Office Jet Pro 8600 can not connect the Web Service server.

Apparently, I need to enter a proxy address. Where can I find details of proxy? I use Windows 7 and I just installed the printer successfully (wireless)

Thanks in advance!


We are pursuing.

Next would be to put a static IP address on the printer.

To have the information needed to set the static IP address on the printer, press the right arrow on the front panel of the printer > installation > reports > network configuration.

B. open internet explore and type the IP address of the printer in the address bar, then press on enter.

The printer's built-in web server should pull up.

C. click on the network tab upward.
On the left side, click IPv4 on your connection type, wired or wireless.

D. change the IP from automatic to manual.
Enter the same IP address, the default gateway and the subnet mask.
Enter for the primary dns and secondary, then click on apply.

E. after is the button clicked apply to apply the static IP settings, enable Web Services.

Tags: HP Printers

Similar Questions

  • Office Jet Pro 8600 that printing of the iPad

    I am running Linux Ubuntu 12.04 LTS and have recently have not been able to print from it. My printer is the Office Jet Pro 8600, and on the first week I got it Setup print without problem. Now, I can only print from my iPad and when I try to print from my computer it says that it completed the work.

    Hello frashure11!

    About your problem, I suggest you check if you receive the internet signal or uninstall and reinstall your HP printing software again. The reason of why I tell you to do these is because when you try to print wireless, then you know how much you receive signals. For example, if you do not receive the maximum amount of the signal, then the chances are that printing occurs slowly. Sometimes, you can also try to uninstall the printer software and reinstall it again. But before you do that, re - check that your internet connection is to give a signal properly. I prefer lets you choose a password that has a security code, so that you can receive the maximum signal, somewhat, rather than having several people use it. Thus, your internet will go slowly and your impression will slow down.

    I hope this works!

  • Office jet Pro 8600: how to change the folder for the scans on my Apple?

    Hi, I want to know how to change the destination for my scans folder when I scan from the printer.  Currently, the scans go to "documents", and I want him to be in a business case.  Clues?  I tried to watch some instructions on the previous posts, but it seems that they are for windows.

    Thanks for the help!

    Hi @jgossc,

    I'd be happy to help you change your scan destination. I understand that when you scan your Officejet Pro 8600 to your Mac, the file analysis is currently underway to your documents and want to let them instead to a business case.

    To change the destination please follow the steps below and let me know the results of your efforts:

    • Open HP utility
    • Select Scan to the computer
    • Click Scan tasks to change
    • Choose a shortcut to scan
    • Select Edition
    • In the options listed here, you should see scan destination

    If this resolves the issue, please click Accept as Solution button below; If not, let me know and I will do everything I can to help. Thank you.

  • Office jet pro 8600 software not available for installation mac


    We are trying to install a jet of office pro on mac OS X 10.8.3 8600.   It keeps saying that the software is not available?

    I tried installation disc as well as the driver download from the internet.

    Hi hghlanderschool,

    I can't wait to hear that you have questions.  Can you send me a picture of the dialog box that fills the error.  Based on the information provided the procedure below can help solve the problem.  To learn more about your product, click here.

    A. remove all instances of the OJ8600 which is present in the applications software

    1 double-click on icon HD Mac desktop

    2. Click Applications, and then click folder Hewlett-Packard

    3. double click on uninstall HP

    4. click on continue when opens

    5 Select HP product to remove (OJ8600), then click on uninstall

    6. When prompted enter admin information (name of user and password)

    7. when the UI program uninstall is complete, drag all icons of the product to the trash

    8. return to the Applications and then click the Utilities folder

    9. double-click on activity monitor. Open the activity monitor

    10. under the name of process, click on any process that begins by HP, and then click on leave

    11. click on leave again.

    12. close the activity monitor

    13 empty the trash

    14 disconnect the product and then restart your computer

    B. reset the operating system printing system: NOTE: If OTHER PRINTERS ARE INSTALLED this WILL REMOVE THEM, if YOU DO NOT WANT that to HAPPEN please DO NOT COMPLETE THIS STEP

    1. choose System Preferences from the menu Apple .

    2. choose Print & Fax on the menu display .

    3 hold down the Option key while clicking on the "-" (deletion of printer). If no printer currently not added, hold down the CTRL key while clicking on the box that appears above the button "+" (add printer), and then choose Reset printing system... from the context menu.

    C. all software update:

    1. from the Apple menu, choose software update

    2 software Update checks the available updates. In the software update window, select the items you want to install, then click on install. Usually, you should install all available updates.

    3. Enter an administrator account name and password.

    4. when the installation is complete, restart the computer if necessary.


