OfficeJet 7612 large format: officejet 7612 windows 8
We recently purchased one of these * monstrosities for our home and it works fine, as long as we do not attempt to print several pages at a time.
We organize two identical Windows 8 workstations, connected to the printer via wifi on our network router. We were able to print without problems with the PC, colors and shades of gray, but when attempting to use double-sided printing (I think we should have it with the greatest accessory supplied with the device, but I'm not complaining, we are able to do it manually) or print several pages at a time, we receive the error "send to printer" on the printer dialog box and it causes printing to cancel even though it seemed that it was printing very well.
I and my partner are not too upset with that, but it's frustrating to have to constantly print one page at a time and put it in the printer so that it will print two-sided for us.
(* Used with love)
To eliminate any hardware problem, try placing several blank pages on the top of the charger page, select copy and set the duplex option, and then try to copy in duplex mode and check the results.
If the copy is successful, try to install the patch which may be applicable:
Try it and tell me if that helps get the problem resolved.
If the copy fails thus clarify please.
Tags: HP Printers
I changed my ink to a printer large format HP7612, and now it seems that one jumped back when the truck went all the way to the right and now is stuck. How can I fix?
@DocCottle will be out until next week, but I thought that I will answer to save you time waiting for an answer.
Here is the document of support for this printer is not turned on - printer does not turn on.
If the 'Transport Jam' document provided by @DocCottle did not help and your printer is still under warranty I would contact HP Technical Support. What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
Step 4. Scroll down and click on: contact HP options - click Get phone number
File number and phone number are displayed.
If the printer is out of warranty, you may be able to get transportation released with a small "MacGyvering", if there is no guarantee to worry about urination.
When you do anything inside the printer that you want to unplug the printer for safety, but you want the trolley in the unlocked position, then turn on the printer and open the cover of the transport area before unplugging the printer.
I realize that with the trolley completely to the right is not easy to see what you're working with, but if you have something flat and long, like a ruler, perhaps there is a way to slide in on the top of the cartridge enough to push toward the bottom of the cartridge that has popped up and pull the hand trolley.
I hope that you are able to get it out.
If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.
I have recently upgraded to Windows 10 and a book of Surface and now when I print on my printer large format of HP7110 send all is off center to the left. I am not able to use my settings customized for a 12 x 18 prints.
The scan doctor and toubleshooting "of problems after installing WIndows 10" article were completely worthless to determine the issue. I ended up installing one of the pilots to plot to override the default settings for the printer. Pretty amazing that a printer large format will allow only certain papersizes to use when using a PC (using a Mac, you can set all the desired dimensions). HP should probably find a friendly driver for PC that does the same thing. In the meantime people must install one of the drivers of your parcel. I used the T520 pilot.
The scanner interrupts the connection of WIFI halfway the scan. I can scan sometimes two or three pages, and then the next page will scan only partial and the connection is abandoned - typically freezes application (VueScan), while the scanner window indicates that the analysis is ongoing. If I wait until the scanner end I get only part of the page, with the background that half left in white. That is what it is? Is the problem with VueScan, Mac OSX 10.10.1, OfficeJet 7500 or my WIFI network?
My system: Mac OSX 10.10.1
VueScan 9 x 32 (9.4.59)
iMac 2.8 GHz Intel Core Duo (24 "beginning 2008)
6 GB Memmory 800 MHz, DDR2 SDRAM
HP 7500 has large Format Printer/Scanner (model E910a)
WIFI modem: Cisco 3825 DPC
(Shaw CableVision/WIFI modem)
What happens when you scan from the HP or Capture of Image scanning software, you see similar problems?
In the affirmative, please let me know because it wil require to solve any problem of connectivity to the printer.
If everything works with software such as HP can happen due to any problem with VueScan, such I would say contacting VueScan at torubleshoot because they are more familiar with their product.
Please let me know the results,
I have a Mac Book Pro running Mac OS X 10.7.5 (just updated all the software).
I connect my MacBook to the internet through my Apple Time Capsule (wired connection). I use version 6.1 (610-31) Airport utility and I just updated the version of the firmware to 7.6.1
I use a local wireless through my Time Capsule.
I just bought a large format HP Officejet 7500 a (model name: C9309A).
The printer has been set up to detect my wireless LAN and initially he worked for printing and scanning, but it has recently discontinued. I tried to uninstall (purification) the software of my laptop HP, all my software update and reinstall the HP software on my laptop, but it still does not work.
The printer is connected to my time capsule via an ethernet cable and a USB cable. It also includes Wi - Fi connection generates my time capsule. I have preferthe printer plugged into the router (time capsule) rather than a WiFi connection I print large files.
I can install the printer on my computer mac laptop (settings/printers & scanners). I added it as a wireless and a wired connection through my time capsule (it shows that the connection is done by the time capsule). However when I print, there is a long delay, the printer now says "printing", but I get the error on my laptop screen "can not write print data: ÿ * xˇ.» A few minutes later a blank page or a page with a single line is ejected from the printer.
