whenever I have open internet explorer, a small 'windows install... preparation for installing' window.  I downloa ded windows install 4.5, but no abail. Any suggestions would be greatly appeciated. Thank you. Ric

  Hello

  ·        This occurs only when you click on internet explore or with all applications?

  ·        Remember to make changes to the system?

  ·        What version of internet explore is installed on the system?

  I suggest you follow the methods mentioned below.

   

  Method 1:

  I suggest you unregister and re-register the Windows Installer on the system.

  a. sign in to your computer as an administrator.

  b. Click Start and then click Run.

  (c) in the Open box, type cmd and then click OK.

  d. at the command prompt, type msiexec.exe / unregister and then press ENTER.

  e. type msiexec/regserver, and then press ENTER.

  Now, check if the problem is resolved.

  Method 2:

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.

  http://support.Microsoft.com/kb/322756

   

  I suggest you repair Windows Installer

  a. Click Start, go to run, type "Regedit" and press ENTER.

  b. in the registry editor, navigate to the following registry folder:

  'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer' by clicking on the sign MORE (+) sign.

  c. highlight the "MSIServer" folder in the left pane and double-click "ImagePath" on the item in the right pane.

  d. its value should be 'C:\Windows\System32\msiexec.exe V' (without the quotes). If this is not the case, change the above value.

  Note: There is a space between msiexec.exe and c I assume that Windows is installed on drive C.

  e. restart your computer.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Preparation for installation at each connection, but what?

  Windows XP Pro with SP3, stable for years.

  But now since one some time to Setup tries to install 'something' after the connection very. The "preparation for installation" prompt appears, unfortunately, never says what it is trying to install, as I know that it takes 30 sec suspended in this popup, appearing 3 - 4 times in a row each whenever I have connection. And no 'usual remedy' has contributed to this day:

  (1) check for product Red
  (2) regedit, search for the names of products already installed.
  (3) analysis of the registry: all deleted using WiseRegistryCheck and CCleaners as well.
  (4) windows install cleanup tool v3.00.00.0000: I don't see all of the unknown elements...
  (5) manual cleaning of all TEMP directories and all these.
  (6) the manual analysis of services for unknown names
  (7) viruas scan and adware

  Could someone help me identify the culprit?
  Under settings, I still find a plethora of log files in the directory temp, like this:

  = Recording started: 2009-10-28 17:34:09 Build type: SHIP UNICODE 3.01.4001.5512 appeal process: C:\PROGRA~1\COMMON~1\INSTAL~1\UPDATE~1\agent.exe =.
  MSI (c) (3:7 C) [17:34:09:453]: Resetting cached policy values
  MSI (c) (3:7 C) [17:34:09:453]: value of strategy Machine 'Debug' is 0
  MSI (c) (3:7 C) [17:34:09:453]: * RunEngine:
  Product: {39717325-70B0-4965-AE41-D24F78EC69B5}
  Action:
  Command line:
  MSI (c) (3:7 C) [17:34:09:453]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (3:7 C) [17:34:09:453]: grabbed execution mutex.
  MSI (c) (3:7 C) [17:34:09:453]: Cloaking enabled.
  MSI (c) (3:7 C) [17:34:09:453]: attempt of activation of all disabled priveleges before calling install on server
  MSI (c) (3:7 C) [17:34:09:453]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (14:A0) [17:34:09:453]: grabbed execution mutex.
  MSI (s) (14:84) [17:34:09:453]: Resetting cached policy values
  MSI (s) (14:84) [17:34:09:453]: value of strategy Machine 'Debug' is 0
  MSI (s) (14:84) [17:34:09:453]: * RunEngine:
  Product: {39717325-70B0-4965-AE41-D24F78EC69B5}
  Action:
  Command line:
  MSI (s) (14:84) [17:34:09:453]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (14:84) [17:34:09:453]: MainEngineThread returns 1605
  MSI (c) (3:7 C) [17:34:09:453]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (3:7 C) [17:34:09:453]: MainEngineThread returns 1605
  = Recording stopped: 2009-10-28 17:34:09 =.

  This agent.exe is Macrovision. Another example is:

  = Recording started: 2009-10-28 17:34:04 Build type: SHIP UNICODE 3.01.4001.5512 appeal process: C:\Program Files\Common Files\InstallShield\UpdateService\isuspm.exe =.
  ... etc.

  However, this seems to be a check once a week for updates for several products supplied with my Dell. So I'm still confused why this is happening now and how to turn it off.

  Thomas, CA

  Thomas,
  Looks like you did a lot to try to find the culprit.  One thing that I do not see you mention performs a clean boot.  If you haven't tried that I implement that and then restart and see if Setup returns to the top.

  Follow the steps in this article to resolve problems with a clean boot.

  Advanced problem resolution by clean restart.

  Let me know if this helps.  Also have you looked in the Application section in the event viewer and saw all errors related to this?

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• device disappeared from the system without first be prepared for removal. __

  The following error message has appeard in the event where the journal and I can't find my wireless network device. Driver has been reinstalled with no success. This means that the material is not? Error message is:

  The device "LAN-Express AS IEEE 802.11 g PCI-E adapt ' (PCI\VEN_168C & DEV_001C & SUBSYS_E000105B & REV_01\4 & d69bda5 & 0 & 00E2) disappeared from the system without first be prepared for removal."

  
  

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  See you soon.

  Mick Murphy - Microsoft partner