OfficeJet 6000 E609n - Wireless concludes SSID and secure network but will not connect

I use Mac OS 10.5.8. I installed the printer for USB and went to the next step to configure wireless. My secure network, it obtains the SSID and then asks the WPA personal password for the network. I enter this and click on continue and the message comes back, "the Wi - Fi network selected «...»» ' is not within reach of the unit. ' Button choices are 'Change network' or 'Retry '. Despite attempts unsuccessfully repeated. However, I scanned for other networks and found a secure and connected to this network. Go figure. My router is sitting on my desk next to the printer. The router is a D - Link DIR-655 n I'm on cable for ISP services. When I first bought the printer, we were away on vacation, and I've successfully added to my Mac laptop. I have reset the printer found in the then successful and user guide to establish a connection to the House, with the unsecured network (I don't live in a condo so no idea whence the other network). Thank you.

You can try to update the firmware on your router.  Some of these models have had problems with HP printers and Netgear was subsequently fixed it with a new version of the firmware.

Tags: HP Printers

Similar Questions

  • Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

    The title says it all really.

    I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
    Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
    Help, please.
    Thank you.
    original title: vista detection network but will not connect

    Hi JulianBeach,

    1. you have made no changes to the computer before the broadcast took place?
    2. What is the exact error message you get?
    3 is connected to the domain of the computer?
    4. what happens when you try to connect to the network?

    Try the steps from the following link:
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Additional information:
    Wireless network card: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • KB960859 and downloaded KB970430 security updates but will not install, error Ox8007F01E

    security updates KB970430 KB960859 AND toward the down loaded but will not be installed for several weeks now, the code error Ox8007F01E how to install these - what I should do.

    Original title: error Ox8007F01E

    Hi krashprone,

    Did you perhaps try downloading directly to install?  Please take a look at the link here for KB960859 and here for KB970430.

    Please let us know.

    Thank you!

  • Some songs bought on Itunes and add them to an existing selection. They appear in the playlist and on computer but will not be synchronized to the Iphone. Help, please!

    Bought a few songs on ITunes and add them to an existing selection. They appear on the computer and in the playlist, but will not be synced to an existing selection on the IPhone 6. Help, please.

    This is the computer on which the phone is synchronized, and playlist is selected on the tab music from the phone to synchronize the phone? If the 'sync' button is not a copy the playlist update on you have tried to make a change on the screen of synchronization (for example in selecting/disable-selecting a playlist and sync and then get back on your original selection and re-sync)?

  • Need help creating Unique SSID and secure network

    My AP has been recently reset the SSID I had chosen has of course been erased and AP is now considered to be "linksys". It also now broadcasts as an open network.

    I tried to create a new network using the Intel PROSet/Wireless graphical user interface that came with my PC and it allows me to create a SSID and put a password on it, but it does not affect the real "linksys" network even if I would have erased "linksys" in the text box and enter my own.

    I tried in vain to reset the AP again and connect to 192.168.1.245 using IE and firefox, I get an error loading page every time. I have also tried to set the IP address of my PC to the same meanings and the subnet by default 255.255.etc and could not connect.

    I also tried to connect the AP to the pc directly, what does not work.

    What I am doing wrong.

    PS. I don't have the original installation CD, I think it would be solved.

    I managed. Thank you!

  • My IPad is connected to the WiFi router but will not connect to internet. My Internet works on my IPhone and Mac Book

    Since last night, my IPad connecting to my WiFi router, does not connect to the internet.

    Internet connection works for my IPhone and MacBook.

    Hello

    Go to settings resets the network settings on iPad.

    After reset, enter your key wireless router.

    See you soon

    Brian

  • HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

    I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

    Hi @lelg,

    I understand that you want to configure the printer on the wireless network. I can help you with this.

    Uninstall the printer software.

    Uninstalling the printer software.

    Restore the default settings of the printer.

    Go to Configuration, restore the default values.

    Cycle power to the router and the computer.

    Run the installer on the printer wireless.

    Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

    Print a configuration page to get the IP address of the printer.

    Print a Configuration report.

    Select the method.

    If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

    If it loads the page from the network printer then the printer is on the network.

    Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

    Select your operating system, click Next and click on the software to download and install.

    Test the printer.

    What operating system do you use? How to find the Windows Edition and the Version on your computer.

    Please provide detailed results if you're still having problems.

    Good day!
    Thank you.

  • My recently downloaded Windows Media Player 11 play dvd, audio cd and cd rom, but will not recognize two photos of the dvd which have been able to acknowledge by Media Player 10 and record of the Explorer Windows-with some difficulty

    1. Windows Media Player 10 has opened a photo successfully dvd but a message "Microsoft has encountered a problem and needs to close" came on the screen several times.  Had to re insert the dvd picture, but it would open again each time.
    2. Tried the cd drivers and troubleshooting dvd and was informed of my dvd could not be played because there was no decoder for dvd.  Following instructions and chose a windows xp approved decoder pack download - dvd has chosen the Roxio CinePlayer DVD Decoder Pack.
    3. Then upgraded the media player to Windows Media Player 11.
    4. After that, dvd and cd rom could be opened by the media player 11, but neither the DVD or cd ROM readers would recognize the photo DVD in question had been inserted into one of these discs, and even less to be opened by the media player.
    5. Program scanner and photo used to transfer my photos printed digitally on a dvd are trademarks of Hewlett-Packard.  Contact the center of the photo, but they could not provide me with any guidance or even particular HP photo program they used to create the dvd picture.  I remember the photos were stored on the dvd in JPEG format picture and was able to open by Windows Explorer before I've updated since WMP 10-11.

