Office jet pro 6830: 6830 pro office jet print to fax

I use print green to reduce the number of pages unnecessary. The only option I have is to Fax jet Office 6830 pro, it will send only to the fax. I tried to reinstall the printer, but it remains the same. I have a request to print green but no answer yet. When I check the properties of the printer there is no jet office fax pro 6830. Thank you

Hi, after the 4th reinstalled it now works right. Thank you

Tags: HP Printers

Similar Questions

  • HP Officejet Pro 8600 N911a: HP Officejet Pro 8600 N911a - Print when Fax is not saved

    Can I do so a fax is printed when it is not registered?

    I know that I can put to print and save every time, but I trust HP digital fax to save paper.

    If a fax is not registered, either because of a network error, or if the computer that logs usually in is cut off, can just fax be printed?

    @MrMeow, it's nice to meet you.

    I think I found something that can help your fax dilemma.

    This information has been in the User Guide for the Officejet Pro 8600 e-all-in-one - N911a; PG 69.

    Set up backup fax

    According to your needs best and security, you can configure the printer to store all faxes it receives, only faxes it receives while the printer is in an error condition, or none of the faxes it receives.

    The following fax backup modes are available:

    On >  The default setting. When backup fax is enabled, the printer stores all faxes received in memory. This allows you to reprint up to eight more recently printed faxes if they are always saved in the memory.

    NOTE: When the memory of the printer is low, it replaces faxes print, older because it receives new faxes. If the memory is full of unprinted faxes, printer stop to answer incoming fax calls.

    NOTE: If you receive a fax that is too large, as a very detailed color photo, it cannot be stored in memory due to limitations of memory.

    Error only > Causes the printer to store faxes in memory only if there is an error condition that prevents the printer to print the faxes (for example, if the printer is out of paper). The printer continues to store incoming faxes, as long as the memory is available. (If the memory is full, the printer stops responding to incoming fax calls). When the error condition is resolved, the faxes stored in memory automatically, print and then they are deleted from the memory.

    Off >  Faxes are never stored in memory. For example, you might want to disable fax backup for security reasons. If an error condition occurs which prevents the printer to print (for example, tracks paper printer), the printer stops responding to incoming fax calls.

    NOTE: If the backup fax is turned on and you turn the printer off, all faxes stored in memory are deleted, including any unprinted faxes that you might receive while the printer was in an error condition. You must contact the senders asking them to return the unprinted faxes. To get a list of faxes that you have received, print the Fax log. The Fax journal is not removed when the printer is off.

    To set backup fax from the printer control panel

    1 tap (right arrow) and select Setup.

    2. press Fax Setup, and then click Advanced fax setup.

    3. press on the backup Fax reception.

    4. press on , error, or out of service.

    Reprint of faxes received from memory

    If you set backup fax mode to On, received faxes are stored in memory, whether the printer has an error condition or not.

    NOTE: After that the memory is full, the oldest faxes, prints are replaced as new faxes are received. If all stored faxes are not printed, the printer does not receive fax calls until you print or erase memory faxes. You can also delete the faxes in memory for purposes of confidentiality or security.

    According to the sizes of the faxes in memory, you can reprint up to eight more recently printed faxes, if they are still in memory. For example, you will need to re - print your faxes if you have lost the copy of your last draw.

    To reprint the faxes in memory from the printer control panel

    1. make sure you have loaded paper in the main tray.

    2 tap (right arrow) and select Setup.

    3. touch Tools , or Faxand then select reprint faxes in memory. The faxes are printed in reverse order, where they were received with the most recently received fax printed first, and so on.

    4. If you want to stop reprinting the faxes in memory, press the Cancel button.

    Please let me know if these steps solved your problem, or if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • M127FW MFP: Laser Jet MFP M127FW Pro stuck displaying "printing Page Fax: 2.


    I managed to Flash the newly updated firmware. I didn't have to clear the NVRAM. Thanks for the PM has even thought that I didn't need her. Good to know if it happens again.

