OfficeJet 4650: Need drivers

Similar Questions

• HP OfficeJet 4650: Problems installing driver HP OfficeJet 4650

  I can not scan with my printer. I tried to install the driver HP several times. Each time it is said that it has installed successfully.

  When I add the printer to the list on printing & scanning in system preferences, it finds the printer (because it is attached to my computer via a USB cable) but in the ' using Print:' section, automatically selects the generic printer PCL. HP OfficeJet 4650 isn't in the drop-down menu to select in this section. This means that there is a problem with the driver installation?

  I tried to uninstall the software, but I can't uninstall it, suggesting that it has not been correctly installed in the first place.

  What can I do?

  Hey @HPURCELL,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your machine of Mac OS x 10.7 printing to your 4650 e-all-in-one printer Officejet. What is happening is that the printer drivers have been installed for Mac OS x 10.8 or later. The installation program is running, but the Mac printer does not communicate. To scan, you will need to upgrade to Mac OS x 10.8 or later version.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP officejet 4650 output tray Extender fake message

  When you ask 4650 HP Officejet to print it comes up with a message "wait until printing is complete before pushing in the output extension tray" and nothing prints. The output extension tray is not yet released. I only had it a week, but I properly print docs of her. I tried the hard reset turn off to the sector for 60 s and realign the impression, the extension of the tray came out fine for this! Please advise!

  Hi @MarianneBritten,

  Welcome to the HP Support forum.

  I understand that you have a printer all-in-one HP OfficeJet 4650 do not print and displays an error message that says "wait until printing is finished before pushing in the output extension tray. I would like to help with that.

  I would like to start by making a power reset the printer.

  

  Once the power reset is complete, try to print a report using the control panel of the printer.

  1 load letter or A4 unused plain white paper into the paper tray.

  2. in the printer control panel, press Tools.

  3. press on the report on print quality.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• printer officejet 4650: unable to print emails

  When I tried to print emails yahoo, gmail and smartermail, the message asked me to 'save' and I can't find the button to print. Help, please. Thank you.

  Hi @WilliamLi,

  Thank you for joining the Forums of HP Support!

  I noticed that you are unable to print from your email to your HP Officejet 4650 printer accounts. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Gmail, Yahoo, and SmarterMail are web-based email clients which means that they are using a Web browser.

  It seems that the printer is not selected in the print dialog box. Please ensure that you select your printer. Otherwise, it could use a PDF or Microsoft OneNote Driver, printer etc.

  Are you able to print from MS Word, Notepad, or WordPad?

  In the meantime, I would reset the settings of your browser to see if that solves the problem.

  Reset the settings of your Internet Explorer browser

  1. Close all Internet Explorer Windows or Explorer Windows that are currently open.

  2. Open Internet Explorer by clicking the Start button. In the search box, type Internet Explorer, and then in the list of results, click Internet Explorer.

  3. Click Tools and then click Internet Options.

  4. Click on the Advanced tab, and then click Reset.

  5. Select the check box delete personal settings if you want to delete the browsing history, search providers, accelerators, home pages, and InPrivate filtering data.

  6. In the reset Internet Explorer settings dialog, click Reset.

  7. When Internet Explorer finishes restoring the settings, click Close, and then click OK.

  8. Close Internet Explorer.

  Source

  Reset the settings of your Firefox browser

  1. Type Subject: config in the address bar and press ENTER. A list of preferences appears.

  2. Find the preference Print.print_printer (Note: this preference is missing in Firefox profiles where you have never used the printer.)

  3. (Right-click contextual) right-click the preference and select Reset . (Some users may need to reset all the ) ( Print.Printer preferences for a particular printer, if this master preference reset does not solve the problem.)

  4. Restart Firefox and see if the problem is resolved.

  Source

  Reset your Google Chrome browser settings

  1. In the upper right corner of the browser window, click on the menu of the Chrome Chrome

  2. Select settings.

  3. At the bottom, click Show advanced settings.

  4. Under the section "Reset settings", click on reset.

  5. In the dialog box that appears, click Reset.

  Source

  I hope this helps. Please reply to this message with the results. I wish you a nice day!

