OfficeJet 4620 flat Scan

Similar Questions

• The printer software e-all-in-one HP Officejet 4620 includes scan-to-searchable PDF function?

  The printer software e-all-in-one HP Officejet 4620 includes scan-to-searchable PDF function? If not, all printers HP still have this feature?

  Hello

  Please try the following alternative:

  http://www.PDFCore.com/p01_advancedpdfutilitiesfree/feature_09.html

  Kind regards.

• OfficeJet 6500 - flat scan creating black lines on output?

  Hi all

  I just bought an Officejet 6500 E709a Series and when I scan a document via the scanning to plate/sheet feeder tray, I get a number of black lines in the output? This problem exists when I use the flat and not the static mode of glass?

  Any ideas? Thanks for the help.

  http://support.HP.com/us-en/document/c01658811

  This article describes how to clean the glass Strip in the autoloader of documents (ADF)

• HP Officejet 4620: Can scan, print test pages, but not documents

  Printer stopped last night.  Have you tried to reconfigure the printer, router & mobile.  I can scan and trigger test print from laptop so I assume that the connection is good, but it will not print the 3rd part of Word, Photoshop, etc.. The levels of ink and paper are all well. Any suggestions?

  Yes, it worked - if she always says the driver Version: 2.0 so I don't really understand what happened to the problem on three different computers at the same time or how the fix has fixed - but it works, thank you!

• OfficeJet 4620: No number of scan

  My office is upgraded to this printer. My boss has the same printer. Its numbers of its analyses, one in our office does not work. Scans of numbering is what makes us buy this model.  Can I change the settings to automatically number the scans?

  Yes,

  The HP Officejet 4620 software press on scan a document or photo.

  Select the required analysis shortcut and click Advanced settings.

  Open the Destination folder, select the target folder and clear the check box to display the dialog box save as, then click OK and Scan.

  Later analysis is saved in the folder configured with automatic numbering.

  Kind regards

  Shlomi

• OfficeJet 4620: Officejet 4620 scanning

  Hello

  My Officejet 4620 analysis nor documents several pages in a single PDF file.

  Under Windows7, I used my officejet 4620 very often to scan large documents into a PDF document.

  At the bottom of the scan dialogue box there was always a plus to add pages in the analysis.

  It seems as if this sign has disappeared (thanks to the driver better?) upgrade to Windows 10.

  Anyone know what I can do to restore this functionality?

  Thanks in advance for the answer.

  Kind regards

  Hello

  Thanks for adding more clarity that you use 600 dpi.

  The following post may help to explain what you're facing:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quot-add-scan-pages-quot-for-resolution-up-to-300dpi-only/m-p/5371575

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• I have an Officejet 4620 wireless printer for my office and want to be able to scan from my laptop

  I just installed a HP Officejet 4620 wireless on my desk and I am able to launch scans of the computer using "Printer Assistant" screen

  How can I install this feature on my laptop?

  I already had Center solutions on both computers that worked perfectly. Who is available for the 4620?

  Hello

  The HP Solution Center, it is an old program that pleased none compatible with newer models.

  Run the latest installation of the software on your laptop and check to see if that can help you:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108821-3&cc=us&DLC=en&LC=en&OS=4132&product=5191646&sw_lang=

  If it persists, don't forget to specify your exact version of operating system on your laptop.

  So please let me know what Anti Virus or Firewall software you have installed on this PC.

  In addition, for any errors or unexpected behavior on the laptop do not forget to describe the exact behavior or error message.

  Shlomi

• HP OFFICEJET 4620: scanning

  Hello

  I installed the software and the drive to my HP Officejet 4620 printer, fax, scan, copy. Everything works except the scanner, why the scan in particular does not work?

  Please can you give advice on the procedure as to what and how I have the scanner functional installation?

  Thank you

  Fay22

  Hello

  Thank you for using the forum.

  You need to install the complete HP scan software features.

