OfficeJet j6480 image is shifted to the top of the paper with a huge margin at the bottom.

Similar Questions

• U2412M, Amazon bought, the image is moved to the bottom about 1 cm

  I have the same problem, but my screen image is shifted down to 1 cm.

  -monitor is purchased from Amazon U2412M

  -using the Lenovo thinkpad w / Intel HD graphics

  -Windows 7 Pro

  -connected using supplied blue Dell VGA cord

  I just got this less a few days there, so I was wondering if I just Exchange the monitor for a new.  The adjustment of vertical positioning in the display settings is not responding. Horizontal seems to work very well however.

  Thanks for any input

  JC

  jxch,

  Assumimg you use this in a dual monitor extended desktop (screen laptop + U2412M) configuration? In portable display properties, it shows the U2412M as 1920 x 1200 60 Hz?

  * Monitor press the Menu button to open the OSD (On Screen Display) menu
  * Go to the other parameters - Factory Reset
  * Choose Reset all settings

  Any difference after doing the Reset?

• JQuery fullscreen images are cropped at the bottom.

  When one image is displayed in the viewer full screen it's cropped at the bottom. I checked and changed all sorts of properties of the page without result.

  I hope someone can help.

  Ashley.

  

  Hi Ashley

  I checked, please try these steps of the suggestion:

  (1) select the "Container" of the "Lightbox-slideshow".

  (2) open Panel "Spacing" then do left, right, top and bottom values to "0".

  Then preview the page, it should show the image full screen without any cut down part.

  Thank you

  Sanjit

• HP officejet j6480 prints duplex, even if the duplex unit is installed. any suggestions?

  I can print but the printer does not print duplex not. He claims the duplex unit is not installed, even though I have the double (or triple) checked to make sure it is installed. If I want to print two-sided I re - insert the paper.

  edmpca,

  Try these steps that should help you set up correctly:

  1. click on Windows icon () on the taskbar > Control Panel > printers

  2 right click on the printer icon.

  3. click on properties and then click on the device settings tab.

  4. click on the plus sign (+) next to Options installable to extend it if necessary.

  5. click on the duplex unit to activate the menu drop down.

  6. click on the dropdown next to the unit duplex, then select installed.

  7. click on apply and then click OK.

  Let us know if it helps. Good luck!

• HP Office Jet J6480: high load or work around the Board in an HP Officejet J6480

  My HP Officejet j6480 isn't all recognize the high bypass tray of the page. I would like to know how to do so that he can feed on this top. So are there specific instructions to put a sheet of labels badge or business card labels in this sandbox?

  I tried to load sheets of labels into the tray of ordinary inside and crunched printer just to the top of the label.

  Hello @klsurmi,

  Welcome to the Forums of HP Support!

  I understand that you are having problems loading labels in HP Officejet J6480 all-in-one printer. I would like to help you today with this problem to feed paper. On this particular model of printer paper for printing a single sandbox there. It is the main tray at the bottom of the printer. The 'top' I believe you are talking is only used for faxing, copying or scanning automatic document feeder. Below, I will give instructions for properly loading paper in the tray of your product. Once you have confirmed that your labels are properly loaded we will test print in order to confirm if the problem is resolved.

  Step 1: Load the paper:

  1. lift the output tray.

  

  2. Insert the paper with the side to be printed down along the right side of the status bar. Make sure the stack of paper is aligned with the right and rear of the tray edges, and the height does not exceed the line marking in the status bar.

  

  3. slide the paper in the tray to fit the paper size you have loaded.

  

  4. lower the output tray and pull out the tray extension.

  

  -Source

  • For the labels, you can load up to 100 sheets of labels in the paper tray at the same time.

  Once the labels have been loaded properly, please print a test to confirm if the paper feed problem has been resolved. If the problem persists please let me know that the size and weight of the paper label is that you use.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Change image 2500 pixels on the long side

  I posted earlier but just found out how to change my dpi of an image from 300 to 72 dpi. (Could not find my post above).

  Now I would like, if possible, in order to publish them, it's like a book on the Kindle cover, change the number of pixels on the longest side of the image on the recommended 2500 Pixels. (Right now the image I am interested is slightly more than that on the long side.).

  1. Go to image > resize > resize the image. It would launch a dialog box resize image.
  2. In the bottom of the dialog box, choose "resampling". in the drop down menu below, you can choose the resampling algorithm. Since you said that the image that you are interested in is a little more than 2,500, you should choose Bicubic Sharper. To learn more about the resampling algorithms, refer to https://helpx.adobe.com/photoshop-elements/using/resizing.html#resample_an_image
  3. Once you choose the option "resample image", it would allow the dimensions of pixel of the dialog box.
  4. change the height (or width) at 2500 depending on which side is the longest side.
  5. Click ok

• Cannot add image to my work without picking up transparency on the bottom

  I worked on a brochure template and added or vectorization, the linework files on a color background, used multiply panal seamlessly, and passed out to them. They were going to bottom in transparency to blend in with the background color. Which was very good. But now, I'm ready to put more pictures of PS and place it on this same background partially covering on the line drawings as they simulate an old manuscript background. But when I put my picture on the drawings covering the bottom they show in my image file. I got tired of the place and then copy and paste to get there. I don't want the background through this time. I thought that maybe it's my image and the layer of transparency used to make a ragged edge frame so I went back to photoshop and drag on one layer transparent. NO change in the placement of the image. I went back to the PS and the flattened file. No change in the image. So now it's the transparency of drawing files already on the bottom. How do I get the images to place on the bottom in their solid colors and do not show under the bottom lining through them?