    D. reinstall printer with USB cable

    1. turn the printer and the computer

    2. connect the USB cable for printer

    3. USB connection to computer

    Note: this should automatically add the printer, if it does not manually add the TI-see below *.

    4. open system preferences, and then click Print & Fax

    5. click on the sign under component printer +.

    6. click on the name of the printer

    7. click on add

    8. test the functionality

    I hope this helps!



  • Wireless HP Office Jet Pro 8500 - can not scan to computer

    I use a HP Office Jet 8500 Wireless and cannot "scan to computer".  When I select "scan to computer", I get a message (on the face of the printer) that says "refer to device documentation to troubleshoot issues.   I did everything in the troubleshooting guide, even if they do not address my problem, but anything done without success.  I am running Windows 7.

    Any suggestions?  Thanks for the help!


    Destin, FL

    Hello Robin,.

    Thank you very much for your answers and your efforts! My sincerest apologies for not knowing that Windows 7 Professional 64 bit rested not with the tool! I learned something new from you and thank you so much for this!

    We can try level 3 or 4 uninstall manually, instead of running the tool. I understand that the tool would be the easiest method. Here are the steps for you.

    There are 2 ways you can run levels:

    Of the Original installation CD:

    1. Insert the CD in the drive and then cancel Setup

    2. open "Computer", and then right click on CD drive and open

    3 open the Util folder

    4 open the CCC folder

    5 If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. perform a clean boot

    9. run the download to reinstall the printer ( HP Officejet Pro Full Feature software and driver )

    If the software has been downloaded and extracted the download of the driver for your system:

    1. click on start and type %temp% in the search box, open the folder

    2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

    3 open the Util folder

    4 open the CCC folder

    5 If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. perform the clean boot

    (9 download drivers and full software features HP Officejet Pro Full Feature software and driver )

    I really hope that does the trick!

    Happy Thursday

  • Office Jet Pro 8600 N911g: San to the network folder

    With the help of:

    Office jet 8600Pro N911g

    10.11.5 OS

    Firmware: CKP1CN1545AR (just updated today, Firmware was just posted in the last few weeks)

    Print driver: 4.2.0 (just download today through 'HP Easy Start')

    "Trying to set up' Scan to network folder" and continue to receive "the connection failed". In the past I used SMBUp add on software to scan to folder with the older firmware. After trying all the configurations of the network path, which does not work and receiveing several different reasons does not connect, I turn on the SMBUp and it worked. Turned out and received "the connection failed".

    Installer for the scanning of network:

    Computer name: TGC-IMAC

    Network path: \\TGC-IMAC\HP-SCANS

    It works with SMBUp, but not when it is turned off.

    I tried to set up for a year without the use of SMBUp. I noticed today that the new firmare was available, and he said he would 'improve' Scan to network folder for several versions of the OS 10.

    What Miss me... bad etc.?

    HP you have to work on the development of the configuration software to search for the path to the computer, then 'user guide' in the folder he wants to use. The current guessing game and test has got to go.

    The user community has waited for YEARS for this correction, and now there doesn' t seem to work.

    Any suggestions or comments would be useful, especially from HP.

    Thank you, tom

    Problem solved...

    Came in this AM and I tried the test and it WORKED... The only thing that has changed is the computer and the printer have been turn off and started again. In addition, scanned a document in the affected folder.

  • Office Jet Pro 8600, how to install the full features of MAC OS x 10.8 software.

    Must be able to use all the features of SCANNING (double-sided), but can't seem to find a COMPLETE package of software for OS 10.8 Mountain Lion

    Hi labsinsc2003,

    You can download the SW of full functionality of your product in Lion mountain from the following link: Driver & Software Downloads - HP Officejet Pro 8600 Premium e-All-in-One - N911n

  • Can not get the web service works

    I get the following error message when you try to call ASP.NET web service on the same host.

    TypeError: Error #1034: has no Type constraint: cannot convert function-2010 in Namespace.
    to mx.rpc.wsdl::WSDL/::processNamespaces()
    to mx.rpc.wsdl::WSDL$iinit()
    to mx.rpc.wsdl::WSDLLoader/mx.rpc.wsdl:WSDLLoader::resultHandler()
    to mx.rpc::AbstractInvoker /
    to mx.rpc::AbstractInvoker /
    at mx.rpc::Responder/result()
    at mx.rpc::AsyncRequest/acknowledge()
    to: DirectHTTPMessageResponder / completeHandler)

    I use http://localhost/Hello/Service1.asmx?WSDL as the wsdl and it works when I browse it with the browser.

    Any help would be much appreciated.
    Thank you

    Got it... Finally!