    "" I remember well, the pictures are stored on the dvd in JPEG format picture and was able to open by Windows Explorer before I've updated since WMP 10-11 ""

    Looks like you have a data dvd, which has just the pictures on it and it will not be seen by WMP, who needs a dvd-video disc.

    It should always open in windows Explorer and you should be able to see your pictues it.

  • Windows activation - new hard drive and reinstalled Windows, but will not work with the product key

    Hi all

    My hard drive died so I put a new in and installed Windows on a drive, but when I have just activated and put my product key does not work. In fact, I get this day by putting in and then it says character not aloud.

    Please can someone help? All I've done is put a new hard drive in but guess that Windows detects that the product key has been used on the old, which explains why it won't work on the new. What should I do to activate the key?

    Thank you

    Richard

    Thanks a lot for your useful replies. I've got in contact with Microsoft and they gave me a key and it worked!

    Thank you

    Richard

  • I have a Wireless N card and the router, but only to connect to wireless-G speeds

    I just got a new HP DV7T with a N (with bluetooth) wireless card: Intel Centrino Advanced - N 6200 AGN

    I use a Netgear wireless router (WNDR3700) double radio.

    My wife's cell phone can connect to the router with a N Wireless card at a speed of 170 Mbps.

    My laptop can connect only to 54 Mbps. I checked that I am connected to radio N of my router (the radio of G/B/A has a separate connection).

    I found a useful post here:

    http://h30434.www3.HP.com/T5/wireless-Internet-and-home/wireless-does-not-seem-to-connect-at-802-11n...

    I followed the advice of responses and checked all the settings of the router (but the success of my wife to connect at speeds N essentially rules on the router) and checked the settings of the adapter to make sure it helped N.

    I wonder what it is that I'm missing. Any suggestions would be greatly appreciated.

    Thank you.

    I was able to determine the problem after extensive web searches.

    I was using the WPA-TKIP authentication which, in some cases, prevents the speed N Wireless.

    Once I changed WPA2-AES authentication radio N I got immediately 300Mps speeds and it varies between 240-300Mbps now.

    I hope this will help others with the same question!

  • I have a sony VAIO Windows 7 laptop and I am trying to connect to a printer wireless photosmart D110a of PH. It will not connect, HELP!

    My VAIO gives me a list of printer/scanner/copiers, but mine is never on the list.  Enter the name of my atest printer page and.  all I get is about 25 pages of gibberish.

    Can anyone help?

    You install the HP printer according to the instructions from HP to help the software HP, or the installation software CD-ROM full on HP website, specific to the version of bit of the victory

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=4023246#n187

    You do not use the Add Printer Wizard

  • Wireless card detects WLan but will not connect to them - Satellite U300-111

    Hi all

    I'm in a mixture with a problem which I hope I could get a help from you all.

    My problem is that my wireless card detects networks wireless next to my laptop but when I try to connect to one that it doesn't connect at all. Even to my own wireless network.
    There is nothing wrong with my wireless network I got connected and tested several devices wireless Conect to it.

    Hopeing to get some sometimes you all on how to solve this problem.

    MY LAPTOP IS A TOSHIBA SATELLITE U300-111
    BOUGHT IN THE MIDDLE EAST
    MY WIRELESS CARD IS: INTEL (R) WIRELESS WIFI LINK 4965AGN
    THE DRIVER VERSION IS: 12.0.0.73
    WINDOWS VISTA 32 BIT
    SERVICE PACK 1

    Thank you

    H

    Reboot the router and try to establish connectivity again.

  • HP Mini 2102, wireless detects networks but does not connect

    Hi, I have recently reinstalled Windows 7 on my HP Mini 2102, downloaded this driver
    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 32...

    I tried to reinstall, but it still does not work.

    Finally solved the problem, I ran CNettoyez and deleted the registry who have not been used, worked like a charm and now I can connect wirelessly.

  • WAP300N and the iPhone 4 will not connect not

    I have access point WAP300N. All my devices detect the wireless network (iPad, iPhone 5, Experia Z3). But I also have an iPhone 4 (iOS 7.1.2) and this device is not able to find the wireless network. Can someone advice me what to do?

    Thank you!

    All devices of 5 GHz and 2.4 Ghz Iphone 4 it is only 2.4 Ghz.

    Your access point is configured to operate in 2.4 Ghz and 5 GHz or 5 GHz only? Because if the AP work only 5 GHz, which can cause on your Iphone 4 not able to SEE the wireless network.

    Thank you.

  • CD rom plays music and games ok, but will not play the videos dvd. It is slimtype dvd cdrom dvdcdr Ad53a35scsi

    Hpoefully can someone help me

    You probably do not have the adequate software. This isn't for lack of the drive if you don't have the appropriate software that can open DVD movies. In my view, that the latest version of Windows Media Player has this ability. Try WMP and open the DVD player.

Maybe you are looking for