  It would be useful to see a screen shot showing the problem.

  Check your layers panel. Looks like you place the PSD files on a layer below that your transparency (proliferation) of objects. Another possibility is that the layer on the PSD is has its own transparency. Click on the small circle to the right of the layer name in the layers panel, hen watch the transparency Panel.

• Floating frame - melted at the bottom

  Hey guys,.

  I can't get this to work. I have a floating frame, and I would like to have a subtle shading the bottom of it.

  I know how this Flash etc.: create a gradient image/chart of total transparency to white (or your background color) and superimpose on top of the framework.

  But when I try to do this in InDesign, the floating frame is located at the top of all the rest.

  Is there a way to get the videographic image degraded to sit on top of the overlay? Maybe making it into some form of superposition?

  Adobe life 2012 application has it put in place. See attached screenshot.

  Thanks in advance for any guidance.

  

  It's pretty easy, I just learned this.  All you need to do is create a MOS (Multi State Object) with an image with a gradient and color that matches your border scroll background.  It must be a MOS because it can be sitting/living on top of the moving image.

  So first, you create the gradient to sit on top of the SF.  Say for example using your example, make white transparent degraded discoloration.  Are the same width as your SF.  Make about a half inch or so great.  Make two identical copies and give it to a MOS.  In the Overlay creator set the 'Auto Play' and 'Play' MOS 1 and check «Stop and last Image» Place this at the bottom of your SF MOS and it will give the effect of it fading as it scrolls.  Play with the spacing of your SF to make sure it sounds good when scrolling.

  I hope this helps.

• Officejet J6480 carriage jams when printing wirelessly via the plugin from HP printing service

  I try to print on my printer OfficeJet J6480 HP all-in-one to my Samsung Galaxy Tab 3 tablet that runs Android 4.4 Wireless using the "HP Print Service Plugin on the tablet.

  Measures already taken;

  Sucessfully downloaded/installed the Service HP Print on shelf Plugin

  Radio wireless to the printer and correctly configured to communicate with the router wirelessly activated successfully.

  Problem:

  When you try to print something from the tablet to the wireless printer, the printer is trying to perform the print operation (flow paper in the printer from paper tray, shows 'Printing' on the printer screen), but then never made a real impression and gets a 'Transport Jam' indication on the printer screen.

  When this occurs above, I opened the hood top, checked for jammed paper in the paper path (Nothing), did tension of printer many times, cycle of fact alignments cleanings and cartridge many times, changed the paper to different types of paper.

  None of these actions corrected the problem...

  I'll also add that when you perform the steps of printing with the radio wireless on off the printer and the cable connected to the printer, the printer functions normally when you print from my pc applications - no traffic jams. Also, the printer works normally when you perform a function 'copy' locally from the printer control panel - not roadways of jams.

  I thought maybe an update of the firmware to the printer could solve this problem - ideas about this being a likely solution?

  BTW - how you normally clear / would correct a cart-jam regardless of printing wirelessly or through an ethernet cable?

  If the firmware update is not a solution, any comment on what could be the cause of the problem?

  If an update is available, could you tell me how to do the upgrade and where can I download it from?

  Thanks for all your comments... Denny

  E - rog,

  Two things I wanted to first of all thank you a lot for the response to my original message concerning the problem of printing wirelessly to my printer HP J6480 of the Tablet, Samsung Galaxy Tab 3 via the Plugin of Service HP Print.

  Secondly, I wanted to aplogize for the very long delay in responding to your... I had some health problems with a family member who prevented me to try your suggestions to the problem.

  I am pleased to report that I managed to solve the problem... I am now able to print to the printer of the tablet.

  A little history on the fix...

  I tried to download and install the update of the firmware from the link you provided, while having the printer connected to the PC (Windows) computer via a USB connection, as you suggest. (It was initially connected through my home network, so I had to first uninstall, then reinstall via USB connection). When you try to install the downloaded firmware it failed, even after several attempts to re-downloading/reinstalling.

  Instead, I uninstalled the printer again, reinstalled over the home network, downloaded the update of the firmware directly from the HP site by locating the printer model, then the firmware. This time the firmware successfully installed (was able to view the progress of installation of the firmware in the display on the front panel of the printer). Make the installation of the firmware with the printer installed on the network domestic (instead fo via USB), the installation process allowed me to search for the printer on the network - it found it successfully and successfully installed the firmware.

  After this successful firmware installation and turn on the wireless radio on the printer (via the button on the front panel), I was able to print successfully from the tablet... YES!

  Needless to say, there is no carriage jam messages as before... and I did not try your other suggestions to go to the HP article on carriage jam error States/solutions.

