OfficeJet 4632: officejet 4632

Similar Questions

• HP Officejet 4632: hp officejet with an OXC4EB827F error code 4632

  I have a hp officejet 4632 with an OXC4EB827F error code and does not work, also the power button blinks continuously.  Tried the reset how to print HP and doctor Scan and it did not help, there is no response from the printer.  Any help would be apprciated as two years out of warranty.

  Hello!

  Welcome to HP's Forums a great way to get help.

  Thanks for your post. I see that you have a problem with your printer "HP Officejet 4632" that gives you an error message "OXC4EB827F".

  It looks like a hardware problem with the printer.

  Please try this link on the HP forum is the author of X-23 an HP Forum Expert certified. There is a link for the same series of the printer, but not the exact model of printer.

  Link:

  http://HP.care/2bP97Dx

  If this fails, contact HP Technical Support for your printer using this link service:

  http://HP.care/2bGzo6g

  I hope this helps! Let me know how it goes.

  Take care and have a nice day.

• HP officejet all-in-one 4632: Hp 4632 cut the top & bottom of page on print double side

  My hp 4632 is cutting off the top & bottom of my pages when I try to print with double-sided printing. Y at - it a fix for this problem?

  Hello!
  Welcome to the HP community @hoylep,

  I saw your post on your Officejet 4632 cutting the ups and the downs off printed pages and wanted to answer to help you. My suggestions are below.

  1 reset the printer and make sure the printer is plugged directly into a wall outlet, avoiding bars power and surge protectors.

  2 start the print and Scan Doctor for Windows in order to solve printer problems

  3. try the steps in this guide: fixing poor print quality

  4. Uninstall and reinstall the printer. You can use the printer Installation Wizard to install the printer.

  5 print from other programs.

  If the problem is not resolved at the time where all the above steps are performed, contact HP to discuss alternatives to the printer.

  If you have trouble, let me know and I'll do my best to help.

  Click on the thumb to below testify my help!
  Click on the 'accept as Solution' If I guided you towards a solution!

  Best wishes

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• OfficeJet 4632

  Can I use the Officejet 4632 via a wired lan connection?

  Hello

  Thank you for using the HP forum.

  By the specifications of the printer:

  http://support.HP.com/us-en/product/HP-OfficeJet-4600-e-all-in-one-printer-series/5305049/model/5395749/document/c03839855/

  This model printer does not support the configuration of a connection.

  Model

• HP Officejet 4632 All in One – scanning with a vertical line through the document.

  Just bought the machine less than a month ago.  Faxes and prints fine and until last week was the sweep for our laptops beautifully... but now is scanning with a dark vertical line up and down the sheet about 1/3 in the document.  What is the cause and how can I "fix" it?

  Any suggestions?

  Thank you

  Hi Rohi63.

  I understand that you have a 4632 Officejet which becomes a vertical line what it is scanned. I'm sorry to hear that, but I'll do my best to help you.

  This seems not only to be the case when using the automatic document feeder, or the glass flat?

  Usually something like this is caused because there is something on the glass. If it only happens when you use the scanner, please get a lint cloth and some glass cleaner (Windex or water if nothing else is available) and wipe the entire surface of the glass for scanning. If this only happens when scanning via the charger, you will see there is a separate strip of glass on the left looking at the scan glass, and you can focus your cleaning there.

  If this does not resolve the issue please try the steps in cleaning several times, but if nothing seems to evolve, please make sure that the printer is connected directly to a wall outlet so that we know, that he has all the power it needs.

  Hope this helps, have a nice day!

• HP Officejet 4632: Scanning and printing photos

  How many pages it can scan simultaneously? Is there a certain type of photo paper that should be used with this printer?

  Hi @Faye24,

  Thanks for joining the Forums of HP Support with your request.

  I understand that you have questions about scan using your HP Officejet 4632 e-all-in-one printer and photo paper. I would like to help.

  There are two ways to analyze, either starting from the glass tray, or by using the automatic Feeder (ADF) of Document.

  You can scan pages as much as you want. The ADF has a capacity of 50 sheets, so able to load 50 pages up there, if you had to.

  The big glass dish limits you to a single page at a time, but when you scan with the HP software it is a button that allows you to scan and create a multiple page PDF when scanning of the bucket.

