OfficeJet 4500 G510g-m it not install correctly
I have a printer all-in-one Officejet 4500 G510g-m. I tried to install & uninstall several times on A Dell 2.80 core dual processor
with 2.50 GB of memory. With Windows Vista Home Premium 32 bit. Every time he tells me that I can't open the cause of box tool, that it is not connected... Printer, scanner and fax will appear on the control panel. Then, I made a full recovery on my PC and tried to install it again.
It allows to print when you do a copy, page test and wordpad, but not from Windows photo gallery and will not let you check ink levels.
How can I uninstall this thing and get out all the old files and get my right rear register. Also, how can I get this printer to work?
Any help would be greatly appreciated.
I did a microsoft Fix - it for windows tools, I ran a Revo Uninstall, then I did a disk cleanup.
Then I reinstalled the drivers I downloaded from HP and the HP software. The complete program,
Version 13.0. restarted the pc and it would not always print from windows photo gallery, but eventually, I went and bought a 3 feet for the printer usb cable and everything works fine now. I knew that when you scan, you have to scan my documents and then print it. Thanks a lot for your help.
Tags: HP Printers
I work for four days, try to install it, once again, my Officejet 4500 full package. And the frustrating thing is that the installer says that all of the software, with the exception of imaging and web printing, is installed. This includes the Solution Center. Yet, the center of Solution is not found anywhere else on my system.
I work with a Windows 7 Ultimate A55MH; 2.90 GHz AMD A8 - 3850 APU with graphics card Radeon HD;
cache 512 KB memory primary; cache memory secondary 4096 kilobytes; Tip: BIOSTAR Group A55MH
The bus clock: 100 megahertz; UEFI: American Megatrends Inc. 4.6.4 10/04/2011.
2479.86 GB drive hard usable capacity
1149.13 gigabytes of free disk space
ASUS DRW-24B1ST c ATA Device [scanner]
ATAPI iHAS124 D ATA Device [scanner]
Portable Seagate USB device [hard drive] (500,11 GB)
ST3160815AS [hard drive] (160,04 GB)
ST500DM002-1BD142 [hard drive] (500,11 GB)
WDC WD10EALX-009BA0 [hard drive] (1000,20 GB) - Windows 7 Ultimate disc...
WDC WD3200JS-22PDB0 [hard drive] (320,07 GB).
There is no reason that my system should not be qualified to run this printer/scanner and all software fair that goes with it. So, what, according to you, is the question? Is it me, or is this HP? Please, be honest with your answer...
Thanks for letting me know that the printer installed correctly on other computers.
Follow this post from @SuperMario1 to remove the printer files from the registry.
It's a different model, but it provides instructions to dig dip into the registry and get all of the HP software from the system.
You can also run the Microsoft Fix it Tool to the problems that programs cannot be installed or uninstalled.
Let me know the results.
Help please. I tried for days install my portable printer officejet 4500 G510n to my PC G wireless that runs 10 recent Windows updates. I tried everything, including the uninstall/reinstall but it is never successful and I understand the different problems every time. I even tried setting up by USB... always without success. I don't understand what is the promlem. AND when I use one of the programs that install fails, it installs a solution for me for windows 8, which does not, of course, because I have 10. I really wish I had a printer again!
Welcome to the @DLBHJ forums
I hope to help with installation issues you are having with your Officejet 4500 on Windows 10. Here are some steps to start you off. When you are finished, just reply to me with the results, errors, etc. Any information you can provide will help!
2 restart the printer and the computer entirely.
3. clean boot the computer and restart it: How to clean the boot
4. when the computer restarts, download and install the software here.
5. once the printer installed, return to the boot process and re - activate the start up programs.
I hope this helps and works. Let me know what happens.
Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.
I don't have the disc if I dl has the HP driver. I am at the end of the process and the installer says that it does not recognize my machine.
The software for your printer is available through Apple Software update, and there is no installer available on HP.com. thjat means that use you a bad driver or a one that is not intended for Yosemite.
Remove incompatible software using Uninstall HP under Applications > Hewlett-Packard, then follow these steos to install the printer on your Mac:
Device does not print when turned on. I then cancel printing, turn off, restart and it prints. All the diagnostic seftware shows green controls with messages like "printer ready" & "no problems found".
Hi Donatkisson,1 have you made changes to your computer recently?
2. you receive an error message when you try to print?
3. What is the operating system installed on your computer?I suggest you to follow the steps and check if it helps.Method 1: Follow the steps in the link and check if that helps.
Printer in Windows problems
Method 2: You can also follow the steps in the link and check if it helps.
I'm having a problem that gets worse. My OfficeJet 4500 G510g will not print a full page. I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page
Thanks for getting back to me.
My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.Have you tried these steps in my previous post?
When I try to install the downloaded file (OJ4500vG510g-m_Full_13_en) extracts the Officejet 4500 g510g-m dirver for Win7-64 bit, then a back screen flashes on the screen for a fraction of a second, then nothing else happens.
Don't know what to do at this point.
Thanks for the clarification.
