OfficeJet 6600: Cartridge installation

They gave me an Officejet 6600 without cartridges installed, now I'm stuck on the installation with an error msg that says to use cartridges Setup.  Is there anyway around this step?  Thank you.

Hello Franka25,

You will need to call the HP Technical Support to get cartridges SETUP because they are not available outside HP.

Please call the HP Technical Support for assistance.

If you are in the United States, the toll free # is 1-800-474-6836 .

If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

Tags: HP Printers

Similar Questions

  • OfficeJet 6600 Gets the message of Network Installation fails when you try to install

    Hello

    I have the worst time setting up my new printer wireless Officejet 6600. I work with a wireless-N router that was purchased less than a year ago. I have other wireless products that work well with the internet, so I do not see there is a connectivity problem.

    The test of the printer indicates that everything is OK:

    Wireless on - PASS
    Wireless - PASS work
    Signal quality - very good
    Connected - PASS

    etc, etc.

    I ran through all the troubleshooting I can find and nothing works. I have disabled the firewall, unplugged my router and modem, disconnected the printer, tried to implement on its own IP address. The installation wizard finds her and tries to implement, but I only get the message that it was a "network installation without success.

    Has anyone experience this problem?

    Any new ideas on troubleshooting are welcome.

    Thank you
    Liz

    Hello

    Thank you for your comments. I didn't expect such a quick response, which was great.

    I move the printer to get a signal 'excellent' and tried the other steps you listed.  Through some googling more, we discovered that we needed to do the following:

    Go to the control panel

    Select Printers and faxes

    Right click and select Properties

    Select the Ports section

    Add the port to the IP address of the printer displays

    Not sure if this is the ideal way, but of course, it worked and I am now a happy customer. Hope it helps someone. I'll still Bravo for having responded so quickly.

    Thanks again!

  • OfficeJet 6600: replace color ink cartridge black

    I have a HP Officejet 6600.

    I have ONLY prink black and gray, but the other color cartridges run out.

    Can I replace Magenta, Yello and blue cartridges with black cartridges?

    Thank you!

    Because some ink for color cartridges are used to help the black ink.

  • Re: How to do a reset on an Officejet 6600 e-all-in-one C155A

    I can't use the screen touch because it allways says, missing or doesn't have a printhead with the installation catriages in, and it will not identify new catriages.

    Hello @bk85,

    Welcome to the Forums of HP Support!

    I understand that you get the message "Missing or has no print head" on the front panel of your HP Officejet 6600 e-all-in-one printer. I want to offer my help now to resolve this error message. Now, you specify in your message that you get this error message while using the configuration of your printer cartridges. If your printer has never been used before you need to use cartridges Setup to initialize the print head system in your printer. However, if you have used the HP Officejet 6600 in the past with cartridges installation, you can use new cartridges without problem in your machine. In saying this, the print head message you get refers to the part that the cartridges will fit. The printhead "reads" the cartridges and put the ink on the page. If the print head is defective in your printer, new cartridges will not solve this problem. On the contrary, a replacement of the entire unit may be needed as the print head is a non-replaceable element in your printer.

    Can I have it please click here to access the troubleshooting step designed to resolve this error message. If the error persists after completing a replacement printer reset would be necessary. If you need a replacement, I highly recommend contact our telephone Support queue to explore the additional hardware options.

    HP Technical Support can be reached at the: 800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    Please let me know if the reset solves the printhead error you receive. Good luck!

  • Portable printer HP Officejet 6600: need of digitization program

    I bought my printer HP Officejet 6600 in January 2013.  I've installed all the programs on my old computer (Windows Vista). With the installation, I was able to print electronically, and there is a stock of Scanner program that allowed me to scan a Document or Photo to my computer. I recently bought a new computer (window 10).  I tried to use my HP disc to download these printer programs but was unable to do that because I got a message that the disc did not support Windows 10.  Can you help guide to get the programs of HP that I could access and download to my new computer which would give me the possibility to print electronic and scanned documents and photos (not via the USB port)?

    Why don't you just download the software Win 10 out of the HP web site for your printer. A simple search returns... http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6600-e-all-in-one-printer-series---H7/4322968/model/4323587

  • OfficeJet 6600: iPad suddenly can not find wireless HP printer.

    iPad, suddenly cannot find a working HP officejet wireless printer!  He worked recently.

