Similar Questions

• Laer jet pritner p4015n support windows Server 2008

  Laer p4015n pritner jet does support the operating system windows Server 2008 32-bit & 64-bit?

  Hello

  You can download the Windows 2008 64 bit below PCL6 driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3558793&prodNameId=3558794&swEnvOID=4024&swLang=8&mode=2&taskId=135&swItem=hv-60187-5

  Kind regards

  Shlomi

• Office locks upwards and not Windows Server 2008 R2 remote let me reconnect

  I was having problems connecting to a remote system with RDP.  The server is operational for several years and is one of the 4 servers identical servers located on the same site.  Recently, one of the other servers crashed I was remoting in a long time so I had to start using this RDP server in.  Once our on-site personnel COMPUTER redirected to this NAT. port forwarding by server, I was able to connect remotely to make some changes, including the addition of a role as a remote access server VPN using the Routing and remote access Server Setup Wizard and removing the component of protection against threats Symantec Endpoint Protection network so that I can use and configure the Windows Firewall.

  While working through the Routing and remote access Server Setup Wizard, my locked up and disconnected RDP session.  I was able to reconnect once on-site staff completed the wizard and restart the computer, but once I reconnected it, after a minute or 2 I was even once disconnected and could reconnect not until the server has been restarted.  I presume that add the VPN role affected my RDP access and decided to remove the VPN server role.

  Now, I can't RDP on the server unless it is freshly reset, and even then it only allows me to stay connected for a few minutes before the connection is lost and I can't reconnect again until the server is restarted.  A vicious circle; power of connection after restart, only to have the connection dropped and requires a restart to reconnect again.

  This server also hosts a database that client systems are able to access for a short period of time after before restarting their connection drops.

  I quadruple checked the inbound Windows Firewall rules, uninstalled application anti-virus completely, same goes for as much as duty get their request for removal to ensure each piece of it has been removed, and I always have the same question.

  The whole issue started when I tried to add the VPN role.  I can't uninstall and then reinstall the anti-virus repeatedly has not helped either, but as it is right now, I have a server who, shortly after the restart, is unable to communicate. not with the internet, not on the local network, not remotely.   On-site staff are trying their best to follow my troubleshooting over the phone, but he arrived at a point where I will have to find out what's wrong and provide an easy solution to remote, or make a trip to halfway around the world to try to figure it out myself (which would be EXTREMELY difficult/close to impossible right now).

  Quesitons:

  (1) why would I be able to connect to remote after the reboot and disconnected then shortly after? (Service/application causing the problem didn't start until shortly after a restart?)

  (2) why is it not only kill remote access, but access LAN and internet on the server?

  (3) what else can be verified to help diagnose and fix the problem?

  I did a lot of research on the web but haven't found identical to mine problems.  Is this a new problem or a bug?  I saw information about uninstalling a patch and a seen a fix for the problems of the RDP, but who wouldn't even help LAN and access on the internet server.  This server ran local client local RDP, access to the database access and could have access to the internet for the years leading up to the recent changes and issues.

  Edit: The pro I'm remote on the server is a system Win 7 Pro, and the database of customers are also Win 7 Pro.

  Correction of the problem.  Turns everything by making the configuration for VPN, incorrect information has been entered in the network link, causing the network to the bomb once VPN service started.

  There are several LAN ports on the server, and one of them was selected incorrectly and configured with the incorrect gateway IP address during configuration of the VPN server.  Once the misconfigured for the LAN port TCP/IP parameters have been removed, all was good again.

• Adobe Premier Pro will run on Windows Server 2008 or 2012

  Adobe Premier Pro can run Windows Server 2008 or 2012

  Hi Paul,.

  Please check the system requirements for the link.

  System requirements | Adobe Premiere Pro

  Kind regards

  Vinay

• Can I downgrade my Satellite Pro P200 for Windows XP?

  Hello

  I bought my Satellite Pro P200 (PSPB7E) a week ago and I love it. I have an unused XP license, so I would like to downgrade.

  Is this problem? I don't see xp for a Chicony webcam drivers or the HD-DVD player.
  I'd really appreciate some feedback. There must be someone out there who has tried to do.

  Thank you in advance!

  Hello

  Of course you can downgrade the satellite Pro P200 for Windows XP.

  When installing XP, you need to install the Intel Storage Manager. It is a SATA driver that is needed to activate the HARD disk.

  Regarding the webcam driver.
  I checked the page European driver of Toshiba and the Chicony webcam driver is certainly available.

  The HD DVD driver is not necessary because the Windows XP must use an own ODD driver.

  See you soon

• How to install Windows 8 Pro cd image in the Windows Deployment Services on the 32-bit version of Windows Server 2008?

  Hello.

  I wanted to ask you for example in Windows Server 2008 32-bit when there are Windows Deployment Service. From there you can add images and then you can install windows on the network. So I wanted to try to do it with the cd Windows 8 Pro where I but I couldn't do that because in the catalog of Sources, I find "install.esd" not "install.wim" how the server or service request, with the cd of Windows 7 you can do, but you can't do that with windows 8 Pro I have buyed haved. I want to try to do this with Windows 8 Pro cd on the network because I have 3 pc at home with Windows 8 Pro and I wanted to try out the service deployment with windows 8 when I need to install pc so I prefer to install it on the network not on cd or etc. P.S. for all PCs with windows 8 pro I have buyed them, I have license key and etc.

  I use the 32-bit version of Windows Server 2008 in thw.

  Hello

  You can view this issue in this help link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• I tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan. Printer model: HP 3390 Laser jet

  tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan.
  Printer model: HP 3390 Laser jet

  I don't want the drivers.  I mean the software.  The drivers you get from the page server 2003 and the software from the page I referenced.   Otherwise, you need to contact HP, as they provide that software, not Microsoft.

