OfficeJet 4500 g: installation

Similar Questions

• OfficeJet 4500 - g510g: Installer does not recognize my printer (officejet 4500)

  I don't have the disc if I dl has the HP driver. I am at the end of the process and the installer says that it does not recognize my machine.

  Any help?

  Hello

  The software for your printer is available through Apple Software update, and there is no installer available on HP.com. thjat means that use you a bad driver or a one that is not intended for Yosemite.

  Remove incompatible software using Uninstall HP under Applications > Hewlett-Packard, then follow these steos to install the printer on your Mac:

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/model/3919446

  Kind regards

  Shlomi

• OfficeJet 4500 G510n: installation all-in-one printer

  The first step in installation is to click on 'Install', but the only option is "Exit". What Miss me?

  Tim,

  I'm not familiar with this error, or use Webroot security software.

  It sounds as if something is locked up - or blocked.

  The State of the printer is constantly changing: wireless status, entry and work completion, changes in the availability of the Internet (for ePrint), enters the State of ink.  The computer must have the permission and access of / to the printer to provide updates to the software of the printer.

  You may need to take a look at your Webroot security settings - and newspapers.

  If the system is aware of any issue, the Event Viewer logs may have made note of it.  The trick is to find and understand the data.

  Assuming that you don't find anything abnormal, only, you will need to restart all - this time this includes the router because it is one of the places where things tend to lock in new facilities.    If your router provides logging features good, you might be able to track all errors.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP Officejet 4500 wireless connect installation problem

  I've just set up my wireless Officejet 4500 (model G510). My network is detected by the installation CD and manual configuration wizard wireless, but not by automatic wireless Assistant. After you connect, the two have shown the result "the printer cannot find the router, please check if the network name and password are correct". However, I am sure the detected network and password were correct. Could you help me on this issue? Thank you!

  Let us make sure that the printer is not broken.  Can make a copy of the front of the printer?

  Uninstall you the HP software by using the HP uninstaller, restart and then download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

• HP Officejet 4500 installs wireless on the laptop Windows 7 computers 2, but not on the 3rd

  Help a friend to a printer with the HP all-in-one Officejet 4500 problem.  Although it has been installed on the laptop of the wife of my friend, he would never print.  When pointing the mouse on the icon of the printer the printer and the devices page, this would indicate that the printer is offline.   It was not the case.

  I used the disk supplied with the printer to install wireless on their other two laptops of W7 and installed with a wired connection on their tour of W7.  The printer properly on all PC functions.

  I used the uninstall level 4 OJJ5700 washer 8 HP utility to remove any trace of the product of his laptop and then again used the disk to install the printer.   As with the other 2 laptops, I selected a wireless connection, but unlike the other 2 it finally gives me a msg that the printer is not found on the network.  Then it prompts me to temporarily connect the laptop to the printer with the USB cable, saying that once it finishes the installation of the software, that we can then make it wireless.  It never ends install even with the cord.  I went through this process twice, and both times it sitting there on the stage of configuration for an hour more before I killed the task.

  The printer is sorta installed on the laptop, because it allows to print with the cable, although the name of the printer has a. TMP extension in the devices & Printers.

  All laptops are connected to the same network.

  Anyone who has never met this before and come up to the top with a solution?  The laptop seems to work otherwise beautifully, although I suppose it wouldn't hurt to run a full scan of Malwarebytes.  I never really knew the problem, it's viral, but I just ran out of time today before that I could make sure...

  Hi boweasel,

  Please confirm the steps for me. At this point, you did all the steps of troubleshooting of the printer, which should solve the problem. At this point the printer works with two other computers, it seems it's something with the operating system on this computer. I suggest contacting the manufacturer of the laptop on a recovery or disturbances to the OS.

  Please let me know if you are able to install and impression after working on the operating system.

  Thank you

• HP OfficeJet 4500 G510N-Z and Windows 7 Home Premium. Always a pilot missing after installation

  Sorry the post is so long...

  I have installed and reinstalled the software for my printer at least 5 times.  Whenever I get a message that the driver did not download properly.  I discovered that I get this message because Windows search driver on the "Windows Update" updates on the Microsoft Update page.  I use the printer on a wireless home network.  I learned to double check the connection and all is well.  I tried to scan for the first time yesterday and guess what?  Cannot find driver HP Document Manager and uninstall and reinstall the printer again.  I followed every suggestion support on the Web site and the drivers still don't load correctly.  Although I'm not an IT wiz, I'm very capable with computers and the resolution of problems.

