Officejet 4500 with Mac wireless connection problems

Similar Questions

• HP Officejet 4500 G510n-z Wireless connection print Windows Vista, but not from Windows 7

  Printer HP Officejet 4500 G510n-z seems to be connected to my Dell laptop with Windows 7 on HP Solution Center page, but does not print. Documents just get stuck in QC. It was printing then it wasn't so that's when it wasn't. The printer works when I print from a laptop more old Vista. The last time this happened, I uninstalled and reinstalled the HP software and that doesn't seem to help. Then, for some inexplicable reason, impression began to work. It has now stopped working again. I can scan the Windows 7 laptop but not print. I tried all the troubleshooting tools that I could find without success. Thanks for trying to help.

  Hello-

  It could be caused by a couple of things:

  1. firewall on PC or router.

  2 interference (microwave, cordless phone base @ 2.4 Ghz)

  3 distance from router

  4 corrupted printer driver.

  Turn off the firewall you have and you move anything that can cause interference to router.

  If none of the above solves the problem, I'll have to install a different printer driver.

  Click Start.

  Go to devices and printers.

  Click Add a printer.

  Add a local printer. Create a new Port, then choose "Standard TCP/IP port.

  Click Next.

  TypeRegeditdans in the box 192.168.1.12 IP address or host name. (uncheck the box 'Interrogate the printer')

  Click Next.

  When the printer list opens, click windows update. (it takes a few minutes)

  After the box appears, choose HP (not Hewlett Packard) on the left and choose "Deskjet 990c" on the right.

  Click Next, the default value and end.

  Try to print using the printer Deskjet 990c.

• HPlaser 1102w: HP Laser 1102w with Mac wifi connection problems

  Right. Hello. Basically, I've had this problem before and someone else fixed, now he has done it again and I really need someone to walk thorugh some steps. Forgive me if it's something really easy, but I'm not a tech person.

  The Maverics, wireless printer Mac was finally up and running, everything was fine.

  Owner changed the router on a better and faster. Yay!

  Printer will connect is more to the Mac. Boo!

  If printer will work when plugged into my computer, but is no longer trying to get wifi.

  I am a PhD student, I really need a printer to work... not to mention, I have three classes to teach next week and may not print all what I need for the class without sitting on the floor, which is fine for some, but it would be much easier if I get this sorted wifi thing and know what to do for the next time this happens.

  Tried to go through the open printer settings of utility, utility will not open. I'm pretty sure that this is where I need to change the wifi info so it can recognize the connection, but cannot understand why it won't work. (Please correct me if I'm wrong!)

  So basically, I need someon to walk me through how to get this recognized for my wifi.

  I know that others have understood a work-around on it using the PC of someone else. This is not really an option.

  Anyone can guide me please you through what to do here, how to get this bloody printer to recognize the new wifi Info? Any help would be appreciated to greately. When this printer is working, it's great. But when the slightest thing goes wrong...

  Thanks in advance. Screenshots and Cape ' do DummySpeak would go a long way with me. I am a student in art, tech, not so much.

  Thank you!!

  Hello @maddyjames,

  Thank you for showing your interest in the HP Forums! I see that you want to configure the printer on the new network. I would like to help.

  Restoration of first default printer.

  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration page to make sure that the old network settings are disabled: print a Configuration or report Page.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Remove the printer in printers and Scanners. Plug the USB cable from the printer to the Mac, and add the printer again. Make sure that it shows just the name of the printer. LaserJet P1102w. You may need to run the Apple updates.

  Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

  LaserJet P1102w.

  You can follow the steps rather than watch the video if you want.

  Then go to the Apple, system preferences, printers and Scanners.

  Highlight the Laserjet on the left side of the window.

  Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

  The integrated for the printer Web server opens.

  Click on the network tab, select Wireless on the left side.

  Fill in the information for your network. Make sure that the infrastructure is selected. Status: Make sure that you select enabled.

  Apply the settings.

  Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear)

  Remove the USB printer in the list of printers and Scanners window.

  Disconnect the USB cable and try and print.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• OfficeJet Pro 8500 a909g wireless connection problem

  I have a printer wireless OfficeJet Pro 8500 a909g.  My PC is Windows 7 (64-bit).  Recently, the printer wasn't working reliably and we took to reboot our router frequently at the same time.  Router problems seem to be solved because my PC at home and the work laptop are well connected and running.  However, the printer would not work last night when I really needed.  The documents would appear in the queue, but never reach the printer.  Today, I uninstalled all the software of HP using the CD of origin and reinstalled all the latest software and drivers from hp.com.  Of course, I rebooted the printer several times during this process.  Using the Network Wizard wireless via the screen of the printer, I am able to locate my SSID and enter the WPA key.  The printer confirms that it is connected to the network.

