OfficeJet 6310: Difficulties installing my OfficeJet 6310

Similar Questions

• DeskJet 3632: Difficulties installing printer DeskJet 3632

  When you try to install my printer, I get this message: Driver Package Installer returned error 32 for package C\Program HP HP DeskJet 3630 series\Driver 16 Store\Yeti\hpygrid inf.  A component of the driver in the driver DIF store package is locked by a thread or process.

  Hi @SheilaAnne,

  Welcome to the Forums of HP's Support. I understand that you are getting a call to the package of pilot error, when trying to install your printer. I would like to help.

  Please see the post from SuperMario1.

  Call for Driver Package Error - nine possible Solutions which have solved this problem!

  If you have any questions or need help made me know.

• having difficulties installing acrobat on microsoft surface pro 3

  try to install Acrobat pro DC on a surface of MS pro 3, and get an error message that says.

  Error encountered

  Error 1920 print spooler (Spooler) Service could not start.  Make sure you have sufficient privileges to start system services.

  Hi bretth75389198,

  In light of this error, I would suggest that you please check out the link below KB doc:

  https://helpx.Adobe.com/Creative-Suite/KB/error-1920-service-print-spooler.html

  Please let me know if it is useful in your case.

  Kind regards

  Ana Maria

• difficulties installing Acrobat 7

  My copy of Acrobat 7 was not letting me activate it online because it is so old. The chat tech support person gave me a link to download a different version. The installation goes well, but then, at some point, I get the error message below. The only option is to ignore but the next screen, I get another error, and the only option is to try again or cancel. Retry does nothing and cancel all stops the installation. Two different directories means the error are not in the folder. Any help would be greatly appreciated.

  

  This person had the same problem. see if the same solution works for you, error 1310. Unable to update / repair / install

• Vista - Unabel to install SP2 because he does not see SP1 is installed

  After difficulties installing service pack 1 update then tried to install sp2 and it seems that sp1 is not running what I do

  * original title - after installing sp1 don't run *.

  After difficulties installing service pack 1 update then tried to install sp2 and it seems that sp1 is not running what I do

  Try to post on Windows Vista IT Pro. Forum service packs:

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Problem installing Microsoft Visual C++ 2010 Express

  Recently I had difficulties installing programs. I'm on Windows 7 64-bit. Today, I tried to install Microsoft Visual C++ 2010 Express with disappointing results.

  I went through the installation, and it says that the program has been installed successfully. However, I could not locate the program to open it. I ran a search that returned no results. The start menu did not light up like it normally does when there are new programs. I looked in the start menu > all programs and there was a folder titled "Microsoft Visual Studio 2010 Express. The folder was empty.
  I went into C > Program Files (x 86) and I saw different folders containing additional files for the program. I finally found what I believed to be the program itself, "VCExpress." I double clicked and the start screen for the program came, followed by an error message indicating "folder data Application for Microsoft Visual C++ 2010 Express could not be created." I tried to run as an administrator, and the error message says "the application cannot start."
  If I try to re - install, it says that it is already installed. I uninstalled via Control Panel > uninstall program and re-installed several times with the same results. I had similar problems with other programs, and they all seem to be Microsoft programs.
  EDIT: The problem seems to have something to do with my AppData folder. When I go to C > users he's not here, but if I try to create a folder with that name, it says there is already a folder with that name.

  Hi Viteminj,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description provided, looks like you are facing a problem during the installation of Microsoft programs.

  He would be grateful if you can answer this question in order to help you further.

  1. have you made changes on the computer before this problem?

  2 are you getting any error message or error code during the installation of programs?

  3. how you try to install Microsoft Visual C++ 2010 Express using web download or disc?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer: http://support.microsoft.com/kb/2438651

  Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/program_install_and_uninstall

  Reference:

  Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-IN/windows-vista/Troubleshoot-installing-or-uninstalling-programs
  There is place for windows 7 as well.

  Notes:

  Clean boot: once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Default folder Appdata is hidden I suggest you view the folder option and check if it helps.

  Reference: http://windows.microsoft.com/en-US/windows7/Show-hidden-files

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Cannot install updates on Windows 8. Error code 8000FFFF.

  I would be extremely grateful if someone could help me with my problem, as I am about to throw my laptop out the window.

  I've always had difficulties installing updates for my windows laptop 8 (came pre installed with windows 8) current updates that will not be installed are KB2822241, KB2779444 and KB2871690. When I try to install using windows update I get 8000FFFF error.

