OfficeJet 8630: 8630 adf, printing a down line scan or copy pages.

Similar Questions

• I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy _ @ _. ___

  How can I get a copy of the cd that will work with your old software. I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy to * address email is removed from the privacy *

  Hi Oscar,.

  Thanks for the post.

  It seems you are trying to download the application printer and scanner. Please answer the following questions, which will help us to guide you in the right direction.

  1. What is the brand and model of the printer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Send us more information to help you better, we will be happy to help you!

• HP Officejet Pro 8600 Premium: Printer leaves black lines during copy and scan from ADF

  I know this question has been asked several times, but whenever I try to copy or scan from the automatic document feeder, it leaves black lines on the copy (with the document on the works of glass like a charm).  I've read through the forums and have tried the advice to unplug the machine and so on, but none of these suggestions work.  Any help would be appreciated.

  Hey @Huskers1,

  Welcome to the HP's Support Forum!

  I see that you have some problems with a line when copying from the document on your Officejet 8600 Premium feeder e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Get a little water and a lint cloth.
  2. Open the left upper part of the printer, where the document since the charger goes into the printer. It should open up as you opened a book.
  3. With your damp cloth wipe the rubber stamp, the rollers in the cover and the casters on the bottom of this section.
  4. Again open the left side of the printer, as you opened a book.
  5. With your damp cloth, wipe the rollers, you will find inside this section.
  6. Close the upper sections of the printer and open the flat section.
  7. With your damp cloth wipe the rollers and the white bar you see on top of the printer
  8. Clean the glass on the left side of the printer.

  Once all the pieces you cleaned dry, please let me know the results. If you remove the line, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• printer is not showing is not newly installed; color cartridges It prints well but not scan or copy

  I installed new color cartridges, but they do not appear as such in the display panel printer, which continue to save empty color cartridges.

  The printer test page was perfect.  However, the printer is neither scanner nor fax, nor can I access the installation options.

  Sorry you have a problem with scanning and copying after putting the new cartridge in the printer.

  What kind of printer you have?

  You can try to perform a hard reset on the printer. Unplug the power cord at the back of the printer. Leave for 30 seconds and plug it back.

  You can also clean the print head because it can read the contacts on the new cartridge wrong.

• HP OfficeJet 8630: Problem printing Kodak 4 x 6 photo paper

  Using Windows 10 Pro, I set the printer to print 4 x 6 Kodak photo paper.  When I told it to print after a while he can't say no paper in the printer tray, after trying a number of time wherever it will be finally find the book.  The printer has a problem because it is still under warranty.

  @earib

  earib wrote:

  Using Windows 10 Pro, I set the printer to print 4 x 6 Kodak photo paper.  When I told it to print after a while he can't say no paper in the printer tray, after trying a number of time wherever it will be finally find the book.  The printer has a problem because it is still under warranty.

  The printer may be opposed to the paper-Kodak or it can be lost if the media type has been selected for HP Photo paper (and you are not identical).

  Assuming that you have installed the complete functionality for the printer software:

  You can try to select printing options > type of media as "other Photo papers.

  Example:

  Open the image / photo in pictures

  Click settings «...» ' > select print

  Adjust the paper size and media type parameter >

  Adjust other settings > Print

  

  General reference:

  Printing options

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• OfficeJet 6700: ADF works only when you scan not copy

  Our officejet 6700 has an irrational problem - will take the ADF and scanning a document using the pc without problem, but if load you something using the function copy on the machine itself, he acknowledges that he is a responsible original, you hit copy and is not feeding the sheet through and copy from scratch!

  Any ideas?

  Thank you

  Hello @edtech,

  Welcome to the Forums of HP Support! I see that you are not able to use the ADF on your HP Officejet 6700 Premium to make Copies, but you can use it to perform a scan.

  I would like you to do a hard reset:

  1. disconnect all cables and cards of memory in the printer. Unplug the power cord, directly from the back of the printer when the printer is still on.

