OfficeJet 4650: 0XB8000508 error Code

I get an error code on the front screen of my printer, 0XB8000508.  I'm not finding it in one of the forums.  I can get it to go away by turning the printer off and then back on.  But it has happened twice now.  Can you give me some answers as to what is this error and how to correct?

Hi gawright59,

I'm sorry to hear that your printer is getting an error code.  Here is a document that presents several of these errors and describes how to reset the printer when they occur.  http://support.HP.com/us-en/product/HP-OfficeJet-4650-all-in-one-printer-series/5447930/document/c00489814/

There are several error messages that come from the printer and there is no definition of what each of them average.  It is an indicator of an internal error in the printer State.

As you can see from the document - reset of the printer is the only step of troubleshooting for these errors.  If this error persists, you may need to replace the printer.  If the printer is under warranty I would recommend that you contact HP customer support (the link is in the above document) to set up an Exchange.   If the printer is out of warranty - continue to reset it for as long as retrieves the unit.  You can start shopping for another printer.

I hope this helps, and I hope that the error appears again.

Jean

Tags: HP Printers

Similar Questions

  • Ink system failure Officejet 6500 (no error code specified)

    Ink system failure Officejet 6500 (no error code specified)

    I have turned off the machine on again (and it doesn't)

    I turned off the computer and unplug the unit (and it does not fix it)

    Without specific error code I'm not sure what to do

    Hi CHCA. Your Officejet 6500 must be out of warranty? You can doublecheck the warranty status of your printer here: http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=ie & lc = on -if it is still under warranty, you should not pay for a new printheaad.

    But if your printer is no longer under warranty, you buy one a. The part that you really need to order an Officejet 6500, is CN643A. If you are in the United States, here are the HP part store page where you can order the new print head Assembly: http://h20141.www2.hp.com/HPPARTS/Search_Results.aspx?mscssid=C580393F30964EDD82B16A5C641BEC41 & Searchin' PartNumber = & SearchPN = CN643A

    If you are not in the United States, start from this page: http://welcome.hp.com/country/us/en/wwhowtobuy.html , specify your country and search for CN643A.

    Also, here is a support document that should help you with the replacement of the print head: http://support.hp.com/us-en/document/c01643079

    I work with HP but my messages and responses are mine.

  • HP Officejet Pro e-all-in-8610: HP Officejet Pro 8610 - error Code: "0xc19a0013" (printhead missing or failed)

    I bought the printer (e-all-in-one printer HP Officejet Pro 8610) in January 2015.  The printer was working properly - fax, copy and scan, until two days ago.  Now, it doesn't print at all.  Received an error code: "0xc19a0013" (missing or does not have the print head).  An expanded version of the error code reads: "the print head seems to be missing, not detected, or incorrectly installed.  Error: 0xc19a0013.   The printer uses a removable printhead, HP Ink cartridges (black) 950 and 951 (cmy).  I used the diagnosis of HP support recommendations: all software and firmware for this printer is installed. HP ink cartridges are not low or empty; remove the printhead ink cartridges and reinstall them.

    There are several steps in the recommendation of troubleshooting, but I stopped to lift the printhead.  Because of my technical inexperience, and there were too many ceveats (attention, attention, proper relocation and etc..)  with the removal of the print head which could cause problems more serious.  Then, I stopped to remove and clean the print head.  Also, used the doctor to Scan printer HP for assistance. Tool to clean the printhead does not.   What worries me most with the 0xc19a0013 error code is his explanation: the print head seems to be missing, not detected, or incorrectly installed.  I can use all the help I can get to understand what is happening with the error code that I received and the resolution of the printer malfunction.

    Contact HP technical support at the 800-474-6836 for more options.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.
    Language-country selector.

  • OfficeJet 6500 E709n: Error Code 4, [(3,14,0)}]

    I recently updated my Dell computer, but I'm still using Windows 7.  When I try to scan using my OfficeJet 6500 I get an error message immediately: "problem of access to files and resources on the computer.  Try the following steps.  After each step, try to scan the image: - restart the computer - reinstall the HP Photosmart software supplied with the camera, error code 4, [(3,14,0)}.] »

    I followed these steps several times but also reinstalled the whole full functionality of the software and the driver OJ6500vE709_Full_14.    I also installed Photosmart Essential 3.5, although I do not think that he should never before scanning.

    I uninstalled all associated HP OfficeJet 6500 products and reinstalled everything.

