OfficeJet Pro 6830: Recovery saved faxes

Similar Questions

• HP Officejet Pro 6830: Receive faxes with a HP officejet pro 6830 w / answering machine

  I had an OLD officejet model that could receive faxes even if the answering machine was not connected directly to the fax machine the 6830 manual says that it must be directly connected.  My current Brother printer does NOT receive faxes because of this problem.  Anyone know if I directly connect my machine to this model (Officejet 6830) to make it work?  I won't buy it if it will not work.

  Hello @JPJ408,

  Welcome to the Forums of HP Support!

  I understand that you are looking to buy a printer all-in-one HP Officejet Pro 6830 for fax purposes. While the User Guide advise you to plug the answering machine directly on the back of the Officejet unit, it is not necessary.

  If you have a fax with an answering machine on her line, the only requirement is that the fax is set to two rings higher than the answering machine. Most of the responders are put back on 4 rings. As a result, you would set your Officejet to automatically pick up on 6 rings. In this way, when a voice is heard, you can manually respond to the call before the answering machine to pick up. If you are not home and then people can still leave messages on your answering machine. If you have a fax to come through, do not respond. The answering machine will pick up after 4 rings. At this point the fax machine "listen" on answering machine message and if fax tones are detected, the fax will take over and receive the fax.

  I hope this helps clear up any confusion.

• OfficeJet pro 6830: continuous fax tone

  I recently bought a HP Officejet Pro 6830, I do not use the installation of fax and therefore it is not connected to a phone line. All the time that printing is turned on there is a tone of continuous fax from the printer, I tried to disable all the Fax options on the Tools menu, but nothing can stop the very annoying tone - of ideas?

  Thanks for that Z, they send that another block so hope it does the trick - John

• Fax - HP Officejet Pro 6830: how to remove how remove the 'Fax - 6830 (network) HP Officejet Pro printers list option.

  How can I remove the "Fax - HP Officejet Pro 6830 (network)" option in the list of candidates of printer? First of all, I am a VoIP client and my salesman, like many others, does not fax support. In second place both my wife and I inadvertently try to print using this entry much to our annoyance. In third place for a non-commercial customer, it's an archaic device and that there should be a way to turn it off. "Fax - HP Officejet Pro 6830" does not appear in "Devices and printers", but it is in the registry.

  There is no entry "FAX". I gave up. I would attach a print screen, but I don't see how.

• HP OfficeJet Pro 6830: HP OfficeJet Pro Fax PC problem 6830

  Dear HP,

  I bought the HP OfficeJet Pro 6830 for its PC FAX, feature that was presented in the manual which shows how to do it, but after installing the software and all updates on your official website, I could not the receiving fax MACHINE to the computer. I can send FROM the PC without any problem. But the reception is a problem, especially after you saw that this model has this application. In the software or in the browser userface there is a digital Fax Setup Assistant. In the included installation CD, there is the PC FAX drivers

  drivers\fax\x32

  HPOJ6830FaxPCSendDialogUI.dll

  HPOJ6830FaxPCSendRenderPlugin.dll

  drivers\fax

  HPOJ6830FaxPCSend

  who says it's possible.

  your help is appreciated.

  Best regards.

  Hi @Ozer!

  Welcome to the HP Forums.

  I understand you have a problem affecting up to receive fax from your HP Officejet Pro 6830 e-all-in-one printer to your computer digitally. I want to help you with this.

  According to me, that the steps outlined in the following document will help you to install the digital fax capability you're looking for:

  HP Officejet Pro 6810 6830 e - all-in - One Printer Series - HP Digital Fax not available on a network connection installed

  Please reply to let me know if it works for you!

  Thanks for posting.

  

• HP Officejet Pro 6830: HP Solution Center

  It was time to replace my HP Officejet 6310 printer. I wanted to stay with the brand HP because I need to use the HP Solution Center software provided with the printer to manage all of my scan, print and fax. So, I bought the HP Officejet Pro 6830. This model does not include the HP Solution Center! It was rather the HP printer Assistant who does not have the features I need. I called HP to see which models have the HP Solution Center, but she says she does not have a list. And I can not find this software listed in the product description so that shopping for HP printers. Help, please! I need to buy a print-scan-fax HP device that has the HP Solution Center software. Here is a link to a previous HP Support Forum stating that the HP Solution Center software is not affiliated in any way with the Officejet Pro 6830 and can not detect the device of this model: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP6830-not-recognized-in-HP-Solution-C...

  I called HP technical support. The HP Solution Center 'is no longer supported"all new models.

