OfficeJet 8500 has Premium: cannot access any embedded web server...

Similar Questions

• OfficeJet 8500 has Premium how fax or copy a paper double-sided

  Where can I find how you copy or fax a paper double-sided?

  OfficeJet 8500 has Premium

  Thank you

  Keith

  

  Finally figured it out myself

  Thank you very much

• Firefox starts, but cannot access any website.same issue is experienced with Chrome, not Explorer

  Hello, I have a problem with surfing with Firefox. The browser starts but cannot access any Web site. The same question is experienced with Google Chrome. However, Internet Explorer works smoothly. Thank you

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• The analyses are not in line. OfficeJet 8500 has more

  My OfficeJet 8500 has more analysis not evenly.  The upper left area is darker than the rest of the document.  A way to fix this?

  If you have performed all troubleshooting, including the cleaning of the surface of glass scanner, then I would say you are right in your assessment of the defect.  How long have you had the replacement product?

  However, I have one last thing, I would like for you to try.  I have the steps for to do you a factory reset on the printer.  I'll send them to you via private message.  Please check your Inbox for messages in the forum.  Before you perform these steps, please read Bob_Headrick wire on the printer reset, found here.

  If the product is still under warranty, then I suggest call HP for Technical Support on this device.  If you are in the USA / Canada, then the number to dial is 1-800-474-6836.  If you are not in this area, please click here to access the global contact list for HP Technical Support.

   

• erase memory on HP officejet 8500 has more

  I intend to give my HP officejet 8500 has more and I was wondering about the erasure of memory.  The specs say it has 128 MB of memory and I wonder if something might be stored in which could be sensitive information against things that I copied or printed.  How this memory can be erased?  I've not found anything by Google it

  Hello

  Please try the following - sorry, it's not English:

  http://www.YouTube.com/watch?v=dfnET-jRXGo

  In short: If you look carefully at the screen of the printer, you can see the 'RETURN' key, although it was not lit. Press 4 times. This should open menu supported...

  Kind regards.

• Windows 8 scanning on officejet 8500 has more

  After the upgrade to Windows 7 to 8, I am unable to scan using my OfficeJet 8500 has more.  Downloaded the latest troubleshooting and printer seems to be installed, and is the default.  I am able to print, but when I go to print Center and select the option analysis, I get an error message that the printer is not installed.  Same thing happens if I try to trigger a sccan of Acrobat 9 pro.  When I I select the printer from the drop-down list at the bottom (only one), I get an error that there is a network error.  Monitoring of the parameters of the firewall enabled (by default the firewall windows at this point) does not measures on site, in case of problems.  Tried to remove and reinstall the printer, but also the re-launch of the connection Wireless to the printer, No go.

  Am able to print wireless without problem, it's just scanning it is a problem.

  Hello TainoTechy,

  You will need to uninstall the instances of the Officejet pro 8500 Control Panel

  just start typing Control Panel , which is expected to open the Control Panel window.

  Click uninstall a program , which is under "programs".
  Locate for HP Officejet Pro 8500 has "entries and Uninstall the."
  After all programs associated with HP Officejet Pro 8500 has "are uninstall, you can restart the PC."
  Download and install the software for the same thing using the link below...

  OfficeJet 8500 software to win 8

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• How change the font size on a hp officejet 8500 has more

  I have a hp officejet 8500 has more.  How can I change the size of the font to print full page.  The numbers of police is very low.

  Thank you for your help.

  Kathy {personal info deleted}

  Hey Kathy,.

  I see that you have a problem with the text in small font on printed documents.  You say that this only happens when the navigation and printing from the internet.  What browser do you use?  (Internet Explorer, Chrome, Firefox, etc.)

  Have you tried using another browser?  Normally this problem is the result of a problem of compatibility between the printer driver and the browser program.

  So, you can try using a different printer driver, such as the 990 c driver.  The other pilot should be able to go beyond the question of compatibility and printing back to normal when on the internet.  For more information on how to exchange for a different driver click here.

  Hope this helps,

  Jason

• New user cannot access any area of activity

  Hi, I use Discoverer Desktop 9.0.4.43.17 and administrator of 9.0.4.43.18 and I have a new user cannot access any sector of activity, I tried to create a new business district to test and access the Security window on the Client of Directors for this user and my user (works very well!), for my user that this new BA shows normally on the desktop but for new user the selection of business on Assistant workbook area shows nothing. It's something to measure new users to access the space business?
  
  Published by: user2997975 on 06/04/2009 07:19

  Hello
  As suggested by Rod it sounds as if you may have several EUL in the same prod73. Try to connect again, but this time go to tools | Options and click the EUL. It is the last tab on the right side and you may need to click the button to the right (next to connection) several times before seeing the EUL tab.

  Under the EUL tab, make sure that the EUL you want to connect is selected. If it is bad you will need to change it, click on the OK button and then reconnect to the database using file | Connect to the database.

  This time you must point to the right EUL.

  Best wishes
  Michael

• PDF has not been configured for this web server-2008 Server

  Hello
  
  Try to open a report in preview PDF in the workspace and get the error "" PDF has not been configured for this web server ".
  I use a 32-bit server and hyperion 2008 11.1.1.4...
  I already installed Ghostscript 8.51 in my server...
  
  Thank you

  Yes, I got the solutions... .i need to run the HRprinters.exe then I restart EN and pool services

• Photo folder "Windows explorer has encountered a problem and needs to restart" and I cannot access any of my photos.

  Windows Vista and, recently, I scanned a few photos and now my pictures folder won't open and gives me an error "Windows explorer has encountered a problem and needs to restart" and I can't access any of my photos.

  Hi LuiMTX,
  

  This problem is only limited to the pictures folder?