  • Laser Jet MFP M127FW Pro: Will not stop "hologram fax page 1" and is stuck in this mode

    I have Laser Jet Pro MFP M127FW.  This morning, a fax came through, and printed, however, the touchscreen rpet ' Print Fax: 1 Page, "with absolutely nothing to print.  I can now no longer print documents, or send and receive faxes again.    When I leave on this screen, the message disappears and comes back about a minute later for inactivity.  I tried to unplug and plug the unit in the.  I tried to use the switch to stop the machine.  When the powers of the slot machine, he will immediately return to the ' print fax Page: 1. " I tried clear memory and also the power resets. I keep reading on a Ret NVRAM and I would try it, but can't find anywhere it is displayed!

    It is a real problem for me because I use the fax machine throughout the day!  Can someone help me?  Thank you so much in advance!

    Hey @nhorn1115,

    Welcome to the Forums of HP Support!

    I understand that you have a fax job that will not print from your printer Laserjet M127fw range. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. When done, remove the cable from the back of the printer's fax. Now:

    1. Click on the configuration icon that looks like a key.
    2. Click on Service.
    3. Click Fax Service.
    4. Click clear saved faxes.
    5. Connect the cable of the fax.

    Please let me know if this clears the stuck fax. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • HP Office jet 6700: disabled network HP office jet printer capabilities

    Please help, my Hp office jet printer will not conect to internet it says the built in network capacity have been disabled and contact the network administrator

    Hi @shell1,

    I can help you reset the printer to get the network features reactivated.

    I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

    This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

    There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

    A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

    Printer resets: What You Should Know by @Bob_Headrick

    Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  • MS Office 2010 Pro and my printer does not work,

    I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
    All the apps work except in order to print it.
    I am running WinXPPro w/sp3.

    Jim K.

    Hello

    1. What is the exact error message?
    2. don't you make changes on the computer before the show?
    3. What is the brand and model of the printer?
    4. this problem occurs with all files that contain the Active X objects or specific file?

    Method 1:
    Run the fix it and check.
    http://support.Microsoft.com/mats/printing_problems/en-us

    Method 2:
    Try the steps in the link and check.
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 3:

    This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

    a. Click Start and run, type regedit.exe, and then click OK.

    b. expand the following registry subkey:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

    (c) in the right pane, right-click 1200 and then click on edit.

    d. in the value data box, type 0. Then, click OK.

    e. close the registry editor.

  • HP Laser Jet MFP M127fn Pro: How to send a fax using speed dial?

    I have a new HP Laser Jet MFP M127fn Pro: how to send a fax using speed dial, I entered already numbers in the address book.

    I'm embarrassed to say that I spent several hours trying to get the speed dial to work on a M127fn.  It turns out that there really no speed dial.  That's the conclusion of at least a HP tech that actually used the machine.  Another tech was able to describe a way to fax a phonebook entry, but it is quite too complicated to be called a speed dial.

    [1] press the button settings (key).

    [2] press the right arrow to access the phone book.

    [3] press OK button.

    [4] use the right or left buttons to reach the desired phone book entry.

    [5] press the OK button to reveal the label for the entry, or "empty" if it is not set.

    [6] press the OK button if the element is set to display the fax or dialing options.

    [7] press FAX to initiate a fax to this phone book entry.

    My users find it much easier to have their phone numbers pasted on the machine where they can connect looking them to instead scroll through menus, for the right option.

    It seems that there is some sort of disconnect between hardware, firmware, and technical writers on this machine, because this ancient feature has been neglected, and the user guide is left to sputter on the issue.

  • I moved my HP Office Jet printer on my desktop and am not able to work with it now. Help me - what can I do to get it back on my list of printers Control Panel?

    I moved my HP Office Jet printer on my desktop and am not able to work with it now. Help me - what can I do to get it back on my list of printers Control Panel.

    Hi Liz L,.

    You can try to run the printer Troubleshooter and check.

    Printer in Windows problems

    You can also check out the following link to add the printer.

    Add or remove a printer

    Hope this information is useful.