  Steve

• Windows Server 2008 OS is not acceptable for Officejet Pro 8500 has more

  I am installing an Officejet Pro 8500 has more on a network that contains just a Windows Server 2008 R2 (64-bit) computer and a bunch of zero clients.  I read the document "installation of the software of the printer on Windows Server 2003 or 2008" including the updated title hope in my heart.  Unfortunately when I followed the instructions to install from a. MSI file, I get an error message saying "this computer's operating system is not supported", as can be seen in

  https://www.dropbox.com/s/oi3ur31frg8dhi3/HP%20error%20via%20MSI.PNG

  I am able to print to this device I have widower of drivers from Microsoft Update, but I want to be able to scan with it.

  I solved this problem by installing the complete package on a Vista laptop then set up a network folder on the server for the scanned images.  I then unplugged the laptop from the LAN and now I can scan using the front panel of the printer/scanner and images appear on the shared folder of Server 2008.

• When I download the Microsoft digital media pro keyboard for Windows 7, I can configure the Dell are no longer wired mouse.

  Original title: Digital Media Pro Software for Windows 7 & mouse

  I have recently upgraded to Windows 7, 64 bit.  I got a Microsoft digital media pro keyboard and a Dell wired mouse.  When I download the driver of keyboard for 7, I can configure is no longer my mouse.  The system seems to think I have a Microsoft mouse and sends me to the page of the keyboard layout.  Unfortunately, there is no option of configuration of the mouse on this page, and I can't change the functions of the buttons.  Since I use
  left mouse, it's a pain.  I had to uninstall the keyboard software.  Any suggestions?

  Go to the download site and download IntelliType 8.2 64-bit for Windows 7

  It's only for the keyboard.

  Do not use the mouse and keyboard Center 2.1 64-bit

  http://www.Microsoft.com/hardware/en-us/d/digital-media-Pro-keyboard

• Our tech tried to install the product to a college and was denied - Adobe Acrobat Pro DC for Windows - student and teacher

  Our tech tried to install two 2 licenses of Adobe Acrobat Pro DC for Windows - student and teacher of a private college in Yonkers - on two different machines.  He had been denied.  We have the keys.

  The College is indeed a ' private university or college "and not the right to this software?
  
  According to the academic policy of Adobe page:
  http://www.adobe.com/education/educators/how-to-buy-eligibility.edu.html?

  "To be eligible for a discount, you must be one of the following numbers:
  • Faculty or staff - employee by an accredited primary or secondary school, public or private university or college, school district or School Board (including Emeritus professors) *.
  • The teacher to a student attending home - defined by the regulations of State homeschooling. "
  
  "* Accredited schools are those that are approved by an association recognized by the U.S. Department of Education / State Board of Education or Canadian and provincial education departments and teach as their main objective." In the United States, these associations include: Middle States Association of Colleges and schools, North Central Association of universities and schools, Western Association of Schools and colleges, Southern Association of Colleges and schools, New England Association of Schools and colleges, the Association of accredited of the Northwest schools. »

  
  

  Thank you.
  

  Request student/teacher discount

  http://www.Adobe.com/go/edu_verify_ecomm_us

• I have a Windows Server 2008 R2 system. I use Adobe Acrobat Pro XI. I'm looking for the place where I can change the default font of Calibri Minion Pro? Tools, content editing, formatting

  I have a Windows Server 2008 R2 system. I use Adobe Acrobat Pro XI. I'm looking for the place where I can change the default Miinion Pro to Calibri font?

  Tools, content editing, formatting

  You can't change it.

  Tuesday, January 13, 2015 11:22, tonywaidmann [email protected]>

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

  Cannot find a driver for the Officejet Pro 8500 on Windows 10

  Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

  Reinstall the driver of windows 8.

• HP Pavilion 15-ak085na: could not find the WiDi WiDi/Pro Intel® for Windows software

  Hello

  When I install the "Intel® WiDi/Pro WiDi Software for Windows" software downloaded from https://downloadcenter.intel.com/download/25153/Intel-WiDi-Pro-WiDi-Software-for-Windows , he said:

  

  While they inspected the processor competebility intel I can see that it supports the wireless display.

  Can you please help me to be confirming that my dosent computer laptop 'HP Pavilion 15-ak085na' have support for wireless display or point me in the right direction to download the software.

  Thank you very much

  Youssouf

  Hello:

  You need a PC with an Intel HD graphics card that meets the specifications of widi

  You need a PC with an Intel processor that meets the specifications of widi

  You need an Intel wireless network adapter that meets the specifications of widi.

  Your PC should have all 3 of these items to run Intel Widi.

• OfficeJet pro 8600 installation in windows server 2008

  Hello

  Having a problem getting the 64-bit driver provided by HP on our Server 2008 standard R2 x 64.

  Tried the execution from the command-line as well, but no joy. Error page appears saying that it is evil

  Operating system or something like that. Confirmed driver and the OS game, but always fails.

  Also contacted HP, but which turned into a trainwreck as usual. They think that non-English

  speaking of people can really help in such things... Great frustration.

  Any help would be greatly appreciated.

  Hi Chicagovince,

  Follow the steps outlined in the document below to install the printer on the server.

  This document provides information on customizing the installation of HP Officejet and Officejet Pro printers of company directors. It includes how to select a printer, what features and drivers are installed and how to deploy the printer on the computer targets using a script to control the installation process. It also includes instructions for the reduction of the size of the deployed package, information about the system requirements of firewall and other technical details.