  Method 1: Let flow the fixit available in the link below and then check

  Windows Photo and slideshow problems
  http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag/en-us?EntryPoint=lightbox

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the File System Check
  ER tool to troubleshoot system missing or corrupt files on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• OfficeJet Pro 8500 has MAC OS10.7 any computer not detected in scan only mode

  From 23/10/2013, my HP Officejet Pro 8500 has in scan mode indicates "No computer detected" but print wireless without difficulty. I use a Mac Mini with OS10.7. The scan worked fine a few weeks ago. I suspect that the recent updates to Mac or HP caused this problem. All solutions?

  Hi barneyw,

  I want to help you with your problem of scanning. Follow the steps described in this document for a "no computer detected" Error Message is displayed during the scan.

  Let me know if this helped and feel free to contact me if you need further assistance.

  Thank you

• Pavilion p7 - 1266 s: Officejet 8500 has not been recognized by the HP Pavilion desktop computer

  I have a desktop HP Pavilion p7 - 1266 s and a Toshiba laptop. The two are connected, wireless, a HP Officejet Pro 8500. Both are running Windows7, 64-bit.

  Until yesterday, I was able to print on both computers with no problems. Today, I can only print to the Toshiba laptop. When I go to devices and printers on the desktop screen, the Officejet is gray and I cannot print. This happened once before, about a year or two ago, and I don't remember how the issue has been resolved. Any advice will be appreciated. Thank you.

  Hi @JimCon,

  I understand that you are able to print your Toshiba, but not from your HP Pavilion computer. I see that you have your 8500 wireless configuration and that when you look into the device and printers, the printer appears greyed out. I suspect deleting and re-add the printer will solve the problem, but it may be better to run printing HP and doctor Scan because it is a free utility (tool) that helps you to quickly solve or identify common printing, scanning and connectivity problems including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find the key and the box are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

• If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

Thanks, I look forward to hearing back on your part.

• Panel blinking lights OfficeJet 8500 has

  My OfficeJet 8500 Panel has all lights flashing and a message saying please turn printer and then turn it on again.

  When I do this, he comes back to the top, displays a brief message saying Code 0060 and then comes back to the message above.  Same thing happens after leaving that he unplugged for several hours.  Suspect I need to reinstall the firmware, but cannot find a way to do it when the Panel lights are flashing...  Thanks for any help

  Yes, with electronic, sometimes it's cheaper and better buy new rather than repair it. Sorry, we couldn't get your current operational computer.

  Good luck with what road you take!

• OfficeJet 8500 has 910: Macbook Pro won't find my Officejet Pro 8500 printer

  Until recently, my Officejet 8500 910 has worked very well with my Macbook Pro, desktop computer wireless Mac and iPad.  Now, it will not be printed with any of these devices. Yesterday, he worked with my iPad, but today it says that it cannot find the printer. On my Macbook and desktop computer, it is impossible to find the printer when I try to add.  You can find the scanner and fax part of my all-in-one, but not the printer. I deleted all my printers and tried to add this back.  I've stopped and restarted. I checked that my printer is connected.

  I have same thing happened with a HP wireless printer in the 8600 series to work.  Sometimes he would find and connect.  Other times, it wouldn't. I appreciate all help.  Thank you!

  Hey @Jeanne33,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet Pro 8500 all-in-One Printer does not appear on your network. I can help you with that.

  1. As you only use Apple products means that the printer is no longer connected to your network or a parameter has been changed on your network. That being said, this is what we will do:
     Turn the printer off.
  2. While the printer is off, remove the power cord at the back of the router for a minute.
  3. When the lights came on the router, turn on the printer.
  4. Try to print.

  At this point if you are not able to print, then we will do the following:

  1. On the printer, click on Configuration, network and wireless view summary.
  2. If you see a line indicating connected the printer is properly connected to the network. If this is not the case, then, from the main screen, click on Configuration, network and wireless configuration wizard to add the printer to your network. Try once done printing.

  At this point, you should be able to print. If the printer still doesn't seem to add as a device for the Mac or appear on any other device and then you have a setting on the router that has changed. Your best option would be to communicate with the person who is provided with the router and ask them to do the following:

  • Open all ports.
  • Select multicast.
  • Disable MAC filtering/MAC cloning.
  • Disable the guest network
  • Make sure that the router has a band of 2.4 GHz.

  Please let me know if this allows you to print or if you have any other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• How to download pictures from a memory card to the computer on the new Officejet 8500 has more?

  I recently replaced an old printer HP psc 2410 photosmart with a new Officejet Pro 8500 has more printer.  The installation went fine without error messages, and it will print, scan and copy very well.  When I insert a memory card into the slot, the printer itself recognizes files and displays them on the LCD screen and offers to print.  BUT... what I want to do is to download the files on my PC (Windows XP), and I can't understand how do!  There is no program of HP that appears and offers to transfer the photos as with my old printer.   I also expected to see the map locations shown as a removable disk, as I did with my old printer, but I don't see them.  In addition, my Photoshop Elements program does not recognize the card slots to be.

  Then it dawned on me that my computer 'sees' map locations because it is not connected directly to the printer!  I created this as a wireless printer and I am totally new to this, so sorry if this is a stupid question... but there no way to transfer files from the PC card slot in a wireless configuration?  I'm totally confused...

  Hello

  If your printer is connected to the network or wireless network, you must access it through the IP address.

  Find the IP address of the printer. You can do this by clicking on the network icon on the front panel of your printer.

  Open Windows explore and type \\xxx.xxx.xxx.xxx"where xxx.xxx.xxx.xxx is the ip address of the printer.

  You will see the memory card slot there.

  You can do a "map network drive" to it if you want your printer card slot to be registered permanently.