OfficeJet 6700 Premium AiO: Copy and scan simultaneously

Good day to all,

I was wondering if my Aio Officejet 6700 Premium E supports simultaneously copying and scanning. As I need to have a paper copy of my report in my patientfile and I also want to do a backup on my hard drive digital camera.

Thank you in advance for your time and wisdom.



Sorry, no.  The 6700 Officejet cannot copy and scan in a single operation, you must run the original twice now, once for the copy and one for the scan.  You can consider scanning to a file on your computer, then print this file.  This would confirm the paper copy will match the scanned document and would take only a passage from the original by the document feeder.

Tags: HP Printers

Similar Questions

  • OfficeJet 6700 premium print date and time on the fax history report

    Running Windows 8.1 on my OfficeJet 6700 Premium AIO H711n fails to print the date and time on the historic report of the fax.  I need this information to check the box of cylinder head of the fax the documents have been sent.

    Hello dcflorida,

    I did not the 6700 but on another machine, I had to 'reset', time and date in the printers preferences.

    If you haven't done it yet, go to Settings/preferences/time and Date on the All in One printer set up (once again if necessary).

    IF your machine does not have the time / date on the history report, it includes it in the Confirmation page?

    Here is the link to the Manual too.

  • Do not print Officejet 6700 Premium: Magenta, yellow and new cartridges, others do it.

    Replaced all four "setup" in new ink cartridges, they were recognized, show "full ink" on the Panel, but only cyan and black printed, yellow and magenta only. Test print on printer directly report page: same result, cyan and black are OK, yellow and magenta will not print. Any help? Bought these original cartridges again, 933XL.

    Thanks for the link/document showing how to solve my problem. I had already done most of the steps proposed but remained the problem of horizontal white streaks in magenta during Diagnostics.

    I called HP support, this time to connect to a branch in the United States,-(not supported by the 'HP' I had initially called with foreigners, answering the line who tried to get me to buy a service contract).

    HP will send a replacement magenta cartridge and I'll see if that solved the problem. Otherwise, I was told my printer is still within the warranty and will be replaced by another which has been refurbished.

    That will be fine. However, it is always frustrating to pay $42.00 for the new original HP ink cartridges, then half their levels making cleaning head printer and diagnostics on an old printer for 2 months of use.

    BTW: to all those who want a good HP assistance number: 1-800-474-6836 or 1-650-857-1501

  • Windows 7 vs HP Officejet 6700 Premium

    My HP Officejet 6700 Premium at work was scanning PDF and conversion to editable WORD format, as my work converted to Windows 7, the feature is no longer available.  (I have the original cd for printer). This can be corrected?

    Welcome to the DNico forums,

    I understand that you are looking to analyze text editable with Windows 7. I will do my best to help!

    You will need to install the full features software: HP Officejet Full Feature Software and Driver

    Click this link for instructions on scanning in the form of editable text (OCR) click on How to scan with HP software, how to scan as editable text: how Scan: Windows 7

    Here's a screen shot I took as an example:

    Happy Thursday

  • HP Officejet 6700 Premium: Don't scan and the scan dialog box will not open

    Since I upgraded my computer to Windows 10, I'm unable to use my scan on my HP Officejet 6700 Premium function.  I can't even open the scan dialog box to look at the options etc.  I tried to find 'Scanner and printer' in painting, but it does not recognize.  Any suggestions?  I already deleted the printer and re-installed.  It was working fine before on Windows 8.


    Thank you for using the HP forum.

    You can download and install the software COMPLETE features of HP printing for your operating system:

    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    Hope that helps.

  • error message unable to copy or scan HP officejet 6700 Premium

    I get an error message on my HP Officejet 6700 premium that it is impossible to copy or scan.  How can I fix this problem?

    Thank you.

    Gail Holcomb

    Yes I see! I'm glad that you solved the problem!

    Please post back however if there are ongoing problems.

  • HP Officejet 6700 Premium: IHP AIO Remote app does not connect to my printer.

    Tried to use HP AIO remote with my printer HP officejets 6700 Premium. I get a message that is offline. However, it is not. I tried to turn my printer market and restarted my computer. It did not work. I noticed that the

    the IP address for my printer HP officejets 6700 Premium on the app is not the same as the address of my printer. If this is the problem how can I fix it? In any case, please help. I use a Dell with Windpws 10 laptop


    Hello @wwwally, greetings!

    Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.

    Going through your post, application remote control HP AIO is mainly used in mobile devices and not in laptops.

    I suggest you download and use HP Scan and capture app to scan from your laptop Win 10. You can go to to download and install HP Scan and capture the app.

    Please let me know if that solves the problem, or if you need assistance.

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • printer has no illumination and cannot print manually - HP Officejet 6700 Premium

    I have a HP Officejet 6700 Premium - I can print from my computer, but can't print manually.  The button does not illuminate.  I can't scan, print manually.  Suggestions how to operate manually the this printer?

    Hi Beachwoodgirl,

    Welcome to the HP Support forums.   I understand that you are unable to make a copy of the front of your printer Officejet 6700.

    Please follow the steps for a Solution in the Scanner failure paper paper.  You don't specifically mention you found the error but it is what it sounds like.  You can also use HP Print and Scan Doctor for Windows.

  • OfficeJet 6700 Premium: after Windows 10 Upgrade on Officejet 6700 scanning does not work anymore - can not find scanner


    Having finally decided to take the plunge to upgrade to Windows 10, I discovered that my Officejet 6700 Premium previously peripheral work will scan is no longer.

    My connection to the device is via a wired connection with a static IP address on the printer. It all worked perfectly under Windows 7, but now, I can only print to the printer to win 10.

    I tried to uninstall the previously working software (under Win 7) and downloaded the latest version of the HP (OJ6700_1315 - 1.exe) software, which BTW is not a patch on the previous software that I'm used to using - but it did not help. Still no joy with the scanning feature.

    I tried to uninstall all software, so I tried to launch the Wizard installation HP which seemed to re - install the last set of software (as above) with the same results - I can print it, but if I try to scan using the Officejet 6700 App it appears a dialog box saying "inaccessible Scanner. Scanner communication cannot be established. Make sure that your product is powered, check the connection and esnure that your network runs correctly. ...".  Amazing result given that the application displays all levels of printer ink, and I can print - every time!

    I tried disabling the firewall - no difference, still do not see the scanner.

    Tried using other windows applications; Paint, etc. - no joy.

    I also tried the "HP Print Scan doctor and" nothing does - even, he gives up and says to contact HP support, with no details about what to tell them!

    I hope someone else out there could have had the same problem and found a way to make it work?

    Thank you!


    In case anyone is interested, I bit the bullet and did a new install of Windows 10 on a formatted drive. I then installed the same software that I had tried on the "upgrade to Windows 7" windows, 10, and everything works as expected.

    Therefore, there is definitely something wrong with the upgrade process, and the removal of the HP scanning software & resettlement never did his job correctly.

    I look closely at the list of DLLs etc., charged by the printing software, but could not detect anything immediate.

    Then, certainly in my case, a new facility was to solve this problem.

    See you soon,.


  • OfficeJet 6700 Premium e-all-in-one software limited scanning or it can be used via Photoshop?


    I use the HP Officejet 6700 Premium e-all-in-one Prod # CV078A on a Macintosh OS 10.6.8 macbook Pro (2.8 ghz Intel Core 2 Duo - 4 GB of DDR3 RAM).

    I try to run for the first time since that I recently bought this machine, and I'm running into some problems of quality. Digitization of works very well once I thought I had to use the utility software of HP scanning rather than access the scanner by Photoshop as I always had done before with my HP's Photosmart 2600 (I had for 5 years and more).

    The scanner HP scanning software (HP Scan v3.7.9 (59)) seems very limited.

    My questions are:

    • Is there a way to browse from Photoshop (or CS3, 4, 5 or 5.5) TWAIN instead of use the HP scanning software?

    • It is there no quality of analysis options other than a few easy turns, cultures and the very limited color correction, as well as certain preferences that allow adjustments to size/dpi of glass. What about scanning at larger percentages, Descreening and some more detailed agjustment image options?

    Thanks in advance.

    You are welcome

    As a general rule, the latest HP Scan 3 of the other less editing software options than previous versions of HP software.

    You can set the color settings by clicking the setting icon (). Cropping or rotating of the analysis can be done, but there is no option of resizing by the software.

    All image editing must be done with any photo editing software.

    Kind regards


  • HP Officejet 6700 Premium: Scan function screen does not come to the top when selected

    After updating Windows 10, the scan function when selected in the application wizard does not come to the top. Installed the driver updated, no effect.


