Office think that it is a mounted drive

Similar Questions

• Had to reload Windows vista 64 bit and now my office think that it's a laptop? How can I fix it?

  I had to reload windows after blue screen of death would not go away and now my desktop PC thinks it of a laptop and tablet pc installed programs. I use this as a media pc and run only the moviw and music on this subject. Need to get the old system, because it now seems slower for some reason any.

  Why and how your computer gives you the impression it's a laptop?

  Take a look at the toolbars when you right click on an empty part of the taskbar.  Uncheck the box about the Tablet PC.

  Tablet PC also gets a mention in programs and features / turn Windows features on or off.

  How the machine works safe mode?

  Vista Advanced Boot Options (or 7)
  http://Techblissonline.com/Vista-advanced-boot-options/

  If it works better to go that route.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  I guess you used the good (installation media) DVD when you reinstalled?

  What does type MsInfo32 in the Start Menu / RUN box speak you of your machine?

• My computer (Vista OS) install software on a CD/DVD. He seems to think that everything in the hard drive is photos or music.

  When I insert a software disc, automatic execution of Vista opens instead of the software installation tool. I set AutoPlay to run or install the software if it is what is on the disk, but not luck. (A single disc of software worked as it was supposed to on another computer.)

  Hey DaveGoff,

  I recommend removing a program called "Xplay" from Mediafour.
  Try this: 1. go to start, then Control Panel
  2. open "programs and features".
  3. scroll through the programs and see if you have the XPLAY under the title editor MACROVISION
  4 right click once a program to highlight, and then click "Uninstall/change" upward.
  5. (you may get a pop-up asking if it's OK continue.)  If so, click on "Allow")
  6. once the program is removed, you will need to restart your computer.
  
  
  Don't forget to back up your system before we do this just in case where. But it has been linked to a solution to this problem.

• FCPX think that an internal hard drive is a camera. What should do?

  FCPX think that an internal hard drive is a camera. What should do?

  YYou have probably something at the root of the drive that makes the application think that. Maybe a folder called DCIM or ITS oe a package called AVCHD. A number of things it can do.

• I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use.

  Quick question: I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use, when it is not.

  The question for a long time: I've updated two disks in my computer from 1 TB to 2 TB. They were e and K:. The KC: drive is used as a backup of data on E: drive.

  I copied all the data on the old drive E: to the new, but when I put the new drive in place of the old, XP wouldn't let me assign the E: drive letter. It is ironic that several times, I see the warning that if you change a drive letter, some programs may not work - so of course that Microsoft is aware of this problem - however, it is annoying when you NEED to change a drive letter to OPERATE programs, but Windows won't let you. Sometimes, trying to protect users from doing stupid things prevents them from making things work...

  Anyway, after some research, I discovered that if I put the drive E: OLD and "remove" the drive of her letter, then the letter E: becomes available again. It did not work, and my computer is now partially satisfied with his new E: drive. However, the same trick with the new drive K: does NOT work.

  I removed the letter 'k': the old K: drive, but when I install a new one, it won't let me change it. It happens to be stuck at 'l': it's no use to me because backup programs are ready to use the K:\ path.

  There is that no "K:" drive in my computer and I deleted the letter k: the old disk. How do I FORCE XP to designate the new drive K: so that my backup program can work again?

  Thank you.

  Did you try to start your computer in Mode without fail (repeatedly, key to tap the F8 as your computer starts) and then try to re-assignment of drive letters?
  I think that some programs on your machine may be playing with your drive letters.  Boot safe mode will allow Windows to operate with a minimum of processes that are running and you should be able to change drive letters in these conditions.

  HTH,
  JW

• Windows thinks that my DVD drive is a floppy drive

  I've had my computer for almost 3 years now without problems and now my computer decided that my dvd drive is a floppy drive. I have no floppy drive in this computer.

  I am running windows vista ultimate, 32 bit. My dvd player is an Asus - model unknown, bought 3 years ago

  Device Manager can't find the drive, but does not have a floppy drive

  ->, I uninstalled the floppy drive he sees and has attempted to use the scan for hardware, but it cannot find the diskette again. Tried to restore the computer by using the system restore, which did not work. The player turns on and turn when I put a disc in but nothing and does not pop up in my computer (which only shows my hard drive and a non-existent floppy disk)

  After trying to use demon for a drive emulator tools so that I could actually stop using the physical disk that I don't want to wear them first noticed the problem. Daemon tools has been uninstalled from the restore points, I used so I don't think that is the question.

