OfficeJet 6480 problem w fax setup, will not pass through wireless phone

Similar Questions

• PIXMA MX 410 jam. Standard 8 1/2 by 10 sheets of paper will not pass through back to print.

  Amounts in paper and no response. If I have a print enevlope or resize the size of paper to 4 inches wide, then paper moves through the printer.  What can I do?  What is the warranty on this printer. I got it for less than a year?

  Hello ckuhn55.

  Please check if all obstructions are in the paths of paper or inside the printer that can keep the paper to load correctly.

  If the problem persists, please contact our support group using the link 'Contact us' below for further assistance.  The warranty for the unit is for one year from the date of purchase.

  It has not responded to your question or problem? Find more help at the Contact Us.

• I want to print on index cards, 3 x 5, but the card will not pass through HP4350. What printer will do it?

  I tried on our HP 4350, but the rest of the card in the printer and I get a warning from paper jame. We also have a number of other models of HP laserjet here at school. Is there a model that can handle the print on 3 X 5 cards?

  MRHerron,

  The LaserJet 4350 can handle 3 x 5 cards, and I refer you to the Manual:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c00218691/c00218691.PDF

  Please refer to the pgs 44, 50 68-69.

  (1) 20 cards per load

  (2) Tray # 1 only

  (3) custom settings

• Will not pass through all frames

  OK so my last question has been answered, it worked as I wanted, except for some reason when I click it buttons that it crosses as executives of first and second. This is the code:

  Stop();

  left_btn.addEventListener (MouseEvent.CLICK, click6);
  right_btn.addEventListener (MouseEvent.CLICK, click7);

  function click6(e:MouseEvent): void {}
  {if(this.currentFrame==1)}
  this.gotoAndStop ("foto3"); }
  {if(this.currentFrame==2)}
  this.gotoAndStop ("foto1"); }
  {if(this.currentFrame==3)}
  this.gotoAndStop ("foto2"); }
  }
  
  function click7(e:MouseEvent): void {}
  {if(this.currentFrame==1)}
  this.gotoAndStop ("foto2"); }
  {if(this.currentFrame==2)}
  this.gotoAndStop ("foto3"); }
  {if(this.currentFrame==3)}
  Stop ("foto1"); }
  }

  Any ideas?

  Use:

  Stop();

  left_btn.addEventListener (MouseEvent.CLICK, click6);
  right_btn.addEventListener (MouseEvent.CLICK, click7);

  function click6(e:MouseEvent): void {}
  {if(currentFrame==1)}
  gotoAndStop ("foto3"); } else
  {if(currentFrame==2)}
  gotoAndStop ("foto1"); } else
  {if(currentFrame==3)}
  gotoAndStop ("foto2"); }
  }
     
  function click7(e:MouseEvent): void {}
  {if(currentFrame==1)}
  gotoAndStop ("foto2"); } else
  {if(currentFrame==2)}
  gotoAndStop ("foto3"); } else
  {if(currentFrame==3)}
  gotoAndStop ("foto1"); }
  }

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• OfficeJet Pro 8500 has more ADF will not work

  We had this machine since January 2011.  The warranty expired in January 2012.  The ADF has stopped working about a month.  I see the problem - the roller thing will not drop to feed the sheets of paper.  Does anyone else have this problem?  How to solve it?  And most of all... is this normal for a machine HP to have bad like this in less than two years?

  @highflyer3035, I see you are having a problem with the ADF on the printer. I would say later document, which will give you several step to solve the problem.

  I know that the title is not your problem, but the steps are relevant to the current situation.

  Let me know the results.

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• Computer hp laptop 15 will not pass the logon screen

  I go from 8.1 to 10. Had problems with USB and asked the Microsoft Chat Help. They fixed but my keyboard and wifi would not work. They tried again and after that they have restarted the computer remotely it will not pass the logon screen (time/date). The screen and the keyboard manual do not work. I have a hp laptop 15. They want to take their store service 02:30 minutes away. Any help?

  Hi @samlobos,

  Thank you for joining the HP Forums!

  I read your post that your 15 HP laptop is not going to pass the opening screen. I'm happy to help you!

