OfficeJet 7210: Printer error

Similar Questions

• OFFICEJET 7210: I need drivers for my Officejet 7210, printer all-in-one.

  Hello everyone, maybe someone uses drivers for an Officejet 7210 all-in-one printer?, this printer is deleted and no longer supported by HP, I bought a new laptop and now I need to install drivers...

  Thanks for your hellp...

  Daniel

  On the assumption that the OfficeJet 7210 is a member of the printers OfficeJet 7200 series (I don't know for sure - I don't have much knowledge of ink jet printers):

  My Professional 10 64-bit Windows system has a driver for the OffiiceJet 7200 series printers:

  

  You may need to click the Windows Update button in the Add Printer dialog, then wait (possibly several minutes) while additional drivers are downloaded, until the list is filled again.

  Of course, I have no idea if this driver is not working properly, or if it will offer all the features that you can.

• HP Officejet Pro 8610: hp officejet 8610 printer error "Please stop your printer, and then click.

  When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.

  I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds.  Also this operation and in him plugging in several power strips and directly into the wall outlet.

  I was able to restore the default settings at one time.  This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.

  Hi @mrberad,

  Welcome to the Forums of HP Support!

  I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.

  I take a flashlight and look inside the obstruction.

  Use this guide to check obstructions:

  • Displays a Message 'Transport Jam'

  I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet J4580 printer error message

  I received the following error message: print cartridge problem: [Black]. Refer to device documentation to troubleshoot. I looked online don't see anything that could help.  I also removed and replaced the black cartridge... nothing.

  Hi trends36

  Have you tried cleaning the contacts of the cartridge? See the link below for more details

  http://support.HP.com/us-en/document/c01818839

  Ciara

• OfficeJet 7210 printing preferences does not work with the driver for Windows 8

  I have successfully installed the driver of Windows 8 (64 bit) full of features.  Printer copy, scan, fax and print from the computer.  However, I'm no longer able to print in grayscale, select a print quality (fast draft, project, etc.) and choose the paper type on the printer menu shortcuts in the printing preferences.

  In the box "what do I want?" and choose fast/economical printing, the selections above will appear in the list of options, but when you go to select an option in the drop-down lists that can empty al.

  You probably work with a more basic driver in Windows 8, and this is why you are not able to use these features. I would check to see if there is another driver that will allow you to use the. Here's a message written by a colleague who deals with how you can do this:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/How-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

  Let me know how it goes and I'll get right back with you!

• Need printer driver generic for Officejet 7210 all-in-one on Windows 8.1

  Updated my Windows 8 Windows 8.1, who took my print driver for an all-in-one Officejet 7210.  Tried to reinstall.  Error file not found.  Detailed monitoring of the process of a t-shirt (temp deleted files, deleted startup, programs).  Driver does not work but the printer does with other computers.  Printer is no longer supported and no help (but is in good working condition).

  I'm looking for a generic driver that will work with my printer and Windows 8.1.  I appreciate a lot of help...

  Hi LChristofaro,

  I have studied your error message and the Msiexec.exe error and this is a problem with windows install. I would recommend restarting your windows installer.

  To do this:

  1. run "Services.msc" (without the quotes).

  2. double-click on "Windows Installer" in the Services list.

  3. click on stop, and then click OK.

  4. Click Start, and then click OK.

  You restart the computer and try the installation again.

  Let me know if this helped.

  Thank you

• HP Officejet 5740: The Officejet 5740 printer is sending a document feeder of error message cannot read original documents

  HP Officejet 5740 printer sends an error message indicating that the document feeder could not recover the original document.

  Hi @angelahouser042,.

  Welcome to the Forums of HP Support!

  I see that you have problems in your ADF on your HP Officejet 5740 e-all-in-one printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I recommend that you follow the steps in this guide:

  • "HP ENVY 7640, 5740 Officejet and Officejet 8040 e - all-in - One Printer Series - a Message ' Out of paper ' is displayed on the control panel and the printer doesn't pick up paper

  Please follow: step 3: clean the ADF rollers and separator (optional) buffer.

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• Since the end of the Windows 7 upgrade my HP Officejet J4500 printer will not print. Error Msg said "did not supported operating system"? Do I have to buy a new printer?

  My HP Officejet J4500 printer prints are no longer the documents since the installation of Windows 7?  Msg error starting of installation has the operating system not supported?

  Your problem does not have Windows Update features (compared to the upgrade of Windows).

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP officejet 8600 wireless printing error

  My HP officejet 8600 wireless 1 page prints at once.  Anything larger than a page and I got an error message.  Recently upgraded from WINDOWS 8 to 8.1 - no improvement.  Very frustrating! It would really appreciate advice...

  Hello dabadia,

  I'm sorry to hear that your 8600 Officejet will print a single page at a time after your upgrade to 8.1 Win. I would like to help you and give you my best advice.

  I recommend running HP Print and doctor to analyze first to find and fix common printing problems.

  If this does not resolve the problem, I recommend then Uninstall the printer, restart your computer and reinstall the software using the Printer Wizard install for Windows.

  Good luck, I hope this works for you!

  Kind regards

• HP Officejet Pro 8600-general printer error

  A sign on the printer came up to say that I had to fill two of the printer color cartridges.  I did, and then a message pops up saying that he had a problem with "ink system.  This was followed by a message that says General Printer Error "."

  I was advised to put off the printer, then unplug it, without success.

  I took the ink cartridges and repositioned them and put them back again without success.

  I contacted HP support, put my serial number and was informed that my warranty was expired.

  What do you suggest me?

  Hello Busyasabee,

  Welcome to the Forums of HP Support! I understand after having to change the cartridges on your HP Officejet Pro 8600, you now get a general print error "ink system.  I see that you have completed the troubleshooting steps base without success.

