OfficeJet 6500 more: how to print from a program back on Officejet 6500 more?

On the old laserjet, I could open the printer as a file in a back program and send lines to print.  Is it possible to do it on the Officejet 6500 Plus?

>> ... Is it possible to do it on the Officejet 6500 Plus? ...

Not really.

This model printer (like most peripheral inket consumers) do not understand plain text ASCII.

The only way to send data to it is to imitate what does the printer driver, and convert text and images (the owner) encapsulated, compressed, raster image understood by the device format (which is unencapsulates and decompresses these images and prints the result 'points').

Tags: HP Printers

Similar Questions

  • How to print from iPhone / iPad for Officejet 4500 Wireless printer?

    I would like to print from my iPhone / iPad on my Officejet 4500 Wireless printer.  Y at - it an iTunes app I need to download?  My printer works fine print wirelessly from my desktop, just do not know how to print from my iPhone / iPad.  From what I read, it seems that this printer is not enabled for Airprint.

    Hello

    You can print from iOS using HP ePrint home & Biz.

    You can find more details below:

    http://support.HP.com/us-en/document/c02775166

    Kind regards

    Shlomi

  • How to print from my ipad to the HP6500a more

    How to print from my ipad to the HP6500a more

    Hello

    Your Airprint enabled printer, all you need is AirPrint on your iPad.

    Kind regards.

  • How to print from an acer c720 chromebook to hp office jet 6500 wireless?

    How to print from an acer c720 chromebook to hp office jet 6500 wireless?  Thank you very much!

    Hi @neeter888 welcome to the HP Forums. I appreciate that you try to configure your HP printer to print from your Chromebook.

    With the help of Google Cloud Print with your HP printer

    Getting Started with Google Cloud Print

    If you don't have a Windows or Mac computer, you can tell your printer to connect to your router from the front panel as follows:
    To connect to the wireless network

    • Press the Setup button on the printer control panel.
    • Press the right arrow key to select the network settings and press the OK button.
    • Press the right arrow key to select the wireless configuration wizard, and then press the OK button.
    • Follow the on-screen instructions to complete the installation of the network.

    Here are other ways to connect to your network if you need:
    Installation of the software of the printer on a wireless network or network (Ethernet) cable

    I hope this helps

  • How to print from a Tablet samsung210.1 on a printer Canon mx 510-512. I use mozilla ops.

    How to print from a samsung Tablet 2 10.1 on a mx 512 of Canon wireless printer. I use mozilla ops. I had the same problem with cloud 9 app impression too. any help would be greatly appreeciated. my e-m is [Mod Note: deleted personal information according to the GUIDELINES of the FORUM]

    Thank you

    rtcamp

    Thank you when I recalled that I myself am connected to alberque Office spoke to chris & he was able to fix the problem.thanks for assistance.

    RTC

  • How to print from an iPad? What I need to download SW to the iPad?

    How to print from my iPad to my Photosmart 6510? I need to download a SW or App for the iPad? If so who?

    Hello Luke - P,.

    You don't need to download apps or SW to print from your iPad. There are actually two ways to print from your iPad: use ePrint or on a local network using Airprint wireless.

    To use ePrint, you would find your email address printers by enabling Web Services on the front of the printer and sending an email to this address of the printer print your message and/or attachments included

    To use Airprint, you make sure that your printer and iPad are connected to the same wireless network and that your iPad a iOS Version 4.2 or later and use the print function integrated included on the iPad software. You can print from an application, Mail, Safari and pictures in this way.

    You may need to perform an update of product make sure airprint works.

    If you have other questions you can reply to this message and I'll try to find an answer for you.

  • How to print from the capture tool?

    How to print from the capture tool?

    Hello

    The Snipping Tool does not support print screen capture.

    You must save the snip as image file and open it in a program that supports printing.

    Concerning

  • Anyone know how to print from XPS Viewer?

    Hi... anyone know how to print from XPS Viewer?

    Original title: XPS Viewer

    Hi AnggiUlfa,

    You should be able, within the XPS Viewer, click file, and then click on print.

    If you need assistance, please let us know any additional details about your question.

    Thank you!

  • How to print from my android phone (Droid X 2) on my printer (HP 8600 +)?

    How to print from my android phone (Droid X 2) on my printer (HP 8600 +)?  I send a pix of my phone to the email address of the printer, but it does not appear on HP eprint print jobs.

    Hello

    Please check check this for the installation program:

    https://play.Google.com/store/apps/details?ID=com.HP.Android.print&hl=en

    Good luck.

  • F2110 all-in-one: print from a program.

    I can't print from a program that is to say the word.

    I downloaded the HP Toolbox and ran this program without success.

