OfficeJet 7410xi: computer does not have USB printer after upgrade to window 10

Similar Questions

• Computer does not have a password after waking up from his sleep.

  To start, I have a laptop Windows 8. I have my laptop set whenever I close the lid, it is supposed to go to mode "Eve" and require a password when I lift up. It does not require a password when I lift the lid and I know for a fact that I have a password set for the characters, fingerprints and photograph, and none of them appear. Simply open up like nothing ever happened. Maybe it's because he's going to do nothing when I close the lid, even if I put it in sleep mode. I don't know if I have accidentally deleted a file or changed a setting, or if I have a virus, but it continues to be.

  It's okay, I discovered that it was a virus or something, but now it is deleted.

• Computer does not recognize USB devices after startup XP

  Computer was working fine.  Moved (by car) to another office.  At present, the keyboard will work until the time starts windows XP (SP3); It can control the it function and has a light illuminated NUMLOCK.  As XP starts, the Numlock light turns off and the keyboard is no longer functional.  It is obvious that the keyboard works, and the USB seems to be OK because he has worked with several installed keyboards until XP load upward.

  Any suggestions are appreciated!

  What type of laptop do you have? In the BIOS make you emulation USB is lit and also make sure that in XP right click on my computer got in the hardware Manager then drive and make sure that there is no '? ' marks in the screen of your driver. Otherwise, this looks like a motherboard might be on the fritz...

• I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up ever since I downlo

  I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up, since I downloaded the new version of Firefox. I want just the old version of this back because I can't download the Adobe stuff which is necessary to protect my computer against hackers apparently not. It would have been nice to know he had a problem with the new update of Firefox BEFORE I downloaded it. I have Vista, which is usually a problem with Adobe and Firefox. I don't seem to be able to run a lot of Adobe at all on my computer because of the Vista.

  This has happened

  Each time Firefox opened

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

• My computer does not accept the print command.

  My computer does not accept the print command.  He always questions me to save a file, I don't want to save a file.  How can I change this?

  Sherimcfalls,

  1. what operating system is installed on the computer?
  2. the problem occurs with any particular application?

  Method 1
  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2
  Try to set the default printer.

  Change your default printer
  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

• This computer does not have an enough space to the temperory files: error Code 0 x 80004005: upgrade of Vista

  Hello

  I am trying to upgrade to Vista home premium, Vista ultimate, but get the error continues on the execution of the installation program. Here is the error msg:

  This computer does not have a sufficient space for temporary files. Windows installation needs at least 445 MB of space on any partition for temporary files

  Error code: 0 x 800004005

  I want to just point out that I have 4 partition and each partition have at least 5 GB of free space on the disk with one of them having 35 GB of free space.

  Would be grateful if someone can help me solve this problem

  Concerning

  Vik

  Hello Vik.in,

  If you upgrade your Windows Vista,

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click on system and security.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click on disk management under storage.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action

     Note At this point, the existing Windows installation will not be able to start until the remaining steps are complete.

  9. Close computer management.
  10. Insert the Windows Vista DVD.
  11. Restart the computer.
  12. Use the Windows Vista DVD to start the computer.
  13. Choose the desired language and keyboard settings and then click Next.
  14. Click repair your computer at the bottom left of the screen.
  15. When you are prompted to repar startup data, click repair and restart.
  16. After the computer restarts, repeat steps 12 through 14.
  17. If your computer has only one installation of Windows, click Next. Otherwise, choose the correct installation of WIndows, and then click Next.
  18. Click on the link of the Startup Repair tool .
  19. Click Finish once the repair is complete. The computer should reboot to Windows Vista.
  20. Start the upgrade using the Windows Vista DVD

  Here is a link to the article that talks about it:

  http://support.Microsoft.com/kb/928232

  Hope it would work, answer back if it does not work.

  See you soon
  Syed Irfan

• My computer does not have a cd or dvd

  Original title: Hi... I have a problem...

  My computer does not have a dvd or cd. In devrice Manager I what are the drivers of CD - DVD is missing completely.  MY COMPUTER does not display the icon of CD - DVD... Please help me!... I think that my dvd drive is well connected and I think also it is not broken because it is a normal sound when I put a DVD or CD... What should I do? I use windows 7

  Please don't send me help as REGEDIT because I tried and did not have hepled!

  Simply because the drive makes noise doesn't mean it works. Re-check all connections, the data and power, and failure to address the question the reader may need to be replaced.

• my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

  Hello

  You tell us what type of license you have.

  If the former was preinstalled, NO, you cannot transfer it.

  Read this information:

  If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  The above applies also to OEM system builders licenses.

  License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ___________________________________________________

  And please read this, you can:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

  See you soon.

• I purchased Adobe Lightroom 5 who arrived on a disc.  My new computer does not have a D drive (for dvd or cd).  I'll be able to download my Lightroom 5 on my new system via an online connection?

  I purchased Adobe Lightroom 5 who arrived on a disc.  My new computer does not have a D drive (for dvd or cd).  I'll be able to download my Lightroom 5 on my new system via an online connection?