  • HP Office Jet, printer all in one

    Cannot send a fax from my HP printer online. CD Rom is used for Windows 98, 2000, XP.  I have a Vista computer. It's all functions correctly except the fax.
    Need help

    Hi Josiebrown,

    (a) since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

    (b) that you get specific error messages when sending a fax?

    (c) you have set up your computer to send and receive faxes?

    Step 1: first of all, install your computer to send and receive faxes, to do this, follow the steps mentioned in the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-computer-to-send-and-receive-faxes

    Step 2: You can follow the steps mentioned in the link below:

    Solve fax problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems

    You can also follow the steps in the HP link below:

    http://tinyurl.com/yhqkc6s

    Step 3: It is recommended to have the latest drivers for the device to use all the features of this one so make sure you have the latest drivers installed on the computer for your HP Office Jet printer all in one. See the link below

    http://welcome.HP.com/country/us/en/support.html

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • DeskJet 2544: I have a macbook pro and I can't get my 2544 HP desk jet printer to print in color

    I have a macbook pro and I can't get my 2544 HP desk jet printer to print in color. I have os 10.9.5. My printer will copy in color but not print

    Hello

    Welcome to the forums!

    I read your post about how you seem to not be able to print in color on your Mac running the Mavericks, to your Deskjet 2544. I think that the base driver, or the driver AirPrint may be selected that could be the reason for having the option to print in black ink only.

    Here are the steps I would suggest for you:

    1. Reset the printing system
    2. Repair disk permissions
    3. Restart the Mac.
    4. Download and install the full functionality driver: 2540 Deskjet HP all-in-One Printer series full feature software and drivers

    You should now have the option to print in color.

    Good luck

  • Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?

    Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?  Almost everytime I try to print to the printer HP Office Jet m I get the Blue Screen of Death in the middle of printing or shortly after that my document is printed.  I then have to shut down my computer and restart it.  I am running Windows 7.

    We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.


    Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

    If you have any questions regarding the procedure, please ask

  • OfficeJet Pro L7590 can print but not scan

    My printer (Officejet Pro L7590) can print and copy correctly, but the scan function - that has worked well at the same time - has just up and stop working, and my attempts to solve the problem simply go round.

    • When I try to scan using the button start scan on the printer, I get an error message saying 'no scan options '.
    • When I try to open the solution Center, it is said that he cannot run because the installation is not complete.
    • Uninstalling and reinstalling the software (latest version, which is three years, downloaded from the HP website) do not work. The software seems to go through the process of installation very well, but crashes on the stage finish ("product configuration"). Eventually it times out.
    • Once in this case, the installer downloads a supposed solution of the HP Web site. He told me that it is fixing the problem and asks me to restart the computer, saying it will continue after the restart. After I restart, the procedure does not continue, and the problem is not fixed - all the behaviors I describe above are still occurring.
    • Also downloaded one file with other solutions supposed to this question. They do not work. For the most part, they are variations on "run the setup software again", preceded by various other measures. However, when I do this, it re-not installing - it is a completely different window, and if I try to go back to the installation procedure, he refuses, telling me the software is already installed. (And yet when I try to open the solution Center, he always tells me it is not installed.)
    • Tonight is the third time I tried to troubleshoot it. On three occasions, I just gave up in frustration after a few variations of the cover above.
    • I'm this end =><= to="" going="" all="" office="" space="" on="" this="" printer="" and="" getting="" a="" new="" one="" based="" on="" the="" abhp="" principle="" -="">Anything But HP.

    I can't emphasize enough that it worked in the past and this basis still printing very well (with the exception of some strange problems with certain PDF files), but scanning has broken since my last round of hardware upgrades and refuses to be fixed.

    It's incredibly frustrating. Someone just make it work with minimal BS, as he has done before.

    I realize, this is a follow up very, very late, but apparently the problem has something to do with the 32-bit version of Windows 7 running. I recently installed the 64 bit version and now have no problem with any HP software.

    Well, except that sometimes he asked my permission to do an update then fails to actually download the update (I get the same "could not connect to content url" error message that many others reported here).

    Other than that, which is slightly annoying, but doesn't really affect what anyone, everything works fine now.

