OfficeJet J4680 no analysis

Similar Questions

• I have a printer hp officejet j4680 and windows 7. I can't use the cd to install for analysis.

  I have Windows 7 and I have a HP Officejet j4680, I couldn't use the instillation Cd to install the printer, but my computer has found the driver. The problem is that I have to analyze something and scan Windows fax program cannot find the scanner. How can I make the computer recognizes the part scan of the printer?

  Thank you Sandy

  Hi Sandy. I suggest if you could go to this site http://www.hp.com/customercare and find your product here. Once do you it please download the Setup online to re register the printer on your computer system.

  Because if you don't base drivers will not install correctly.

  Thank you!

• Unable to scan from officejet j4680 for Mac OS10.6

  I get an "unknown error" message when I try to scan from officejet j4680 on my Mac (OS 10.6).  I can print, but not an analysis.  Are there simple troubleshooting patches?  Thanks, Gil

  Restart the Mac,

  Apple menu > software update... Install updates

  If it does not perform these steps:

  • Applications
  • Uninstalling HP * warning step below it will remove all THE HP software *.
  • Hold down CTRL and CMD and Option on your keyboard while clicking on uninstall to remove all software
  • Apple menu > System Preferences > print and fax
  • Hold down the CTRL key and click in the white box on the left side.
  • Release CTRL key, and then click Reset printing system
  • Applications > utilities > disk utility
  • Check the permissions of the drive
  • Repair disk permissions,
  • Download the latest software from HP
  • http://FTP.HP.com/pub/softlib/software10/COL30074/MP-74787-1/HP_Installer_Officejet_Full_Group04_10.3.dmg
  • Install and try to start a new search

• All-in-one Officejet J4680: how to set scan to scan the document without cropping afterwards

  Is it possible to configure the scanner so that when I scan a document, the digital space includes only the document itself and not the whole scan bed? In its current form, I have to crop each document to remove the excessive scanning area that is not part of the document.

  @JonnD14

  Install the software of full functionality for the printer.

  Printer:

  Range of all-in-one printers, HP Officejet J4680

  Full software features:

  File name: OJJ4600_Full_14.exe

• OfficeJet J4680: HP Officejet J4680 - Windows 10

  I upgraded my OS from Win 7 to 10.

  While on my laptop HP programs and detection of the printer worked (WiFI), on my PC, it failed to recognize my printer that was installed.

  by pugging USB cable it acknowledged him as a scanner and it works through the program to scan windows

  Add another printer through the devices Panel found that web connected but does not print.

  Finally, in the HP site I found a download for WIN 10, but download constantely fails as begginning, even after the cancellation of the fire walls.

  Bottom line - I can't use my printer on the PC with WIN 10

  Hi @Shlom,

  Welcome to the HP Forums!

  I see that you have problems to use your HP Officejet J4680 printer, on the operating system Windows 10. I'm happy to help you!

  To check the printer hardware is functional, you are able to print a test page? Video: printing a Test Page.

  In the meantime, try the following steps:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows.

  Hope that these aid measures and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Officejet J4680 question 'FATAL ERROR' on XP software installation

  I'm having a problem with the installation of the software for the Officejet J4680. I am running XP, and when it gets to 96% it seems to stall then later a bit shows a fatal error during the Setup error.

  The printer is installed and I can print (wireless) but when I click on the HP Solution Center a note appears saying "no HP devices have been detected. Solution Center HP close now. "Then, of course, the software has not installed correctly. I hope that this is a common problem that can be fixed quite easy.

  Thanks in advance for any help!

  Troubleshooting steps here can help.  There are also several updates and a new driver that was published a few weeks available for download from HP here.

• OfficeJet J4680 fax failure - need some tips from a pro!

  I have an OfficeJet J4680 and has a few problems. I send a daily fax for a number, and sometimes it sounds as if she's going through, but then the note of fax has failed is displayed. The Party on the other line said fax machine NOT ring although I distintly hear 5 rings, and then a noise indicating it connected.

  Also, sometimes there is a fast busy signal and of course, this does not work as well. I am told that I am the only person having problems sending their number. And some days, it works perfectly.

  I ran a Test Fax Rport and everything. Any suggestions?

  Hi Mylan,

  This looks like a problem on their side. Use the Service of fax HP Test to test your Fax to send & receive faxes.

  HP has a number of Test Fax Service to test fax HP products. It is available in the United States only. The telephone number for this service is 1-888-HPFaxme (1-888-473-2963). The fax service receives faxes and returns faxes within 5-7 minutes to the number in the fax header. Note: You must ensure that you have your fax header completely filled in with name and fax number or you will not get a fax back service.

• Print job is stuck in the print queue and cannot be removed in HP OfficeJet J4680

  Original title: HP OfficeJet J4680

  Print job is stuck in the queue and cannot be deleted.  Convenience store said it is fixed, but it isn't.

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. what operating system is installed on your computer?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. you receive an error code or message?