  Please, try the steps in this guide, the computer does not (Windows 10). If this does not resolve the problem, contact HP telephone support for further assistance for the maintenance options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• Variables will not come through mailer

  I have a php mailer on my site mortgagemaestro.net and variables will not come through when I send the form to any computer but mine. I just get a blank form in my email.
  Here are the two codes
  
  Thanks for any help
  
  Stop();
  
  var b1Load:LoadVars = new LoadVars();
  var receiveLoad: LoadVars = new LoadVars();
  
  This.B1.onRelease = function() {}
  If (theEmail.text == null | theEmail.text == "" | ") theName.text == null | theName.text == "" | " homePhone.text == null | HomePhone.text =="") {}
  gotoAndStop ("error");
  } else {}
  b1Load.theName = theName.text;
  b1Load.homePhone = homePhone.text;
  b1Load.workPhone = workPhone.text;
  b1Load.theEmail = theEmail.text;
  b1Load.theAddress = theAddress.text;
  b1Load.theCity = theCity.text;
  b1Load.TheState = theState.text;
  b1Load.theZip = theZip.text;
  b1Load.theCall = theCall.text;
  b1Load.sendAndLoad (" http://www.mortgagemaestro.net/lib/phpmailer/email.php", receiveload);
  getURL (" http://l-h1.com/richard_white_lending/destpage/thankyou.php", "_self");
  }
  
  <? PHP
  require ("Class.PHPMailer.php");
  
  $mail = new PHPMailer();
  
  $mail-> IsSMTP(); send via SMTP
  $mail-> host = "mail.mortgagemaestro.net"; SMTP servers
  $mail-> SMTPAuth = true; enable SMTP authentication
  $mail-> Username = "[email protected]"; SMTP Username
  $mail-> password = "32bf1a3"; SMTP password
  
  $mail-> from = '[email protected] ';
  $mail-> FromName = "drive";
  $mail-> AddAddress ("[email protected]");
  
  $mail-> object = "Mortgage Maestro lead";
  $mail-> body = "name:"; "
  $mail-> body. = $_POST [theName];
  $mail-> body. = "\nEmail: «;»»
  $mail-> body. = $_POST [theEmail];
  $mail-> body. = ' \nHomePhone: '; "
  $mail-> body. = $_POST [homePhone];
  $mail-> body. = ' \nWorkPhone: '; "
  $mail-> body. = $_POST [as workPhone];
  $mail-> body. = "\nAddress: «;»»
  $mail-> body. = $_POST [theAddress];
  $mail-> body. = ' \nCity: '; "
  $mail-> body. = $_POST [theCity];
  $mail-> body. = "\nState: «;»»
  $mail-> body. = $_POST [the State];
  $mail-> body. = ' \nZip: '; "
  $mail-> body. = $_POST [theZip];
  $mail-> body. = ' \nCall: '; "
  $mail-> body. = $_POST [theCall];
  
  If (! $mail-> Send())
  {
  echo "Message was sent not < p > ';
  echo "Mailer error:". "." $mail-> ErrorInfo;
  "exit";
  }
  
  echo "Message was sent;"
  
  ? >

  OK, here it is incase anyone ever have this problem. I changed all the instance names as theCall and theName to variables. For this change in the area titled var: sort of in the lower right corner of the properties. I also changed the shape of the POST method and made my form a clip called sendWork

  Well here are the scripts.
  I'm still having a problem with my if statements. They stopped working after I changed everything to variables. He would still put me to the error screen that I put in place even when I had all of the information entered.

  I know it's because they are implemented by using the instance names (see above the script), but when I say that everything will work smooth, if all goes well

  Stop();

  This.B1.onRelease = function() {}
  sendWork.loadVariables ("email.php", "POST");
  getURL (" http://l-h1.com/richard_white_lending/destpage/thankyou.php", "_self");
  };

  <>
  require ("Class.PHPMailer.php");

  $mail = new PHPMailer();

  $mail-> IsSMTP(); send via SMTP
  $mail-> host = "mail.mortgagemaestro.net"; SMTP servers
  $mail-> SMTPAuth = true; enable SMTP authentication
  $mail-> Username = "[email protected]"; SMTP Username
  $mail-> password = "32bf1a3"; SMTP password

  $mail-> from = '[email protected] ';
  $mail-> FromName = "drive";
  $mail-> AddAddress ("[email protected]");