• OfficeJet 4650: 0XB8000508 error Code

  I get an error code on the front screen of my printer, 0XB8000508.  I'm not finding it in one of the forums.  I can get it to go away by turning the printer off and then back on.  But it has happened twice now.  Can you give me some answers as to what is this error and how to correct?

  Hi gawright59,

  I'm sorry to hear that your printer is getting an error code.  Here is a document that presents several of these errors and describes how to reset the printer when they occur.  http://support.HP.com/us-en/product/HP-OfficeJet-4650-all-in-one-printer-series/5447930/document/c00489814/

  There are several error messages that come from the printer and there is no definition of what each of them average.  It is an indicator of an internal error in the printer State.

  As you can see from the document - reset of the printer is the only step of troubleshooting for these errors.  If this error persists, you may need to replace the printer.  If the printer is under warranty I would recommend that you contact HP customer support (the link is in the above document) to set up an Exchange.   If the printer is out of warranty - continue to reset it for as long as retrieves the unit.  You can start shopping for another printer.

  I hope this helps, and I hope that the error appears again.

  Jean

• OfficeJet 4650: Officejet 4650 slow copy

  Copy takes MINUTES. Fine - print scans well.  Resolution of 200 DPI. Plugged directly into the wall. Software up to date. Hard reset is complete.  Problem started in the last weeks 1-2. Purshased February 2016.

  Hey yanoman,.

  Welcome to the Forums of HP Support! I see when you make a copy on your HP Officejet 4650 it is really slow.

  I would like to you allows alignment on your JO 4650, does that help?

  If you are unable to get a good speed of copy, please contact our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  This aid?

  Just say thank you, please click the ' Thumbs Up ' button. If you need more assistance let me know and I will gladly do whatever I can to help.

• OfficeJet 4650: initial configuration

  I used the disk for the implementation of directions, but nothing appears on the momnitor. When I enter 123.hp.com/setup to get directions all that I get is this discussion forum. I'm simply looking for guidance on how to connect the printer to the computer.

  Hello

  You will need to select the correct printer as default.

  Here are the steps to do:

  1. go in Control Panel

  2. under hardware and audio

  3. click on "view devices and printers."

  4. right click on your printer Officejet 4650

  5. go to "Set as default printer" and make sure you only select the printer that is NOT a.

  An example is shown here.

  

  Hope that helps.

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• HP officejet 4500 wireless: hp officejet 4500 wireless drivers are not on the hp Web site

  I was able to print but I couldnot scan so I removed the printer and tried to reinstall the drivers and there is no where.

  I am looking for hp officejet 4500 wireless drivers on the hp site, I found the link click and nothing that just a blank page appears.

  I'm going on another site and find the drivers, I have download the exe and try to run it and it says "corrupted file".

  Can you please send me the link to the drivers? I really need to print!

  Hello

  Try to download the drivers from the following link:

  http://ftp.HP.com/pub/softlib/software12/COL32439/MP-109545-2/OJ_AIO_4500_G510n-z_Full_Win_WW_140_408-4.exe

  Please let me know if this is useful,

  Shlomi

• HP OfficeJet 4650: HP utility does not connect to my new portable printer HP OfficeJet 4650 of my connected USB MAC

  Utility HP does not connect to my new HP OfficeJet 4650 of my Mac connected usb portable printer.  I have to turn off the printer, printer and try again sometimes that works.

  Welcome @grizley1967.

  Thanks to their participation in Forums of HP! I see by your post that the HP utility connects to the printer. I will definitely do my best to help you.

  Make sure that the printer is connected directly to the Mac with the USB cable.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Open disk utility.

  Select the startup disk in the list of volumes.

  Click the first aid tab.

