OfficeJet 6500 E709a carriage will move to the Middle

Similar Questions

• HP Officejet 6500 E709a series will scan but will not print

  I got a HP Officejet 6500 E709a Series for about 4 years now.  After a few months, it seems "loose" the ability to print.  It can scan via the USB of my laptop Toshiba, but won't print documents.  I had it works but has recently done a Windows Update (Win 7) and on the side of the printer to stopped again.  I tried all the options troubleshooting including uninstall of the printer and allowing windows to find and automatically install it but no good.  Then, I made an update of the driver printer full of windows and tried with the latest dirvers HP Officejet 6500 E709a Series, but still not good.  The printer is connected directly to the laptop - without hubs etc. What can I do now?

  Finally got the problem solved thanks to printing HP and doctor Scan to http://support.hp.com/us-en/document/c03275041. Well worth a visit!

• Choose to install Officejet 6500 E709a Software

  Is it possible to choose to install the Officejet 6500 E709a software?

  During the installation of the software, in the window where you check the box to accept the terms and click Next or continue, you should see a link that says "Software Options" of something in this direction. If you click it, you will be able to select the components to install.

• HP Officejet 6500 e709a: Error Message When you install all in one product

  I'll have to re - install my HP Officejet 6500 e709a software.  I get the following error message when I try to install it.  Someone at - it suggestions on how I can fix this?

  Thank you

  JN

  

  Hi @MattNC79,

  Welcome to the Forums of HP Support! I understand you are trying to reinstall the software and drivers for your HP Officejet 6500 to the computer running Windows 8.1 operating system. When you try to install, you get an error message with an error code. I would like you to click on the link below to begin:

  HP printers - fatal error ' error 1603. A fatal error occurred during installation "(MSI error 1603) displays in HP Software Installation in Windows

  Please let me know the results, I'll watch for your reply.

  Thank you

• Driver for Officejet 6500 E709a must be updated. Currently causes a distortion of the Excel worksheets.

  By Microsoft, the driver for the Officejet 6500 E709a must be updated to resolve a problem that causes the deformation of MS Excel spreadsheets.  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-Excel/Excel-2010-scrolling-problem/166a8...

  The forum page linked above:

  If the problem occurs in safe mode too, change the default printer and check. If Excel works fine after changing the default printer, then contact the manufacturer of the printer to update printer drivers.

  GHenry512, welcome to the forum.

  Since you don't mention which operating system you use, here is the Support page for the printer.  Choose your operating system from the drop-down list to see if there is an update to the driver.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Printer Officejet 6500 E709a wire to the router via USB

  Can I connect my Officejet 6500 E709a via the USB connection to my router 9100EM Ultraline series 3 model so that it can be seen by both of my PC, which is connected directly to the router via LAN Ethernet ports? If so, what measures are necessary? At the present time, the printer is connected via USB to a PC and the other PC cannot use the printer, unless the first PC is on.

  I gave up on the online software update from HP for the Officejet 6500 E709a and removed it. So, I just use my old CD to install the printer, this time to install it as a printer wired ethernet, which worked. Thanks for trying to help.

• My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  HP Pavilion D7, Windows 7, all parameters are good, network connected, all permit

  Hi ashkin1975,

  Please disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  From the front of the printer: configuration > network > network by default.  Now, in the same network menu, run the Wireless Setup Wizard.

• Impossible to establish a two-way connection with mac 10.5.8 and officejet 6500 e709a

  I was able to use my printer before without any problem, but this week he has stopped communicating with my iMac. I am running OS 10.5.8 and my printer is an officejet 6500 e709a. I tried to reset the printing system, uninstall and reinstall the hp software, turning and turn it on again, switching cords and usb ports, and nothing seems to work. I tested the ports on the iMac and they work with other devices, and the printer works fine with my macbook that uses the same operating system. Where should I go from here?