  Here is the link for convenience, select the appropriate operating system you use and FULL of features for downloading software:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-4620-e-all-in-one-printer-series/5101229/model/5101234#Z7_3054ICK0K8UDA0AQC11TA930C7

  What operating system do you use?

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Cropping photos scanned with Officejet 4620

  I wonder if this feature is available on the Officejet 4620, I bought my parents as a gift.  I have a Photosmart C4580 and when I scan a photo, the HP software automatically detects and adjusts the cropping for me.  On the 4620, I scanned a picture using the scanner glass and this automatic cropping does not; I had to manually drag down the 8.5x11 full culture square to fit photo 4 x 6.  Is there a feature of "car culture" on the Officejet 4620?

  Sorry, it is not a feature of 'culture of self' for the 4620. The only thing you can do is drag the place of culture do you to adjust your image.

• HP OfficeJet 4620, how to scan a legal size document without chop off the end?

  HP OfficeJet 4620, how to scan a legal size document without chop off the end?

  Using the scanning software provided by HP that was installed when you used the HP installation cd

• My Officejet 4620 do not print black ink

  I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

  just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

  going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

  theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

  you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

  (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

  (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

  (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

  (4) press the scanner part and the upper part against the back wall.

  (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

  (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

  (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

  (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

  (9) now that all the screws are removed, take the Panel front and partially pop it back together.

  (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

  (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

  (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

  (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

  (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

  (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

  (16) continue to do this until the water is clear.

  (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

  (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

  (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

  (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

  now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

  p. s.

  You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

  Enjoy!  -Porf

• OfficeJet 4620: Cannot sweep to macOS 10.12 Sierra with Officejet 4620

  Since the update to Mac OS 10.12 Sierra, I am unable to scan using my Officejet 4620.

  I used to use the HP scanning software which worked well but I found out it only works with OS X 10.11 and earlier versions.

  The HP Easy Scan Soft says that it works with Mac OS or OS X 10.9 and later so I installed this.

  However, when the application is open there is a yellow explanation mark on the image of the scanner. The scanner is selected under the scanner drop-down.

  The printer works well, is that the scanning feature that does not work. I tried to reboot my laptop and printer and you have reinstalled all the drivers and application, but it still does not connect.

  Any ideas would be greatly appreciated!

  Thanks in advance

  Phil

  Hi Phil,
  The HP scanning application is indeed incompatible with Sierra, so you may experience problems.
  Remove the scanning HP by moving to the trash, then empty the trash, also remove all currently installed HP Easy Scan instances.
  
  Then install the latest version below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  If you can meet with other issues, the printer is connected via USB or wireless?

  Kind regards
  Shlomi

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• OfficeJet 4620 analysis no or copy but no print

  My Officejet 4620 analysis no or copy but no print. The top is out, but I had reset (I hope). Unable to get above where take place tie scan and copy.

  Hello dbertentha,

  Welcome to the HP Forums.

  I see that you have a problem with scanning and make a copy.

  I see that you said that the upper part of the printer broke but you were able to get back on and now that is where the problem is happening with not being able to scan or copy.

  You are able to print, so we know that you have a communication between the printer and the computer.

  I do not think that this could be a hardware problem and if this is the case, we will then have to contact HP Total care.

  To contact HP Technical Support. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thank you for your time.

• OfficeJet 4620: update Firmware for officejet 4620

  My scanner does not work, and I thought I had the latest firmware would solve. Where can I get the update of firmware for officejet 4620? I found something under the software and drivers, but I don't know if it's the same thing.

  Hi @elianab.

  Welcome to the Forums of HP's Support.  I appreciate that you try to update your firmware 4620's.

  You can download the latest firmware for printers from the HP site.  Scroll down and select the Firmware.

  Here is a link to the page drivers 4620. HP Officejet Firmware CWM1FN1451AR 2.3 MB December 6, 2015 is the latest / up to date firmware.

  Do you receive error messages when you try to scan? I can perhaps more assistance on this issue.

  I would like to know the link worked for you. If it did, that's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!