Officejet 5610 all-in-one printer has been installed and is not printing... Please help... :))
Officejet 5610 all-in-one printer has recently been installed (I had printer for 4 years) and now does not print...
Hello
1. you remember to make changes to your computer?
2. you receive error messages when you try to print?
Try the steps in the following article: printer in Windows problems http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
Tags: Windows
Similar Questions
-
HP Officejet 5610 all-in-one printer have something that can be attacked by a virus?
I have a "HP Officejet 5610 All in one printer" running Windows XP Home edition (32 bit).
I tried to print a file that I had been sent and the printer began to print very slowly (one line / 5 seconds). At the end of the document, which had been printed was a load of rubbish! The next print was ok and printed at normal speed. BUT now, whenever I try to "Scan" a document using 'Microsoft Scanner and Camera Wizard', the 'Wizard' can take up to 1/2 hour to load when it is used for the scanner. If used for the camera the Assistant immediately.
I downloaded and installed the latest HP drivers and still have the problem.
Is there something inside the printer [ROM?] that can be attacked or is this a rare case to be an error of 'material' with a four year old unit. It is interesting to try to have it fixed or can I get a new camera? If so, which is recommended for a system of "consumption"? -Many thanks.
Hi Semajleep,
I would recommend printing HP and the Scan Doctor running. It is a quick and simple tool that diagnoses and solves many problems of printing, scanning and connectivity. See the link below for more information on how to download, install and run this tool:
I would like to know if this helps or not.
-
Uninstall problems w/HP Officejet 5610 all-in - One Printer
I have a Dell E510 desktop on which I've recently updated my printer to a printer wireless HP Photsmart 7520. I am running Windows 7 32-bit professional, an Intel Pentium 4 3.0 GHz CPU with 4 GB (usable 3.24) RAM. The new printer worked for about two weeks, but developed problems. The previous printer, a HP Officejet 5610 all-in-one, began to send me questions, so I removed it, or so I thought. The physical device is out of the system, however, I can not uninstall the software. I tried to uninstall using the uninstall feature, nothing helps. I tried to use the feature to remove programs from the Control Panel, also to nothing does not. These tasks have been tempted both before and after the physical removal of the device.
I keep getting error messages about the file being on a network that is not available. When I opened the printers and devices, the HP 5610 printer keeps appearing, no matter how many times I 'remove this device '. I believe that the two software are conflicting with each other. Does anyone have suggestions as to how I can remove the printer HP Officejet 5610 to my system?
Thanks in advance for your suggestions.
John C. Morgan
Hello jmorgan884,
I would like to offer a suggestion to uninstall the printer HP Officejet 5610 on your Windows 7 computer. I recently needed to tear a program on my computer and had problems as well, I was finally able to uninstall the software using Microsoft Fixit.
This application is compatible with your operating system, free and very easy to use. I would like to know if using the Microsoft Fixit allows to remove the software.
The problems that the programs cannot be installed or uninstalled
Thanks for posting
-
Problem printing HP Officejet 5610 all in one printer
Your Question: lately I got a printing problem documents and the printer 5610 has quite wierdly. Sometimes I see my printer name as the default name at other times that I can't find. When I try to add, I get a message Windows can't open add printer. Local printer spooler service is not running. Restart the spooler or the machine. Sometimes I run a malware software and restart the computer, the printer is connected automatically but sometimes I can't find the printer. Strangely, when it's not printing yet I can scan documents to the printer on my computer. Help, please.
Sorry you are still having this problem. I see that you have an error in the spooler. This usually converts with a problem of Windows itself.
Here is a video that can help you with the problem.
http://www.YouTube.com/watch?v=MgHpoNZgbvQ
Let me know if it helps.
-
HP officejet 5610 All - in - One P: HP officejet 5610 all-in - One Printer
My printer was working fine until we tried to install another printer.
My printer has disappeared from my list and so I reinstalled the drivers and rebooted and still I can't find my printer on my pc.