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• OfficeJet 6500 E709A on new HP Desktop Windows 8.1 installation problems

  Hello

  I'm troubleshooting an issue on all new HP Envy Desktop from my father-in-law and its existing OfficeJet 6500 E709A.  It came with Windows pre-installed 8.0, and I ran Windows Update to apply all the necessary patches, which included the upgrade from PC to Windows 8.1.  His previous PC is a Dell Windows XP, but due to the end of LIFE of XP, he bought a new HP PC.  I had him download 64-bit Windows 8.1 for the printer on the HP site and it did not work properly.  I tried to uninstall using the uninstall on the HP support site and requiring a reboot.  We then tried to reinstall the software after the restart and he said that it was extracted files but did not say where they were extracted to.  The extract window goes away and then it's just sitting there and nothing else happened.  I also saw another method to install the printer through the computer to be scanned and then decide the best software and driver to use.  Who started working and then just sit there as well and did not finish.  I'm in and I normally don't have these types of issues, but for some reason any, that he's not well.  I also went to the Microsoft site to test hardware compatibility with Windows 8.0/8.1 and it said it was, but other people said that it is not based on their experiences.  I have tried everything I know and searched this forum and google for the answers and don't come up with anything.

  1. when the software is extraction, can you please tell me where this is extraction to (IE folder Temp, Windows, etc.)?

  2. the software and drivers are 10 22, 2012, is there new files that you can give?

  3 is this fully certified by HP printer to run on Windows 8.0/8.1?

  4. is there anything else I can try?  I think I saw a troubleshooting step when you install from the CD and then download the updated Support files or windows.  I don't remember what OS files were on the CD.  Since it is in another State, I do it via webex with him to control and do what I tell you him to do, it complicates things.

  Help, please!  This is frustrating me like him.

  Thank you

  Rob

  Hello

  First, enter the installation folder and delete all current software that could be partially installed.

  To access the installation folder, click R on your keyboard and the Windows logo keys. the Run dialog box is displayed.

  Type %temp%, and then click OK.

  Open the HP installation folder that begins with the characters in 7z, if there are several just open the most recent one.

  Open the Util folder, then select the CCC folder and run the Uninstall_L3.bat file.

  In the listed command line click on Enter and confirm a window of dialogue for the installation of multiple, don't forget to restart the PC once you will be prompted to do so.

  Proceed as follows, in my view, it should solve the problem described:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  Kind regards
  Shlomi

• HP Officejet 6500 E709a series works only on some machines not shared.

  In my house, I have a "central" computer that I have attached the printer HP Officejet 6500 E709a Series.  It is Windows Vista.  I have 5 other computers in the House running different versions of Windows 7 (Home Premium or Ultimate) and they connect to the server via WiFi.

  The server can print pages to test very well.  Three of the five connect and print correctly.  But the other two - which, of course, are the two who absolutely * must * be able to print - unable to connect.  Different Assistants say they connect, but when I try to print a Test Page, it fails.

  I think it has something to do with the printer drivers installed on the network computers, but I can't find a way to remove these drivers, and then try again.  So, when I remove the printing device, and then add the computer just re-active again, the old drivers after.

  How can I remove the drivers for a fresh install (theoretically)?

  Don't forget... the printer works fine on the computer, to which it is attached.  Tellling so get the installation disc, etc., is the opposite of the useful.

  Thank you

  -Damian

  Thanks for the reply.  It really helped, but it was nice to have an answer.  =*)

  What I finally was this:

  1: I opened the Panel and went to printers.

  2: I removed the printer I tried to install.

  3: I clicked once on another printer.

  4: at the top, near the menu bar are a few other links.  I clicked on the print server properties

  5: a new window will appear.  I click on the tab drivers.

  6: here, I deleted the drivers of the old printer and the drivers for the new printer I tried to install.

  7: some of them wouldn't uninstall.  So I shrugged my shoulders and who agreed.

  8: I saved the changes, and then completely shut down my computer.

  9: I turned on my computer.