  I tried on the advice of this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/Windows-Update-error-8000ffff/bd636398-1B34-4270-8693-4c5ad2c5af5e

  but he did not make a difference.

  Thank you very much for your help!

  Apologies for the delay in response.

  Have you checked if the problem persists in the boot?

  You can try to install the updates in the new user account and check if it helps. If the problem persists, I suggest to make the updating of the system and check.

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Note: Apps you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

• Flash Player won't install no - OSX 10.9.5 w / Firefox 34.0.5

  I know this question has been asked before, but since nobody seems to have an answer for that I have no other choice than to ask again.

  I have problems reading scores on a gaming site. The game went very well and I could connect successfully, but my scores are is never were on the list of players. The help section of the site suggests to uninstall / reinstall Flash Player. I had problems with Flash elsewhere so I thought I'd give it a try. The uninstall was successful, but now will not reinstall Flash. Now instead of a malfunction of the Flash Player, I have no Flash Player at all.

  The installation process takes place as it should - download setup in my office, I open it, I get the "Adobe Flash Player install" window, I double-click the icon, I wonder if I'm "sure I want to open it", I click on 'Open', I get my administrator password, then comes the problem. The next window popup has a black background for about 1/2 second you see the words 'Install to retrieve' and a loading bar progress, then the words disappear and you end up looking at the black box of the void. That's all.

  I have Ghostery, Lightbeam and HTTPS Everywhere Firefox modules. I disabled Ghostery through this process.

  Thanks in advance.

  Well, good news. I solved it. And he's not weird that no one has suggested this.

  Nested deep, deep, in the help section is the following:

  Still problems?

  If you are still experiencing difficulties installing Adobe Flash Player, try to download the installer directly from the following websites:

  • Flash Player for Safari and Firefox - NPAPI
  • Flash Player for opera and browsers Chrome - PPAPI

  Adobe has apparently not a copy of its own software that works? Ridiculous but true. In fact, you will need to download it from the Web site of your browser.

  Adobe, you guys seriously need to get your act together.

• Install HP Officejet 6310, printer all in one

  I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

  See if you can find the folder of extraction of HP that he created, then run the installer in there.

• I have a HP Officejet 6310 and want to install it on my new HP Pavilion Touchsmart Sleekbook 14.

  I have a HP Officejet 6310 and just bought a new HP Pavilion Touchsmart 14 - b109wm sleekbook.  How do we install the old printer on my new computer? The printer has a cable to the computer. Thanks for any help you can give me.

  Hi RSM288,

  Welcome to the HP forums!

  To install your Officejet 6310 on your new Touchsmart PC, I highly recommend that you download and run the HP printer installation wizard. This tool will find and download the software for you on Windows 7, 8 or 8.1. You can leave the USB cable plugged all the time and that makes things easier as well

  Let me know if that helps!

• Trouble installing the HP Officejet 6310 software.

  I have an IBM Thinkpad R50 under XP. When I try to install the software for my HP Officejet 6310 all-in-One printer the process starts but then quickly hold. Any suggestions?

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Cannot install Windows 7 drivers for Officejet 6310

  I have two computers that have been upgraded to Windows 7 from Windows XP.  In both cases, the upgrade has been accomplished by wiping the hard drive and do a clean install.  Everything else works on both computers, but I can't install the driver of Windows 7 for my Officejet 6310 on computers.  A computer is 32 bits, while the other is 64-bit, but in both cases, installation dies at the same point.  After, I downloaded the big software package and clicked on run the extracted file.  After I agree with all the terms, it then begins to install.  Within seconds, the on-screen icon indicates that it is "apply the updates", then the installer disappears.  None of the advice given on the troubleshooting page solves the problem.  I've seen a few others this problem in these forums.  Does anyone have a solution?

  In addition, please try to jump the application of updates as follows:

  While you must agree to the terms of the license, you will see 4 links above.

  Select options to use of wireless Internet and the mark No. for both options.

  Accept the terms and continue with the installation.

  Is it help?

• Officejet 6310 all in one software install problem

  Have a problem with the scan option. Single House appears in the window when there are also files and electronic mail. I went to the HP site and I removed all ads by HP listed in my programs because I was told to do and then downloaded the software and drivers for my system Windows 8.1. After downloading and extracting an installation window open and I clicked on install you are prompted. An error window opened and said: (the system cannot find the specified file). If the installation has not been installed. I went to HP site troubleshooting and it said download the troubleshooting and the program doctor Scan, done and got the same error message during installation. What to do now?