  $mail-> subject = "Mortgage Maestro lead";
  $mail-> body = "name:"; "
  $mail-> body. = $_POST [theName];
  $mail-> body. = "\nEmail: «;»»
  $mail-> body. = $_POST [theEmail];
  $mail-> body. = ' \nHomePhone: '; "
  $mail-> body. = $_POST [homePhone];
  $mail-> body. = $_POST [homePhone02];
  $mail-> body. = $_POST [homePhone03];
  $mail-> body. = ' \nWorkPhone: '; "
  $mail-> body. = $_POST [as workPhone];
  $mail-> body. = $_POST [workPhone02];
  $mail-> body. = $_POST [workPhone03];
  $mail-> body. = "\nAddress: «;»»
  $mail-> body. = $_POST [theAddress];
  $mail-> body. = ' \nCity: '; "
  $mail-> body. = $_POST [theCity];
  $mail-> body. = "\nState: «;»»
  $mail-> body. = $_POST [the State];
  $mail-> body. = ' \nZip: '; "
  $mail-> body. = $_POST [theZip];
  $mail-> body. = ' \nCall: '; "
  $mail-> body. = $_POST [theCall];

  if(!$mail->Send())
  {
  echo "Message has not been sent.

  ";
  echo "Mailer error:". "." $mail-> ErrorInfo;
  "exit";
  }

• Voicemail will not play through bluetooth car

  I have a Moto X (Sprint) and it won't play my voicemails via Bluetooth... Worse that this, because I'm connected to bluetooth in the car, I can not play through the phone that either will I am in the car, everything is running... Does not work on buick Enclave wife either.

  Even the phone works fine, even a text for voicemail system on Buick is working well!

  Help!

  You are also able to use it during a call? You use stock voicemail (component number) or some visual voicemail application? You have the features A2DP (ability to listen to music via bluetooth from your car)?

• CM1415fnw ctrl panel will not allowing printing wireless (wifi) when you are connected to wired ethernet

  Panel Display control for CM1415fnw says that it will not allow for wireless (WiFi) network card while connected to the wired Ethernet cable.  Was able to get the printer to activate the network WiFi once the Ethernet cable has been disconnected. and there he has disabled the connection once again Ethernet has been reconnected.

  How this printer can be configured to allow both wireless and wired print 802.11?

  Thank you.

  Hi CM1415fnw_help,

  You can't the connected printer Ethernet & Wireless at the same time. The only option is to connect the printer USB & Ethernet or USB & wireless. It is not possible to have two networks connected at the same time. Let me know if you need help.

• Installed on the new laptop, but will not work as wireless? It does not support this device?

  I have the new series g of HP Pavilion... running windows 7. installed HP office jet J4680 and works through usb cord but will not work as wireless... will not be in place.

  You are running windows 7 starter edition?

  -to know

  -Right click on computer

  -Select Properties

  -Look for the system type

  Also, what processor do you have?

• How can I cancel my monthly payment, as if they will not cancle because no phone no email not to write to

  How can I cancel my monthly payment, as if they will not cancle because no phone no email not to write to

  Hello

  Please see the following links:

  Manage your creative cloud membership

  Cancel your membership creative cloud

  If you still need help please contact support: contact customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  

  Let us know if that helps.

  Kind regards

  BANI

• OfficeJet pro 8500 a: 8500 has will not stop printing

  immediately after setting up and installation of my 8500 it began printing a page with only the fraction 1/4 and a smiling face in the very top left of the page and that's all it prints, one after the other, again and again, and do not stop. If I have to cancel the printing of the touch screen, it stops the current print but restarts printing again shortly after.

  I sent a test page (page has shown in print queue), but I won't stop printing the page of fraction and smiley face.  the work queued print ever.

  There is no error before, after or during the printing of this page.

  Welcome to the HP community @gemini570,

  I understand your Officejet 8500 has constantly prints a page with a smiling face in the upper left corner, and I wanted to respond to try to help.

  Please, start by connecting your PC to the print and scan doctor and choose "print trouble." This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  You can also check to see if you have Web Services enabled on the front of the printer and try to turn it off to see if the pages stop printing on.

  If the above don't help, try to uninstall the printer software , restart the computer and run the HP printer install Windows Wizard to install the printer.

  Another idea that comes to mind, would be to try stop and start the print spooler:

  1. click on start
  2. type 'Services' in the search field.
  3. open SERVICES
  4. at the bottom, click "extended view.
  5. search for the print spooler
  6. right click and choose Properties
  7. Select Automatic from the drop-down list, close the window
  8. right-click Print Spooler and select 'Stop', wait until it stops and then again right click and 'Start '.
  9. close out Services and try your print.

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  Let me know the results!