  Sure.

  Download it from

  Adobe - Lightroom: For Windows: Adobe Photoshop Lightroom 5.7.1

  Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 5.7.1

  Install and enter your serial number.

• I recently purchased Photoshop elements 13.  My employer just changed my computer (I am allowed and only use my personal computer) and the new computer does not have a CD-ROM drive.  Is it possible to download the software elements on my compu

  I recently purchased Photoshop elements 13.  My employer just changed my computer (I am allowed and only use my personal computer) and the new computer does not have a CD-ROM drive.  Is there a way to download the software items on my computer with the serial number and not the CD? Help!

  You can download the trial and use your serial number of the drive to enable to make full use...

  PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.

• I have a CD of reinstallation of Microsoft; but does not have my product key to activate Windows.

  Series of Microsoft Windows XP Home Edition 2002 SP3

  I lost power when a transformer blew on my street. I'm short Windows XP Home Edition Series 2002 Microsoft. I DO NOT have the original version that has been installed on my computer when I bought the PC.
  However, I have a CD of reinstallation of Microsoft; but does not have my product key to activate Windows.
  Here is the information I have:

  PLEASE TELL ME WHAT TO DO!
  Thank you
  Tony
  E-mail address is removed from the privacy *.

  I can provide as much information it takes to get active Windows.

  Windows version: Microsoft Windows XP Home Edition Series 2002 Service Pack 2 installed
  System has been upgraded to Service Pack 3

  Name of the system:	D845EPI_
  Processor name:	Intel (r) Celeron (r) CPU 2 .80GHz
  The name of the BIOS:	BIOS Date: 26/09/03 15:01:32 worm: 08.00.08
  Adapter name:	NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
  Installed memory:	2.00 GB
  Default printer:	Dell AIO Printer A92

  Internet browser: Mozilla FireFox 9.0.1 (x 86 en - us)
  2012 software-AVG current anti-virus & AVG PC Tune Up 2011
  I have Microsoft XP Home Edition with only SP3 Bootable CD
  I have a backup disk with my current data
  ________________________________________________________
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  Name of system DELL-7089676EEE
  The system - INTEL_ manufacturer
  System model D845EPI_
  System Type X 86-based PC
  Processor x 86 family 15 model 2 Stepping 9 GenuineIntel ~ 2799 Mhz
  BIOS Version/Date Intel Corp., VA84510A.86A.0023.P08.0309261501, 26/09/2003
  SMBIOS Version 2.3
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  DELL-7089676EEE\DELL user name
  Time zone Eastern Standard Time
  Total physical memory 048,00 MB 2
  1.43 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 3.85 GB
  Paging file C:\pagefile.sys
  ______________________________________________________________
  Name NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
  PCI\VEN_10DE & DEV_0110 & SUBSYS_00000000 & REV_B2\4 PNP device ID & 9BAF86 & 0 & 0008
  Adapter Type GeForce2 MX/MX 400, NVIDIA compatible
  Adapter Description NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
  Adapter RAM 64.00 MB (67,108,864 bytes)
  Installed Drivers nv4_disp.dll
  6.14.10.5673 driver version
  File INF nv4_disp.inf (section lvl4)
  Color plans 1
  4294967296 colors Table entries
  Resolution 1024 x 768 x 60 hertz
  32 bits/Pixel
  0xFD000000-0xFDFFFFFF memory address
  0xE8000000-0xEFFFFFFF memory address
  IRQ channel, IRQ 16
  Port of e/s-0x000003B0-0x000003BB
  Port of e/s-0x000003C0-0x000003DF
  Address 0xA0000-0xBFFFF

  
  Pilot c:\windows\system32\drivers\nv4_mini.sys (6.14.10.5673, 1.81 MB (1 897 408 bytes), 30/11/2011-11:11)

  Please change your key of product before it is stolen! -also delete your personal information

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• Cannot print after upgrading to Windows 10

  Pleae help, I can't do my printer print after upgrade from Windows 7 to WIndows 10.  I have a HP officejet Pro 8600.  I downloaded a new drivers, etc, and nothing works.  Help, please

  Hello Kathy,

  http://support.HP.com/in-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series-N911/4322914/model/4323658

  The link will help you to download the latest drivers. Make sure that your operating system indicates Microsoft Windows, Microsoft Windows 10. If it shows any other OS, please click the Edit link to the right and select Windows 10 in the menu drop-down, and then click Update. After that Windows 10 if poster as your operating system, you can click on the download to start button to download the latest drivers. I hope this helps!

  Although I am an employee of HP, I speak for myself and not for HP. * say thank you by clicking on the "Bravo!" Star"located on the left * make it easier for others to find solutions, marking my answer to"Accept as Solution"if it solves your problem.

• the computer does not recognize the printer memory card reader. HP photosmart 7660 printer

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  Microsoft did not your hardware - done HP.

  All support for it - regardless of your operating system - is the manufacturer of the equipment.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=305364&LC=en&cc=us&DLC=en&lang=en&cc=us