Please try following these steps and check if this may help:
1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
7. run the installation file and check all difference.
If the problem persists, right-click the computer icon and select manage, then open the Device Manager.
Devote the processor category and specify which processor you use on your PC.
Long story short, I had to uninstall and reinstall evrything and like last time, it will not install correctly.
The manual says to unplug the unit before installing the soiftware I did but it ended up installing without ever making me plg inside. I Reboot and "Document Manager" appears and I install other software from here - all except the picture one thing. But things do not work quite as it should. Doctor Scan and printing HP goes to its process and tells me "the comprehensive software solution for this product has not been installed" and then letting his work - install, I get an error without number, or something else to say simply: 'Download failed'. "." And 'Retry' will not work.
For a HP technician on a Board here I try the following:
Follow the steps below to update the software to the latest version.
First step: clear temp directory
1. tap folder in the race or search programs and files of field
2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
3. proceed to step 2 below
Second step: downloaded and extracted to your system:
1 download the drivers and full software features
2. once the download is complete, double-click the file to extract the software.
3. when the installation window opens, press the Cancel button to stop the installation
4. tap folder in the race or search programs and files of field
5. Locate and open the folder starting with 7z (example: 7zS2356)
6. right click on the folder and select copy
7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
8 open the 7z, that you just copied on your desktop
9 open the Util folder
10 open the CCC folder
11 start the uninstall_L4
12. once the uninstall is complete, restart the computer
13. run disk cleanup from the tools Accessories\ system under all programs folder
14. download and install the latest version of Adobe flash player
15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.
The problem is not # 12: when uninstalling filled to restart the computer
No uninstall never happens.
In any case then by downloading the installer to complete the installation of the window program tells me to plug in my cable. Well guess what. It is plugged in, but somehow, he thinks that it is not (although any other tried suggests that another part of the HP "brain" knows it's as the other things would have happened if it is not plugged in)
In any case I unplpug and reconnect, I reboot etc etc he still thinks that he's not pliugged in - even if step to ignore the "plug the cable into the part is taken.
Back doctor's Scan and the same thing happens mentoned above.
On my 1st installtion, way at the time where this printer gave me similar headaches, but many things were that it is impossible for me to rmember what finally worked.
Oh yes my OS: Windows 7 Home Premium 64-bit
I solved my problem on my own. Here's how:
The method you mentioned has already been tried.
The problem was, I think, to uninstall the HP OfficeJet J4580 and its software a lot, but a lot of files and folders remain and are scattered everywhere and not just in the Program Files folder. This is also true for the registry entries.
So I was all uninstall again and this time made a search for everything under HP and Hewlett-Packard and remove all. After which I also used CCleaner to enter the remaining things in the windows registry - all carefully in all cases to ensure that I have do not uninstall, delete, or remove things dealing with my HP webcam.
Doing so and after a few reboots installation again and this time things developed accordingly.
I must say thatat first, it did not seem as if I had managed since the installtion software always kept thinking my HP wasn't pluggen in and connected. but he has been wrong on reboot everything has worked (except that I had to return to the installtion to install other software associated with it.
Thanks for your help
My Officejet 4500 G510g HP Solution Center opens not once 10 Windows worm 1511 was expelled 12/30/2015. Windows KB3133431 update has been installed automatically on 06/01/2016 and who should have solved the problem, but he did not. I uninstalled my HP software and I ran HP Support Assistant to download the current software for my printer, but that didn't fix the problem either. I checked my HP programs in the control panel and found Officejet 4500 510a-f is installed. But, Officejet 4500 510g-m is what I need. I tried to install the software, g-m , without success. I also tried to uninstall the software from a to f in the Panel, but could not do that either. CCleaner comes with an uninstallation tool, but it also failed. Can someone give me help on how to removie this software (Officejet 4500 510a-f) of a machine Windows 10?
I was able to solve the problem. I downloaded a free trial of 30 days of Revo Uninstaller Pro and with her, I was able to uninstall HP Officejet 4500G510a-f. Once this is done, I managed to install the correct software for my printer. HP Solution Center is back on my desktop and everything works as it should.
I have Officejet 4500 g510g-m connected by USB to a Toshiba laptop that is running Windows 7.
I got and error message "software HP is perhaps not able to scan the destination by default because the software is not available or does not work properly. When a scan of the printer is done using HP diagnostic every thing works fine if I get this error message.
Over time I got the impression that I uninstalled the printer several times and reinstalled, this time when I always get the error scan and sometimes an other error message with error numbers 8, reinstalled [(6,0,-2417319779)] tells me to reinstall the software.
I wonder if the problem with Windows updates. Between updates of Windows I can usually correct the error messages and the printer scanner works fine. This time, I can't solve the problem.
trishred, good for a later use HP made all our software and drivers available through our Web site. Just save the link below and if you need to reinstall the printer on this computer or another just select your operating system and follow the download instructions.
I am happy that this solved!
I have Windows 7 Home Premium 64-bit.
Printer recently started feeding the slightly twisted paper. Top left margin is 1 inch, low page 7/8 in.