    When I used HP Print and Scan doctor to help out, everything seems to work properly.  I was finally able to scan a document ('test analysis') while the 11 steps of printing HP and doctor Scan.  Hiowever, as soon as I tried to use the HP Solution Center application to scan a document, the same error messages came.

    I am confused at this point, given that the doctor of the scanner helped me successfully to a test analysis using the normal HP Solution Center to do the same thing is not.

    Thanks for any help!

    I just re-read one of the earlier posts about a similar problem and noted the suggestion of the Expert HP to run CCleaner in the framework to get the software cleaned.  I just (belatedly) followed that advice and voila!  Everything works fine!

    Thanks for the earlier solution that helped me solve my problem.

  • HP Officejet Pro 8610: Error code problem with printer or ink system

    sent a fax Monday very well and now I'm going to use printer & fax to search for these words in the window:

    "There is a problem with the printer or ink system. Stop printer, then if the problem continues contact HP. »

    I had done this several times as well as other things that HP troubleshooting suggested.

    Hi @MrsQT,

    I see that you get an error on the printer or ink system and made the suggested troubleshooting already. I'd be happy to help and find a document for you to review to make sure that you have tried everything: HP OfficeJet Printers - resolve the error 'Problem with ink system'.

    If the problem persists, I suggest to call the hotline to see if you may be able to get a discount on a newer model, or replace your printer if it is under warranty still. HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

    If however the recommended solutions solve the issue please click on accept as Solution on this post so that others can find what worked for you.

    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on options contact HP - click Get phone number

    File number and phone number are displayed.

    I hope this helps.

  • HP OfficeJet 4650: How should I treat the error Code 0 x 80240017?

    Tried to install an update and received this error code.

    The steps of troubleshooting in the post here by @Rainbow7000 can help solve the error 0 x 80240015 after an update on your Officejet 4650 printer.

  • OfficeJet 4630: error code stampante hp officejet oxb3746868 4630

    error code oxb3746868 in the hp officejet printer 4630

    error code oxb3746868 in the hp officejet printer 4630

  • HP Officejet 4632: hp officejet with an OXC4EB827F error code 4632

    I have a hp officejet 4632 with an OXC4EB827F error code and does not work, also the power button blinks continuously.  Tried the reset how to print HP and doctor Scan and it did not help, there is no response from the printer.  Any help would be apprciated as two years out of warranty.

    Hello!

    Welcome to HP's Forums a great way to get help.

    Thanks for your post. I see that you have a problem with your printer "HP Officejet 4632" that gives you an error message "OXC4EB827F".

    It looks like a hardware problem with the printer.

    Please try this link on the HP forum is the author of X-23 an HP Forum Expert certified. There is a link for the same series of the printer, but not the exact model of printer.

    Link:

    http://HP.care/2bP97Dx

    If this fails, contact HP Technical Support for your printer using this link service:

    http://HP.care/2bGzo6g

    I hope this helps! Let me know how it goes.

    Take care and have a nice day.

  • HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

    "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

    HP has a center of service to Puerto Rico, where I live?

    Please tell me there is a solution for this problem.

    In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.

  • OfficeJet 7500 E910 model: 0x61011bed error code

    0x6011bed error code is displayed once the printer performs an impression and to enable again the printer requires a lot of button pushes on the display of messages of 'OK '.

    I have turned off the Officejet 7500, disconnected from the power, waited a minute, deleted and reinstalled ink tanks and the print head, sucked and bluff visible dust but still cannot make the mistake go away for very long, with usually error code return after printing (print or receipt of a fax).

    I perform the extra step or need of cleanup for more than just a job printing after the error code clears?

    An additional observation: If the print job is multiple pages, once started the Officejet 7500 completes the task, but is to begin after the error code displayed is the problem.

    Hey @pauledinger,

    Thanks for getting back to me on this subject.

    Because you also get a paper jam error, you can click here to access the paper jam good troubleshooting steps. Once the support document opens just review the Solutions proposed to ensure that no paper or debris is hidden in paper path in your product. Support document also guides you through the rollers for the cleaning of the printer. Regarding a paper sensor, you can not clean the sensor itself. In addition, if the sensor is defective, it is a non-replaceable part on this model of consumption of the product. Therefore, a replacement of the entire unit would be necessary.

