OfficeJet 6700 premium print date and time on the fax history report

Similar Questions

• How can I get my Hp officejet 6700 to print the date and time on the fax confirmation page

  How can I configure my officejet 6700 premium to print the date and time on the fax confirmation page?

  Hello

  As long as the date and time is set, it should automatically appear on the print.

  Is the date and time set correctly on the printer?

• My HP Officejet 4630e all-in-one does not print the date and time on the fax header

  I followed all the instructions of configuration / Date and time are set correctly but only name and phone number show on the fax header when sending fax.  How can I get the date and time to print as well?

  Thank you for your help

  Hi doggynut4,

  Welcome to the HP Support forums.  I understand that you want to add the date and time to your fax header.

  Your user guide indicates that only the name and fax number can be entered for the fax header (found on page 49). I even confirmed this on my Officejet 4630.  I apologise for any inconvenience this may cause.

  User's Guide e-All-in-One Series Officejet 4630

• Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

  Hello

  Someone knows how to change the time on a LaserJet MFP M127fn Pro?

  Thanks in advance!

  Sean

  .

  Hi @SeanKaneFLA ,

  I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

  This information was given by the manual on page 45. MFP LASERJET PRO.

  You may have configured these settings when you installed the software. You can configure these settings
  at any time by using the control of product or the HP Fax Setup Wizard panel.

  LCD control panel:
  1. on the product control panel, press the Setup button.
  2. Select the System Configuration and then select Date/time.
  3. Select the clock in 12-hour or 24-hour format.
  4. use the keypad to enter the current time and press the OK button.
  5 Select the date format.
  6 use the keypad to enter the current date and then press the OK button.
  7. Select Fax Setup, and then click Fax header.
  8 use the keypad to enter your fax number and press the OK button.
  NOTE: The maximum number of characters for the fax number is 20.
  9. use the keyboard to enter your company name or header and press the OK button.
  NOTE: The maximum number of characters for the fax header is 40.

  (Windows) HP Fax Setup Wizard

  1. click on start and then click programs.
  2. click HP, click the name of the product, and then click Fax Configuration Wizard.
  3. follow the on-screen instructions to configure fax settings.

  I hope this helps.

  Good day!
  Thank you.

• Display the date and time on the taskbar

  I just upgraded to Vista Premium 64 for Windows 7 Professional as well as the date and the time in the taskbar display became static at 07:25 08/01/2010. When I turn the date and time of the show, but I can't find a way to display the correct information on the taskbar.

  Hi geoffinbaja,

  It seems that some application or service is in conflict. To narrow down on the boot of the issue of the computer toboot and check if the issue still persists. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• As of the 31 version, why is there still no option of Thunderbird to insert the date and time in the message that you write?

  As of the 31 version, why is there still no option of Thunderbird to QUICKLY insert the date and time in the message that you write?

  Literally, saw this option very well needed - and opportunity-"promise" for three years now, and even if there are only one or two formats that could be used, at least the option is there.

  It seems that only is to bind a Macro, and the tool to Thunderbird and do it this way.

  Joe Rotello
  [email protected]
  Skype: joerotello

  If the installation of the add-on of TimeStamp is unacceptable for see you if there is a related add-on that you that you already might have managed to convince author to add your function. The Add on more for example has many variables that can enter the body of the message that get automatically replaced with the appropriate data when you merge a message.

• is it possible to display the Date and time in the address bar or a clock window constantly

  I need to take screenshots with date stamps and time using the script of iMacros. Everything by taking screenshots iMacro don't add taskbar windows for the date and time. It takes screenshots of browser. Is it possible to display the Date and time in the address bar or a clock within the tab browser constantly to capture the screenshot with time stamp through iMacros
  I added the big clock background Add-ons, but it is visible to new tabs.

  Badly looking for help and it will be really appreciated...

  Try this extension:

  • https://addons.Mozilla.org/firefox/addon/simple-clocks/
  • https://addons.Mozilla.org/en-us/Firefox/addon/FoxClocks/

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• cannot change the date and time in the system restore

  How can I change the date and time in the system restore? When I try to create a new restore point, I can't change the date and time, the system automatically date and time in.

  System Restore will always set the date and time of any restore point created at the effective date and time of the machine.