    In this case, you can try to uninstall and reinstall the printer using the latest drivers from the link below.

    Printer driver

    Make sure that you save the file when you are prompted before running it.

    Also HP recomments use a USB cable that is not more than 6 feet long.

    Give Kudos to say 'thank you' by clicking on the "icon shots."

    Click on 'accept as Solution' if it has solved your problem, while others may find it.

    Although I am an employee of HP, I speak for myself and not for HP.

  • Impression of problem if I try to print from some programs

    Vista will not display in some programs? I can print from a program and if I go to the other that it will not print, it happens on both programs. I can print all other programs at any time unless you print from these two programs first? If I print from all other programs first, it will not be printed from the other two? Strange!

    Vista will not display in some programs? I can print from a program and if I go to the other that it will not print, it happens on both programs. I can print all other programs at any time unless you print from these two programs first? If I print from all other programs first, it will not be printed from the other two? Strange!

    Printer problems in windows
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    The tutorial consists of 3 parts:
    Step 1: Check hardware
    Step 2: Use a troubleshooting tool
    Step 3: Update drivers

    Application Microsoft Support Fix It:
    http://support.Microsoft.com/mats/printing_problems/en-us

    Try this Windows tutorials:
    It consists of many themes that you can click and read the tutorials.
    There also an Fix It application
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
    http://support.Microsoft.com/ph/11732#TAB0

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • When I print, the photo viewer rises and am OBLIGED to print from that program. The problem is, that it does not work - the colors are inverted and incorrect. All attempts to correct in the color management failed.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • When I print, the photo viewer rises and am OBLIGED to print from that program.  The problem is, that it does not work - the colors are inverted and incorrect.  All attempts to correct in the color management failed.  Some images are color reversed negatively. and others not when the print window picture viewer options are increasing. and every time I print a normal color on the picture he reverse out come.
    • Recent changes to your computer
    • What you have already tried to solve the problem

    didn't work :/

    ==============================================
    It may be interesting to try to remove all color profiles in the color management.

    Windows 7 - change color management settings
    http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

    If this does not work... update or just reinstall your printer driver may be worth a try.

    Good luck...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Unable to print from other programs like Gimp and the error is "your photos cannot be printed because this error occurred.

    Original title: I can print from other programs such as Gimp, just not windows live photo

    When I first installed Windows Live I could print very well but now I have the same box that says "your photos cannot be printed because this error occurred.  I looked in the forums and found several answers, but none that have the situation corrected.

    Hello

    Thanks for posting your question in the Microsoft Community.

    From your problem description, I understand that you can not to print from the program Gimp and the error is 'your photos cannot be printed because this error occurred'. Please let me know if this isn't the problem that you are experiencing.

    I understand the inconvenience caused to you. I'll help you solve the problem!

    Before troubleshooting, I have little information on the issue.

    1. what type of image file?

    2 are you facing this problem with specific program or all programs?

    3. did you of recent changes to the computer before this problem?

    4. What is the serial number and model of the printer?

    Note (1): If you are faced with the question with all programs, try the methods you haven't tried earlier and then check after each method:

    Method 1: Print a test page:

    http://Windows.Microsoft.com/en-CA/Windows7/print-a-test-page

    Method 2: Why can I not print?

    http://Windows.Microsoft.com/en-CA/Windows7/why-cant-I-print

    Note 2: If the problem is with the specific program (Gimp), I suggest you contact the manufacturer of the program.

    http://www.GIMP.org/webmasters.html

    Reference link:

    Picture printing: frequently asked questions: http://Windows.Microsoft.com/en-us/Windows7/picture-printing-frequently-asked-questions

    If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further!

    It will be useful.

  • All my programs have gone there program default open in Word 2007 how to change all the programs back to defuault there?

    All my programs are passed to the default opening program here as Word 2007 How do I change all the acknowledgement of programs to defuault there? I uninstalled the steps and it made no difference so I reinstalled and opened. Then he did the same as before. How can I get my programs back to default here?
    This problem started as soon as I updated my Windows 7 - 32 bit - please help. :(

    Hello mattyboy1212,

    Thanks for posting on the Microsoft answers Forum.

    Try these steps and see if you can associate the default programs. If they are associated with Word, and then change them to the correct program.

    1. click Start and then click Control Panel.

    2. click on programs link.

    Note: If you see small icons or large icons in the control panel display, you will not see this link. Click on the default programs icon, and then click the link associated with a file type or Protocol with a program . Go to step 4.

    3. click on the link to Open a file in a specific program type always under default programs .

    4. in the set Associations window, scroll down until you see the file extension that you want to change the default for program.

    5. click on the extension of the file to select it, once you have found what you are looking for.