  If my computer and printer are both connected to the same network why can't the HP software locate the printer?  Whenever I try to run the installation/Setup program it tells me that there is no HP printer on the network.  As I said, this printer has worked on this wireless network in the past.  I also downloaded and run the scan HP and difficulty of the program to see if she could solve the problem without success.

  Any other suggestions?

  Well, what I'm going to make you, it's just a basic uninstall and reinstall the printer. I'll describe the steps and you are right, we can use the USB > wireless Assistant. You can access that by running the software after the installation of the USB. Here are my steps...

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3752459

  Install and let me know the result!

  In addition, here is how you set a static IP address: allocating an address static IP to your printer of HP Wireless - Windows 7 - YouTube

  Have a great day!
  

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• computer wireless connection problems

  Hello, my name is Colin and I'm having a problem with my wireless connection. When I connect to my router, the work of connection for a few minutes, and then it disconnects. I know this isn't the router, because all my other devices work perfectly well on it. I tried troubleshooting and it does not detect anything. I'm on the operating system windows 7 on a Mac Pro 1.1 version. Thank you! -Colin

  Device default internal for laptop wireless

  I'm seeing this many lately.  I presume that you are referring to an internal wireless installation in a laptop?

  My theory is that this is because many people keep their laptops more time to keep Windows 7 and avoid the 8 and 10.

  I think wireless facilities begin to fail and what you are experiencing is the first signs of this failure.

  I found that the installation simple and cheap($20) of a small USB wireless installation it will replace and work better than the internal one ever done.

• Satellite A660-13D - I can't go 65 Mbps with the wireless connection.

  + Sorry for my English is not my mother tongue. +

  Hello

  I expose my problem:

  I can't go to 65 Mbps with the wireless connection. I can't move this connection speed.

  Configuration of the laptop:

  * Windows 7 Ultimate 64-bit (with all updates installed).
  * All the updated drivers correctly.
  * With the latest version of the BIOS.

  Router:

  * Tp-link TL-WR1043ND, installed at 3 metres above the laptop (without obstacles).

  The router configuration:
  * WPA2-PSK AES.
  * 802.11n
  * Maximum output power.
  * Channel: 11 (not automatic, that this channel is relatively free).
  * Width of channel: 40 Mhz.
  * Maximum tx frequency: 300 Mbps.

  Other information:

  The wireless card drivers are correctly then updated (ver. 5.60.48.35).
  * The router has updated the firmware.
  * I tried all the settings of the wireless card.
  * Bluetooth off (without interference).
  * {color: #ff0000} there are other computers on the network that connects 150 and 300 Mbps (with the same network configuration). {color}

  Thanks in advance,
  Greetings.

  Post edited by: Xibalba

  Have you tested using different channels?
  Have you tested speed WIFI connected to another router?

• HP Officejet 7612: Also how wireless connect my laptop to my printer? (Already connected Dell desktop computer)

  I just bought a printer Officejet 7612.

  I have setup my Dell desktop (windows XP, ASUS router) with a wireless connection to the printer successfully.

  My Dell desktop computer is connected to the router via a cable ethernet ASUS.

  I thought that my laptop (Fujitsu T900, windows 7) would automatically see the printer; but it doesn't work.

  The laptop connects wireless to my ASUS router to access the Internet.

  For my laptop see the printer Officejet 7612 - do I also need to install the software suite Officejet 7612 whole on the laptop (as I already did on my desktop Dell computer)?

  Thank you once more!

  (I apologize in advance because this is probably a stupid question

  Hello @Scooby777,

  Welcome to the HP support forums.

  Certainly not a stupid question.

  The answer is: Yes, you need to install the software on all your devices.

  You can also choose to install the base drivers.

  Base drivers will give you all the features of the printer.

  If you need additional assistance, please let me know.

• Pavillion G6 2014tx: wireless connectivity problems

  Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

  I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

  Hi there @Parthsagar2010

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with your wireless connection, and I am happy to help you with this.

  I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

  HP Pavilion g6-2014tx Notebook PC - software & drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

• Using of Windows 8, need to remove outside wireless connections that interfere with my wireless connection - unable to do

  Two unwanted connections always connect, and I guess they are somewhere in the neighborhood.  'Delete' never appears, I read means that they have security blocks are not actually using my computer.  However, they interfere in some way because whenever I have remove control of these two connections and click on mine, they come immediately with the checkmarks.  Therefore, the Explorer, "you are not connected to the internet."  Quite frustrating.  Sure that if I use explore 9 or 10, as note am access to explore my office rather than splash screen.

  Link in double wire and content:

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-windows_8/need-to-delete-outside-wireless-connections-that/3413ce5b-400C-4C83-9cab-6fd54d13e1e6

  need to remove outside wireless connections that interfere with my wireless connection - unable to do.

