OFFICEJET 6500: PRINTING INK BLACK

Similar Questions

• HP Officejet 6500 e710n-z principal: impossible to completely remove the software after the replacement of the HP Officejet 6500 printer

  I replaced my Officejet 6500 printer and removed the software using the 10 software removal tool windows.  The software has been removed, but a message appears everytime I start the computer saying that the software cannot find the 2 support files.  I can turn off the message and continue the start up, but it's still a nusiance that I would rather not deal with every time I start my computer.

  Hello

  Open Windows Explorer and type the following in the address bar:

  %AppData%\Microsoft\Windows\Start Menu\Programs\Startup

  Remove the shortcut to "Monitor alerts ink" and restart your PC in order to ensure that the error no longer appears.

  Kind regards

  Shlomi

• HP officejet 6500: HP officejet 6500 printer

  My HP officejet 6500 printer do not print one color... .we just put new ones in... He took command of printing and the paper comes out of the Virgin.

  I went to the HP support team and they had a video to help with "Troubleshooting", they showed me how to reset my printer.  There were several options which I had already tried... so I did the reset partial... .or you unplug and wait 20 min... then hold it at the same time # and number 3 and reconnect the power chord at the same time... It took 7 minutes for the printer run the test of the colours that mine passed... and my printer works now!   Thank you very much.   HP team

  Ma-donna

• OfficeJet 6500 printer E710n-z: Officejet 6500 E710n-z printer is not printing but it says printing doc is printing

  Hp Officejet 6500 printer - E710n - z does not print documents from my PC but will copy the documents placed in the tray of the printer. I set it up as a network printer with a wifi modem in another room. I used the Control Panel, click right in the image of the printer and done research failure, checked the driver (this is the last) and the control panel tells me that the document prints, but nothing happens. I am trying to print with margins of 0.5cms word documents. I tried with 0cm margins and some print and others don't which is the reason why I changed the margins to 0.5cms. I get a warning that the print area is greater than the margin and that some of the document will be lost, but that's okay for me because I am a printing table and you want to cut the paper along the lines of the grid.

  @Marmalade2,

  Looks like it might be a problem with this document, the settings or with Word. Are you able to print from other applications/programs?

  I would like to continue you here: How to troubleshoot printing in Word failures

  I'll watch for your reply.

• HP officejet 6500 printer does not print

  Original title: hp officejet 6500 printer

  I plugged a new HP printer and officejet 6500 computer fax and I cannot print
  We checked what the problem
  It seems to me
  I have another program of the not very active lexmart printer but disturbing new printer
  The problem is that you cannot remove the old software
  She does not appear in Control Panel and I don't know how to solve the problem

  Thank you

  Rachel

  Hi rachel,
   
  I suggest that you follow these steps and check if this helps solve the problem.
   
  Step 1:
   
  Run the printer Troubleshooter and check if this solves the problem.
   
  Step 2:
   
  Check if you find drivers lexmark:
  
  a. log on as "administrator".
   
  b. go to the start menu and in the search box type "MMC", you will see the Management Console Microsoft shortcuts appear in the start menu;. Click on it.
   
  c. back up the file menu and select Add/Remove snap...
   
  d. then scroll down in the list and select the "Print Management" snap-in and then click on 'Add '.
   
  e. in this screen, you will want to select "Add the Local Server", tap on finish, and then click ok.
   
  f. then you can scroll the name of your computer, select the tree drivers and then right click on the driver you want to delete and select "remove driver Package.
   
  h. ensure that you restart your machine before trying to add new or different printer drivers.
   
  Let us know if it works.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• HP Officejet 6500 E709n ink printing - black not printing

  I have a printer HP Officejet 6500 E709n and for some reason the black ink is not printing.  Color cartridges work fine.  I have even changed the black, cleaned cartridge and print head alignment, uninstalled and reinstalled the printer, but nothing solved the problem.  I was wondering if the color management profile has something to do with it.  Help, please!

  Thank you!

  mickicarter wrote:
  

  Tell me how to solve this problem.

  See the post here.