    6. click the button of change... program above the scroll bar.

    The Open with dialog box should appear.

    7. look into options for programs recommended and choose the application you want to open it with the file extension when you double-click on the particular type of the file on your computer.

    Note: Chances are, requests described under the programs recommended will be contain more programs for this type of file, but don't forget to look at the applications under other programs. You may need to click the v to expand the list of these programs.

    Note: Click Browse... to search, through your computer for any program not shown do not want to use.

    8. click OK in the Open with window. Windows 7 is going to update the list of file associations to display the new default program to open this type of file.

    9. click the button close the bottom together associations . You can also close the window of the Control Panel if it is still open.

    10. at this stage, when you double-click on any file with this particular file extension, the program you partner in step 7 will launch and load the particular file.

    Important: Program used to automatically open when these types of files have been launched will again open these types of files. To use a different program, you just need to start the program manually and then browse your computer for the file in particular.

    If please reply back and let us know if know if it helped to solve your problem or if you still need help.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Delay in response to printer printing in a program BACK in Windows 7

    My OS is Windows 7. When I print a report in the program BACK the printer takes quite awhile to respond. Under Windows 98 operating system, the printer responds immediately. Help, please. Thank you.

    Hi Sammyva,

    If you are running a DOS application on Windows NT-based systems (Windows 2000, XP, 2003, Vista, 2008, Windows 7), you will find that your print jobs are spoulées after several seconds, sometimes minutes, especially when you print to a network printer.

    A typical program of BACK sends binary data (characters) to one of these ports (usually LPT1 :). A matrix printer can print the data as soon as it is sent to the port and before all data has been sent by the program.

    On Windows, things are different. Laser and other graphic printers must receive a whole page before making it on paper. In addition, several ongoing applications execution/printing on the same machine introduced the need for a print queue, including network printers.

    Thus, if BACK program does not close at the end of the print job printer port, then Windows doesn't work is really finished. He expects a value of timeout expires before deciding finally to spool the next job.

    If you are in this situation, you can close the DOS program as soon as he finished it. You'll see your print job start immediately, because all the handles back will be closed by the operating system itself, including the printer port.

    You can change the Windows timer above, to make the shortest. Do not set the value too low or the printer could start printing before the program BACK ended really create jobs.

    The timeout value is stored in a registry entry. TAKE CARE using RegEdit. It could be quite dangerous. If you do evil, your machine could even refuse to restart.

    In REGEDIT (START-> RUN-> REGEDIT)
    Click: HKey_Local_Machine
    then click on: System
    then click on: CurrentControlSet
    then click on: control
    then click on: WOW

    You will find the LPT_timeout property. Double click on the value that you can choose how many seconds you prefer, then restart your machine to apply the change.

    Unlike Windows, MS-DOS was a system of single-user operating. You can only run one program at a time, which could even keep the CPU set for itself, to work as quickly as possible.

    This causes a common problem for recent DOS running on Windows machines programs: the CPU hogging.

    In general, during polling of the keyboard (during a wait state), the BACK program performs an infinite loop to check as soon as possible. To BACK that caused no worries at all, but on Windows, the system could be so "busy" that no other tasks can be performed (including printing of spool, which usually begins when the DOS program has finished printing and is waiting for user input, usually in a menu).

    To check whether your own BACK program is hogging the CPU, please try to leave Task Manager open while he is on the run.

    Press CTRL + ALT + DELETE
    Click on the tab "performance".

    If the CPU usage go often to 100% using your program BACK, then you are facing this problem.

    Aziz Nadeem - Microsoft Support

Maybe you are looking for

  • my printer does not close power saving mode

    I have a OfficeJet 4500 wireless and when he's asleep he goes into power saving mode. When I try to print it does not print and I can't turn it off, the power button is unable to work.  I have to unplug the printer, then restart it to return to norma

  • 15 - ac122TU: screen brightness level FLUCTUATES

    Sometimes between the use, the display brightness varies automatically (increases and decreases). How to solve this problem?

  • Send the number to another device

    Dear all, I have a question by sending the number to another device. In my application, I use the DTMF to send the antother device number. But the speed is slow, is there not another method to send the number, such as fsk? Thank you for your help Leo

  • Constant Windows Explorer has stopped working

    Whenever I click on my screen or try to double click my shortcuts, I get an error message saying "Windows Explorer has stopped working" and then "Windows Explorer restarts" and she repeat x 2 after clicking Cancel on them. Before I got the problem wi

  • How can I get the brands during the video connection to the video

    HelloI don't know what happened with the cs6 first, I need to get my angles (marks) little linking the video to the video which means as the end point of the 1st video early in the second. For example when I drag video to another video, it allows to