  Please give me a solution time.  I interviewed for the job of my dreams last Thursday and I can not send a thank you letter or letter of reference which had been requested because of problems with this printer. I can't lose this job, in this market, it is once in a lifetime chance!

  Otherwise, I'll throw both of the HP OfficeJet 4500 G510N-Z I have a truck available bus or trash!

  Thanks in advance for your support and your help on this.

  Sincerely,

  Becky Gommel

  [deleted private information]

  Hi Becky,

  Follow the steps below

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80348-1&cc=us&DLC=en&LC=en&OS=4063&product=3986399&sw_lang

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• HP Officejet 4500 All - in - One Printer - G510g 8.1 windows installation 64 bit

  After running a HP Officejet 4500 All - in - One Printer - G510g two an old notebook Windows XP and 64-bit computer laptop, an ASUS Windows 8, subsequently updated article 8.1; I am now trying to install it to run from a laptop Toshiba Satellite NB10T-A Windows 8.1 64 bit, but without success.

  The original installation CD does not provide an installation but start up (probably because it is only compatible with Windows XP and 7.

  The site www.hp.com offers a download a driver for the printer to Windows 8,162 bit. Sounds to download very well. Unpack the file, said he set up, but in the end, the driver is not available.

  There is no option to uninstall, in Control Panel of configuration/Printers/software control panel.

  Without that driver, the system Windows 8.1 recognizes the printer and allows the simple printing applications of ffrom. However, it is not possible to use scanning options, which gives the error message that the driver is not available. HP or HP Document Manager Solution Center are installed.

  I tried printing HP and doctor Scan. It recognizes the printer on USB link, said that lack of drivers, downloads, unpacks and installs the drivers. But the printer icon in the control panel of configuration/Printers continues to have an alarm icon indicates that the printer is still missing drivers.

  I also tried installing HP Printer Wizard. The result is similar.

  Please tell us how I can install this equipment scanning options and make sure that the machine is compatible with 8.1 64-bit windows.

  Thank you

  Dear Rainbow 7000.

  Thanks for your help. I tried following your instructions - remove all files HP, starting in minimal mode, downloading and installing new. Also tried to disable the antivirus scanner. But in vain. The drivers scanner has not been installed.

  The 64-bit Installer driver downloaded, but did not complete installation despite the night running. Looking at the processes running in the Task Manager, the name of the installer is for a 32-bit Installer (see the screen attached capture). Could be the problem?

  After trying various alternatives to the procedure, I gave up and downloaded the base driver HP Officejet 4500 m G50g Corporate Edition 14.0 (link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110155-1&cc=pt&dlc=pt&lc=pt&os=4158&product=3919449&sw_lang= ). This download is recommended only for the professionals, which I am not - but nothing worked.

  This driver installed fine. He recognized the printer and scanner. The printer and the scanner properly. The menu shortcuts also work as previously.

  It looks like so there is something wrong with the installer 64 bit full feature software and driver. The solution for the other wil the same problem is to try the base driver - although it is for the professionals.

  Thanks for your help, and I hope this will help other users.

  Have a happy new year.

  -------------------------------------------------------------------------

  Screenshot of the name of the installer:

  

• Installation for Officejet 4500 disk crashed in Acer Aspire E1-571

  I have a laptop Acer Aspire E1-571 with Windows 7 64 bit and has recently purchased the officejet 4500. I used the disc that came with the printer to install the software and during this process, an error box emerged which didn't say anything other than "error". Then I was asked to restart my computer and do, my computer could not restart and had to start itself in system repair mode to correct everything that had happened. It works fine now, but I don't know if I should try to install the drivers from the HP website or not, because I would not let this happen again.

  I did not at all connected USB and configuration was going well until the error message occurred.

  Hi Lulzpup,

  Download and run the installation using the software on the link below. Let me know what you find?

  Driver and HP Officejet Full Feature software

• can I get an installation for my hp officejet 4500 cd

  can I get an installation for my hp officejet 4500 cd

  You can get an installation CD or simply download the drivers for your printer. I included a link at a time.

  The installation CD

  Drivers for your printer.

  Let me know how it goes.

• Impossible to scan on OfficeJet 4500 G510n-z under 'Windows 7 starter' - installation problem?

  Recently bought OfficeJet 4500 G510n-z and installed the SW CD on laptop Toshiba running Windows 7 Starter - NOTE when installing the SW printer I have had only a single option enabled: "install the minimal SW.

  How and what SW that I need to install to enable support of the san on this laptop?