If I go into the configuration of the HP printer, it says I'm under pilot 3.4.1. If I try to open the printer utility I get a message "utility HP does not work with the devices connected to the airport. Try to connect the camera directly to your Mac to work with her. " I tried to connect directly to my Mac via the USB cable and which does not work either. I prefer that the printer is not connected directly to my laptop I have few USB ports.
In my view, this printer is supposed to be compatible with my system.
Is there something more, that I can do or this printer is not compatible with my MacBook Pro or my Time Capsule?
Turn it on wireless and then try to access the EWS - embedded Web server by typing the IP address of printers in the browser's address bar Safari. I would like to know if you are able to access the built-in Web server?
Document below will also help you get the printer installed on your wireless computer.
My all-in-one large format Officejet 7500 a has a broken belt print head. There are also problems scanning that I decided to replace rather than repair it. I live in a small town where there is no recycling options. I'm looking for a way to get rid of the all-in-one former official. Make a donation to repair/rehabilitation, a free recycling center, etc..
Had to do a little research but found this.
This is not a program I know nothing other than what I read on the page. Looks like it is for the United States.
You are in the market for a new printer? Do you need a large Format printer, but do not need all the bells and whistles, an all-in-One? Then, HP has the solution for you!
HP released x HP Officejet 7110 large Format (H812a). The printer offers many features and I'll try to expose information about the device below.
HP: " " Expand your printing with an HP affordable, reliable printer that produces professional-quality marketing materials in sizes from 3 x 5 to 13 x 19 inches. Count on the convenience to save time with easy network and wireless printing. »
The printer currently priced at $ 199.99 and is a great printer Format of single function (print only). The printer is also capable of web services such as ePrint and Apple AirPrint. You can find the printer on the HP Shopping site, located here.
Print speed: up to 15 ppm in black, upwards to 8 ppm in colour (ISO speed).
Up to 33 ppm in black, up to 29 ppm color (maximum printing speed)
HP ePrint ability: Yes
Connectivity: 1 USB 2.0 port, 1 Ethernet, 1 wireless 802.11b/g/n
Paper handling: input tray 250 sheets, output of 75 sheets tray
Print language: HP PCL 3 enhanced, HP PCL 3 GUI
Borderless printing: Yes (up to 13 x 19 in, 330 x 483 mm)
HP 932 black Officejet ink cartridge (~ 400 pages)
HP 933 Cyan Officejet ink cartridge (~ 330 pages)
HP 933 Magenta Officejet ink cartridge (~ 330 pages)
Yellow HP 933 Officejet ink cartridge (~ 330 pages)
HP 932XL black Officejet ink cartridge (~ 1000 pages)
Ink cartridge Magenta Officejet HP 933XL (~ 825 pages)
Yellow ink cartridge HP 933XL Officejet (~ 825 pages)
Ink cartridge Cyan Officejet HP 933XL (~ 825 pages)
* Automatic double-sided printing capability not included; Please purchase separately. The duplexer currently priced at $ 49.99 and can be ordered by clicking here. The part number for double-sided (duplexer) printing accessory is C7G18A. With this duplex module, we have the ability to print two-sided even the superb or paper size 13 x 19 inches.
* The printer has the ability to communicate via PCL3, which means that the device is able to use the HP Deskjet 9800 and HP Deskjet 6980 drivers as replacement drivers. The printer comes with many features of its pilot, but you can use either of these 2 drivers others to perform additional tasks. We can print posters using the Deskjet 6980 driver, for example, or paper formats customized ranging from 3 x 5 to 13 x 19 inches by using a different printer driver.
Hope this happens to those looking for new large Format printers.
It shows a general error on the screen # 0x610000f6. And that's all that. How can I resolve this error and make some impression
Usually the 0 x 6 * errors point to a carriage jam. Please use the following document to solve the problem; ' A 'carriage Jam' or ' 0X610000F6 "message for HP Officejet 7500 (E910a and E910c) a large Format e-all-in-one printers.
If the problem persists, I suggest that we call. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide. Even if the printer is out of warranty, I recommend calling that we might be able to offer a discount on a newer model.
I hope this helps.
I just buy and install a large Format HP Officejet from the 7610 and I tried several times to print a sketch of A3 from photoshop. In the preview, all right, I checked the size of A3 paper and all, but printing is a cropped image of the original in the middle of an A3 paper A4.
I use Photoshop CS6 on a Mac with os x 10.7.5 operating system and I'm really confused.
That I am I wrong to do so since the preview is ok?
What else could I do to print in A3 size?
Hi, in response to my post, I installed the software directly from the disc that came with the printer without the help of the online resource. Previously, I had simply related that he and it worked for A4. He now works as well as many other features that had not been installed.
I have a printer of e-all-in-one large Format HP Officejet 7500 a - product E910a No.: C9309A serial no: [personal information deleted]
I need to replace the print head.
I found this on HP page http://support.hp.com/us-en/document/c02271166 they said it use the CN643A
On a support HP cat, what they said use CN642A.
On another page of HP, they said use CH638A.
The CN642A is now 5 HP564 ink cartridges, but still the HP web page said that it will work in my HP Officejet 7500 a large format using the HP920 cartridge.