  If you need assistance with the analysis please let me know what what operating system your computer is running so I can provide the appropriate documentation.

  When it comes to photo paper, photo paper sizes supported and weight.

  

  HP recommends using HP photo for best results of printing paper. You can click here to see the photo paper HP is available.

  Please let me know if that solves the problem, or if you need assistance.

• OfficeJet 4632 all-in-one: printer all-in-one

  I have a new officejet 4632, and when I type the fax number I can't separate the digits with dashes. example 1-999-9999 mine watch 1999999 owners booklet says to repeat by tapping the star, on the printer keypad key, until it appears. It is not the case and I think it's a design flaw. I tried to call to h.p. to know avail. I hate to take it back to Wal-Mart! If anyone can help me I would be grateful. Thank you charsand1967

  Hey @charsand1967,

  Welcome to the Forums of HP Support!

  I understand that you are having problems when sending faxes from your new all-in-one printer from HP Officejet 4632. I want to help you with this today. Now, on these new printers there is not need to add dashes when faxing.

  1. You simply arrow down () to the Fax option and select OK
  2. Choose Black or color fax and press OK
  3. Enter the fax number. The number will appear as a long sequence. It's normal. Press OK when you have finished entering the number.
  4. The fax must now compose and send

  The only time where you need to worry about putting a dash (-) is when a break is necessary. Breaks are necessary only if you use a card call or card long distance for fax. The break would be added so you can also enter a PIN code with the fax number.

  Example: Calling card PIN - 1 (area code) fax number. For example I will use 256 PIN calling card and the fax number of the purposes will be HP Technical Support. When the fax is sent, I would enter the calling card PIN first, then a pause, followed by the fax number. It should look like this:

  • 256-18004746836

  With some calling cards, a longer break is necessary. If you need to create a longer break, you can put two dashes.

  • 256 - 18004746836

  If you don't need a card call or long distance card, simply enter the fax as a sequence of numbers number and click OK to start Fax.

  Please let me know if this clears up any confusion. Good luck!

• OfficeJet 4632: Officejet 4632 installation Via the network

  Hello

  I bought a 4632 Officejet (which AFAIK is the same as the 4630) at ALDI in Germany, and when I tried to set up for printing from a Windows 7 PC on the same network, Windows found "two": printers

  -"HPAA6648 (HP Officejet 4630 series)' at the address http://192.168.xx.xx:3911 / (beginning with"http://"and with annex 3911 port)

  -"Officejet 4630 series (HP)' at the address of 192.168.xx.xx (without"http://"and specific port)

  What is the difference, and that should be used?

  The only difference I see is that to access the 192.168.xx.xx since the browser gives me the web configuration page, while http://192.168.xx.xx:3911 / gives me a useless XML page.

  Impression regarding both seem to print as well, using the same drivers.

  Hi @PietKram,

  I understand that you see 2 printer and can print both of them all the same, but want to know that you should be selection.

  I suggest using the 192.168.xx.xx (without "http://" and specific port). The reason is that it allows an open line of communication rather than restrict communication to the printer to a port. If you choose the one with the port, it might well work, that you have described, it is, but it can only be short term. If this port is blocked, you will probably be able to print.

• HP Officejet 4632: Does not print what is on the preview sheet

  4632 Officejet prints is more bar codes in an Excel worksheet. One day he did and the next day it didn't it prints the formula instead. I've tried it on other printers and it works very well. Help please.

  Hey @V_C1,

  Welcome to the Forums of HP Support!

  I understand that you are having problems printing of barcodes in Excel for the e-all-in-one printer HP Officejet 4632 as only prints the formula. However, I see that you are able to print barcodes to other printers. I would like to help you today to fix this code printing barcode. There is a chance that a driver conflict or linguistic conflict impression is that occurred between bar and your printer codes. Therefore, at the beginning troubleshooting I'll have load you another driver on your HP Officejet and test printing bar codes to confirm if the issue is resolved. Can I please you follow the steps below.