    Hey @dburbage,

    Welcome to the Forum from HP Support.  I understand that you are unable to print from the iPad using your HP Officejet 6600 e-all-in-one printer.  I want to help you with this and can have steps that you need to restore this functionality.  What you describe, it seems that you use AirPrint.  I will answer my advice for this type of installation, but if you use ePrint, please let me know and I'll give the information you need.

    You have confirmed that your printer is connected to your wireless network?  Button on the front panel of the printer the wireless icon and make sure that it is connected and displays an IP address.  If this isn't the case, run the Wireless Setup Wizard to restore connectivity.  If you are connected, powercycle your equipment as explained below:

    1. Unplug your modem/router
    2. Turn off your printer and your iPad
    3. Wait 60 seconds
    4. Plug in your modem/router back in and wait that he reconnect to internet
    5. Turn on your printer and once it starts up as normal, confirm that it is still connected to your wireless network
    6. Turn on your iPad

    After completing these steps, you are able to connect your printer with the iPad?  Please let me know the result of your troubleshooting by responding to this post.

    Have a great day!

  • OfficeJet 6600: Failure of printer, no error code

    Down printer, no code error.  Tried troubleshooting tips; Reset no has not worked and cleaning of copper on the ink cartridges, not working anymore.   Printer 3 years so out of warranty.   This printer is in a holiday home and I remove the cartridges in the winter.  Is this a problem?  Is there anything else to try, or do I need a new printer?  Tried to submit the form to contact HP 3 times for nothing helped... the site could use improvement.

    Remove the cartridges to store the printer for the winter is a major problem - which cause the printhead not replaceable to dry out, leaving probably clogged ink residues.  In the future if you have a printer with separate ink supply and print (like the Officejet 6600) heads the cartrdiges never be removed from the printer for more than thirty minutes at a time, and the printer should never be put off with the cartridges removed.

    The following may help recover the printhead (maybe 10% chance).  Turn on the printer, remove the cartrdiges impression and drip hot water on the screens on the print head which would connect the ink cartridges.  I put about 3 to 5 drops in each screen.  Let it sit for a few minutes, then replace the ink cartridges.  Run three cleaning cycles in quick succession the façade or the Toolbox.  Is there an ink at all on the page?  If yes let the printer sit overnight, then repeat the process.

  • OfficeJet 6600. Works as a printer, but not able to start the scanner.

    OfficeJet 6600. Works as a printer, but not able to start the scanner.

    I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

    I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

    Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

    But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

    However, despite the property intellectual not recognized the device functioning as a "printer".

    But I need to use it as a scanner.

    Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

    Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

    Can someone, please?

    Thank you in advance.

    Hey,.

    Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

    Have a great day!

  • OfficeJet 6600: cannot connect computer laptop 2nd in officejet wireless 6600 works fine on another computer

    Assistant on the computer Vista laptop found my wireless Officejet 6600 work that runs on another computer, but the wizard cannot connect it.  Gets the error code 0 x 00000643. Looks like a software problem in the laptop Vista.  It worked before on this laptop.

    Any suggestions?

    Hi @dburbage,

    I'm looking forward to see this resolved. Thank you for your patience and perseverance. Please follow the steps in the following document and let me know the result; HP monofunctional and MFPs - Windows: during the Installation of the network, a software "Installation error 2081883401: failed to uninstall the device with serial number:..'. Error Message on the computer.

    Thanks, I look forward to hearing back on your part.

  • HP OfficeJet 6600: HP OfficeJet 6600 hangs

    Hello

    my HP OfficeJet 6600 just hangs (freeze) on every two days with WIFI and '? LED lights up on the display, no response to button presses and unable to stop using the switch, so I have to pull the power cord each time. The device also gets lost in the WIFI network, print clients show "connect to a printer" forever.

    This is happening now for months, began a few months after the purchase.

    Also the driver repeatedly rants on the use of non-genuine print cartridge, which is clearly not the case and delivers also warnings to the subject of print head blocked. No movement of the head at the opening of the front service door.

    How to proceed?

    I have not found a partner of local service in Austria via the search function of the HP Web site.

    Thank you.

    Hello

    Thanks for the reply.

    I'm a COMPUTER technician and so have already checked the options user as software updates day and follow-up of the FAQ/knowledge base documents without success. I finally found a way to communicate directly with HP support and today I got a response.

    Thanks for help

  • Portable printer HP Officejet 6600

    The printer message is "there is a problem with the printer or the ink system, the printer Tower, then on it." I did this as unplugging the power supply. I also replaced the ink cartridges and checked paper supply and rolls. The message remains. Any suggestions?