  Hello, welcome to the @navycwo4 Forums! I hope you enjoy your experience

  I noticed your messages on the error message that you are experiencing when you try to install your printer on Windows 8.1. I'm going to share with you a few suggestions.

  1 make sure that the Internet Explorer pop-up blockers are turned off before downloading the installer

  Blocker Internet Explorer: How can I disable Blocker?

  • Try to install

  2. If you are using McAfee secure Live or any other firewall, please temporarily disable the "real-time scanning".

  How to disable real-time scanning

  • Try to install it

  3. go to the start screen (you can also press windows + R to open the Run dialog box) and type %windir% should display the windows folder.

  Click on the folder and scroll until you see the files. Search for a class named 'HPWINS *.» DAT"(le * est un nombre qui varie) remove this file and retry the installation."

  • Try to install it

  I wish you good luck and please let me know the results!
  

  Have a great Tuesday

• Installing the driver Officejet 6310 all-in-One hang up anywhere from 0% to 3% on step 3 of 4

  I used the CD that came with the printer and downloaded the driver of HP drivers several times and always, it hangs during the installation phase. I have a Dell Inspiron E1505 with XP SP3 and I connect to the printer via USP.

  I suggest that during the installation process, open the tasks Manager and lookout for a process called Wrapper.exe tab process as soon as it appears, end of the process.

• Installation of the Complutense University of MADRID - need your help very badly - please help

  omg!!!!!!!!!!!!!! I had a moment difficult installing oracle UCM in my system...
  I managed to get the homepage but wen I click on a link, it says
  
  "The/idc3/idcplg requested URL was not found on this server."
  
  My induction is that iam not configure my cgi properly Setup in apache...
  
  Here are the necessary info:
  
  OS: WIndows 7
  Web server: apache 2.2
  
  Please find my file config apache below: (httd.conf)
  
  #
  # This is the main Apache HTTP server configuration file. It contains the
  configuration directives # that give the server its instructions.
  # See < URL: http://httpd.apache.org/docs/2.2 > for more information.
  # See especially
  # < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
  # for an analysis of each configuration directive.
  #
  # Do NOT simply read the instructions here without understanding
  # what they do. They are there only as advice or reminders. If you do not know
  # consult the online documentation. You have been warned.
  #
  # Configuration and logfile names: If the file names that you specify for a lot
  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
  # server uses this explicit path. If the file names do not start
  # with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
  # with ServerRoot value "(x 86) C:/Program Files/Apache Software Foundation/Apache2.» 2' will be interpreted by the
  # Server as "(x 86) C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
  #
  # NOTE: Where file names are specified, you must use forward slashes
  # instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
  # If a drive letter is omitted, the drive on which httpd.exe is located
  # will be used by default. It is recommended that you always provide
  # an explicit drive letter in absolute paths to avoid confusion.
  
  #
  # ServerRoot: The top of the directory under which the server tree
  # configuration, error and the log files are kept.
  #
  # Do not add a bar slash at the end of the directory path. If you point
  # ServerRoot to non-local disk, remember to point the LockFile directive
  # to a local disk. If you want to share the same multiple ServerRoot
  demons of # httpd, you will need to change at least the LockFile and PidFile.
  #
  ServerRoot "C:/Program Files (x 86) /Apache Software Foundation/Apache2.» 2. "
  
  #
  # Listen: Allows you to bind Apache to specific IP addresses and/or
  ports #, instead of the default value. See also the < VirtualHost >
  directive #.
  #
  # Change this to listen on specific IP addresses below for
  # prevent Apache glomming on all related IP addresses.
  #
  #Listen 12.34.56.78:80
  Listen to 90
  