  2. unplug the other end of the power cord.

  3. If there is a power supply on the power cord, disconnect one end and reconnect it.

  4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup because they can cause the printer to lose over time basic functionality).

  5. connect the power cord to the back of the printer.

  6. the printer should automatically power back upward. If not, turn it on with the power button.

  7. try to make a photocopy (if your printer is a printer all in one) before you connect the cables from the printer.

  8. connect the other cables needed to the printer.

  Are now able to make a copy using the ADF? If you are still unable to make a copy, you will need to contact our technical support at www.hp.com/contacthp/. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• HP Officejet 6700 Premium all -: print OK, but not scan

  I just replaced my old HP computer with a Windows 7 Professional 750-055xt HP computer and my printer scans is no longer. When I hit the scan button I get this message: "open the HP utility. Under scan settings, click Scan to the computer and make sure Enable Scan to computer is selected. "I don't know where to find the HP utility, so I am dead in the water. Any ideas where I could find it?

  HP technicians could not track down the problem by using the remote, so I took my computer and printer to the Geek Squad at best buy. The GS has found a couple of infections that prevent the printer to install the required software. Once the infections have been wiped out and the software installed, everything was fine. All in one day.

• cannot print an in line-i get "untitled page".

  When I try to print from the internet or e-mail, microsoft a note appears at the bottom and the screen reads "untitled page". the printer remains silent and nothing happens.

  Hello

  1 did you change your computer?

  2. what version of internet explore do you use?

  3. what web browser do you use?

  4. What mail client do you use?

  Method 1:

  Step 1:

  If you are using internet explorer, I suggest you follow the link and check.

  I can't print or preview before printing a Web page in Internet Explorer

  http://support.Microsoft.com/kb/973479

  Step 2:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  I can't print or preview before printing a Web page in Internet Explorer

  http://support.Microsoft.com/kb/973479

• OFFICEJET V40: HP OFFICEJET V40 DOES NOT PRINT THE TEST PAGE

  Printing a test page only prints the top line of the test page.

  This printer work with Windows 7 for me.

  I tried to print a document in word with the same result (only the top line of the document will be printed - and errors)

  UNINSTALLING THE SOFTWARE OF PRINTER DRIVER THROUGH THE DEVICE MANAGER SOLVES THE PROBLEM.

  I HAD TO DO SINCE THE DEVICE MANAGER - JUST REMOVE THE DEVICE FROM THE CONSOLE OF THE MACHINE

  SEEMS NOT TO DELETE THE DRIVER SOFTWARE.  AFTER RESTARTING, I RAN THE HP INSTALLATION WIZARD

  THAT FIXED THE PROBLEM AND TEST PRINT WORKS Thank YOU!

• HP officejet 4500 g510n-z print but not scan

  HP officejet 4500 g510n-z prints ok but not scan

  A computer to Windows Vista 32 bit

  7 4 Windows machines

  Windows XP 2 machines

  running on the wireless have not tried usb

  No IP conflict

  worked the last time that I used it (months)

  printer works fine (even if I have to restart now and then after the mode 'sleep')

  latest drivers installed

  Ideas anyone?

  Thank you

  Hi sdrrmit,

  It seems that the printer didn't install correctly on your Windows operating system. Follow the steps below.

  First step: clear temp directory

  1. On desktop applications do a right-click of the mouse and select applications. In the application run, type %temp% .
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  The complete solution software

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. on desktop applications do a right-click of the mouse and select applications. In the application run, type %temp% .

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run Disk Cleanup by pressing the Windows and R key at the same time back the term calls and Type cleanmgr.exe and press to enter.  Select all the boxes and all delete. Click on the link below about this tool and no disclaimer.

  Cleanmgr Disclaimer

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• The line of the last line of each table page is going to be missing.