When I open the solution center it indicates that the HP Solution Center cannot run because your installation of the device is not complete. I proceed with the installation.
Hello
See the link below to fix the problem.
-
Officejet 5610 all-in-one printer
Runs on Windows Vista,
The printer now works well for the past 5 years, all of a sudden he wants to reinstall the printer and drivers almost after each reboot.
I went to HP down load updates with no success.
Thank you
I disabled the HP Cue Discovery Service and I think that fixed my problem. Thank you
-
I tried to reinstall the software and drivers for my HP Officejet 5610 all in one printer, but when I start the installation process on my notebook (Windows 7 64-bit) a window appears and says that it cannot find the specified file. I download the sofware and complete player file but for some reason whenever I try to install this same error window opens and I can't complete installation. The error log says the file not found X:\hpzsetup.exe source. Any body to meet this problem and if you have how can I find a way to install the HP Solution Center. My printer works fine, but I do not have the scan software. Of suggestiuons or ideas are appreciated.
Thank you very much for the link to HP Scan range. I downloaded and installed and it works fine. Just as good as what I had in the HP Solution Center. I really appreciate your help
-
Driver download for my HP Officejet 5610 all-in-one CAN´t
Hello!
I have can´t not seem to download the driver for HP Officejet 5610 all-in-one printer!
When I click on the download button, it checks the size of the file but it doesn´t pass here!
I really need this driver for my printer!
What operating system and version on the computer? Have you tried to download another computer (on a USB key)?
-
HP officejet 5610 all-in-one does not print one when it does print a map from 2 months ago.
Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago
Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago
Who is this? Do not print or print the old data?
Under what circumstances does the former print job print (for example, after restarting)?
Follow these steps:
Open a command prompt window (start > run > cmd > OK)
Type the following command and press ENTER after each line:
net stop spooler
del "% windir%\system32\spool\PRINTERS\*.*" [Y when prompted type]
net start spooler
output
-
Failure of the alignment of cartridges HP Officejet g55 all-in-one printer.
Please notify. Thank you.
If you use cartridges done the alignment fails, you must use only the HP cartridge on HP printers.
-
printer hp officejet 5610 all-in-one
my hp officejet 5610 all-in-one does not not with my window 7 worked before the ideas of how to get it online
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help -
HP 5610 all-in-one printer: printing problems from the internet
my printer Hp 5610 all in one printer don't print properly on the internet, bold text is readable, any type is barely legible, and in some cases, unreadable. I have downloaded and run the hp print and scan doctor and followed touble shooting recommended changing usb ports and a different cable that has not solved the problem. The drivers have been updated and installed. The printer works well when you print files. I also changed ethernet cable which had no effect. I deleted and reinstalled the printer several times and still no results. I noticed this problem in the forums with different printers and systems, but I have seen no resolution for any of them. I'm open to suggestions to solve this problem.
Hi @mikiev,
Welcome to the HP Forums!
I see that you experience printing problems when you print from the Internet, with your HP Officejet 5610 on Windows Vista. I'm happy to help you with this printing problem!
A few questions for you, if you don't mind:
- What is the name of the web browser that you use to print from?
- What happens when you print from Notepad? You get the same quality print or better?
In the meantime, I suggest go through this guide, Faded or dull in print colors. Also, I would suggest trying to print from another web browser. Such as: Firefoxor Google Chrome, etc.
Thank you for posting!
-
I used Cartriege world genuing HP ink cartridges refills for the past 3 years. These cartridges are about 3 months charging sine and worked very well. I just print a page and then got the above message for the first time. Any help?
Thank you
lurcher1
Hello @lurcher1,
Thank you for visiting the Forums from the HP Support! I see you are using cartridges refilled with your HP Officejet 5610. You have always used refilled cartridges, but now you've found a cartridge error.
I would like you to start troubleshooting here: 'incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series
You will notice Solution: use genuine HP cartridges :
'HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no could not solve your problem of print quality. »
To get a better understanding to take a look at the documents below:
Can I recharge the ink in my HP ink cartridge?