  Any help would be appreciated.

  Thank you

  Bob

  I did what you suggested and none of it worked. Thank you for your help and I have a solution that worked well.

  I turned off the computer, unplug the drive (power and sata of course), computer turned off, shut down, reconnected and when I restarted it again, my drive was normal.

• I think that some time in the past 6 months I have day which deactiveated my d drive help please restore

  Original title: d ' training

  I have windows vista and I think that some time in the past 6 months I have day which deactiveated my d drive help please restore

  Hi Kathyreedy-hardy,

  ·         What do you mean exactly when you say "deactiveated my d drive?

  ·         Remember the updates you have installed?

  I suggest you to check the status of the disk in disk management. To so proceed as follows:

  a. open the computer by clicking the Start button, click computer.

  b. open computer management by clicking the Start button, clicking Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Navigation pane, click disk management.

  You can change the drive letter of the drive and see if that fixes the problem.

  See the article for more information:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Hope this information helps.

• How do we install the office 2016 on macbook without cd/dvd drive?

  Just ordered a MacBook pro and MS Office 2016 for my daughter's school work.

  I don't think that the MacBook has a cd/dvd drive. How to install the office 2016? Is there a MS or Apple site to download the software and use the key provided with the Office?

  The boxed version sold in the store where I work has no disk, just a card with a serial number of Microsoft which then allows you to download the program.

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A mounted drive is suddenly nonexistent after Get-ChildItem is used with a wildcard

  I use this function to mount the drive

  Function MountDrive() {}

  $name = "Functional_Storage".

  $datastore = get-Datastore $name

  New-PSDrive-location $datastore - name VimDatastore - PSProvider fs-root "\".

  CD FS:

  }

  I now try to do a directory listing using a wildcard

  PS fs:------> Get-ChildItem "something."

  Get-ChildItem: cannot find drive. There is no such thing as a disk with the name "fs".

  Online: 1 character: 14

  + Get-ChildItem < < < < "something."

  + CategoryInfo: ObjectNotFound: (fs:String) [Get-ChildItem], DriveNotFoundException

  + FullyQualifiedErrorId: DriveNotFound, Microsoft.PowerShell.Commands.GetChildItemCommand

  However, if I had just issued a Get-Childitem, no error does occur... How is it that fs becomes non-existent that if I use a joker?

  I suspect this might be a question of scope.

  You have configured the psdrive inside a function, but you seem to perform the Get-ChildItem outside the function.

  I think that the psdrive is available inside the function.

• I think that I have on my MBP 2010 mid thunderous

  Hi all.

  I think I have thunder-stirke on my MBP 2010 Middle even with a new disk it gets damaged soon as I installed it.

  I also have a heat excessive upper right (lower case), a vibrant hum in waves in the upper right (all lowercase) and the sounds of rattling lower trackpad.

  I moved the only external drive and everything works fine.

  Any suggestions on how to get rid of it?

  p. s.

  A new MBP is out of the question that I'm on a retirement budget social security now.

  Take a look at this thread, I think that it covers many thunderous better than me.

  Re: thunderous-2 after having been infected still infected?

  To find out what the problem may be, please download and run EtreCheck, created by one of the wizards own here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• Satellite Pro P100: I think that my graphics card is defective

  I have a satellite Pro P100 with a GeForce Go 7600 and think that graphic design is faulty. I was playing a game that has good graphics and I was testing the FPS cause it was laggy.

  On average, that a decent graphics card must be able to give an SPF of 20-29 but my geforce go overlooked 9-13, but I have a Satellite M60-164 before this laptop with a Mobility Radeon X 1700 graphics card and he played much better give me the range good fps. But maybe the Geforce could well be a bad card in general.

  Is it possible to update the graphics in the P100? He says dedicated graphics card.

  Hello

  first of all, no can´t you don't share your graphics card because the card is "wired" on the circuit board. With dedicated was he has it s own graphic memory and does not have a main RAM memory to use as graphics memory.