This requires it a repair service or can do something to fix this problem?
Welcome to the HP Forums! I understand that your HP officejet 4500 G510g recently started to feed the slightly twisted paper. I'm happy to help with this problem!
I would recommend going through this guide. Image or printed text is twisted or biased. If this does not work, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.
Hope this helps you and have a great day!
I have a HP Officejet 4500 G510g-m all-in-One and Windows 7. Never any problems. In recent years, I have been fax from a dedicated line, separate from my regular telephone line. I decided to save money and my phone line fax. Other that simply move the fax line to a separate socket to the same wall jack as my phone and change the fax number box, is there anything else I should do? I did not move the phone cord to a different port on the fax - should I? I already ran a fax test and passed.
Thanks for any info.
9/29 - I just had a friend try to fax to me. The phone rang and rang even if I set to 2 rings. It's never logged and sent a fax.
9/29 again - I have an answering machine. I changed it to pick up to 4 fires and fax to pick up 6. I had a friend try to fax, it has not been connected. He received my faxesbut that I can't get any sound.
Looks like the problem may very well be Vonage. Since I msgd you I found 6 people with the same problem and none of them have been solved. I'll have to give up and return to the dedicated fax.
Thank you very much, Rich for all your help. It was a pleasure to work with you. It's just a pity that all your hard work has not solved the problem. But at least you know if someone else asks you for help with the same problem and they have Vonage, it's hopeless. Laughing out loud
Dear hp I cannot scan my wan't scanner HP Officejet 4500 G510g-m work what is the problem I press the scan button
This time I can't see the disply no option analysis. Please refer to the documentation for the device to sharp shoot. Press ok pls reply me
If you receive a message about no Scan Options, so it is possible that the software has not been activated for scanning with the printer. Have you opened the Solution Center on the computer and tried to update the scanning to... settings in the settings tab at the bottom right of the window to the solution Center?
So, have you tried running printing HP and doctor Scan? It is an automated tool provided by HP for the many printing/scanning problems. Click here to access the PSDr HP.
I'd also take a look at the troubleshooting steps in the document located here. I hope this helps.
My HP Officejet 4500 wireless printer does not appear on the control panel. How to fix it. I have a laptop Toshiba and Windows 7 Home Premium OS. Help, please. rwillm
Thanks for the update, rwillm. It seems that the installation of the printer can be a little messed up. If the printer software is always installed, but simply lacks the printer, then I would advise to do a little cleaning before choosing to add the printer back.
- Make sure that the printer is deleted from the file devices and printers
- Click on one of the remaining printers folder
- Select the properties of the print server at the top of the window
- Click the tab drivers
- Remove all drivers in this window for the Officejet 4500
Also check in the Device Manager to verify that there is no mention of remaining of the 4500.
- Click on the start menu
- Right click on computer
- Select manage in the list
- Click Device Manager in the list of questions on the left side of the window that opens
- Click the view at the top of the menu, and then select Show hidden devices
- Remove all references to the 4500 in the list of devices
After making sure of the device is gone, I recommend bike devices in the power circuit: router, computer and printer.
* Make sure the printer has a valid IP address after switching back on and is connected to the same network as your PC before adding the printer.
If the IP address and SSID are good for the printer, then try to add the printer with the printer software, you have installed.
- Click on the Start Menu
- Click on all programs
- Open the HP folder
- Open the folder for the series of the Officejet 4500 G510
- Select Add a device option
Let me know how it goes,
Have tried several times to install Officejet 6500 with the solutioncenter does not. When I click on the icon to get an error message that the solution center was not installing correctly. I saw a flash quick a message about the flash player, but on uninstall / installs later may not get the same message.
All proposals/solutions. Am disappointed right now with the Hp Printer. Online tech solution was to place shortcuts to scan ap and says the printer works perfectly like her without the Center as well as the fax, but cannot fax from word doc.
In addition, I don't have the help files to set up the printer. Any help on that would be great.
There could be two questions
1. your computer does not have a more recent version. Please download and install. Now reinstall the hp software
2. if above does not work. disable the firewall (including the windows firewall) and check the solution Center.
Maybe you are looking for
Hello I have a new problem that has developed since I started to use a hub to current alternative advent with my computer pro satellite P100 laptop. If I leave the hub to power AC plugged into my laptop & it turned off for a while (off, standbay etc.
Hello I try to install Win XP Pro SP3 dualboot on existing Win 7 64 Home Premium HP pavilion. I read in the guide of Daniel on this forum but I can't find drivers SATA for Ivy Bridge chipset. Where can I find the SATA XP driver for the controller IDE
My computer is sailing very slowly when navigating. At the State checking, he said that there is no or limited connectivity. That is what it is?
I just bought a new 5741 Officejet all-in-one software installed on HP Envy with windows 10 update, printed fine the first day. Later software installed on computer 2, a laptop - prints fine - but now it will not print the first I installed the softw
This afternoon I did an update of pc in turn, I lost all my programs. Creating a new restore, point I put in the description box the day before the start date of pc, but it will not take me. Only options it shows are all after the beginning of misery