  Hi Experts,
  In OBIEE 11.1.1.6.0, I have a report contains more than one line. "When I click on" PDF "Print", the last line of each table page line will be missing. " Why?
  Are you facing the same case? How soluve this question? Thank you.

  Hey Kobe,

  The question, looks lke a bug. Here's the work around, change the table view, click the properties of content next to the text "Table" (at the top of the columns and measures) in the layout-> position In Border pane to choose custom and select only the bottom edge (horizontal line). Now export to pdf format, you must see the border for the last row on each page.

  Kind regards
  DpKa

• HP Photosmart 5520 - can print but scan and copy the work of doesn´t

  Hello

  I just bought a HP all in one Photosmart 5520. It works fine as a printer, but when I scan or copy I get a 'white' scan / paper in white. And Yes, the text on the paper was facing the Analyzer anyone know whatcould wrong?

  Thanks for the reply AndersRH.

  Sorry to hear about the issue. Because it seems to be a hardware malfunction, I suggest you call the Tech Support of HP. They may be able to give two options for replacement or trade in options.

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Take care

• HP Officejet Pro 8630: Test Print "error - printing".

  Hello

  I have problems printing in the main printer in my office, the HP Officejet Pro 8630. Some work colleagues print to this printer without problem, and others have gave up on it as well. I have no printing problem with HP Officejet Pro 8600 to an office close to home.

  I have finally connected to this printer manually, using its IP address, because it does not appear in the search "add a printer". When I try to do a test print, in the print queue of the printer window, it shows its status as 'Impression' for a brief moment before changing to "error - printing".

  Honestly I don't know what else to do without disturbing the few people who are successfully using this printer. I hate my work colleague whenever I need to use their printer bug.

  Hi @klewald,

  I want to help you with printing problems you encounter. I understand that you can not print, but your colleagues can. I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When address us the issue, I would you kindly mark the appropriate post as accept as Solution so that others have the same or similar problem can find what worked for you.

  In my opinion, the best approach is to start to run printing HP and doctor Scan because if it does not solve the problem, he could at least help to identify the root cause and point us in the right direction.

  Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• OfficeJet 8630 "an error has occurred in printing"

  New OfficeJet 8630 on a wired network.  I installed the software on Windows 7 x 64, everything seemed to go OK.  But when you try to print, I get the message "an error has occurred while printing" and nothing comes out.

  HP Print and Scan Doctor shows no errors and the test page prints correctly.

  When I go into the properties of the printer and look at the port, the description is "rediscovery HP port monitor.  Try to configure this port produces the message "an error occurred during port configuration.  Impossible operation completed (error 0x0000007b).

  I can connect with the browser to the IP address of the printer and everything works fine.  Just print and the configuration of the port do not work.  I have yet to try the other functions.

  I tried to restart after these tests, without change.

  I also deleted all software (via Add/Remove Programs), rebooted and reinstalled the software, without success.

  Another nitpick - when I installed the software the first time, he showed the devices page and printers "HP Officejet Pro 8630 (network).  The second time I install it, the printer is listed as "Fax - HP Officejet Pro 8630 (network).  Both had the same options in the menu options - but why the name change?

  TiA.

  Jerry

  Hey @jstuckle,

  In a commercial environment, the consumer level home and Home Office HP Officejet Pro 8630 e-all-in-one printer may be not the best choice for high quality OCR scans. The 8630 Officejet Pro is provided with a trial version of the software ReadIris pro OCR scanning. But as I said, this is only a trial. If you need high quality with all the features OCR scans you might focus on the full version of the OCR Readiris software: Readiris 14: OCR software

  I'm sorry that the 8630 Officejet is not adapted to your needs. However, I appreciate all the time you spent trying to solve your driver conflicts. Also, thank you for your patience throughout this process.

  If you want to explore other options that can be put at your disposal, I would recommend contacting the Technical Support queue by phone.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Thanks again for joining the Forums of HP Support. Good luck!

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.