  • OfficeJet Pro 8620: officejet pro will not automatically print incoming faxes &amp; answer

    I have a brand new Pro of Officejet 8620.   When I receive incoming faxes, I must be at the printer to press the ACCEPT button on the LCD screen.  I put the printer/fax AUTO ANSWER.    It did not work.  Any suggestions on how to have the unit automaticlly answer & print incoming faxes without having to be in the machine when machiines phone line rings.   I put the machine to meet Telec.  It is not set to meet incoming voice communication.

    Thank you for your informative reply!  PROBLEM SOLVED.  I was able to access the HP phone support people yesterday afternoon.  They very kindly put me through many of the steps you mentioned, that didn't work.  Finally the second support officer who got me the steps I have press the RESET button in THE SETTINGS on the LCD screen by DEFAULT and immediately after this step, solved the problem.

    My suspicion is that the machine, although that brand new, was in fact a refurbished machine sent to me by HP to replace the original purchase, which had a LCD screen showing only Chinese language that could not be changed.

    The replacement machine probably had been implemented at the different use of mine.

    Thanks to the lady who finally suggested hit the RESET button to THE DEFAULT SETTINGS as well as other people who responded!

    Everything is fine!      Aaron

  • MacBook Pro C310 series printer issues. I already had my C310 installed on a PC.

    I uninstalled and installed on my macbook pro.  I can print a diagnostic page, but it won't let me print anything else.  It is said that here it does not connect - almost as if there are problems with the router which I know is not the issue, as I got it all working before and my internet connection works.

    Can you help me at all?

    OK, if the test shows that it is correctly connected to your wireless network (I think that's what you say), then you just need to tell your Mac is here:

    -In the Apple menu, go to System Preferences > print and fax

    -Click the '+' at the bottom of the printer list (or if you have no printer listed, at the bottom of the large white rectangle).

    -When it detects your printer (with Hello appearing next to it), click on it once, then click 'Add '.

    Now you should be able to print or scan from your C310!  To scan using the image transfer application in your Applications folder.

  • My HP Officejet Pro 8600 cannot print from my MacBook Air

    Hello

    My HP Officejet Pro 8600 cannot print from my MacBook Air. It keeps on showing "the printer is not connected", but the display on the printer connected. I often reset the printer "EVERY TIME" I want to use. I also tried to turn off my laptop and printer several times before printing. If I'm lucky, it will work maybe for one or two prints. If no luck then I have to reset everything again. Sometimes I reset the printer, the printer is not displayed on my selection.

    Hello boojoo1tw,

    Welcome to the HP Forums!

    I understand that you are unable to print most of the time with your Officejet 8600. How is the printer connected? USB or wireless? What is your operating system on your Mac computer? Click here to find out.

    If your wireless printer, then I recommend the award of an 'IP address' by following this HP document on printer does not maintain the wireless connection.

    Please post your results, I'll be looking forward to hear from you.

Maybe you are looking for

  • How to stop Auto-start for videos

    Videos in Safari auto-start now. I would like to stop this function.

  • can I have multiple playlists on my ipod

    I have auto filled a playlist of my computer itunes for my ipod nano.  It worked, but I don't see the name of the playlist anywhere on the ipod.  I have all the songs and and also the cover of the album.  I can play songs by album, artist, genres, et

  • Printer will not connect to internet

    I have a Photosmart Premium all in one Web C309n printer, I have it on a wireless network. When I try to download apps from its touch screen, it can not find the internet connection. I tried with the ethernet cable and get the same results. I have th

  • Windows 7 64 - bit hotsync for Tungsten E2

    This infrared solution really worked well for E2 my wife with Windows 7 64-bit synchronization. 1. I installed Palm Desktop 6.2-> http://kb.palm.com/wps/portal/kb/common/article/32859_en.html 2. I have a USB to infrared adapter from Amazonyba SD-U1IR

  • Made me call from Microsoft

    Spooky or what! Earlier, while I was in the middle of writing a message on the Microsoft forums, I received a phone call on my landline to someone who says they were Microsoft Windows, and that they were calling on my computer (words to that effect),