  #
  # Dynamic Shared Object (DSO) Support
  #
  # To be able to use the features of a module that was built as a DSO you
  # duty place corresponding 'LoadModule' lines at this location until the
  # the directives that it contained are actually available before their use.
  # Modules statically compiled (those listed by "httpd-l") is not necessary
  # to be responsible here.
  #
  # Example:
  # LoadModule foo_module modules/mod_foo.so
  #
  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  #LoadModule auth_digest_module modules/mod_auth_digest.so
  #LoadModule authn_alias_module modules/mod_authn_alias.so
  #LoadModule authn_anon_module modules/mod_authn_anon.so
  #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  #LoadModule authz_owner_module modules/mod_authz_owner.so
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cache_module modules/mod_cache.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  LoadModule modules/mod_cgi.so cgi_module
  #LoadModule charset_lite_module modules/mod_charset_lite.so
  #LoadModule dav_module modules/mod_dav.so
  #LoadModule dav_fs_module modules/mod_dav_fs.so
  #LoadModule dav_lock_module modules/mod_dav_lock.so
  #LoadModule dbd_module modules/mod_dbd.so
  Modules/mod_deflate.so deflate_module #LoadModule
  LoadModule modules/mod_dir.so dir_module
  #LoadModule disk_cache_module modules/mod_disk_cache.so
  #LoadModule dumpio_module modules/mod_dumpio.so
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule ext_filter_module modules/mod_ext_filter.so
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule filter_module modules/mod_filter.so
  #LoadModule modules/mod_headers.so headers_module
  #LoadModule ident_module modules/mod_ident.so
  #LoadModule imagemap_module modules/mod_imagemap.so
  LoadModule modules/mod_include.so include_module
  #LoadModule info_module modules/mod_info.so
  LoadModule modules/mod_isapi.so isapi_module
  #LoadModule ldap_module modules/mod_ldap.so
  #LoadModule logio_module modules/mod_logio.so
  LoadModule log_config_module modules/mod_log_config.so
  #LoadModule log_forensic_module modules/mod_log_forensic.so
  #LoadModule mem_cache_module modules/mod_mem_cache.so
  LoadModule mime_module modules/mod_mime.so
  #LoadModule mime_magic_module modules/mod_mime_magic.so
  LoadModule negotiation_module modules/mod_negotiation.so
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  #LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  Modules/mod_ssl.so ssl_module #LoadModule
  #LoadModule modules/mod_status.so status_module
  #LoadModule substitute_module modules/mod_substitute.so
  #LoadModule unique_id_module modules/mod_unique_id.so
  #LoadModule userdir_module modules/mod_userdir.so
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule version_module modules/mod_version.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  
  < IfModule! mpm_netware_module >
  < IfModule! mpm_winnt_module >
  #
  # If you want httpd to run as a different user or group, you must run
  # httpd as root initially and it will pass.
  #
  # Group / user: the name (or #number) of the user/group to run httpd as.
  # It is generally advisable to create a dedicated and aggregatable for user
  # httpd, as with most system services are running.
  #
  Demon of the user
  Daemon group
  
  < / IfModule >
  < / IfModule >
  
  Server configuration # 'hand '.
  #
  # The directives in this section implement the values used by the 'hand '.
  # Server, which meets all demands that are not managed by a
  definition of # < VirtualHost >. These values also provide defaults for
  # all < VirtualHost > containers you can set later in the file.
  #
  # All these directives may appear inside containers < VirtualHost >,.
  # in which case the value default parameters will be substituted for the
  virtual host of # being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mail. This address appears on some generated by the page server, such
  # as error documents. for example [email protected]
  #
  ServerAdmin [email protected]
  
  #
  # ServerName gives the name and the port used by the server to identify itself.
  # This can often be determined automatically, but we recommend that you specify
  # explicitly to avoid problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  #ServerName bhuramish - HP.vc.shawcable .net: 80
  
  #
  # DocumentRoot: The directory you are going to use your
  documents #. By default, all requests are taken from this directory, but
  aliases and symlinks # can be used to point to other locations.
  #
  #DocumentRoot "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/htdocs.
  DocumentRoot "C:/Oracle/ucm/server3/weblayout.
  
  #
  # Each directory that Apache has access can be configured in respect
  # to which services and features are allowed and/or disabled in this
  # Directory (and its subdirectories).
  #
  # Everything first, we configure the 'default' to be a very restrictive of game
  features #.
  #
  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order deny, allow
  Refuse to all the
  < / Book >
  
  #
  # Note that, from this point forward you must precisely enable
  features special # to be enabled - so if something doesn't work not as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  #
  # This should be replaced by what you set DocumentRoot.
  #
  # < directory "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/htdocs" >
  < directory "C:/Oracle/ucm/server3/weblayout" >
  #
  # Possible values for the Options directive are "None", "All."
  # or any combination of:
  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named explicitly -'all Options '.
  # is not give it to you.
  #
  # The Options directive is complex and important. Please see
  # http://httpd.apache.org/docs/2.2/mod/core.html#options
  # For more information.
  #
  Options Indexes FollowSymLinks
  