  If you want to restore your computer to a date and an hour earlier, you must select restore from a restore point that was created at the earlier time.  This article explains how.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  My apologies if I misunderstood your question.  Why should change you the date and time when a restore point was created?  The only possibility of achieving a fictitious date and time will result in a change as actual date and time Windows or in the Bios, either option with unforeseen consequences.

• date and time in the photo gallery

  the date and time on the Gallery picture is stuck on 01/01/2013

  How can I change this?

  This is the moment where the photo was taken not present.

  It is displayed like that as you change the time from that currently used for the image.

• Form Validation failure: "value is not a date and time in the format"

  Hello world

  I am facing a weird problem in my custom OAF page. I'm displaying the records of a particular table through dynamic VO and dynamic array. All records appear correctly. But when I try to click on NEXT 10 records in a table, I get the error like "FAILED FORM VALIDATION: 1000 ORG CUST BO VERSION is not a date and time in the format. Just like in the screenshot below.

  

  Strange part of the question, if I select the columns to display not related to this day, so I only am not facing problems. If I select only dates to display and also am not facing this problem. If I use the mixture of this type varchar2 and data, I get this error.

  I tried to change the type of data but no use.

  If we close, look at the PARTY_ID error message trying to copy its data to ORG_CUST_BO_VERSION the last column. Why what's happening clue me less. Can anyone guide me on this please?

  The problem is that you use the same name for the creation of the MessageTextInputBean inside the Table.

  The name of MessageTextInputBean make it dynamic.

  ex: -.

  OAMessageTextInputBean oamessage = (OAMessageTextInputBean) createWebBean (pageContext,

  MESSAGE_TEXT_INPUT_BEAN,

  NULL,

  'text' + columnNo);

  See you soon

  AJ

• Update of "last Web site visit Date and time" in the Contact record

  Hello world.  I want to see if I can find a way to write a program that will automatically update the field "last website visit Date and Time" in the contact record Eloqua and if they have a SFDC ID drive, push this stamp to SFDC.  I do not make a rule to update or something that will allow me to transmit the data of visitor correlated in good contact record.  Any suggestions?

  Thanks to Pierre in customer support, we now have a solution for this.  The User Guide for the database management (page 28) has a way of creating a progressive input signal to a program that will update web visitor info cross-object of the contact record.  My program is running and works perfectly!

• set the date and time on the content of oracle webCenter

  Hello
  
  Please tell me how to set the date and time with the location on the interface tab utility properties of the system.
  also tell me how to find the location on the interface tab content properties webCenter system utility
  
  Regards\
  Mayur mitkari

  Hello

  You need start the System/ucm/cs/bin properties applet. Virtue of the present, you see tab location option.

  Thank you
  Srinath

• Issue date and time with the javascript scripts

  Hi all

  I need to maintain a bit of history on my pdf form, so I need to get the date and time when the user submits the form.  Currently, I am able to do this in FormCalc.

  var todayDate = Date()
  var todayTime = Time()
  var today = concat (Num2Date (todayDate, "MMMM DD, YYYY"), "", Num2Time (todayTime, "h: mm A") "");

  today will contain: April 28, 2009 14:23

  I want exactly the features in javascript.  I'm not able to get the same result.

  Please give me some code for the same in javascript snippet

  Deepak.

  Hi Deepak,

  This example should show you how you can recover each "piece" of the date in JavaScript and piece and then that their back together according to your needs.

  You will find several examples of scripts on the date formatting here: http://javascript.internet.com/time-date/

• OfficeJet 6700 Premium printer: Re setting My HP 6700 x Premium

  Emergency assistance is needed please! I managed somehow to me locked out many many functions on my printer that I tried to install on my new HP laptop since Tuesday, January 19, as well as the problem of getting my port number! as I have nowhere to put a disc in my new laptop! even if everything seems to work at the minute, I'm very worried if my printer need Urgent updates my printer stops working! I'd appreciate any help I could be offered please! informaitiom even on a full re my printer together please! some things that are locked on my printer are the date and the time in my country there are about 15 to 20 functions I managed to block me out!

  Thanks for any help you can give too

  Hello

  Thank you for using the forum.

  Please download and install the full software features from this link to win 10 for your printer:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930S6

  You can try to reset your default printer.

  On the front of the printer control panel select Setup > tools > Restore Factory defaults to reset the printer to its default settings.

  We recommend that you uninstall the previous software before you reinstall the downloaded software FULL of features,

  Hope that helps.