    MB

    Hello @mmoo,

    Welcome to the HP Forums!

    I understand that you receive a message on your ink system indicating Officejet 6600. I will do my best to help you! Please make sure that the printer is connected to a live wall, not a surge protector. I just want to see if that makes a difference.

    Please follow this HP document 'Problem with ink system' error message. If you receive the same question, please contact HP technical support for further assistance. Click here to read: worldwide Contact HP.

    Good luck.

  • HP Officejet 6600: problem with the printer or ink system

    I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

    Hey @popcorn101,

    Welcome to the Forums of HP Support!

    I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

    I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

    HP technical support are available by clicking on the following link:

    Contact HP support

    (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

    (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

    (3) Once finished, click on the 'Show the Options' icon in the lower right.

    (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

    I wish you good luck going forward with this!

  • 'Open doors' error on HP OfficeJet 6600

    Hello

    I have a printer HP OfficeJet 6600. After I changed the 932XL with a new black print cartridge (original), I get an error: door open, with the message: "the door or lid should be closed to print. Make sure it is completely closed. »

    I checked the front and rear, door as well as the top cover (copy/scan), and all of them are CLOSED

    Any help? Any clue? Any idea?

    Thank you

    CAT

    Yes. I solve the problem, but in a way no, proffesional.

    I discovered that, when changing the black cartridge, a small pin located in the upper right of the front door, was broken (reliability?, quality?).

    Then I discovered that the PIN around which the Panel is rotating... is not only a PIN (hinge), but, if it is pushed in (horizontal movement) can act as a sensor push-pull. I stuck the "pin" with a small piece of paper o, I closed the door (with the broken ankle and... it works.)

    Hope that my non-professional explanation has been authorized.

    Kind regards

    Catalin

  • OfficeJet 6600 - reports HP Connect "problem with the printer.

    I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

    Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

    Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

    On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

    Hope that makes sense, but post comes back with other questions.

    Best.

  • OfficeJet 6600: HP Officejet 6600 will analyze a computer Windows 10

    I have a HP Officejet 6600 - H711a/H711g e-all-in-one printer. Since the upgrade to Windows 10, I was not able to scan to the computer. I am capable of copy and print without any problems. I've done several reboots, power disconnects and reboots and driver installs / updates, removing, re - install etc...

    HP Print/SCan doctor reports that it solves the problem, but it happens. Problem continues to exist.

    Hi Griso8V,

    The pictures help, thank you! Please check this page for the steps fix your connection scanning: Scanner network connection is lost (Windows).

    I realize that you already have some of these steps, but please follow all the steps in the order presented here.

    When you get to the step to uninstall the software, please go the extra step to ensure that the printer is removed from "Devices and printers" in the control panel.

    When you reinstall the software, be sure to choose the full software and driver. If you are installing the base driver, you will not be able to scan to PC on the printer control panel.

    Please let me know if this solves your problem,

Maybe you are looking for

  • Arrested podcast download recent episodes - 502 errors

    I host my podcast using Blogger with files stored on Google Reader, and an RSS feed by Feedburner. Here is my feed: http://feeds.feedburner.com/WhatHappending I posted the last 29 episodes without any problem, but last night when I went to post episo

  • Sam L20-183: Pioneer DVD - RW DVR-K16S cannot read DVD

    Hi all! I have the Satellite L20-183 with Pioneer DVD - RW DVR-K16S player. This is a new computer, I bought it a week ago. The problem is very strange, after several days of use of the laptop drive does not read or write DVD! The process of reading

  • Satellite Pro L - how to get the 2 GB RAM recognized?

    Hi all, I'm new to the forum and I cannot get my laptop to recognize kingston DDR2 2x1GB two identical cards. I first had 512 MB card and replaced, which, with the cards Go too 1 booted up and system show only 896 MB so asumed 1 card was defective. 1

  • Streets & trips - suggested improvements

    I have been using Microsoft Streets & Trips for many years. I mainly use it to plan my itinerary for vacation every year. Each year, I have about 2-3 weeks of vacation and go driving. I spend a lot of time before my trip by selecting my itinerary, id

  • Insert Varray values in a cluster where the table is

    Hei, I use the openG libraries. I have a HAND in cluster that has 2 groups A, B that contains the different controllers (bool, strings, integers, enum) and a C array which has a cluster that contains also various controllers. What I want to do, is to