    Thank you for using the forum.

    You have downloaded and installed the FULL features of HP software?

    Here is the link for convenience:

    We suggest that you uninstall the current drivers before reinstalling the software downloaded full of features.

    Hope that helps.

    Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

  • Scan to network with OfficeJet 6700 Premium


    I want to scan from my OfficeJet 6700 Premium on a network share on my NAS.

    So far I was only able to scan my computer where I needed to install a pice of software. But I want to scan directly to the network share without count it in the middle.

    Thank you


    Hello B7i,

    Welcome to the Forums of HP Support! I understand you want to scan to a shared folder (SIN) with your HP Officejet 6700 Premium. After watching the 6700 product specifications, this isn't one of the characteristics of the 6700 JO scanning, scanning capabilities include scanning to USB and PC key only:

    That being said, you need to use the computer. Have a look here in your user's Guide on Page 38, it gives you all the scan options.

    I'm sure you already know what options you have in the front of the 6700 but for later use, I'll leave that for you: the façade scanning options

    I hope this helps!

    Thank you

  • HP officejet 4630: copy and scanning does not

    Since the upgrade to Windows 10 HP 4630 Oficejet stopped working for copying and scanning options.  Print and fax options are OK.  Have updated to the latest version of the software (many times) without success.   Also checked the scan of the computer is turned on.  When you use HP Print and Scan verification pilot doctor fails (unable to communicate with the product). Follow the suggestion without any positive result.

    Have tried everything that I could find on the internet to solve the problem without success.  Any ideas what else can be done or

    the driver for scanning and copying does not work with Windows 10 in all?

    Even if I try to use the only printer with Dell computer off, still can not copy or scan a document.

    Hello! Welcome to the HP community @Stewball1313,

    I read your post about how you are unable to make copies or your Officejet 4630 analyses, and I wanted to respond with my own suggestions. As you can not copy, it is a sign of a hardware problem as copies do not involve the computer somehow. I think the question can be a failure of scan of your description, as for you to open the link I posted below and try a reset and checking the connection of power supply and then try to make a copy again. If copies are still not, I would then contact HP directly to see about a printer replacement or trade for a new unit. If you encounter other problems, let me know and I'll do my best to help you!

    (Note: the Officejet 4630 is compatible with Windows 10 and it has full functionality of drivers available for the operating system.) However, if the problem is a hardware failure, a driver will fix a hardware problem).

    All products - in - One HP - a 'Failure of the Scanner' Message displays on the all-in-one control panel and you cannot scan, copy or Fax

    Click on the thumb to below testify my help!
    Click on the "accept as Solution" if I'm you guide to a solution!

  • hp officejet 6700 premium: officejet 6700 power switch on, menu and wireless unable to connect offline

    my HP Officejet 6700 Premium

    (1) display suddenly 'offline' from my computer.

    (2) the indicator light is on, but no menu or wireless lamps are on... I can't turn on or off using the switch, there's just lit up

    ... I unplugged the power from each end and the led turns on as soon as it is plugged

    ... I have re-plugged directly into wall outlet

    ... I've tried everything on the site within my computer and HP

    ... uninstalled, then rebooted everything and re-installed

    None of the software may "detect" the printer

    My initial suspicion continues even after all that... that my printer is dead somewhere inside, and it has nothing to do with the connection to my routers, computers, etc. ???

    However, my first notes that something was wrong was when I went to print and my computer says the printer is "offline"... Of course, I checked that setting now and he was not in offline mode in the settings.

    Does anyone have a solution or the same suspicion.

    I wrote HP and have failed for 4 days.

    Thank you

    Unplug the unit and let it sit for an hour.  Plug it into the wall directly, do not use any type of power strip.

  • my hp photosmart premium copy and scan features dark gray

    copying and scanning my printer has dark gray features which becomes worse.  When this happened in the past I've corrected by disconnecting reconnecting... does not work now.  Help!

    I am so disappointed by the quality of this printer compared to my old HP printer. (

    Hi Holly,

    Follow the steps below.

    1. remove the ink cartridges and printhead Assembly and place them on a safe surface.

    2. remove all cables from the printer, including the power

    3. make sure that the power is plugged directly into the wall outlet

    4. once on the profile for 1-2 minutes the printer back in and then install the print head and cartridges when printing invites you to.

    5. try to make a copy and let me know if the problem is still there?

Maybe you are looking for