OfficeJet 6700 premium: all the settings options are locked

Similar Questions

• HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

  Printer = printer HP e-all-in-one Officejet 6700 Premium
  Model = H711n
  Number of product = CN538A
  Firmware version = MPM5CN1450AR
  Location = Ireland
  Printed pages total: 152
  Scanned pages: 58

  Other details available on request...

  I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

  A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

  I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

  Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

  After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

  I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

  I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

  At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

  So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

  I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

  Now...?

  OK I managed to make it work and I will try to explain the steps of my best.

  As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

  Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

  So I know that the printer works on at least one access point.

  Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

  IPv4 firewall protection

• some icons not showing is not the DW CC 2015, refresh button.  On the Format tab 'aglin' option is not there.  Is there a way to make sure that all the icons/options are visible? Thank you

  Hello

  New to DW.  I DW CC 2015 and teach myself with online tutorials.  Some of the icons mentioned in the tutorials are not displayed on my DW.   The refresh icon is not on the "toolbar", Format tab 'Aglin' option isn't there.  Is it possible to see if all the icons/tools/etc. are?

  
  Thank you

  Lisa

  Ensure that the tutorials you read matches that of DW you have.

  DW CC has undergone a lot of changes to the user interface since its introduction.  See the links below.  If you have no tutorials that match the version of your product, you will be lost and confused.

  List of deprecated features:

  http://helpx.Adobe.com/Dreamweaver/using/the-new-modernized-Dreamweaver-cc.html

  New features in CC 13.0

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-CC-2013.html

  New features in CC 13.1

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-131.html

  New features in CC 13.2

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-13-2.html

  New features of CC June 2014

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-2014.html

  What's new in October 20141 CC & February releases

  https://helpx.Adobe.com/Dreamweaver/using/whats-new-2014-1.html

  New features of CC 2015

  https://helpx.Adobe.com/Dreamweaver/using/whats-new.html

  Nancy O.

• Impossible to get sp2 & sp3 on recovered 2006 XP have checked all the settings, they are ok

  have followed all the steps on & above and tried to install active x 4 times still can not update recovery xp 2006

  Thanks for the comeback.  I think that your answer would greatly helped, BUT I solved it myself.  Microsoft doesn't make it very easy and does not explain that even if you find and download SP3 you decompress to run anything of him.
  My client has their computer back and completely restored & updated for updates for XP.  Thanks for your help anyway.
  Microsoft Security Essentials, Malwarebytes and Avira included.  They learn to run CCleaner Eusing and optimize each month and weekly defragmentation.
  Thanks again,

  CwynnJones the type of computer

  PS the sp3 was the problem because it wouldn't install the active X

• HP Officejet 6700 premium all-in-one. The documents will not power automatic document feeder fax.

  I can send a fax from the glass, but when I try to fax multiple pages in auto document feeder it doesn't recognize, they are there and asks me if I want to fax the glass or ADF.  I click on ADF and says original place in the ADF, and press start.  I opened the compartment in front of the ADF and it is not stuck or dirty.  Help, please.

  Hi DLreportin,

  Thanks for the reply!

  In the software you wish to select Connect new printer. Not really sure why you were running the software again if I don't believe it was part of one of my suggestions.

  If I understand well after the steps of my above after you are still unable to make a copy through the ADF?

  Did you update the firmware, or connect the printer to the wall makes no difference?

  Please let me know it's going, and if you are still unable to copy after checking these two things and then I will consider a deeper reset for you.

• HP Officejet 6700 Premium all -: print OK, but not scan

  I just replaced my old HP computer with a Windows 7 Professional 750-055xt HP computer and my printer scans is no longer. When I hit the scan button I get this message: "open the HP utility. Under scan settings, click Scan to the computer and make sure Enable Scan to computer is selected. "I don't know where to find the HP utility, so I am dead in the water. Any ideas where I could find it?

  HP technicians could not track down the problem by using the remote, so I took my computer and printer to the Geek Squad at best buy. The GS has found a couple of infections that prevent the printer to install the required software. Once the infections have been wiped out and the software installed, everything was fine. All in one day.

• HP Officejet 6700 premium: ink black only option officejet 6700 premium

  I didn't know that my ink was low and are short of cyan and yellow. Y at - it an option to print only black ink until I am able to buy more ink color?

  Some printers allow printing mode 'reserve', which means using a cartridge. While I don't know if your printer has this mode, you can check by simply removing the cartridge that you want to keep printing.

  If the Billboard in front of said something on reserve Mode, then you have luck. Please let me know if it helps.

  For more information on the Mode of the reserve, consult this document: LINK

• OfficeJet 6700 Premium Cup footnote when printing from the computer

  OfficeJet 6700 Premium all-in-one - H711n - when I print wireless from the desktop (HP), I get an extra space at the top of printed pages and the bottom is cut off.   It is a new problem.  Printer did not have this problem in the past.   Scan doctor says everything is ok.

  Hi @katy36 and welcome to the Forums of HP!

  I see you have output problems.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Also, do you have questions by making a copy as opposed to an impression?

  Please let me know what you find. Thanks for posting on the HP Forums!