  Step 1: Adding a driver replacing:

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your HP Officejet 4632 and left click on printer properties.
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 6980 select the printer on the right. If Deskjet 6980 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 6980.
  9. After selecting Deskjet 6980 hit Next to complete the wizard driver new
  10. Under the printer properties window, select "Apply", but don't hit not OK
  11. Select the general tab
  12. Rename your printer in HP Officejet 4632
  13. Click OK
  14. Finally, right click on your HP Officejet 4632 one more time and click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  17. Press apply and OK

  Step 2: Configure the Auto-Duplex feature:

  1. Click on the Start menu
  2. Select the devices and printers
  3. Right click on your HP Officejet 4632 (Deskjet 6980)
  4. Left click on printer properties
  5. Click the device settings tab
  6. Under Installation Options click on the drop down menu "unit duplex (for printing on 2 sides)" and replace the "installed".
  7. Once the settings have been adjusted click apply and OK

  

  Now that the other pilot has been successfully added to please try to print a barcode in Excel to confirm if the problem is resolved.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet 4632

  Is all-in-one HP Officejet 4632 compatible with Windows XP Professional Version 2002, Service Pack 3? Is my computer: Intel (r) Celeron (R) M; processor 1.30 GHz
  1.30 GHz, 0.99 GB of RAM
  Physical address extension

  The short answer is Yes, if you install the full recommended software found here

  The longer answer is this OS XP and MS Office 2003 support ending 08/04/2014. Be aware and prepared. No more updates or patches. As IE8 is your limit, any subtle change in coding to IE8 will be limit internet or make it unstable/unusable. I suggest that you are looking for a WIN7 machine as soon as POSSIBLE. (Unless you like WIn8)? ....

• officejey4632: how to make letters with the numbers on the keyboard of my officejet printer 4632

  need to put in the letter and numbers then how can I go from one to the other?

  Hey @septb5,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand you are trying to change from letters to numbers on your Officejet 4632 e-all-in-one printer. I can help you with that.

  When you press a key on the keyboard repeatedly, he spends the lowercase, uppercase, then the numbers. So, for example, if you press the 5 button eight times the highlighted key will go j-k-l-J-K-L-5-j. If you the five necessary then press the button seven times. If you press these keys too slowly then the printer stops at the last key that has been highlighted. You can use the left arrow to the left of the screen to go backward one space.

  Please let me know if you have any other questions. If not, have a great new year!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• HP Officejet 4632: How to enter special symbols on jet Office 4632

  Try to configure the printer for a new wifi password that the % as one of the symbols. How can I enter to complete my installation?

  Welcome to the HP community @Marshliz,

  I understand you are trying to enter a special character in your wifi password to connect your HP Officejet 4632. I'll be happy to help you.

  There are a few different options to connect your printer to a wireless network. If you use the Setup Wizard from the control panel wireless, there is a virtual keyboard that appears on the screen and you may have to navigate through the different menus for the lowercase, uppercase letters and symbols. Below, I've posted a link to a document that has some instructions on how to configure your wireless printer. Please try all the steps in order and get back to me with the results.

• OfficeJet 4632: how to set the exact time display?

  We'll not duration displayed on the screen. How do reset you?

  Hey @desert_scene,

  Welcome to the Forum from HP Support.

  I understand that you're looking to adjust the settings of your HP Officejet 4630 e-all-in-one printer. I would like to help.

  From the front panel of the printer, use the arrow keys to navigate the printer menu. Select Preferences and then the Date and time. From there, you can make the desired changes and click OK to complete the setting.

  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• HP Officejet 4632 won't go online

  4632 HP continues to go in offline mode I feel. I can't find any dialog box to manually force it online. I could solve the problem of the two or three pages with the doctor of printing & scanning HP until today. Please tell me how to make my printer to remain online at all times. Thank you.

  Take a look at this link.

• OfficeJet 4632: ocr add on for my Officejet 4632

  HP offers an app of the printer for OCR for my printer?  I received an email earlier that seems to indicate that there is an app for that, but I can't find any information about this now. If not, is there an afordable after market program I can get for this purpose? I don't want to spend $100.00 for it.

  Thank you, Scott

  Hello

  Not directly at HP, it's a third party software called IRIS (or similar name). It's also very expensive. In many cases it is more expensive than the printer itself so that HP offers only high-end or more expensive printers.  There are some free software around:

  http://free-OCR-to-Word.en.softonic.com/
  http://www.free-OCR.com/
  
  for Word:
  
  http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx

  Please try and if not adapted to your need you can buy commercial software.

  Kind regards.