Office jet Pro 8630: printer storage for 18 months

We are about to travel for 18 months and want to store our printer then out.  I have the original box and packaging ploystyrene, if you want some advice on reconditioning safely - I can find help for printers smaller, but not the 8630.  Also, should I remove the ink cartridges.  Assistance would be most appreciated John

The cartridges should be stored in the printer.  Be sure to turn off the printer's power switch and let the printer to get things "parked" before unplugging the printer.  Store the printer in a place not subject to significant fluctuations of temperature.  I wouldn't put the printer in its original packing, if you don't do that you keep the printer oriented as it would be on a desk - the package has a normal orientation which has the printer on its side, this should be avoided as the ink of the service area may elapse.  If the printer is going into a storage facility you can put in its original packaging, but make sure the printer 'flat '.

I had an extra Officejet 8600 more (same inks and printheads as yours) that I implemented, then set aside for a full year.  I was surprised, but the first impression after decommissioning storage printed without needing any fussing in all - no manual cleaning or running cleaning cycles not needed.  I was actually expecting that I would need to run a few cycles of cleaning of the façade, or perhaps even remove the printhead and soak.  I had the printer stored in a spare room, protected from the Sun and away from heating vents.

Tags: HP Printers

Similar Questions

  • Pavilion Intel Core i3 8 GB of RAM: How can I get my HP Office Jet Pro 8600 printer to work using Windows 10?

    With the help of a Microsoft Windows 10 w / a HP Office Jet Pro 8600. How can I get the printer to operate windows 10?

    Hello

    Please download the software package and the following driver and install on your computer (s) 10 of Windows:

    http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

    Kind regards.

  • HP Office Jet Pro 8630: JO 8630 Pro and HP Solution Center work together

    I had a HP Photo Smart C7280 that crashed. I replaced it with this 8630 Pro JO from HP and HP Solution Center software does not take account of the new printer after that the online setup process was completed. I used the software regularly and I would use it in the new printer as well.

    Hello

    HP Solusion Center software has been replaced by the most recent model HP Printer Wizard, it is not affiliated with the 8630 anyway.

    You can access the wizard in the HP printer by opening the software HP Officejet Pro 8630 from your desktop or in the start menu > programs > HP, open the folder that is listed as the printer model and then click the printer model icon.

    Kind regards
    Shlomi

  • HP OFFICE JET PRO 8610: printing problem HP OFFICE JET PRO 8610

    I have a problem with HP officejet Pro 8610 print, it prints very slow and then it stop in the middle and then print again after 3-5 seconds, it is very time consuming. I've known this for 2 weeks and this printer is brand new as 2 weeks of age. I tried to reinstall it 3 x already. I use a wireless connection to the printer, but even if you use a usb cable I still encounter this problem. Please help me with this printer.

    Hey @FICONT,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with your PC of Windows 8.1 slow printing to your Officejet Pro 8610 e-all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once this is done, please let me know if you still have problems slow printing.

    Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Office Jet Pro 8000 print quality is poor on glossy or matte paper.

    My printer is 2 years old.  Glossy is the verticals a (drum lines?) and greased and never heals.  On matte paper, it is dull and lack of color.  I tried a lot of papers.  Is this a problem of printer or paper?  If it's a problem of paper what paper should I use?  I need to print photos for my work to show to customers within a short period of time.

    About the default settings, can you go to print and the following information:

    Default paper Type/media type:

    Default paper size/media format:

    Print quality (Normal/best/best):

    Normally, if you do not specify at least the type of paper, the printer thinks it's printing on plain paper. The delivery of the ink is different for each different type of media.

    Try to adjust this setting and see if printing comes out better. If it (the problem) you can make a shipped printer scheduled for these parameters, so that whenever you print on paper (insert type/manufacturer of paper here), you can use the preset for auto-set the driver accordingly.

  • Office Jet Pro 8600 - Print web page in pdf

    Recently purchased jet Office pro 8600 (previously had 6500), how do I configure to print a web page in pdf format. The 6500 enabled you to set up a printer, similar to the fax printer. Windows 8 operating system

    zGal wrote:

    .... The 6500 enabled you to set up a printer, similar to the fax printer. Windows 8 operating system

    Hello

    No not the printer, he came from a kind of products PDF writer. They are many around as a very popular product called pdf24. You can download this free software from the following link. You can use pdf24 to edit pdf files too. :

    http://en.pdf24.org/pdf-editor.jsp

    Kind regards.

  • Office jet pro 8610: printing from ipad to office jet pro 8610

    Just got a new printer, how do I set up printing via my apple ipad

    DebbieCrane

    Welcome to the Community Forum of HP.

    Congratulations on your new HP printer!

    You must perform the following steps:

    • Install your printer on your home network (front panel of the printer) and / or install the full functionality for the printer software (which is the printer on the network).
    • Follow the basic instructions to set up ePrint and print your claim record (web services) - paper should have come with your printer, or you can make the printer print a new document with the information
    • create an HP account connected to be able to talk to the e-mail address of your ePrint printer settings (and make changes to your ePrint settings)
    • set up "an App for that" on your iPad so it can send jobs to the printer

    It seems more difficult than it is.  The smile.

    Have a look here:

    Add the printer device

    Click on the Thumbs - Up Kudos to show that you appreciate the help.

    Click on accept as Solution when the answer provides a fix or a workaround!

    I am happy to provide assistance on behalf of HP. I do not work for HP.