  FYI:-I also installed this same SW HP on the Windows XP laptop and I am able to scan documents to this computer (in this case, I believe that I chose to install it "Full SW" option that has been disabled during the installation of Windows 7 Starter.)

  Could you provide links and instructions for essences SW install to support scan on Widows 7 Starter function?

  Using the Starter edition, you can scan sing Windows Fax and Scan:

  Use one of the following methods to scan a document.

• OfficeJet 4500 Wireless - MacBook it installs with USB, but can't find it on the network

  Help! I just bought a new MacBook (OS 10.6.4) and try to use the HP Officejet 4500 Wireless with it. I bought the printer a month or two ago and it has been implemented on my wireless (a Netgear - WNR2000 router) and works very well with my old iBook G4 and the Windows PC at home. My new MacBook is connected to the fine of the Internet, but when I went to use the printer, it seems to install ok, make settings IP etc. of the printer on the network, but it's not far past. He says that the printer is "unreachable" or some such nonsense and refuses to see it on the network. I tried both with and without the CD installation, and after you have uninstalled the software HP to uninstall and reinstall in the system of preferences--> Print and Fax settings. But he only sees the printer if I connect it with USB, which goes against the reason for which I bought it.

  I ran the software update and it has found a new version of the software to download to the printer when connected via USB. But there seems to be no way to convince him to find the printer on our network wireless

  Any ideas?

  -Mary

  Wow - I solved the problem. How ridiculous of a solution is that?

  I saw a mention on another Board need to have a SSID for the network of less than 6 characters/letters to get the Mac to work with some other printer/router configuration.

  So I tried here - since I had a network SSID of 7 letters.

  (1) I went in my screen to config the router and changed my SSID to one that was only four letters. I also took the static IP address for the printer, I had just set up (so for those of you watching at home, ignore my comment on this tactic, it was a herring!) leave the settings as they were before I ate with it.

  (2) I then restarted the router, the computer and the printer.

  (3) I first put in place the new SSID on Mac (change the SSID of the router to the old password only left, so it was just a matter of returning the password on Mac, when it entered into the 'new' network). I checked this by seeing in screen config the router if the Netgear now he showed in his list of connected devices (it wasn't before, and I was suspicious that he was some other weird problem, if the Mac has used the Internet very well). He did it!

  (4) then I used the front panel of the printer to go into Options--> Menu Wireless--> Setup Wizard and configure the printer again on the new name of the network SSID. Then I went to the Options--> Print the report--> Config network. It would therefore be to print a page giving the State of the connection confirming that it was the network.

  (5) then I went back for the Mac and use it again the screen of the router config I confirmed that now the printer was also showing up on top of the screen of connected devices (it wasn't before, now she and Mac have been listed!). Then I opened system--> print and fax preferences and tried to add the printer again. This time he finds immediately on the network (using the so-called Hello?), and since I already had the software update (using the steps suggested above) that she already had the correct printer software to use. Wireless printing fine now... After all this noise.

  So, apparently, PrintDoc, you need to add a small little by this spiel you gave me above - to install a printer wireless on a new Mac with a working wireless network (at least one with a Netgear WNR2000 router), the SSID of the network should really be only a couple of long letters (4A worked in this case but not 7). Why, I have no idea. Ridiculous, like I said.

  Thanks anyway.

  I hope this discovery helps someone else too!

  -Mary

• HP OfficeJet 4500 G510N-z: HP OfficeJet 4500 G510N-Z and Windows 7 Home Premium. Always a pilot missing after installation

  I have installed and reinstalled the software for my printer at least 10 times.  Every time after a day I losse the driver for my impression.   I use the printer on a home wireless network.i have window 7, I learned to double check the connection and all is well.  I tried to scan for the first time yesterday and guess what?  Cannot find driver HP Document Manager and uninstall and reinstall the printer again.  I followed every suggestion support on the Web site and the drivers still don't load correctly.

  Please give me a solution time.

  Hello @albahras,

  Welcome to the Forums of HP Support!

  I understand that after a day or two, your HP Officejet 4500 Wireless all-in - One Printer seems to be uninstalled from your Windows 7 computer and you must reinstall to get it working again, but only temporarily. I would like to work with you today with the resolution of this problem. Sometimes printers will go into a mode offline on computers, which affect printing. Because your software seems to be actually deleted from your Windows computer, I believe something within the operating system is causing this issue. To solve this problem please can I you follow the steps below.

