OfficeJet 6600: ink

Similar Questions

• HP Officejet 6600: ink cartridges

  I only use black ink.  Do I have to replace colour cartridges whenever the black is empty?  If so, can I replace the color cartridge with all the cartridges black for useage more long?

  Yes. Read the link above. all of this.

• HP Officejet 6600 Guard giving the message there is a problem with the printer or the ink

  HP Officejet 6600 Guard giving the message there is a problem with the printer or ink. We have already tried to turn off then, have you tried unpluging and nothing works

  OK so I solved my problem normally my printer tells me what was low on ink im although there no and homesick, that I had to replace an ink catrige and his works now

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!

• OfficeJet 6600: replace color ink cartridge black

  I have a HP Officejet 6600.

  I have ONLY prink black and gray, but the other color cartridges run out.

  Can I replace Magenta, Yello and blue cartridges with black cartridges?

  Thank you!

  Because some ink for color cartridges are used to help the black ink.

• Print in black ink only - HP Officejet 6600

  I have a printer HP Officejet 6600.  Is there a way to set the default value of print in black ink only?  Currently, I have to do it every time I print a document in the office/computer laptop preferences.

  What operating system? In general the settings changed in the folder printers 'stick', changed settings in an application apply only to the local instance of the application.  For example Windows 7: click Start, devices and printers, right click on the Officejet 6600, printer properties, select what you want to the default settings, apply, OK.

• How to show the ink levels on the computer for Officejet 6600

  How to show the ink levels on the computer for Officejet 6600

  What is the full product name or product number?

  is your printer?

  This is the Manual of your printer the following image was derived.

  You can use the printer's built-in web server to get the status of the printer information from a browser.

  

• OfficeJet 6600: Failure of printer, no error code

  Down printer, no code error.  Tried troubleshooting tips; Reset no has not worked and cleaning of copper on the ink cartridges, not working anymore.   Printer 3 years so out of warranty.   This printer is in a holiday home and I remove the cartridges in the winter.  Is this a problem?  Is there anything else to try, or do I need a new printer?  Tried to submit the form to contact HP 3 times for nothing helped... the site could use improvement.

  Remove the cartridges to store the printer for the winter is a major problem - which cause the printhead not replaceable to dry out, leaving probably clogged ink residues.  In the future if you have a printer with separate ink supply and print (like the Officejet 6600) heads the cartrdiges never be removed from the printer for more than thirty minutes at a time, and the printer should never be put off with the cartridges removed.

  The following may help recover the printhead (maybe 10% chance).  Turn on the printer, remove the cartrdiges impression and drip hot water on the screens on the print head which would connect the ink cartridges.  I put about 3 to 5 drops in each screen.  Let it sit for a few minutes, then replace the ink cartridges.  Run three cleaning cycles in quick succession the façade or the Toolbox.  Is there an ink at all on the page?  If yes let the printer sit overnight, then repeat the process.

• OfficeJet 6600/6700: How can I stop my HP Officejet 6600/6700 stop printing reports?

  I just installed a new HP Officejet 6600/6700, but whenever I have to send a fax it produces a report. If I misdial or there is no answer, it also sends a report. I see these just a waste of paper and ink. How can stop the production of reports - I have looked through the manual but find nothing in there to help. Thank you.

  Hello

  Please try the below mentioned steps that should solve the problem.

  On the front panel of the printer

  Press SETUP (wrench) > Fax Setup > Fax reports >
  the Fax Confirmation Off = value
  value = Off Fax error report

• Portable printer HP Officejet 6600

  The printer message is "there is a problem with the printer or the ink system, the printer Tower, then on it." I did this as unplugging the power supply. I also replaced the ink cartridges and checked paper supply and rolls. The message remains. Any suggestions?

  MB

  Hello @mmoo,

  Welcome to the HP Forums!

  I understand that you receive a message on your ink system indicating Officejet 6600. I will do my best to help you! Please make sure that the printer is connected to a live wall, not a surge protector. I just want to see if that makes a difference.

  Please follow this HP document 'Problem with ink system' error message. If you receive the same question, please contact HP technical support for further assistance. Click here to read: worldwide Contact HP.

  Good luck.

• OfficeJet 6600: upgrade of Windows post 10

  After upgrade Windows 10 on 29/07/2015, my 6600 Officejet continues to work and print. but when I click on my desktop icon to view ink levels or that scan a page comes up saying install new printer.

  In the control panel Officejet 6600 is indicated as being installed and work and notice that in another thread, there is a link for HP printer drivers that says if the upgrade of Windows 8.1 for Windows 10 printer will continue to work. I suspect that a Windows 10 driver is needed somewhere, but cannot find one in the page Web of HP.com drivers. Also when I followed the links in the page that appears when I click on my icon it doesn't drive anywhere which resembles a desktop printer software download.

  Ex Airways.