  To verify permissions, click on verify disk permissions. To fix the permissions, click on repair disk permissions.

  Restart the computer.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• need drivers apple mobile device (recovery mode)

  can not restore ipod touch need help please

  Hello. You don't need drivers to use recovery mode. You must launch iTunes on the computer, and then connect the device using the USB cable.

• OfficeJet 4650

  I did use Easy Scan to scan documents on my computer until this week. I have an Imac and last week installed Sierra on the Mac. The message I get is

  HP OfficeJet 4650 series [C5F08A] is currently unavailable. Please check if it is connected and turned on, or try again later.

  The printer is wireless connected and working.

  Help please!

  Hi @Froglady16,

  Thank you for joining the HP Forums!

  I noticed your post that you can not scan with your HP Officejet 4650 on Mac OS X 10.12 Sierra. I'm happy to help you!

  Please try the steps outlined in this guide, Network Scanner connection is lost (Mac), along with this guide, the printer Scan fails or impossible to scan allow (macOS Sierra).

  If neither guide solves the problem, Contact HP support for help. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Need drivers for Win98 for Satellite L100 113

  Hello peaples! I need drivers for L100-113 for MS Windows 98... Thank you!

  Unfortunately, you will find not all original Toshiba for Win98 drivers for this device.
  I have goggled autour and it seems that this laptop has been delivered only with Win XP and that is why drivers are not available.
  In addition, the Win98 is a very old operating system and Satellite L100 is designed several months ago. No one is using the Win98 on this laptop. Everyone wants to install the new Vista ;)
  I n t want to dash your hopes, but I don t think that Toshiba will create the Win98 drivers for this laptop.

  What you can do is to check the net for different drivers that might be compatible with devices portable single... good luck

• Need drivers Windows 7 for Satellite R10

  I have Toshiba Satellite R10
  I need drivers for Win7
  Video controller & unkhnon compataple with win7 driver

  Satellite R10 is old enough for laptop and I do not think that you will find the Win7 drivers.
  I'm not 100% sure but I think it's the Canadian cell phone model. I have checked the Toshiba Canada support page and I saw that this laptop is supported for Windows XP Tablet edition only.

• Need drivers for my Dynabook CX1/214LE

  Hallo all.
  I have Dynabook CX1/214LE model Portege 4130 series.
  I need drivers for the new facility. Where is possible to download? On the Web from Toshiba site are not.
  Thank you

  Hello

  You must understand that there is not some sort of Toshiba global support and download page. That is why if your laptop is designed for the Japanese market so only is this laptop backed on to the Japan Toshiba support page.

  This laptop model is not available in Europe, and you won't find drivers on European support page. So either try to use drivers for some similar Portege model or directly check the download page for equipment manufacturers.

• Need drivers for my Satellite A200 PSAf3A 0QH01N

  Hi I formatted my laptop Toshiba A200 Satellite with Windows VISTA Home & finding it very difficult to find the correct drivers.
  I phoned the helpline and was the tool to download the "Toshiba Service Station" program that will automatically detect the drivers & update the missing drivers.
  I installed it and it did not detect the missing drivers.
  In Device Manager it lists,

  • Standard VGA graphics card
  • Ethernet controller
  • Mass storage controller
  • Video controller

  Need drivers, help or advice is greatly appreciated.

  Hello

  Satellite A200/QH0 PSAF3A-0QH01N has been published in Australia, but unfortunately, I could not find the drivers for the old A200 series on Australian pilot site...
  But the A200 series came out in Europe too.

  The drivers for the pieces of equipment must be compatible, even if the model number is different.

  So I recommend you visit the page of the Toshiba UE driver to get the drivers for the A200 series
  http://www.Toshiba.EU/innovation/Dow...ivers_bios.jsp

  Here you must choose: Archive-> Satellite-> Satellite A-> Satellite A200 series

  A tip: check this doc HOWTO that would help you to know which device requires a driver.
  https://Forum.Toshiba.EU/showthread...unknown-device