  Step 1: Run printing and doctor analysis tool:

  If you have not already run this tool, can I please have you run it. HP printing and the doctor analysis tool will run on your computer and the "difficulty of printing" and "difficulty of analysis' questions for you." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Please click here to download and run printing HP and doctor Scan.

  If all retired as fine, please proceed to the next step.

  Step 2: Run Microsoft Fix tool:

  I'm going to make sure has no problem to register in your computer that could be the cause of conflicts of printing, you download and run the Microsoft FixIt Tool. Please click here to access the difficulty it Microsoft tool. Once the site opens, select 'Print, fax, scan, share or save' in step (2). Under step (3) select run now to 'diagnose and automatically fix the problems of the printer and printing '. Once the tool is downloaded, run the tool.

  Once completed the Microsoft Tool, please test your machine to ensure that everything works correctly.

  Please reply to this message with the result of your troubleshooting. If the problem persists there are other steps that can be performed troubleshooting. I look forward to hear from you!

• OfficeJet 4500 G510n-z hangs up during installation or has missing file

  I have recently upgraded your older desktop for Windows 7-64 bit.   Everything works great except that I can't get my HP Officejet 4500 G510n-z everything-in-one-printer to install.

  I loaded the software before when the machine was working under Windows XP.  I recently bought a laptop and used the same CD software to install printer on this unit with no problems.  When I insert the CD and AutoPlay starts the Setup program seems 1) hang up in the step of verification system, or 2) declare that a file is missing (I don't know which) and then stops.  I tried to uninstall the software, tried to uninstall using Uninstall_L3.bat and restart the PC, to no avail.  I don't know what else to try.  Technical support costs, I could probably buy another printer.

  I tried to remove completely all the HP software from the office refurbished, but now I can't find the Util / CCC folder.

  How can I remove completely any / all traces of the HP from the desktop software?  Still working?

  My printer was working fine until I needed to upgrade the operating system to Windows 7-64 bit.

  brooksk

  Hi brooksk,

  Welcome to the HP Forums.

  I see you are having problems installing the printer on Windows 7.
  I'll be happy to help you.

  Here is a document to do a complete uninstall of the HP software. Lists all uninstall.

  Uninstalling the printer software.

  I disable all the start up programs and temporarily disable the Antivirus software to see if that is causing the problem. How to use MSCONFIG.

  Restart the computer.

  Then download, save, and then run the latest drivers.

  HP Officejet Full Feature software and driver.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great day.

• Windows 10 for Officejet 4500 driver

  Hello

  I've updated from windows 8.1 windows 10 and after my windows activation, even once, I did a clean install of my windows.

  After a successful installation and activation of windows, tried to install the printer driver using the driver windows 8.1.

  Installation began, but after the detection of the printer, it hangs at 'check' HP scan interface 2 to 92% and stays there... I tried your solution given in your website and forums as the restart and everything, but nothing works. I have my printer connected via an Ethernet cable with my router.

  We need drivers for windows 10 for HP officejet 4500 G510 series printers. Impossible to find on the pilot and Web site download page.

  I don't understand, how a Prime Minister like HP business fail to update their drivers with a new version of windows? It's just not cool.

  Thank you and best regards,

  Dr. serge pacome

  HP released drivers Windows 10 Compatible for HP Officejet 4500. Thank you so much HP.

  Here is the link-

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-4500-all-in-one-printer-series-G510/3919445/model/3986392#Z7_3054ICK0K8UDA0AQC11TA930C7

• I need to install my hp officejet 4500 without disc

  I need to install my hp officejet 4500 without disc

  Hello everyone, welcome to the Forums

  I noticed this thread for you all in need of the drivers for your Officejet 4500 and I want to help!

  There are three models of the Officejet 4500 so I would include the driver for each other information in order to cover all the. Below I will give you links to download the drivers and software for your model of JO 4500.

  step 1: Determine which model of 4500 JO you. Click here to help you find the model number:

  How can I find my model number?

  Here are 3 different models:

  • HP Officejet 4500 all-in-One Printer - G510g
  • Printer HP Officejet 4500 All-in-One-Office - G510a
  • HP Officejet 4500 - G510n wireless all-in-one printer

  step 2: Click on your model to download and install the driver and software. You will need to choose your operating system, then click on 'Next' and then you choose 'Pilot' and download:

  1. HP Officejet 4500 all-in-One Printer - G510g drivers

  2. HP Officejet 4500 all-in-One printer - G510a drivers

  3. HP Officejet 4500 Wireless all-in-One Printer - G510n drivers

  I really hope this helps you with your driver and software installations!

  All the best,