  Had another go to resolve the issue today. Uninstalled and reinstalled printer software again. This time success all functons printer now satisfactory. I don't know but perhaps HP have written some new drivers for Windows 10 of the day overnight?

• 6600 ink

  I have an Officejet 6600.  I get an error message saying: I'm out of ink but I do not think I printed more than 30 pages (and all in B & W) since the departure of ALL of my cartridges.  I really don't think that these cartridges are empty.  Please let me know what I can do!

  Hi gt300, 6600 OJ is an IIC system (individual ink cartridges), and all the cartridges are required for the printer to function. If your impression is all black that you would be better suited to a textual IPH printer (integrated print head), as many of them allow the print reserve (in black only)

  FYI, there is more info in the link below

  Using ink in inkjet printers.

  http://h10060.www1.HP.com/pageyield/articles/us/en/InkUseage.html

• HP Officejet 6600: Horizontal lines when scanning (digital glitch, no debris on scanner)

  Hello, can anyone advise on how to fix the horizontal lines that appear when you use the flat bed scanner (Hp Officejet 6600)?

  This function scan/unit worked well for a year and suddenly breakdowns at each attempt to analyze.  I went through several steps to try to resolve, including zero/restart the printer and the computer.   To clarify, this not a question of debris/ink etc on the bar of the Analyzer or glass; It's a digital bug (see attached image screenshot).

  I can't find many references about it on the HP forums or elsewhere.  If it helps you to offer a response, FYI I use a macbook, which has worked well with this scanner/printer until recently with this problem.  The printer function works fine.  Finally, I just downloaded the latest update from HP for this device through the App Store and it still gives the same error.

  Thank you for your consideration.

  Jamiwa

  @Jamiwa, welcome to the community of HP!

  I certainly hope that I can help you with the unrest sweeping have horizontal lines across your scans to your Officejet 6600, you notice your Mac running Yosemite. To add the steps that you have already tried, here are some of my suggestions for you.

  Try these steps in the following order:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click here to download and install the full function driver: 6600 Officejet HP e-All-in-One Printer series - H711 Full Feature Software and Driver
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers
  6. Try to scan the image

  Also try to make a copy of the front of the printer to see if they also show the flaws.

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  I hope to hear the result! If you wish to testify of my help, click on the "thumbs up" below!

  

• "HP printer Assistant" for HP Officejet 6600 WON 'T run.

  Windows 7 64 bit

  NO error message

  NO changes to the system until after it started then improved then just put update HP firmware

  It worked yesterday.  When you have selected the "HP OfficeJet 6600" desktop on the desktop shortcut, he ran a sreen which allowed you to print, scan, fax, showed levels of ink, etc.

  Now: he comes up with a window of 'Control Panel\Hardware and Sound\Devices and Printers\HP Officejet 6600' that offers you 4 choices and the one that seems to offer printing/scanning, IE. "HP printer aSsistant"... which has no effect when you select.

  IF you right click on "HP printer Assistant" on this screen, it gives you the possibility to make a shortcut.  The shortcut created and has properties where the 'target' is never developed so that you can not even say that he's not trying to run.

  Upgrading of the Roque?

  

  Hello world!

  I called customer service and talked to a nice girl named Stephanie.  She was very helpful and tried exactly the same things I did the week last with the same results...  However, I decided to do another printer to the printer from my last more (410).

  I sincerely advise guys to call directly, and your product is new, you will get a very good support and give advice on what to do.

  We get a new printer and expect us it to work and HP understands that - simply call and your problems are more likely to be resolved here.

  Guys good luck and I hope I never come back on this forum (I got a 2 year warranty on my new printer for $ 1)...

  Ciao!

  Suzie

• Re: How to do a reset on an Officejet 6600 e-all-in-one C155A

  I can't use the screen touch because it allways says, missing or doesn't have a printhead with the installation catriages in, and it will not identify new catriages.

  Hello @bk85,

  Welcome to the Forums of HP Support!

  I understand that you get the message "Missing or has no print head" on the front panel of your HP Officejet 6600 e-all-in-one printer. I want to offer my help now to resolve this error message. Now, you specify in your message that you get this error message while using the configuration of your printer cartridges. If your printer has never been used before you need to use cartridges Setup to initialize the print head system in your printer. However, if you have used the HP Officejet 6600 in the past with cartridges installation, you can use new cartridges without problem in your machine. In saying this, the print head message you get refers to the part that the cartridges will fit. The printhead "reads" the cartridges and put the ink on the page. If the print head is defective in your printer, new cartridges will not solve this problem. On the contrary, a replacement of the entire unit may be needed as the print head is a non-replaceable element in your printer.

  Can I have it please click here to access the troubleshooting step designed to resolve this error message. If the error persists after completing a replacement printer reset would be necessary. If you need a replacement, I highly recommend contact our telephone Support queue to explore the additional hardware options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if the reset solves the printhead error you receive. Good luck!