• HP Officejet 6700 Premium: Unable to connect to the new network HP 6700

  I just changed networks and want to connect my HP Officejet 6700 Premium to the new network.

  In the control panel of the printer, I accessed network / Wireless Installation Wizard.  When I do, I get the message:

  Locking function

  This feature has been locked by your system administrator or the person who set up the printer.

  There is an OK button, but no other options.

  I get the same message when I tried to access a WiFi Protected Setup, and, for good measure, the default system restore.

  There is no administrator, in itself, because I'm the one who has set up the printer.  I'm rulnning a MacBook Pro on OS X El Capitan.

  Please, help me to know what I need to do to connect my printer to the network so I can print.

  Thank you very much for taking the time to answer and especially for providing additional resources should what was being offered as a solution to not work.

  I have tried your solution several times and kept getting the same message.  I tried shuttig the printer off by pulling on the power cord, stop in the right way, reverse iin, etc..  Nothing removed the error.

  Then I took the printer to a local Best Buy to show them the problem, which was at home.  We tried it a few times, and then, for no reason whatsoever (seems), it allowed us to do a reset.  No one knows what was different.

  My advice for anyone with the same problem is completely unplug it, let it sit for a while, keep trying and hope for the best.

• HP Officejet 6700 Premium: IHP AIO Remote app does not connect to my printer.

  Tried to use HP AIO remote with my printer HP officejets 6700 Premium. I get a message that is offline. However, it is not. I tried to turn my printer market and restarted my computer. It did not work. I noticed that the

  the IP address for my printer HP officejets 6700 Premium on the app is not the same as the address of my printer. If this is the problem how can I fix it? In any case, please help. I use a Dell with Windpws 10 laptop

  Wally

  Hello @wwwally, greetings!

  Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.

  Going through your post, application remote control HP AIO is mainly used in mobile devices and not in laptops.

  I suggest you download and use HP Scan and capture app to scan from your laptop Win 10. You can go to http://hp.care/2bUVkrw to download and install HP Scan and capture the app.

  Please let me know if that solves the problem, or if you need assistance.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Layer in the new file options are locked

  I created a new file and want to add new layers, but all the layer options are grayed out. I can't unlock the bottom and add new layers. Anyone know why? Thank you!

  

  !

  I thought about it. This is because the color mode is "bitmap". Now I can work on the layers after I chose to create a grayscale file.

• OfficeJet 6700 Premium e-all-in-one software limited scanning or it can be used via Photoshop?

  Hello...

  I use the HP Officejet 6700 Premium e-all-in-one Prod # CV078A on a Macintosh OS 10.6.8 macbook Pro (2.8 ghz Intel Core 2 Duo - 4 GB of DDR3 RAM).

  I try to run for the first time since that I recently bought this machine, and I'm running into some problems of quality. Digitization of works very well once I thought I had to use the utility software of HP scanning rather than access the scanner by Photoshop as I always had done before with my HP's Photosmart 2600 (I had for 5 years and more).

  The scanner HP scanning software (HP Scan v3.7.9 (59)) seems very limited.

  My questions are:

  • Is there a way to browse from Photoshop (or CS3, 4, 5 or 5.5) TWAIN instead of use the HP scanning software?

  • It is there no quality of analysis options other than a few easy turns, cultures and the very limited color correction, as well as certain preferences that allow adjustments to size/dpi of glass. What about scanning at larger percentages, Descreening and some more detailed agjustment image options?

  Thanks in advance.

  You are welcome

  As a general rule, the latest HP Scan 3 of the other less editing software options than previous versions of HP software.

  You can set the color settings by clicking the setting icon (). Cropping or rotating of the analysis can be done, but there is no option of resizing by the software.

  All image editing must be done with any photo editing software.

  Kind regards

  Shlomi

• Ghosts on pages double-sided printing second on Officejet 6700 Premium e-all-in-one

  Please can someone help?

  Printer name model e-all-in-one Officejet 6700 Premium

  Firmware MPM3CN1232AR

  Software 028.000.1315.000

  Driver 09.84.00.1173

  Win 7 SP1 64 bit

  Wired ethernet connection

  Problem

  On two-sided printing, the second side of printing on all pages is ghost. This is in particular the noticebale on verticals.

  This is true for all the qualities of printing on any documents .pdf or. doc.

  I use all the HP printing paper and original cartridges.

  I aligned the print head and checks suggested on the help pages.

  I contacted HP support, which were brilliant and replaced the printer and the duplex unit.

  They suggested that it was because I was using Office 2003 SP3 and Windows 7 but I find this problem on too but not in Wordpad v6.1 .pdf files

  The problem does not occur when scanned or copied documents are printed

  Is there a solution out there on this new printer please?

  Hi 007OHMSS,

  I carefully read through a VionAiry pointer to the post of ItalSanif with links to more articles.

  There were two main suggestions as to how to proceed. I didn't uninstall the "bloatware" and back to base for the HP Officejet 6700 Premium drivers, but I installed the drivers from the series HP Deskjet 6980 in accordance with the procedure at this link http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-7510-Duplex-Problem-y-axis-scaling/td-p/1754773 and listed below, with a few mods to include activation of unit duplex in one set of instructions.