    In my file I had a static method named Split(Array,delimiter). I added this because I didn't like the stock of String.Split implementation... ie you get nothing if the delimiter is not found in the string, I wanted an array containing a single element in this document, the original string.

    in any case... There was a conflict of names with the Split method in the SDK because as soon as I changed the name of the method of SplitMeUp it worked and I got no longer error when loading of the WSDL.

  • HP Office Jet Pro 8600 can that print you the attachments sent by e-mail

    Adverises e-print, but receives only the body of the e-mail message.  You are able to print the attachments?



    You can print the attachments, there are a few limitations (file type, size of the file, etc.)

    Review the saection FAQ below to better understand the features of service:

  • Office jet pro 8600 is not copy at the top of the document

    don't copy everything at the top of the document

    How you try to perform the copy? Of the bucket or the ADF?

    Have you tried to do a hard reset?
    * Unplug the unit while the printer is on
    Disconnect the other end of the power cord from the wall jack directly
    * Wait 30 seconds
    * Plug the unit back to the printer

    I would like to know how this happens.

  • HP Office jet Pro 8600 is not using ink magenta or yellow

    Recently, I've changed the ink cartridges black and cyan hp recommended but no real products. Since then, the machine only prints in cyan and black. I've now loaded with hp real poducts, nothing helps. I cleaned the printhead several times without success. I also powered down and disconnected the electrical installation.

    Thanks for your efforts, but it seems to me the print head.

    He has only 5000 printed pages so I'll see if I can get a new one under warranty

  • Office Jet Pro 8600: Print and scan the doctor

    Will be to print and scan doctor run on Windows 10?

    Hi Gardener2010,

    Yes, print and Scan Doctor is ready Win10!

  • How and where can I load legal size paper on the HP Office Jet Pro 8600 Plus?

    I have just purchsed the HP Office Jet Pro 8600 Plus and I wanted to print on legal size paper, but I can't figure out how to do this.  Can anyone help?

    There is a blue tab at the end of the paper tray.  That push and the plateau extends to the legal size.  Hope that helps.  Now what about this one: I want to charge 11 "legal in Tray 1 and tray 2 and, hopefully, the printer will know what bin to shoot when you print legal documents?

  • Trouble installing the software and the driver for Office Jet Pro 8600

    I get error that "additional software is necessary to continue' when I try to install the software and drivers for my wireless printer Office Jet Pro 8600. I just got a new laptop and had at first no parameter problem the printer and it prints fine, but now for some reason it is not print at all. I tried to restart my laptop and printer several times, but it keeps saying printer offline even if it is connected to my wireless. I followed the recommendation of an assignment that suggests to abolish the printer and reinstall, which is where I am now. Now, I can not install this printer at all by the above error message. Help, please!

    Thank you!

    Hi HSchulz,

    When you try to install with the CD, try installing the latest Windows 7 driver from the HP website. Restart the computer, turn off the printer, then reboot your router and then launch the installation. Here is a direct link to the driver file:

    Select the connection Wireless option during installation to get the printer on the network and associated with the laptop. Let me know if this helped at all...

    I work on behalf of HP.

  • Office Jet Pro 8600: office jet pro 8600 clear the display

    I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools...  It isn't that I know where they are and who's who for the most part.

    In addition, scanning is not clear.  Everything is faded.  However, it still prints and faxes by a fine.  I hope I don't have to buy a new All In One Printer.  I finally got most of the glitches and tricks when I have a problem with it.  Is it possible that there is a light bulb needs to be changed or something?  I appreciate your help & feed back as soon as possible.  I use in an office on a daily basis.

    Kind regards


    Hey @mere4340,

    Welcome to the Forums of HP's Support.

    I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

    If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

    Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

Maybe you are looking for

  • Satellite A200 and Windows 7 64 bit - how someone test it?

    Someone has test and works with it.I * A200 23W * with 4 GB of memory, vista sp2 installed and I want to have a clear installation * windows 7 but the 64-bit version *. What do you think?

  • my playlists will not be synchronized between my mac and my iPhone

    I use iTunes game, but I can't get my playlists to sync on my iPhone with my mac 6s. I tried to disable iTunes match and I'm still not having any luck.

  • two questions about Rockbox

    Hi all...        I installed Rockbox on my v1 rocket, but there are two strange things going on: first, when I jump to the next song or previous Rockbox takes about 2 seconds to change... Is this normal? In fact, since I installed it, when I plug in

  • change the color of the current date af:inputDate

    Dear experts,I have demands to change the color of a specific date in af:inputDate, but I can't find a way to change the date of the day color (04/09/205-JJ/MM/AAAA). Do you have any suggestions?I want the 09/04/2015 also green.Thank youRicky

  • SDHC memory

    A 8 GB SDHC memory card work in a Treo 680?