&
HP vs reloaded cartridges inkjet print cartridges
I hope this helps, if you still get the error message after replacing authentic ink cartridges, I suggest you contact our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!
-
OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7
THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.
I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.
Hey 123 problems,.
You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:
http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
HP Officejet 4500 All - in - One Printer - G510g 8.1 windows installation 64 bit
After running a HP Officejet 4500 All - in - One Printer - G510g two an old notebook Windows XP and 64-bit computer laptop, an ASUS Windows 8, subsequently updated article 8.1; I am now trying to install it to run from a laptop Toshiba Satellite NB10T-A Windows 8.1 64 bit, but without success.
The original installation CD does not provide an installation but start up (probably because it is only compatible with Windows XP and 7.
The site www.hp.com offers a download a driver for the printer to Windows 8,162 bit. Sounds to download very well. Unpack the file, said he set up, but in the end, the driver is not available.
There is no option to uninstall, in Control Panel of configuration/Printers/software control panel.
Without that driver, the system Windows 8.1 recognizes the printer and allows the simple printing applications of ffrom. However, it is not possible to use scanning options, which gives the error message that the driver is not available. HP or HP Document Manager Solution Center are installed.
I tried printing HP and doctor Scan. It recognizes the printer on USB link, said that lack of drivers, downloads, unpacks and installs the drivers. But the printer icon in the control panel of configuration/Printers continues to have an alarm icon indicates that the printer is still missing drivers.
I also tried installing HP Printer Wizard. The result is similar.
Please tell us how I can install this equipment scanning options and make sure that the machine is compatible with 8.1 64-bit windows.
Thank you
Dear Rainbow 7000.
Thanks for your help. I tried following your instructions - remove all files HP, starting in minimal mode, downloading and installing new. Also tried to disable the antivirus scanner. But in vain. The drivers scanner has not been installed.
The 64-bit Installer driver downloaded, but did not complete installation despite the night running. Looking at the processes running in the Task Manager, the name of the installer is for a 32-bit Installer (see the screen attached capture). Could be the problem?
After trying various alternatives to the procedure, I gave up and downloaded the base driver HP Officejet 4500 m G50g Corporate Edition 14.0 (link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110155-1&cc=pt&dlc=pt&lc=pt&os=4158&product=3919449&sw_lang= ). This download is recommended only for the professionals, which I am not - but nothing worked.
This driver installed fine. He recognized the printer and scanner. The printer and the scanner properly. The menu shortcuts also work as previously.
It looks like so there is something wrong with the installer 64 bit full feature software and driver. The solution for the other wil the same problem is to try the base driver - although it is for the professionals.
Thanks for your help, and I hope this will help other users.
Have a happy new year.
-------------------------------------------------------------------------
Screenshot of the name of the installer:
Maybe you are looking for
-
Disable the automatic reactivation after opening of the screen
Hello is it possible to disable the automatic reactivation after the idle state by opening the screen? If so, how? GreetingsMr. Auer
-
I need to acquire images from a camera to ac2000-340 km from Basler with PCIe-1433 camera link interface. Rate is from 300 to 340 fps, but especially, I can't afford to drop any blocks or for the rate to fall because post-processing analysis requires
-
Hi guys! I am writing here after many days of attempts without success... My request is 'simple', send data from the Panel of Labview RT within a DMA FIFO target host. Then the FPGA core receives data and imported through a knot of VHDL processes, an
-
the options window - when I insert a vacuum, music, or DVDs, no more rises, this occurred because of a windows update, example I insert a blank cd - a window used to come to ask me "what I want to do" with options - like opening a folder accessible i
-
Keyboard shortcut for full screen
In the guide of the function, it shows a keyboard shortcut for full screen: SHIFT - F / F11 / full screen toggle CTRL-command-F (all platforms / Windows / OS X) I'm under Win10, and F11 does not work for me (or SHIFT - F). When I hit F11, it penetra