  4. what store did you try?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

   

  Please follow the steps in the link below and check the issue.

  Unable to print? Print jobs are stuck in the print queue:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02205477&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3692888

  For reference:

   

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

   

  I hope that the information above helps you.

• OfficeJet J4680: Officejet J4680 ghosts and print at an angle

  Hello

  I have an Officejet J4680 all-in-one and he has recently started printing eratically.  No matter if it is print or copy again, gives the same results.  The picture suggests that the document is either slipping or getting stuck fingers in the stages of printing.  If printing is slower that it works better, but I can't get a full page of printing without a failure.

  Some lines are ghosts about one inch further down the page, some are printed in a light and appear to stretch, others are printed twice.

  Help, please!

  Hey @Chippy_T,

  Welcome to the Forum from HP Support.

  I see that you are having print quality problems when printing and copy with your printer HP Officejet J4680 all-in-One. I want to help you with this. I have some suggestions that might help.

  I recommend a detailed to deal with ghosting and biased text troubleshooting process. Try the following steps:

  We will attack first - feeding of the printer mechanism

  Clean the rollers

  Residue of paper or dust on the rollers inside the product, or on the rear access door can cause paper feeding problems. Follow these steps to clean the rollers.

• Windows 7 - driver Officejet J4680

  If the search around some of the other threads, looks like my Officejet J4680 fell into several printers that lack full 7 drivers HP.

  It is indeed listed as compatible here:

  http://h41112.www4.HP.com/promo/win7web/printer-support/us/en/OfficeJet.html

  However, under Windows 7 64 bit, it shows only a CD that throws and error if you attempt to select:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=4063&LC=en&DLC=en&cc=us&product=3692888&lang=en

  The printer is used wireless and indeed prints using the driver provided the OS, but cannot scan.

  -------------------------

  I've seen some referring to availability for pilots from mid-November and some posts have said Jan, but nothing very specific. I think I even saw a single line which has drivers from now on.

  What is the official statement from HP for when they expect availability for these drivers for this specific model/line?

  (Or possibly a link to the date of delivery for all printers officejet taken in charge.)

  Is there no workaround scanning wireless solution in the meantime?

  I write about my experience with the Officejet J4680. I hope that the lessons will be useful to other owners of this model, or possibly other models who have similar problems.

  1 HP did not have ALL the drivers at the launch. So I waited until what they first appeared about 1/2 weeks later.

  2. once they have increased, there was some other printer randomly on the same page, and the link to the download was named the same for both. If you guess and then look at the name of the installation file to tell if it was good. This has since been fixed.

  4. on the download of the driver version 'basic', it systematically fails at the end of the installation. CANNOT install this printer for use with the base driver wireless.

  The installation process see the printer, connects and displays the address mac and other information, but fails on the final progress without apparent reason bar (only "unable to connect" appears).

  No debug information has been proposed by the installer on why this happened however. Choose the option to retry fails as well. Reboot and try again also fails.

  After that several installation attempts, I downloaded the full version instead.

  5 laps, I need "imaging" to the INSTALLATION service found only in the full version of the driver installation. So at the beginning of the installation I can uncheck everything except for the image service and the pilot himself.

  Remember, I don't have the driver of imagery to RUN the printer and scanner. I just need for the installation process to complete. I can remove/disable it later.

  6. then, by the admission of the HP Imaging for the scanner connect will throw an error of connection at startup every time (essentially what makes the useless service). It also means that I can't scan from the printer itself by using the HP software provided.

  7. Finally. as the confession of the HP, Windows 7 includes Windows Fax and Scan functions.

  So, in the end, I got the impression and scanning to work (which required the function to scan no HP windows). The hoops I had to jump through, are unacceptable to a large professional company like HP.

  HP, if you can't fix the scan driver (which seems to be the case, since it's been broken in Vista well before now), difficulty at least your installation. Because currently you MUST install your driver CERTAINLY BROKEN just to make it work.

  Ridiculous.

• HP officejet J4680 does not print to web

  I have an officejet J4680 which does not print web pages, it prints everything else as of the word, but it will not print from the internet. I have the windows operating system 7. If anyone knows why it's hapenning let me know, thanks

  I'm sorry you have a problem of internet printing.

  Try to open another browser and printer. (Firefox, Google Chrome, etc.).

  Alternatively, you can try to restart the computer and see if it works later.

• HP Officejet J4680 series: all-in-one HP Officejet J4680 series will not print Word documents

  My HP Officejet J4680 all-in-one ink jet printer will not print in Word 2010 documents. It will print .pdf and Excel 2010 documents. I ran printing HP and doctor Scan and check it and put to date and said all is fine. Just around checking on my computer it said in the devices that the printer is ok. I printed the test from the doctor of Hp Plug and it came out ok. Seems so that Word documents are the only problem. I installed Windows 10 earlier so not totally sure that's the problem I don't remember if I used the word since installation up to now.