• HP Officejet 6500 a Plus: black ink cartridge does not print

  I have a HP Officejet 6500 a and have an operating system of Windows 10 on a Dell Inspiron 15R.  The printer does not print any black ink. I have genuine HP cartridges and the black cartridge is about 75% full. It was working properly until this morning. I downloaded your troubleshooting and everything seems fine. I ran the program cleaning head several times, but I can't always get black ink on a page. The other colors are fine. After the second head cleaning, I got a very small black image, but head cleaning has resulted in no black ink. I made sure that the wind had been reached on the cartridge and this problem occurs with wireless and hard wired connections. Time before, it happened and when I replaced the cartridge, it worked. After reading some of the messages on the map, it seems not to be the solution. I also hesitate to throw a cartridge that is only 25% used. Can you help me?

  Hello @robertj138,

• OfficeJet 6500 has more - black print cartridge will not print - other colors will be printed

  OfficeJet 6500 has more the black cartridge will not print.  I put in a new cartridge, so it is there

  ink.  The printer works, because the other colors of printing.  It worked very well and when

  printing, black has slowed and now does not work.

  I called technical support.  Megan has been very helpful to me through the steps to

  clean the print head.  Unfortunately, the black cartridge still does not print.  I have

  has ordered a new printer, the 6700.  I appreciate the help of Megan and will be happy to

  have a new printer.

• OfficeJet 6500 prints a bright black text and blur gray/mast

  
  

  Also, I have the OfficeJet 6500 and had the same problem.  Black text was printing with a mixture of colored inks rather than black ink, resulting a gray, fuzzy text.   I finally found a solution.  In each application under Page Setup, there is an option called "Format for".  Mine was created for "any printer".  I changed that to "Officejet 6500 E709n [830E4A]" and now it prints black very well.  I have a Mac running 10.4.11.  I hope this helps.

• Do my HP OfficeJet 4620 print in black ink only, permanently.

  I want my printer to always print in black only, on the quality of the project. I went to devices and printers > Printing Options > advanced and changed printing in grayscale only for "black ink". I also made the same change on the page I want to print and go CTRL + P > properties > advanced and making the same changes.

  However, my printer automatically returns to print in color after only a single document i.e. whenever I print a new document, the changes are cancelled and it is up to the color.

  It's much too much time to repeatedly change the settings everytime I have print something, I need to print about 70 separate documents every morning! How to make this change permanent?

  I use Windows 8 if that helps.

  Thank you!

  Hello MarkC-S,

  Welcome to the HP forums!

  I understand that you tried to change the printing parameters for "Black ink" only, but it is up to color ink. As you said, the print settings seem correct and it should stick permanently. How is the printer connected? USB or wireless? I recommend you to uninstall the software.

  Please follow this HP document uninstall programs and features.

  Then clean your Temp folder on your computer:

  1. On the keyboard, press the Windows key and the 'R' key, and then type %temp%. Press ENTER.
  2. Press 'Ctrl' and 'A '. This will highlight all. Right click on your mouse and select delete

  Now, install the full features on the site of HP software here. Choose your operating system that is appropriate; 32-bit or 64-bit. If you need help to install the software, please follow this HP document here. Choose your correct connection type.

  Once the installation is complete, please let me know if the 'black ink printing"stick this time!

• OfficeJet 6500: Print head cleaning Cycle - why not choose a color?

  I'm having a problem with a single color (magenta) print does not correctly. I've had problems before with black. Why the prinhead cleaning cycle does not allow the selection of a single color for cleaning? Why should I lose the other colors of ink when there is only one that needs to be cleaned? I know that HP wants to sell ink, but be reasonable! That I had problems that appear only after you HAVE installed a new ink tank. And it has not shown using a cartridge to power after best-use-by-date. My guess is that if the ink cartridges are not stored properly the use-by-date means nothing.

  There are a few components of the automatic cleaning cycles.  There are a set of wiper rubber that moved across the printhead to wipe or scrape debris from the print head.  All wiping little ink is spit of each nozzle to lubricate the wiper and help clear the clogged nozzles. The wiper is built on a unique sled with a motor that moves the wipers back and forth.  Allowing single color cleaning would require a much more complicated mechanical system, with four distinct and motors wipers to control.  (The wipers should be dedicated for each color.  She would cause the nozzle clogging if the black ink is allowed to mix with the color and would cause if different colors used the same color mixing wiper.)