  10: I went to this area and checked again.  I tried again to remove the things that he wouldn't let me delete before.  A couple of times it worked.  (If so, I did the closing down / restart the process again).

  11: now, I went back to the Panel and printers.

  12: I clicked on the button Add a new printer.

  13: I followed the steps.

  14: this time, the correct drivers installed and the thing that worked!

  I hope that would help others who get stuck.

  -Damian

• OfficeJet 6500 E709a: Officejet 6500 E709a - cannot scan

  Hi all

  I have a HP Officejet 6500 E709a. My computer is running the operating system Windows 10 Pro x 64, and I have the latest software/drivers installed as downloaded from the HP website. When trying to browse the HP Solution Center, I click on the button "scan"document"which is in the software. After clicking, a small box appears which says "HP Scanning", but it is only about 2 seconds before closing, after which nothing ever happens. She is supposed to appear a settings window which allows me to set my scan and scan settings, but as I said, this never happens.

  Thank you all in advance for any help.

  Cole

  Analysis of the issues...

  Please try this scanning solution:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.
  
  Let us know.

• HP Officejet 6500 E709a: Scanning and Windows 10

  In the program compatibility Windows 10, he said that my printer all-in-One (HP Officejet 6500 E709a) was compatible with Windows 10 so I have upgraded from Windows 7 to Windows 10.  I still can not print, but cannot scan.  I tried to install the drivers from this site but no help.  I deleted ALL my computer hp software and installed the suggested drivers but still no help.  Can someone tell me something that works?  My HP Officejet 6500 E709a is connected by a CAT 5 network cable to a hub connected to my computer.

  Thank you!

  Hi @deltatrooper,

  I see that you are still not able to scan with HP Solution Center on Windows 10.

  Were you able to scan from the Windows Fax and Scan windows software?

  Please try the steps listed in @JohnGPB post. Scan function lost after upgrade Windows 10

  There are several steps to go and change the registry to remove the HP printer files.

  Note: For other users using a computer HP not work not level 4, just level 3 Uninstall Uninstalling.

  I would like to know what the results are. Thank you.

• My Officejet 6500 E709a printer won't scan, it says "no opt. NUM.

  My Officejet 6500 E709a printer won't scan, it says "no opt. NUM.   I am trying to reinstall it but it says that the operating system is not correct. What to do?

  Hello

  Windows forums - Hardware & drivers-French / English

  http://answers.Microsoft.com/fr-FR/Windows/Forum/Hardware?tab=all&TM=1360356493819

  Don

• All OfficeJet 6500 E709a printhead replacement

  I can jump the electrical contacts cleaning while changing a printhead on an Officejet 6500 E709a? Following the instructions from HP to change.  Step 6 of the instructions States, "clean the electric contacts. The replacement print head set comes with wipes moist meadow. "No wipes were in the padded envelope; thought they might be in the real seal containing the replacement print head set. Laughing out loud

  Is there another way I can clean them up?

  Thanks for reading this. I solved the problem successfully. I used alchol friction on a cloth for glasses. Successfully completed the replacement.

  Hi bkrueger3

  Glad to hear that it works well for you.

  For anyone reading who wants to buy a replacement print head, see the link below for the HP part store

  http://welcome.HP.com/country/us/en/wwhowtobuy.html

  Ciara

• HP Officejet 6500 E709A AiO does not print web pages

  My HP Officejet 6500 E709A AiO printer does not print, or even to get anything in the queue when you try to print from a web site.  We have a HP Windows 7 Home Prime Minister?  We have relocated our printer and nothing new happened.

  Went to Windows 7 Forum #7 dated 01/08/09. We were told to remove the 32-bit IE8 version, when we initially installed Windows 7, but it is necessary to print from the web. Go to C: program file (x 86), Internet Explorer, then iexplore. I made a copy of the shortcut icon and installed on the desktop computer for I can use it when I want to interface with the web and be able to print from the web. Hallelujah!