  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be 'All', 'None', or any combination of key words:
  # Options FileInfo AuthConfig Limit
  #
  AllowOverride None
  
  #
  # Controls who can get stuff from this server.
  #
  Order allow, deny
  Allow all the
  
  < / Book >
  
  #
  # DirectoryIndex: sets the file Apache will serve if a directory
  # is requested.
  #
  < IfModule /idc3 >
  DirectoryIndex portal.htm
  IdcSecurity idc3
  < / IfModule >
  
  #
  # The following lines prevent the .htaccess and .htpasswd files to be
  # seen by customers of the Web.
  #
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  Meet all
  < / FilesMatch >
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive in a < VirtualHost >
  # container, error messages related to this virtual host will be
  # logged here. If you do define a for a < VirtualHost > error log
  container of #, that host errors will be logged there and not here.
  #
  ErrorLog logs / 'error.log '.
  
  #
  # LogLevel: Control the number of messages in the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,.
  # emerg, alert.
  #
  LogLevel warn
  
  < IfModule log_config_module >
  #
  # The following directives define some nicknames format for use with
  # a directive CustomLog (see below).
  #
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  
  < IfModule logio_module >
  # You must enable mod_logio.c use %I and frequency
  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
  < / IfModule >
  
  #
  # The location and format of the access (Common Log Format) log file.
  # If you do not have any logfiles access set in a < VirtualHost >
  container of #, they will be saved here. On the other hand, if you the do
  # define per - < VirtualHost > access logfiles, transactions will be
  # logged there and not in this file.
  #
  Common CustomLog "logs/access.log.
  
  #
  # If you prefer a log file of access, agent, and referer information
  # (Combined logfile format) you can use the following directive.
  #
  #CustomLog "logs/access.log' combined
  < / IfModule >
  
  < IfModule alias_module >
  #
  # Redirect: Allows to tell clients the documents used for
  # exist in your server's namespace, but no more. The customer
  # make a new request for the document at its new location.
  # Example:
  # Redirect permanent/foo http://bhuramish-HP.vc.shawcable.net/bar
  
  #
  # Alias: Maps web paths into paths of file system and is used to
  # access content that don't live under the DocumentRoot directive.
  # Example:
  LoadModule IdcApacheAuth C:/Oracle/ucm/server3/shared/os/win32/lib/IdcApache22Auth.dll
  IdcUserDB idc 'C:/Oracle/ucm/server3/data/users/userdb.txt '.
  Alias /idc3 C:/Oracle/ucm/server3/weblayout
  < /idc3 location >
  Order allow, deny
  Allow all the
  DirectoryIndex portal.htm
  IdcSecurity idc3
  < / location >
  #
  # If you include a trailing / on /webpath, then the server will be
  # require that he be present in the URL. It is also likely that
  # duty provide a < Directory > section to allow access to
  # the path to the file system.
  
  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as assumed names, except that
  # documents in the target directory are treated as applications and
  # executed by the server on demand, rather than as documents sent to the
  client of #. The same regulation on flight "/" applies to the ScriptAlias
  # as for the Alias directives.
  #
  ScriptAlias /idcplg/ "C:/Oracle/ucm/server3/weblayout / '.
  
  < / IfModule >
  
  < IfModule cgid_module >
  #
  # ScriptSock: On threaded servers, refers to the access path to the UNIX
  decision # used to communicate with the CGI mod_cgid daemon.
  #
  Newspapers/cgisock #Scriptsock
  < / IfModule >
  
  #
  # "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
  # CGI directory exists, if you have set up.
  #
  < directory "C:\Oracle\ucm\server3\weblayout" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >
  
  #
  # DefaultType: Server default MIME type used for a document
  # If it cannot establish also as file name extensions.
  # If your server contains mainly text or HTML documents, it is "text/plain".
  # a good value. If your content is binary, such as applications
  # or images, you can use "application/octet-stream" instead of
  # Keep browsers try to view binary files, as if they were
  # text.
  #
  DefaultType text/plain
  
  < IfModule mime_module >
  #
  # TypesConfig points to the file containing the list of mappings from
  # MIME file extension - type.
  #
  TypesConfig conf/mime.types
  