  I am really gratefull for your response/suggestions...fixing this problem did the usefulness of my tablet to increase dramatically to have the ability to print... cudos to you for your efforts on this forum and a big "thumbs up" for your records.

  Denny

• Last night suddenly when I right click view image in firefox, they appear centered and on a black background. He is generally meant to be a white background and the image that appears at the top left. How to get back to it?

  I have a problem with something in firefox, it is quite minor, but still bothers me. Last night suddenly when I right click view image in firefox, they appear centered and on a black background. He is generally meant to be a white background and the image that appears at the top left. I don't remember what I did to change this if it's my fault; If anyone knows how to get back to it, I would be grateful.

  This is the new behavior in Firefox 11.

  • Old Style of default Image: https://addons.mozilla.org/firefox/addon/old-default-image-style/

  See also:

  • [923127/questions/923127]
  • http://userstyles.org/styles/58710/Firefox-11-change-image-view-background
  • http://forums.mozillazine.org/viewtopic.php?f=38 & t = 2443535

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• OfficeJet J6480 continue to feed the blank sheets after the last page of the print document then blocks.

  When you print a document on my OfficeJet J6480, once the last page printed, the cradle of the cartridge moves back several times, then one or two white sheets feed through the printer. Sheets then another feeds and jams, requiring the duplexer to be deleted to clear the jam. This happens on 95% of the print jobs sent to the printer.

  Windows XP SP3

  Unfortunately, the troubleshooting steps a false paper jam and find a real fundamentally the same.
  I included a link to a document that is for a paper jam error. However, I'm sure you did 1st two solutions and if you please go above them, I want you to try, is the cleaning of the rollers and the duplexer and reset the products and checking the firmware to ensure that it is up-to-date. These solutions are listed in the order and you can find instructions step by step in this link for each step. Reset will be particularly important because it is one of the most effective tools to correct the problems of material with a printer. Here is the link: http://support.hp.com/us-en/document/c01312792

• Printing images inserted on Windows 2003 with some of the top printed at the bottom

  The printer is a Photosmart D7560. Images inserted into a Word 2003 document were still part of the top (which seems to vary) printed at the bottom of the image, despite the Preview Print shows images correctly. The text above and below the pictures will print correctly. Document prints correctly on a Canon i850 printer.

  Ok. I lowered my butt and try the HP Deskjet 450 driver first. He wouldn't do anything. I then tried the 990 c driver and here, the photos printed OK.  So, I conclude that the programmer who made D7560 h driver was working Monday after a 3-day weekend. But this is a good interim solution. I doubt if HP will repair the driver D7560 h, but at least I don't have to rely on the Canon i850, if she should die an untimely death.

  Thank you!

• Restore the ability to fax for HP OfficeJet J6480 Cougar (or Lion)

  Once he was once, in a very beautiful land ruled by snow leopards, I had my HP OfficeJet J6480 installed twice - a queue as a printer and a queue by fax.  I rarely used the fax, and somewhere along the line between SL and Lion Mountain Lion, the queue were lost or thrown away (probably in a printer purge when I had printing problems).  Now I would like to resume until fax feature of driver under Mountain Lion (preferably) Although a Lion-only solution would also be allowed (the backup computer is still running Lion).

  Support Apple had me to connect via USB, I could see the printer as a 'multipurpose device', he added this way, but it shows still only printing/scanning tabs when I have this selected queue.  No Fax tab.

  Is it possible to find the fax feature it at the wheel of one of these Mac?

  Hi UncaredFor,

  I would try to help you with a happy ending for your HP fairy tale.

  First of all, I would like to know if you have already run the update once you have added to the print queue of the printer. If this isn't the case, run the Apple software update - if you get the HP Printer Driver Update 2.11 Please install it. Open printing preferences again & system scan, and then click the 'more'. You may need to wait a little longer for the device to appear with the amiable Fax HP (do not choose one with the friendly all-in-one HP this time, because it will only add the queue for printer and scanner, but not fax).

  In the case of the SU does not have the ability to install the HP printer driver update, you can download and install the package from the Apple website: http://support.apple.com/kb/DL907

  I hope the information is useful.

• OfficeJet J6480 how to stop the HP Solutions Center opens automatically on the screen?

  Printer Officejet J6480, Vista, connected to the laptop cable AND Wireless may be also (not sure wireless).

  Always after that laptop starts upward and often while on Internet - the HP Solutions Center program opens automatically.  It passes through the small boxes asking to install with CD, etc opening.  I stop them and then Solutions Center opens in any case.  This happens in all work on laptop.   And especially, even if you use the printer manually.

  How to disable?

  I realize it may have something to do with the configuration and use of the cable linking the two...

  (My setup is very sensitive and was having too much difficulty with the fax configuration.  Always of the problems there, too.)

  Any ideas?

  Much appreciated!

  Hi HP-CompaqPC,

  I understand that you have a J6480 Officejet which continues to run through the installation of the solution Center whenever your computer starts up. I'm sorry to hear that, but will definitely do my best to help you.

  I would recommend that you download and run the HP print and Scan Doctor and he should be able to identify what the problem is and make some suggestions on how to fix it.

  I would like to know how this happens, have a great day!