  I have a recommendation which is mine only and not that of HP, because your HP JO 8600 has a removable print head, you can try to rinse the print head. I had other members of the community to use this method and have been able to print correctly after.

  Now, the video, I send, suggest to buy their cleaning kit. This is not necessary, you can use water and SOAP. If you don't feel comfortable withdrawal and rinsing of the print head is ok, but it's the only other suggestion I have that the printer is out of warranty and troubleshooting of all has been done.

  See here:

• HP officejet 4630 could not print error message on screen

  I hope someone can help me,

  Whenever I try to print anything that is more than 1 page in my office or my laptop, the Officejet 4630 printer prints one page and then the part of the second and then I get a message that appears on my monitor saying

  "Printing on HP Officejet series 4630 error the printer couldn't print" and then it gives the name of file or address this point, that I am trying to print.

  I use windows 8 on top of the tower and XP on the desktop

  Thank you for your help in advance.

  ~ O ~

  Hello attaboye,

  Welcome to the HP Forums

  Seeing that you are using a Windows operating system on both computers, please run the HP print and Scan Doctor on each system. If the doctor fails, please let me know where she didn't have and error codes, it can generate.

  I look forward to hear from you.

  Thank you.

• Logo on Quickbooks & PayPal does not print OfficeJet 7210 All in One

  Spin Windows 8 (64-bit). My logo on invoices from Quickbooks & delivery notes and mine and logos of PayPal on the PayPal online forms do not appear on the output of my HP OfficeJet 7210 All In One, BUT they do when printed on other printers I've tested using the same documents. I downloaded what I believe to be the printer driver on the HP support site, but the problem persists. Need some suggestions, please.

  Hello joefredt.

  Thanks for the information. I want you to add a printer Deskjet 990c. Please open "devices and printers". Once that opens click on add a printer in the dialog box. Now click on "add a local printer. When it says "use an existing port", the drop-down box and search for the USB0001. Select it and click "next".  Please click the button of "Windows Update". This may take a few minutes to complete. Just wait for the "MFG" and "Printers" list to fill again. When they come back to the top, scroll down to "HP" (no), and then search for printer "HP Deskjet 990c" on the right side. Please select this option and click Next. After that simply select the Finish button. Once the printer is installed you can your print jobs that you have problems with the printer. I hope this helps.

• Printing error 0 x 00000709 when I try to make my new HP Officejet e-all-in-one printer default

  Print 0 printer error x 00000709 when I try to make my new HP Officejet e-all-in-one printer default.  I removed the old printer, uninstalled it, theinstalled HP Officejet (former was an HP Photosmart all-in-one).  I rebooted, everything I can think of.  I spent hours (overnight) through countless services for troubleshooting.  Can someone help me please?  Need of college courses

  . From Internet Explorer

  Original title: error printer print 0 x 00000709

  Hi PattiVan,

  It seems that you can not set HP Officejet 4620 as default printer, you get the error message: 0 x 00000709.
  
  What is a local printer or network printer?
   
  We will try the following methods and check if they helps us to solve the problem.

  Method 1: Try to change the default printer value in the registry key and check if it helps.
  

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  (a) click Start.

  (b) type regedit in start search and press enter.
  (c) access the site mentioned below.

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
  (d) in the right column, you will find key device, change the value of your printer name.
  (e) it is for example in the format: "HP LaserJet 4250 PCL6, winspool, Ne03:

  (f) right click on the value and click Rename, replace with the name of your printer.
  
  Method 2: Try the steps from the link.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3: Let's connect on another user account and check if you can configure the printer as the default printer.

  If it works in a different user account, then the user account is damaged.

  
  

  Refer to this link and create a new user account, copy files to the new user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• HP Officejet 4630 series: printing error

  Hello

  My printer was fine until 'Windows10 update 1607' has been downloaded on my desk a few days ago. Now every time I try to print anything for my computer. Status reports "error-printing".  I ran the trouble shooter print a test page, I printed a report of diagnosis of HP print and Scan doctor. Everything seems fine, but it always brings a printing error. So now I'm re-printing a document, it now says "printing" on the device, but it feels very, very slow, 10 minutes and it's still printing the first page. What can I do to fix this?

  Your help in this matter is much appreciated!

  Welcome to the community @BeeAnn HP

  I saw your post on the slow printing problem and wanted to do some of my own suggestions.

  You can try the following:

  1 reset the printer, then restart the computer. Make sure that the printer is connected directly to a wall outlet.

  Turn on the printer.

  With the printer, unplug the power cord at the back of the unit.

  Unplug the power cord from the wall outlet.

  Wait at least 15 seconds.

  Plug the power cord into the wall outlet.

  Reconnect the power cord to the back of the unit.

  If the printer does not by itself, press the Power button to turn it on.

  2 run printing scanning and Dr.

  3 try to make copies to see if they are too slow. If they are, then it's showing us that there is a problem with the hardware with the printer.

  4. Uninstall and reinstall the printer driver and software.

  Let me know how make you out!

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• 7612 large format HP Officejet: 932 xl cartridge printer error causes

  The printer prints ok with cartridge installation and replacement, but whenever a 932XL cartridge is inserted a printer error message

  Printer failure there is a problem with the printer or ink system 0x610000f6 error code

  Welcome @Big-Max,

  Thanks to their participation in Forums of HP! By your post, I see that you are getting the error "failure of printer there is a problem with the printer or ink system 0x610000f6 error code" when you install the 932XL cartridge. I will definitely do my best to help you.

  I would try the steps listed in this document, they should help to solve this problem: display of the 'Ink system failure' error.

  You use genuine HP cartridges?

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!