  • 8630: connecting the new HP Office Jet Pro 8630

    I work for a local phone company and have a customer who bought a new 8630 and they the line us to send faxes, voice & voicemail if voice calls going unanswered at present. If we use the 1-line port and take the 2-ext port in the phone makes the 8630 fax detection is received the fax or send on ext 2, if voice calls?

    Hi @GStebens,

    Yes, that's correct. But with voice messages put in place it doesn't detect faxes unless you get setup distinctive ring on the line.

    Thank you!

  • Office jet pro 8630: Office jet pro 6890.

    The problem is: the printer will not copy.  I hit the copy function and I get a beep and nothing happens.  I tried a difficult start (turn off printer disconnect) and that didn't work.  Help, please.

    Then, you will need to contact HP.  I've seen a few cases where enter the service menu and reset the printer can cure this.  The service menu must only be accessible as under the direction of a support agent, it is possible to clog the printer by a wrong step here. See the post here for the warnings...

  • HP office jet pro 8610: print automatically get cancelled

    whenever I'm doing a print command to the printer, the screen of the printer indicates that printing is cancelled.

    Please send me the solution for the problem

    Hello

    Shut down the PC.

    Unplug the power cord from the back of the printer while it is on, wait 60 seconds, plug the power supply cord.

    Make a copy.

    Turn on the PC.

    Try to print.

    If the problem persists download and run the HP print and Scan Doctor www.hp.com/go/tools

  • Office Jet Pro 8600: Print and scan the doctor

    Will be to print and scan doctor run on Windows 10?

    Hi Gardener2010,

    Yes, print and Scan Doctor is ready Win10!
    Jean

  • HP Office Jet Pro 8610: printer goes offline at rest - requires market power when the new document is pending

    Printer and all functions work fine.  However, lately I sent a doc to print who just sits in the queue.  When I look at the printer by clicking on the tray icon I sde is offline.  So I turn the printer off and back to get it on the network.

    I don't really have any options to change my home network and hope it is some of the printer which will avoid going offline like this, or a faster way so he can go online without turn off and on.

    That dot the 'A' and a passage of "T" by the first response:

    The printer model-

    HP Officejet 8610

    Detailed problem description-

    Printer goes offline without warning.

    New print job is in the queue showing the printer is offline.

    Must be able to market, leading to the resumption of the print job.

    Operating system on the computer (including the revision of the service pack)-

    Windows 8.1

    Method - USB, LAN, Wireless cable connection? -

    Wireless, same problem if DHCP or static 192.168.0.253

    Brand and model of router and modem? -

    BrightHouse Cable router/Modem: Arris, H/W version 6, Firmware 8.0.120

    Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

    None

    If wireless, when the problem occurs, which is blue wireless light on the printer, active, disabled or flashing? -

    WE

  • Example: Office Jet pro 8610: printer, officejet pro 8610

    This printer can use the 8.5X14 paper?

    Yes it can.

    Link to the 8610 plug.

  • HP Office Jet Pro 8600 series vacuum software disk

    HP Officejet Pro 8600 print/fax/scan/copy/web; Model: SNPRC-1101-01; FPU: CM749-64001; S/N: [redacted].

    I use the operating system is Windows 7 on an AMD FX (tm) - 6100 Six Core CPU 3.3 GHz, 8 GB RAM, 64-bit operating system.

    I've not seen this topic. I searched on the site of HP.

    Description of the problem:

    Just bought a HP Office Jet Pro 8600 printer. Time to install the software, but I had a Virgin software disk. What software should I download: drivers of course... what else?

    Hello, welcome to the forums!

    I saw your post about requiring the software and the driver for your Windows 7 system and your Officejet 8600. If you use the printer HP install wizard for Windows, which will search for the drivers and the software you need and will run the installation for you. You will not need all a disc.

    I hope that helps! Response please that if you have problems, I will gladly help you!

  • Mac for printer Office Jet Pro 8600

    I have an IMAC desk top connected to an Office Jet Pro 8600, running MAC OS 10.6.8.  I can't scanner to scan photos to a specific size.   I use the HP utility but no matter what I try to do the witnesses only scanned image angle front right of the scanner glass.  How can I change the size of the JPEG scanner and how to scan some picture of the size that I place on the glass?

    Hi paul8588,

    Thank you for your answer!

    Here is a video, Scanning HP 8600 Series to Mac OS. This will show you what you see for your scanning options.

    I hope this clears up things and have a good day!

Maybe you are looking for

  • Money 2007 - I can't when adding an account a have the list of the banks of attachment

    Hello; I can't when adding an account a have the list of banks in connecting the answer indicates that the list is temporarily absent. Try again later, but without success. Thank you.

  • LabVIEW crash when calling matlab script?

    My version of labview 8.6, Matlab is 7.1. In the beginning, I always get error 1047 when calling matlabscript, then I downloaded recommended matscript.dll (7.1.0.2) and replace the original one (8,6) with this one. 1047 error does not happen. And the

  • Where can I find the clock digital multi AGS for the vista sidebar?

    I recently had to smoothing on my computer and do a vista reload fee.  now, I'm trying to find the clock digital multi AGS (the most useful for the windows vista sidebar gadget was by far, in my humble OPINION).  Where can I find the clock digital mu

  • Cannot install or a program open error: 'open with '.

    Original title: When you install or open a program on my computer... a window opens saying 'open with' and I am unable to complete my task... How can I prevent this arise? The window that opens has a few programs listed on my computer, but not what I

  • Office buzz

    Hi, my office is buzzing. When I try to start, the Office made a noise like a bee and the monitor starts flashing. It's so weird I can't tell exactly this noise is coming from. In my mind, it's a bad contact with the power supply inside the computer.