  And you know what? This MARKET! Ghosting on the second side of all pages printed double-sided disappears to be replaced with a nice crisp clear impression. At present, all the other functions, including scanning seem not affected and function as usual, although of course the new driver (HP Deskjet 6980 series) makes the leaves of different properties.

  In my environment, I have also 3 XP machines in network connected wireless to the printer via the router and the PC Win7x64 connected by ethernet to the same router. Meant this download and the installation of the driver HP driver the HP Deskjet 6980 series for the XP PC Web page not the Win 7 x 64 because they were not present.

  I modified a bit routine and reproduce it below to help others. A/c for the original post, that was provided by the HP Technical Support. Why nobody's support services seems to know about or drivers have not been fixed I would never know.

  First turn off you will want the printer already available on the computer before you continue.

  For Win7 PC (XP is similar but not identical)

  1. Go to Start -online device and printers => then click on the "Add a printer" button in the upper left corner of the device window.
  2. Click on the button "Add a local printer" (choose this option if you do not your configuration)
  3. Check the box "use an existing port.
  4. On the drop-down list, select the option for example CN115130TP05JW , but use the correct name for the PRINTER port which is the serial number of your printer (do not use the fax entry)
  5. Now in manufacture of list on the left, select "HP".
  6. On the list of Printers to the right, select "HP Deskjet 6980 series (HP)" "
  7. "Once the pilot moved to enter in the" 'devices and printers ' window and right-click the newly added "HP Deskjet 6980 series" and select ""printer properties ' on the drop-down list. "
  8. Go to the "Advanced" tab, and then in the drop-down list next to the label of "Driver" select "HP Deskjet 6980 series.

  9. Click on the button 'Apply' - the configuration window should change it's shapea bit.

     10. in the HP Deskjet 6980 window properties, click on the tab "device settings" on the top of the window.

     11. in the list of parameters, search for "Unit duplex (for printing on 2 sides) ' and select it.

     12. once highlighted, select in the drop-down list ""Installed "; "

     13. When finished press apply

     14 now, go to what you use to print documents and select "HP Deskjet 6980" as your printer. Activate duplex printing and you should see the pages to print correctly.

  15. you can also change the name of the printer in the "Général" tab I changed it in mine to "HP Officejet 6700 with HP Deskjet 6980 pilot set shadowd duplex printing".

  I had a little problem in that, for some reason any in the document (e.g. Word / etc\ .pdf) box under the effects tab my radio button has mysteriously been on 20% until I changed it it was hard to see that there was no ghosting dialogue printer properties.

  So after complete 1 reconstruction of the printer of the original with the parts sent to HP services support for November 2012, an escalation at magnifications greater within HP (no answer) and a new printer of A...n, VisionAiry has pointed me to a solution that I had tried with DJ 450 drivers, nothing works, after a Shane_R post dated last year.

  So thanks to you and also to 007OHMSS who worked on this problem and original posters

  All I can say is that it worked for me and I am so grateful to everyone on this forum to ensure that I am sure of my eyes and mental health, looking more printed duplex printed with a shadow/ghosts and to be what they were not prepared.

  Congratulations so all round and thanks again

• OfficeJet 6700 Premium: Unable to connect to the server

  I used my 6700 for almost a year and a half to work on a secure server of company where I couldn't use many features. I recently brought home, and now I use it on my personal network of houses. I followed the instructions on reprint the code of request but were unsuccessful. I constantly get a message that my printer is unable to conect to the server. My network wireless printing has been set up and I was able to print from my phone, laptop, & office. Can someone help me please my claim code?

  Hey @bhigh904,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the services Web on your HP Officejet 6700 Premium e-all-in-one printer. I would like to help.

  When users encounter this type of problem, I usually suggest from scratch with the radio of the printer and webservices configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • The printer's front panel, press the Setup/key icon and then tap tools
  • Select Restore to factory settings

  Then, touch the wireless icon () and run the Wireless Setup Wizard to restore your network connection.

  Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  Then, press the icon of Webservices () and reactivate your webservices (necessary for scan to e-mail, ePrint and other features).

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by accepting this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• OfficeJet 6700 Premium - how to set the default print quality of 'normal' of the "draft."

  Hello

  Thank you for your help.

  I have a printer/all-in-one Officejet 6700 Premium.

  Most of the documents that I print is for internal purposes, so "Draft" quality is sufficient.

  The default factory on the print quality setting is 'Normal '. I know how manually enter and restore the "draft", but I'd rather have the defaultproject, so I have to reset it manually each time.

  I could not find how to permanently fix the draft quality defect.

  Again, thank you for your help.

  George Mathis

  Thanks George,

  which is fully answering my question indeed

  Please follow the steps below to change the quality of the printer:

  1. Click the Start button.
  2. In the menu, click devices and printers.
  3. Right click on the HP Officejet 6700 icon.
  4. Click Printing Preferences.
  5. Enter the tab paper / quality .
  6. Select the project in the area of quality parameters.
  7. Click OK to save the settings.

  Now any future printing will be in draft quality.

  Kind regards

  Shlomi