  2 outside wireless users interfere with my wifi connection. Cannot remove them. Today, my wifi was totally blocked on Windows 8 with an asterisk in addition to the wifi icon. Finally, shut down the computer for a while, started again and immediately accessible all 3 networks and disconnected two parasites. However, computer won't let me remove them entirely (i.e., no ' delete'). Is there a way to do it - makes me crazy? One person suggested access "Manage network connections", but couldn't find where, he said, it would be. Thank you.

  Hello

  Thanks for the reply. Refer to these methods and check the status of the issue.

  Method 1:

  a. open the charms bar, click/click on settingsand then click / tap on the Network icon.

  b. click right , or tap and hold on the wireless network (ex: Brink-router) in the list of networksand click/click on forget this network.

  Note: Windows does not provide the option 'Forget this network' if there is a profile high-speed Mobile which is supplied by the carrier. The option appears only when a custom or user profile is created.

  Note: 'Forget this network' is not available for networks wireless listed that not create you a network profile for.

  Method 2:

  Alternatively, you can refer to this method:

  a. press the Windows and X keys .

  b. click on (Admin) command prompt.

  (c) in the command prompt, copy and paste the following command and press ENTER.

  NOTE: this command will give you the list of all profiles of wireless network on your PC.

  netsh wlan show profiles

  d. in the command prompt, type the following command and press ENTER.

  NOTE: this command will delete the wireless network profile.

  netsh wlan delete profile name = "WirelessProfileName".

  For example, if I wanted to delete my profile from the 7shp (name) listed wireless network, I must type the following command exactly.

  " netsh wlan delete profile name = ' ' 7shp '

  e. close the command prompt and check the status of the issue.

  I hope this helps.

• Not able to scan with the HP Officejet 4500 G510n-z wireless printer

  Original title - program programs application Applications compatibility

  I bought a laptop DELL Inspiration with Windows 8.  I have connected a printer wireless HP Officejet 4500 G510n-z to my laptop; However, I am not able to scan a document to my printer and send to my laptop.

  I went on HP website to download the 64 bit version of the driver however still not able to scan.  I noticed that the version of printer driver that I downloaded is 350 a - f.  Appreciate any feedback on how to solve this problem, I just need to buy a HP-Officejet printer is Windows 8?

  Hello

  As OEM HP is responsible for the proper functioning of the printer/scanner
  and their drivers. Check with HP support, their documentation online
  and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - printers supported for Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03168175&cc=us&DLC=en&LC=en&product=3794625

  HP - how to get your printer works with Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03494007&cc=us&DLC=en&LC=en

  HP Officejet 4500 Wireless all-in - One Printer - G510n - Support & Troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP & Driver software downloads - HP Officejet 4500 Wireless All-- One Printer - G510n in
  < -="" set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ================================================

  The main issue is probably the drivers, but these can help:

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP OfficeJet 6500n wireless connection problem

  Hello

  Just bought a HP OfficeJet Wireless printer to replace my current HP printer. I spent 3 hours trying to set up this printer with my wireless network and send it hide! I get the following error

  Your PC cannot communicate with your printer at address of 192.168.1.35. Check all cable connections. Make sure the printer and the PC and the router are powered on and connected to the network.

  Unable to communicate with your printer at this time. This can be caused by a firewall. If you use firewall software, make sure the port UDP 427 is unblocked from your printer to 192.168.1.35 to your PC.

  Unable to communicate with your printer at this time. This can be caused by a firewall. If you use firewall software, make sure the port UDP 427 is unblocked from your PC to your printer to 192.168.1.35.

  If you reconfigure the firewall, click Retry to see if network communication is unblocked or click next to continue.

  I use a desktop Windows XP connected life Machine cat 5 to a Zyxel router. The strange thing is that the printer gets assigned ip address as I can see on the screen of the printer by looking at the network config. I have no firewall software or hardware firewall turned on, what's wrong?

  I have the experience of the network. For now I'll out of HP printers and have been a fan of them for many years, please help!

  Thanks in advance.

  Ian.

  A static IP address is always a good idea for a printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white. Click on ' apply

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Laptop with Satellite U300-153 wireless connectivity problem

  I bought a laptop model Toshiba Satellite U300-153. I liked the laptop for its impressive looks and simplicity. But I am facing a problem with its WiFi connectivity. It shows * LIMIT CONNECTIVIY * and cannot browse the Internet. It shows the APIPA ip address.

  Help me solve this problem. Without WiFi, I can't imagine a laptop...

  Thanks in advance

  Tonon vanbrabant

  There are a few general options that must be verified.
  First check if your WLan driver can be updated.
  Second, you must Access the properties of the Protocol TCP/IP of WLan and must check if all options are set for the automatic.

  Last but not least all firewall settings should be checked also. Most incorrect security settings might prevent the internet connection.