  I bought this printer in 2010 and have had no problems with it and I can tell you that I have printed a large NUMBER of pages.

  Any ideas how to get this printer working?

  Thank you!

  Hey @Ric88xx, welcome to the Forums of HP!

  I'd love to help you with your JO J4680. I understand that you are unable to print from Word, but you can print the PDF and Excel. Please use the following article from Microsoft to solve the problem and I would like to know the results of your efforts: How to troubleshoot printing in Word failures.

  If this resolves the issue, please click Accept as Solution button below. If the problem persists, let me know and I will do everything I can to help. Thank you.

• OfficeJet J4680: Officejet J4680 offline in the middle of Windows 10 nightmare & does not print

  I am running Windows 7 Home Premium 64-bit, and I am logged on as administrator. I am still immersed in an effort to remove Windows 7 after only 10 Windows, but not download or install a week ago. Apparently you updates of Windows is the culprit, and I restored it to what I hoped, was that before this poison pill, but I'm still real messed up. I'm still trying to determine what update caused the damage and uninstall.

  My Officejet J4680 printer hooked up on a print job and would not remove the work hung, so I unplugged and restarted the printer and restarted the computer. This printer has been disconnected, and I couldn't get it online.

  Softwear by printing HP and Dr. 4.7 update installed HP Officejet full feature software scan and driver 14.0.301.0 Got message "HP Support Solutions framework installed successfully. However, there was a problem to download/install HP Support Assistant. He will be tried again later. "Try later on its own or do I have to re - run?

  The network connection seems OK, (active port and driver, both seemed to be correct) and I tried to reinstall printer with "wired (Ethernet) or wireless network. Reinstalled successfully, the printer is shared, printed the test page, Logo Windows and "Windows Printer Test Page" printed, rest of the page is empty.

  All ideas, need more information, or should I just go ahead and try to uninstall the software and try again? Don't know how much of the nightmare of Windows 10 contributes to this. Hope someone has some ideas, that my brain is fried now!

  Hey @vh08-2015,.

  Thanks for getting back to me with all this detailed information!

  It shows your HP Officejet to use a "universal print driver" in your screenshots. In addition, because copies of your printer show installed as 'HPFCEF6D' it indicates that the universal print driver or the Windows driver is used to provide basic printing capability only. It does not resemble your HP Officejet Full Feature print and scan driver is actually installed at all at this stage.

  1. you can permanently delete all the copies of your printer showing installed at this time without worry, as we will reinstall your printer with the appropriate printer driver.

  2. once the printer has been removed from devices and printers (and the Device Manager if it allows) then proceed to step 4 to delete the files Temp.

  3 once the Temp files deleted using download full feature software and driver I've provided previously. When clear us Temp files it erases the download files downloaded and extracted to the installer so by deleting Temp files under step 4 , you will have a clean slate to work with the new download and install.

  4. you should be safe with just after the uninstallation steps I provided earlier rather then by running the brosseuse that you downloaded. Because the package full feature software and driver shows not currently installed and used by your printer probable scrubber won't do much.

  Good luck with reinstall it! I would like to know if you are having problems or have further questions.

• OfficeJet J4680 stuck in the mode of winding

  Hello

  I had used my Officejet J4680 yesterday without any problem.  When I went to use today icon was flashing to change black cartridge.  I did and then did the alignment with no problems.  However, I then went to print a word document, nothing happens.  When I click the icon in the taskbar, it says coil - print and nothing else happens.  I then cancelled the print job and tried again with the same results.

  I then opened the center of solution to make sure that it states that the printer is connected and that it is.  I then tried to print a test page and nothing was happening once again.  So I turned off the printer and have just turned it on on and it will print the test page so I clicked and then to print a page of diagnostics and that too with print.

  I tried and then print the document again and this time it works great.  However, I tried printing again about an hour later with the same problem and had to start the whole process again.

  Any ideas as to why this happens?  I'm running windows Vista Home Premium (32 bit) and I the current up-to-date drivers for the printer installed as well as everything on the pc is up-to-date.  It was working fine yesterday without any problems and nothing has changed between yesterday and today, so I can't understand why this could happen.

  Thank you

  Hey,.

  I see that you have a problem with obtaining print jobs to print.  It seems that jobs stay stuck in the print queue.  You mentioned that you can roll the printer, but when was the last time the PC restarted?

  For example, how the printer is connected to the PC? (USB, ethernet, wireless)

  I would advise to restart the PC, if it is not fact and executes printing HP and doctor Scan.  The PSDR HP is a troubleshooting tool automated to print/scanning issues.  To access the PSDR click here.

  Is that get your printer working correctly?

• is hp officejet j4680 compatible computer windows vista laptop

  the hp officejet j4680 works with windows vista laptop

  Yes.  You can download the Windows Vista drivers for it from page downloads of the software & driver Officejet J4680 HP. Boulder computer Maven
  Most Microsoft Valuable Professional