Office Jet Pro 8600 more: cannot download software on computer

Similar Questions

• HP Office Jet Pro 8600 thus: Office Jet Pro 8600 more

  I have a problem recently set at the point to save a scanned image.  My HP Office Jet Pro 8600 more communicates very well with my MacPro conputer but save him as option is grayed out.  I tried savving in jpg or pdf, but grayed out now.  I don't know how this some.  I had the sytem for a few years and am just now finding this problem.  I wonder for a prefix (I remember this, but...) and no matter what I enter here the Save as button remains greyed out.

  

  It works if I choose 'print' scanned image print and then saved as a pdf.

  I tried everything turning on and off.  The scanner is connected to the wireless computer.

  Any help will be appreciated.

  Hello

  Thank you for using the HP Forums.

  Have you installed the HP Easy Scan software?

  If you do not, we recommend that do you so and use the analysis of the HP.

  Let us know if it works (what you are able to save your work) after you use the HP Easy Scan.

  Thank you.

• How to print envelopes and labels on an Office Jet Pro 8600 more all-in-one

  Envelopes and labels can be printed using the paper on top of the Office Jet Pro 8600 more printer all-in-one?

  If printing envelopes the lower tray, should I remove the paper from the tray and adjust the margns?

  cor21911,

  You are not able to print labels or envelopes of the ADF, for copying or scanning only. Also, it is not necessary to remove the regular printer paper to print on these types of media, even if it can make it a little easier. All you have to do is go to word or any other type of program allows you to print and select the appropriate model label or envelope and follow the instructions.

  Let me know if you need additional assistance.

• Office jet pro 8600 more engine error message "pick staple.

  I don't know what it is?

  Remove paper tray and check if there are pieces of paper coming out or folded in the 8600.

• Office jet pro 8600 more: Office jet pro 8600 not available in wired networks and wireless

  Have a 8600 JO Plus (CM750A) (N911G), he worked on the wired connection with a static IP address. Then one day she stopped communicating on the cable network. Don't reset to the default values, but still no connection, no activity lights on the connection on the printer's ethernet port. Configure to use the wireless connection. He worked for a while, and then he stopped too much work, could not see it on the wireless network. Reset to the factory settings, yet could not set the wireless connection. She see the SSID of the wireless and allow to enter the password, but would not connect to the wireless network. Now cable and wireless connectivity will not work. I think that the network adapter is broken. What is the OPINION of the Committee of the network so I can order a new one? Connected to USB at the moment and may have a printing station. So OK for now but need a new Board of Directors network. Or any other suggestions on how to connect to wired or wireless. I set factory defaults may times and set a static wired network IP address (which does not stick).

  Hey @John-G1,.

  Welcome to the Forums of HP Support!

  I understand that you are looking for a replacement of the network card for your Officejet 8600 Plus e-All-In-One Printer. It is not a replaceable part. However, if you contact HP support by clicking on this link you can discuss options based on your printer warranty.

  If you appreciate my help, please click on the thumbs up icon. If phone support is able to provide you with any resolution, click on accept solution. The two icons are located below this post.

• Office jet pro 8600 more: my 8600 pro officer isn't printing, help

  Can Hi anyone help?

  Hello

  Thank you for using the HP forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• Office Jet Pro 8600 more - how to avoid the incoming faxes to print? Win 7

  I want faxes to store only on my computer. Where can I find the "cookie cutter" oumayma option after installing the software?

  Hello

  Sorry this feature works only when the printer is connected to a network (wired or wireless).

• HP Office Jet Pro 8600 more. Do not print on the internet

  Hi all

  Today, my printer decided to "throw up" an ontop empty page of the Web page, I tried to print.

  I asked the printer in the right hand mouse button menu drop-down, then 'print '.

  Then the white page appears. You can check the internet on the edges.

  Print my docs and photos.

  Maybe I have changed something in the settings of this morning, but I don't remember what I did?

  Someone at - it ideas? I hope so. Thanks Redocean

  Hi @Redocean

  I might be able to help him, but it's not really something HP is supported. I found a video that asks you to remove Softonic, as well as a link with the following instructions to help you reset Internet Explorer. I think that might help.

• Office jet pro 8600 more: printer code request

  I do not know and can not find my printers code application so I can add to my connected hp account and change his email address so I can print from my carrier wireless 4G LTE network.

  Hello

  It is a series of questions. Still, you need to connect to the internet first until you can get a claim code.

  No link, no code claim.

  Have back to your other post, you managed to get it to connect to the internet? It is much easier to follow when using a post rather than spread around many messages.

  Kind regards.

• Office Jet Pro 8600 Plus scanning issues

  I had my Office Jet Pro 8600 more for a few months and have been scanning a pretty good volume without problems.  Now, I have what I believe to be a their material.  That's the problem.  I'm getting random LARGE band (broad sense) about 1/2 to 3/4 inch of black, gray, or white streaks down the pages.  I had the problem of cleaning so I cleaned everything, always there, but not every time.  So I raised the lid and set the paper on the glass, guess what still there.  So now I know that it is NOT a problem of cleaning.  Switch papers, always there.  Is not a problem of cleaning, not a charger problems, not paper I'm scanning.  At this point, the only thing I can think is that some of the scanning light is on the fritz.  It seems to do better after a rest and as I said it comes and goes.  Any ideas anyone?   I think that this could be a problem of default.  Please let me know.