I found other heads of printing on the web article CD868-30001 model number and on the web page of HP were unable to match the part number for a list of available models.
Now my big question including the number of pieces to the correct print to my printer head?
I offer my apologies. It should have been if your printer uses 4 ink cartridges, type CN643A
Please click HERE to access the document to see what print head fits into your printer.
Check under Solution 4: replace the print head.
HP Officejet 7500 a large Format
Mac OS x Lion
MacBook Pro 13 "
Printing files PDF and various programs.
- Printer prints random colors instead of Grayscale / black.
- Using a lot of color ink and not a lot of black.
- Have run head clean process repeatedly, problem fixes for a few prints then the problem comes back to halfway through a new course.
- Try to use grayscale / black for the most part.
This happened to me... Printed from a PDF document was gray and pink text and vector images. So, I need to print in color, not gray. less advanced in the print dialog box, I selected preserve primary CMYK and gray gray as K - only treat and preserve black. All three must be selected.
I hope this helps!
My HP Officejet 7000 (printer large format) is no longer print tabloid or more, I do not see even an option super b3 (13 x 19) on my list drop-down media printing in Illustrator format. When I try to print tabloid, it indicates the paper size is incompatible when it is not and sends a blank sheet of paper through. It prints well 8.5 x 11 but nothing more. Any ideas?
I deleted and added the printer to my list and it fixed the problem.
Why can't I not select paper large format on my officejet 7500 was using the House eprint & biz app?
Oh! This app is for use with printers-quality large format designjet commercial. This application does not support the 7500 a wide format, because this printer is a printer of quality of household use.
For more information about this application, see the link http://h10088.www1.hp.com/cda/gap/display/main/index.jsp?zn=gap&cp=20000-22929-23183-29704%5E371189_4041_100__&jumpid=re_R10931_go/eprintandshare"> here.»
Unfortunately, this print feature large format for the 7500 a thanks to ePrint is not available.
This is a printer large format that Windows XP handled paper sizes up to 13 "x 19". Now on Windows 10 these big papers are not displayed and cannot be used.
Have you installed the drivers HP full software functionality or may you used Microsoft Built In drivers? (a class driver).
What is the exact name of your printer is listed as?
I created a document editor of 13 "x 19". 13 x 19 ". I am trying to print and paper size continues to go to 4 x 6. I went into the settings of the printer and entered the two fron the tab general and on the Advanced tab in the 'printing preferences'. I set the size of paper 13 x 19, which is a standard size of large format. No matter what I do, I will go back to the Publisher and the printer is trying to make the paper 4 x 6.
I thought that I would like to beat the system by recording format TIFF and printing from photoshop or lame windows Printing Wizard photo, IT FACT WITHOUT DIFFERENCE, THE PAPER SIZE WILL NOT LET ME print 13 x 19 PAGES! I'm at my wits end. I downloaded the latest drivers, but don't really expect, this change anything since I "ve could print this page size in the past, using this driver. Does anyone else have this problem and it was resolved? Thanks in advance for your help.
BTW, I'm printing to a system with Windows 7 Ultimate 64 bit. I don't know if it's a question of Windows 7, a 64-bit Office, but it is certainly a driver HP problem. I tried to print using MS Publisher 2010, Windows photo gallery and Adobe Acrobat X and Photoshop 64 bit CS5.5 photography.
I found the answer in another post that did not come with my initial search. In case anyone else needs to know, just go to your printer properties, Advanced tab, click the print processor, then select the WinPrint processor.
Click OK and apply/OK and you should be OK to print on paper large format again. I had to restart my spooler service, but only because I had a bunch of items in my queue that wouldn't not delete
Are there any support/printer drivers HP for the OfficeJet for Windows Enterprise 10 6700?
Windows 10 is still in its beta phase, any pilot will not be provided before the release of the operating system.
From my experience, Windows 8.1 drivers should work fine, I suggest to give it a try:
Maybe you are looking for
Hello, I got a MacBook Air with Yosemite, I would like to know if theres a command so I can close or refuse all conections hollow port 5900. After that it is there another command to re open or allow all connections (in case something goes wrong)? Th
I'm unable to access my Yahoo mail and get the following message: "Cycle prohibited".Description: Could not process your request for the document, because that would create a cycle of HTTP proxy. Please check the URL and your browser proxy settings.
Hello I am trying to install Linux on a Toshiba Tecra 8000. The problem is with a chipset Realtek ethernet PCMCIA card (module: 8139too), which is recognized, but the network is unusable. I always get an error of SIOCSFFLAGS and assigned interruption
Hi all I have a VI under load certain values of a file and fills a table hint that is passed to the appellant VI. Time that the VI sub runs, the table (in and out) back to its default values from the void finishing execution VI (and the output of th
01/06/11 / USA! Greetings 2 all the: > Long time XP Pro & IE - 8 user (for upgrades only). First time on this Forum Carpenter. > Code = KB955706 appears always to update alerts in my sys / bin. > If any other updates, I d - l ones. But this SP3 pack