    After the jam troubleshooting steps, please try printing. If the error persists, can please click you here to send last programming Firmware update to your printer. The Firmware is the "brain" of your printer and control that made your printer and how your printer it. If there is a corruption in the internal programming in your printer, it can cause performance problems. Your printer must be in a State of 'ready' to 'send' to update the Firmware of the product. If your printer indicates a status of error on the Panel until the firmware update will most likely fail. Once the firmware update completed test print to see if the problem has been resolved.

    If the error state persists after checking for jams and completing the update of the Firmware a replacement of the entire unit would be the next step.

    Please let me know if the troubleshooting steps I've provided resolve this error state. Good luck!

  • HP Officejet Pro X476dw. Message: problem with the printer or ink system. 0xc6fd0213 error code

    HP Officejet Pro X476dw purchased June 2013.  Windows xp operating system.

    Printer does not.  In a "print order" function, by modem or button copy to printer, gives me the error message: the printer failed.  There is a problem with the printer or the ink system.  0xc6fd0213 error code.

    Sometimes spits out a blank sheet of paper.

    Hi people, as @Bryan_P has said - Please contact the HP support by phone on this error message. The below listed phone numbers...

    http://welcome.HP.com/country/us/en/wwcontact_us.html

    Can you please post back to let us know how you go?

    Thanks, Ciara

  • HP Officejet 6500 more: Office jet 6500 more error Code 0 < 61011bec

    Switch on my HP Officejet 6500 more displays error code 0<61011bec.   does="" anyone="" know="" what="" this="" code="" means="" and="" what="" fix="" there="" is="" for="" it="">

    Hi RnRMusicMan

    Thanks for your help and the URL of the video.  The part ony of the video, which I have not tried is remove the duplexer and see if there's anything wrong with that part of the printer.

    Looking a little further.

    Bravo and thank you for your suggestions.

  • HP officejet 4255: error code

    Hi all

    I have hp officejet 4255 and error 0xf0af8005 code? Please help me

    Thank you elena_t

  • What is the fax 346 error code? OfficeJet 6500 a, Windows 8

    Is there a list of fax error codes and what they mean?

    There is a document with a list of the fax error codes located here

    It provides an explanation and a general troubleshooting for each error code, as well.

    I hope this helps.

  • OfficeJet 4650: Instant ink Error Message

    When lit the print request 'loaded document' press 'Yes' to the screen.  Screen flashes once then displays "[something that can not be displayed] instant ink cartridge" cartridge cannot be used until the printer is registered in * instant ink. "a blue light flashes on the right.  The screen can be scrolled but cannot be erased.  Printer is connected wireless and answers since 12/01/2016 to instant ink program and recorded three days of printing.

    It is apparent from looking at the computer on which the printer does not recognize that it is connected via the wireless.  Don't recharge not software due to the inability to access control panel.  I tried the fact to unplug the printer.  Normally, two computers can print to printer.  Or connects to the printer because the printer does not free Wi - Fi access.

    Problem number two: I tried to enter the following tags "4650, instant error of ink, screen lock"and received the error message "the message tags contains the letter H and the letter p" which he did not. "

    Contacted the instant ink, after two calls droped and 3 hours, they decided to printer was broken and sent me a new then called back to make sure it has been set up and logged onto the instant the ink account.  It may have taken 5 hours, but the problem has been resolved and I'm retired with a few demands on my time.

Maybe you are looking for

  • Calendars stuck app

    When I open the app calendars, it shows this message, and it stays there, making me unable to stop smoking. I can only force quit it. What should I do?

  • can I upgrade the ram on my mac pro retina 2015

    I have the macBook pro retina 15 ", medio 2015 2.2 Ghz i7, Yosemite OSX v.10.10.15 Can I upgrade the fra 16 GB to 64 GB RAM? Torben

  • Tab 3: 10 "Miracast Yoga

    I can't watch downloads on Sky go that enforcement continues to tell me that Sky go does not support Miracast - how can I turn off Miracast in my YOGA 3 10 tab"

  • Current Volume icons, network, disappear from the notification area.

    I know that microsoft has heard this problem many times that I read many forums to ask this question.I went to this link http://support.Microsoft.com/kb/945011and used the microsoft fix and it worked for a few weeks, but then the icons disappeared ag

  • The display of images on Scan disk memory card

    Scan disk memory card How can I get my pictures up when I insert my card memory ScanDisk from my camera. When I put it in my computer, it comes up with autorun and nothing else and my pictures do not show.