  Similarly, for your Officejet 6500, there is a pump system for a more energetic cleaning or for initial priming of printhead.  If it was designed for a single use of color, then a more complicated system, with four independent pumps and controls.

  A Mater of reliability and economics, it is not practical to have separated in level printers cleaning cycles.

• OfficeJet 6700: print in black only

  I am wanting to print in black only. I removed the color cartridges printer doesn't like that we

  So, how can I disable the color cartridges?

  John

  Hi jozz71,

  If you are wanting to use the black cartridge for printing, you can follow step 2 in this document to change the print settings to print in black and white:

  http://support.HP.com/us-en/product/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/document/c04331666

  Please be aware that you don't need two ink cartridges to print.  The printer uses little color for printer maintenance.  This interview is described in the document I have attached.

  Once the color cartridges is completely exhausted you must replace it in order to print.  After this setting the printer to print in black and white will minimize the used color and make it last longer.

  I hope it's useful for you.

  Jean

• HP Officejet 6500 E709n: HP Officejet 6500 E709n - ink system failure error message.

  I have a printer HP Officejet 6500 E709n.  I get the following error message when I turn on the printer:

  'Ink system failure.  "Please turn printer off, then on.

  I then do as instructed and turn the printer off, but then the whenever I re - turn on the printer, I get the same error again.  The printer is now fixed to the top and none of the buttons on the printer works except the Power button on / off.

  Any suggestions on how to proceed?

  Hi @recooke,

  Welcome to the Forums of HP Support! I see that you can not use your HP Officejet 6500 Wireless. You get a printer fault to "turn printer off and then on again" you did without success.

  Please perform a hard reset:

  1. disconnect all cables and cards of memory in the printer.  Unplug the power cord, directly from the back of the printer when the printer is still on.

  2. unplug the other end of the power cord.

  3. If there is a power supply on the power cord, disconnect one end and reconnect it.
      
  4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup).
      
  5. connect the power cord to the back of the printer.
      
  6. the printer should automatically power back upward.  If not, turn it on with the power button.

  7. try to make a photocopy (if your printer is an all-in one) before you connect the cables from the printer.

  8. connect the other cables needed to the printer.

  It is recommended that the printer is plugged directly into a wall socket to ensure a uniform level of power.  Sometimes, when plugged into a surge protector or battery backup, the quantity of electricity is not received by the printer.  Power problems can cause printing problems.  It is particularly important to be plugged directly into a wall outlet with wireless connectivity problems, "sleep mode" and other power problems.

  Any change?

  If you still see the error, please check your Inbox. I sent you a private message on the Forums.

  Response with the result. I hope this helps.

  Just say thank you, please click the ' Thumbs Up ' button.

• 6500, printing problem - black

  Like others, I suddenly have a problem with black printing on my 6500 (OfficeJet) 6500 E709a.  I tried all the corrections to be made, and nothing has worked - but here's the new twist - it will print what is levels of gray (less than 100% black) of the computer.  I can take a document, change the font color on portions to any color, MORE a few gray and the colored part and the gray part will print.  But black is a complete no-show.  Try to copy the glass produced also no image when you use BLACK, but a color copy will copy the colors and gray - but once again nothing is true black.  I have had this printer for a few years, but it probably printed total of less than 300 pages.

  HI JBM - PA

  I understand that you can not print in black.

  I have included a document not to be able to print in black.

  Make sure that the vents are properly ventilated and cleaning of the print head. Just in case it is a different document then you have already tried.

  I have also provided a document to soak the printhead to try to Ciara_B post. Given that you've tried the printhead of the other device, it is more likely is a hardware problem with the unit.

  If these steps do not resolve the problem I recommend you call HP Technical Support to get help to see what other options are available to you.
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

• OfficeJet 6500 scan flat black

  So I have problems my Officejet 6500 (implemented on a wifi network) to analyze correctly.

  It used to work perfectly. However, he has recently stopped sweeping and now only provides a black image (although the overview scans work perfectly).

  I use the latest version of Snow Leopard and picture Capture to scan (again, on a Wifi network).

  Any ideas that I can do to fix this?

  Thanks in advance!

  OK, let's test the printer by making a copy of a document to the printer.  OK it works?

  If he copys OK, let's reset the printing system (and scanning) on your Mac:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.