  Hey Boefixepa,

  If the printer is to give you a black line when scanning/copying with the ADF and flat, then I would hazard a guess that the printer is connected to a surge protector.  If so, then try the following steps.

  * Unplug the printer while on

  Disconnect the other end of the power cord from the surge protector

  * Wait 60 seconds

  * Plug the printer back to power on a direct outlet

  The 8600 does not need to have a surge between her protector and the wall unit has protection against overvoltages, built in.  Being doubled surge protection can sometimes cause this type of line to appear using the 8600.  I hope this helps.

• HP Office Jet Pro 8600 series vacuum software disk

  HP Officejet Pro 8600 print/fax/scan/copy/web; Model: SNPRC-1101-01; FPU: CM749-64001; S/N: [redacted].

  I use the operating system is Windows 7 on an AMD FX (tm) - 6100 Six Core CPU 3.3 GHz, 8 GB RAM, 64-bit operating system.

  I've not seen this topic. I searched on the site of HP.

  Description of the problem:

  Just bought a HP Office Jet Pro 8600 printer. Time to install the software, but I had a Virgin software disk. What software should I download: drivers of course... what else?

  Hello, welcome to the forums!

  I saw your post about requiring the software and the driver for your Windows 7 system and your Officejet 8600. If you use the printer HP install wizard for Windows, which will search for the drivers and the software you need and will run the installation for you. You will not need all a disc.

  I hope that helps! Response please that if you have problems, I will gladly help you!

• Trouble installing the software and the driver for Office Jet Pro 8600

  I get error that "additional software is necessary to continue' when I try to install the software and drivers for my wireless printer Office Jet Pro 8600. I just got a new laptop and had at first no parameter problem the printer and it prints fine, but now for some reason it is not print at all. I tried to restart my laptop and printer several times, but it keeps saying printer offline even if it is connected to my wireless. I followed the recommendation of an assignment that suggests to abolish the printer and reinstall, which is where I am now. Now, I can not install this printer at all by the above error message. Help, please!

  Thank you!

  Hi HSchulz,

  When you try to install with the CD, try installing the latest Windows 7 driver from the HP website. Restart the computer, turn off the printer, then reboot your router and then launch the installation. Here is a direct link to the driver file:

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Select the connection Wireless option during installation to get the printer on the network and associated with the laptop. Let me know if this helped at all...

  I work on behalf of HP.

• Pavilion Intel Core i3 8 GB of RAM: How can I get my HP Office Jet Pro 8600 printer to work using Windows 10?

  With the help of a Microsoft Windows 10 w / a HP Office Jet Pro 8600. How can I get the printer to operate windows 10?

  Hello

  Please download the software package and the following driver and install on your computer (s) 10 of Windows:

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Kind regards.

• HP Office Jet Pro 8600: Error Message: Scan in use - wait until the job is done

  Have used my scan function without problem since the purchase of machine and one year on Microsoft Windows 10.  Last week I did some scans - now this week when I try to use my scan function I get the following error message: Scanner is busy.  The scanner is currently in use.  Wait until your previous task is completed, and then try to scan the image.

  -There is no unfinished business and I can't find anywhere to clear the error or erase any task the scanner thinks he's working on.  Has anyone met and solved this problem?

  Thanks in advance for any help you can provide!

  ritao

  Hello

  Thank you for using the HP forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  If this does not work, you need to maybe uninstall and reinstall the software COMPLETE features:

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/identify?q=+HP+Office+Jet+Pro+8600&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Before you download, choose the right model, the operating system and complete software functionality.

  2 uninstall the software from your computer
  3. install the FULL feature software "saved".

  Here are some resources for you scan:

  Quick Guide for scanning needs

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quick-guide-to-your-scanning-needs/m-p/5625126

  Hope that helps!

• How to scan using your HP Office Jet Pro 8600

  Well, I got my answer because I could not find a topic 'resolved' in this regard. So I decided to post my findings to help the next interrogator (is that a word = the one interviewing). FYI - I am not a "geek", and while I can find my way around a computer it sometimes takes a while.  Also, I have Windows 7 on this laptop if it makes a difference.

  1. go to control panel and choose:

  2. material and audio, then

  3 devices and printers, then

  4 fax - HP Office Jet Pro 8600 (network) or whatever printer choice applies to your situation, then

  5 HP Printer Wizard, then

  6 scanner activities, then

  7. analyze a document or a picture, then

  8. Save as PDF

  9 scan

  10. save in a folder you choose

  I know this may seem simplistic to most of you, but maybe someone like me is out there, trying to find this out and this could help.

  Roxi

  Hello Acupuncture,

  Thank you for posting your solution you found yourself, on the use of the scanning function on your HP OfficeJet Pro 8600. I apologize as we were not fast enough to answer one of your questions on the Forums of HP Support. I've been able to check your user page but could not find your original post on us asking how Scan, did you remove the question? Anyway I'm glad you are now to the top and scanning of your JO 8600.

  For later use, I would like to you to take a look here: how Scan: Windows 7, here we will give all the options and shortcuts on scanning with or without the HP software as well as a few cool features, like the scan from the front panel of your 8600 and adding several pages in a single file.

  Yet once I thank you for taking the time to help other members of the community, so thank you once again!