  Regarding your performance:
  Would be interesting what operating system you are using. In the case of Vista, I understand why performance is not good, because vista requires so many resources that the rest of the apps/games would not get the necessary resources for the successful REALLY.
  If you have Windows XP, then update your drivers, but use drivers on sites like:

  http://www.laptopvideo2go.com/ (2 GB LaptopVideo & NVIDIA Related News)
  http://www.OmegaDrivers.NET/ (OmegaDrivers.net - home of the Omega Drivers for desktop/laptop ATI & NVIDIA cards)

  because these drivers are almost on mobile systems, and they use the most versions of real driver of ATI and Nvidia.

  Just try it and give some feedback.

  Welcome them

• Satellite A100-454: I think that the sound is low

  I think that the general volume of the A100-454 is too low, any suggestions? Is this a driver problem or I have to config something?

  Thank you.

  Hello

  This may not be a driver problem audio because if the sound see sound card device has been recognized, and the audio driver has been properly installed.
  Vista is installed on this laptop?

  In the control panel in the sound options, you will find various sound controls.
  You should check if all controls are set to the next level

  If everything is set max I guess that the sound has been set up. possible level.
  In this case it is not things to do

• Lenovo E440 microphones reversed? I think that the left and right are wrong

  Hi, I have E440 i5 8 GB Windows 10 to date and version of driver Conexant 20751 SmartAudio HD 8.66.16.50. I clicked on "update driver" and came to is that it is the most recent version.

  In the settings of the card, I enabled 'hear this device' and position normal when you look at the screen and your hands on the keyboard, if you type the right hole mic I can hear the left audio channel and vice versa for the left. Is this normal? Try with your laptop. I mean, it would be nice if you want to record something with the laptop back on what you want to record, but I think that most of the people in the land would the laptop screen making in the face of what they want to record, especially if they're going to use the camera and video.

  Looked at google but nothing came

  Add: I noticed in the properties: configuration of the Microphone, in the 'Options' tab advanced, there in the background 'Improve the Signal' and a checkbox "Enable sound improvements" WHICH I ALWAYS turn OFF and the sound quality is crisp, clear and loud, but the pickups are reversed, now if I select this check box, the sound is really bad miserable, for 256 Kbps 32 Kbps and its going to MONO. Any permeable I scratch, sound comes from the Center, so I would REALLY like that this "activate sound improvements" disabled people, hands down. PD: This option is not even reduce any type of noise, I know it's what he is for, I can still hear my strikes and miners of sounds equally with it enab/disab.

  Another thing is: it not "Conexant Audio Setup GUI" nowhere to be seen, I have looked everywhere in the PC, this audio driver just doesn't does not with any audio different installation "Dolby" read and option on the 'enable strengthening its' in the record.

  OK, updated, I thought I had won the battle, well, almost, rebooted again and reinstalled my pc the * beep * driver CONEXANT, but found another solution, followed this tutorial
  https://blogs.msdn.Microsoft.com/matthew_van_eerde/2010/08/23/troubleshooting-how-to-install-the-MIC...
  And recovered the "pilot High Definition" and I think that this time it will stay.
  One thing I noticed that the volume icon in the lower right missing, check list "hide icons" and "Volume", it turned on, I am appearing at this time, may try another reboot.

• How to do a defrag (I think that's what you call)?

  How to do a defrag (I think that's what it's called)

  on an IMac computer

  There usually no need to do a defrag, as long as you keep a decent amount of free space on the disk (the boot volume).  The system works defragmentation for smaller size in the background files and large files fragmented usually has no performance impact.  The most important is the free spacefragmentation; performance can suffer if any of your remaining free space is in small fragments scattered on your storage media.  This happens more severely if the amount of free space on your startup disk starts to become really low, and you continue to use your system in this way.

  To do a defrag, you need a third-party utility such as Tech Tool Pro.  I don't know what version of the operating system of the Mac you're using. be sure to check the system requirements.  It's a very good idea to create a backup complete, like a clone bootable on an external drive, before using one of these utilities to Defrag.  If something happens, like a your Mac turns off my mistake during defragmentation, the disc may be damaged.  And you also need to be started from another disk to defragment your drive boot, so using the bootable backup to run defragmentation is a way.

  It can be useful if you provided more information, such as your iMac model and the version of the OS.  And also WHY you ask this question.