  #
  # AddType allows you to add or replace the MIME configuration
  # the file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress. Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented out, then you
  # should probably define these extensions to indicate media types:
  #
  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  
  #
  # AddHandler allows you to map certain "manipulators": file extensions
  # No actions associated with the file type. It can be either integrated into the server
  # or added to the directive of the Action (see below)
  #
  # To use CGI outside of ScriptAlias directories scripts:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  AddHandler cgi-script .cgi
  
  # For maps of type (negotiated resources):
  #AddHandler type-plan of the var
  
  #
  # Filters allow you to process content before sending it to the client.
  #
  # To parse .shtml for server-side includes (SSI) files:
  # (You will also need to add "Includes" the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  < / IfModule >
  
  #
  # The mod_mime_magic module allows the server to use various boards of the
  content of the file itself to determine its type. The MIMEMagicFile
  # directive tells the module where the definitions of suspicion.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  ((# 1) text 2) local redirects 3) external redirects
  #
  # Examples:
  #Error Document 500 "The server made a boo boo".
  #Error Document 404 Missing.html
  #Error Document 404 "/cgi-bin/missing_handler.pl"
  #Error Document 402 http://bhuramish-HP.VC.shawcable.NET/subscription_info.html
  #
  
  #
  # MaxRanges: Number of channels in a Maximum request before
  # return the resource, or 0 for unlimited
  # Default is to accept 200 lines
  #MaxRanges 0
  
  #
  # EnableMMAP and EnableSendfile: on systems that support.
  projection in memory # or the sendfile syscall is used to deliver
  # files. Usually, this improves the performance of the server, but must
  # turn off when mounted network is served
  # file systems or if support for these functions is also
  # broken on your system.
  #
  #EnableMMAP off
  #EnableSendfile off
  
  # Additional configuration
  #
  # The configuration files in the conf/extra/directory can be
  # included to add additional features or change the default configuration
  # the server, or you can simply copy their content here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multilingual error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Entries to the fancy directory
  #Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User directories
  #Include conf/extra/httpd-userdir.conf
  
  # Info in real time on the applications and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  #Include conf/extra/httpd-vhosts.conf
  
  # Local access to the manual for the Apache HTTP Server
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Secure connections (SSL/TLS)
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following text should be present to support
  # start without SSL on platforms without equivalent/dev/random
  but # a statically compiled in mod_ssl.
  #
  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >
  
  My CONFIG.cfg file:
  
  <? jcharset cfg = "UTF8"? >
  Server #Content System Properties
  IDC_Name = idc3
  IdcProductName = idccs
  SystemLocale = English-United States
  InstanceMenuLabel = idc3
  InstanceDescription = idc3 content server
  SocketHostAddressSecurityFilter = 127.0.0.1
  
  Variable #Database
  IsJdbc = true
  JdbcDriver = net .sourceforge .jtds .jdbc .driver
  JdbcConnectionString = jdbc:jtds:sqlserver://bhuramish-HP:1433 / OracleECM
  JdbcUser = ecm
  JdbcPassword = VZU64a2zvfxn4H/vxFslVk0wdHELfmeJ4z + xMB5g4Rw =
  JdbcPasswordEncoding = Intradoc
  
  Variable #Internet
  HttpServerAddress = bhuramish - HP: 90
  Mail = mail server
  SysAdminAddress=sysadmin@mail
  HttpRelativeWebRoot = / idc3.
  CgiFileName = idcplg
  UseSSL =
  WebProxyAdminServer = true
  
  #General option Variables
  
  Variable #Additional
  DatabaseType = mssql
  JAVA_CLASSPATH_customjdbc=$SharedDir/classes/jTDS-1.2.4.jar
  SearchIndexerEngineName = DATABASE. METADATA
  Server web apache =
  IdcAdminServerPort = 2220
  IntradocServerPort = 2222
  
  Please help me on this... I worked in stellent IBPM 7.6 sp2 in a large cpompany and never had the opportunity to work on Setup frm scrach...
  
  See you soon
  Vivek
  
  Published by: 887781 on September 27, 2011 19:10

  Hello

  instance of #ucm10g

  LoadModule IdcApacheAuth IdcApache22Auth.dll
  Idc3 IdcUserDB '/data/users/userdb.txt '.

  /Idc3 alias "/weblayout".
  
  Order allow, deny
  Allow all the
  DirectoryIndex portal.htm
  IdcSecurity idc3
  

  This is how apache entries must be.

  Make the changes as above, and then restart Apache, Complutense University of Madrid.

  Test to see if the problem still persists.

  Thank you
  Srinath