  So here's what I can do is no longer with the HP printers:

  1. can't see up close the image I'm scanning. So, I can't crop accurately and make fine adjustments.

  2. granular scanning quality PDF. I scanned "line" or text in black and white mode and this is a resolution low resolution, despite the use of 300 dpi and brightness adjustment.

  3. limited to 300 dpi PDF.

  4. no characteristic clipping for scanning matrix photos in newspapers.

  5 JPG limited to 1200 dpi (opportunity to Solution Center with 9600).

  It seems that HP scanners provide only basic functionality. I'm go to Epson printers that use the Document Capture Pro Software and advanced features that HP has taken away from us.

• Printer HP Officejet Pro 6830: OS 10.6.8 and Officejet Pro 6830

  I just bought a HP all-in-one Officejet 6830 Pro printer, fax, scanner, copier.  I connected it to my laptop, a MacBook Pro OS 10.6.8.  It copy in color, but it will not print from a file in color.  He apparently correctly scan in color, but not to print the scanned in color.  How to print in color?  I can't upgrade my system because I will not be able to access critical software.  What recourse do I have?  When I bought it was incompatible with some operating systems, there is no warning!

  Hey @cshein,

  Welcome to the Forum from HP Support.

  I understand that you encounter an incompatibility between your old version of Mac OS and your new HP Officejet Pro 6830 e-all-in-one printer.  I would like to help.  I can certainly sympathize with you on this one - even if your Mac is not old in real terms, Snow Leopard not blessed with a specific driver for your printer.  I have a workaround that you can try:

  The steps I posted in another thread here suggest using the generic PCL driver for the Mac.  This thread is about a former printer used with Yosemite, this article indicates that the similarities between the latest version of Mac and Snow Leopard are close enough to my advice work with your devices.  Let me know if this approach to configuration works and allows you to print in color.

  Note that the generic PCL printer driver probably won't make you analyze the features of the computer.  If you want to scan without using HP software, click here to get suggestions from HP on how to do it.  Note that this article 10.7 Mac users - oriented steps must always be relevant as Apple Preview, picture Capture and printing and scanning app are all common Mac OS applications that probably are Aussies in versions older Mac OS.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• HP officejet pro 6830: locking of the administrator

  Computer a major accident.  Now can not set or access all the settings through the printer wireless or the

  ALL in one software.  Need factory reset procedures, any help would be appreciated.

  Thank you

  Hi @drmjr,

  Welcome to the Forums of HP Support! I see that you are currently locked out of your HP Officejet Pro 6830. This occurred when the computer that is running the Windows 7 operating system has crashed.

  You should be able to do this by restoring the default network settings in the front panel:

  Menu Configuration > Wireless > restore default network settings > Yes

  This aid? If this is not the case, continue below:

  The lockout is really designed for printers to prevent others to make changes to printer that could affect the behavior of the printer.  For example, to keep the date and time the Fax value see him exactly receive time.

  Get the IP address of the printer by pressing the network icon at the top of the screen.

  Enter this IP address into the address bar of a web browser on a computer.  Printer status page should load.  If you receive warnings of certificate, choose the option that allows you to continue anyway.

  Click settings and then go into settings of the administrator on the left.  Many of the features of the façade are ordered here. Make sure everything is checked except control lock. Once it is defined, click on apply.

  Power off the printer for at least 1 minute and power then turn it on again to force the new setting to take effect.

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  To simply say thank you, click the "Thumbs up" below!   If you need more assistance let me know and I will gladly do everything I can to help.

• OfficeJet Pro 6830: Printer OfficeJet Pro 6830 how to scan to PDF files

  I bought a HP OfficeJet Pro 6830, and I can't understand how to scan documents from the printer to my computer in PDF format. It analyzes only in JPEG format.

  The documentation I found online says that the PDF option should be present on the touch screen, but are the only options on my printer to scan to the computer, fax scan, scan to e-mail, etc..

  I have 10 windows and a new HP laptop.

  Can anyone help?

  Hello

  Thanks for your comments.

  The disc that came with the printer may or may not have the support to win 10 OS as the priter was launched before Win 10 is available - where the download URL would be a safer way to get the WIn 10 OS feature MANY software.

  We recommend that you download (save on the hard drive) rather than installing in online it.

  After you install the FULL features software, you will be able to scan in PDF format.

  Hope that helps.

• Printhead error on 30 - day old HP OfficeJet Pro 6830

  I have a month old HP OfficeJet Pro 6830.  I get the following error: "ERROR: problem with printhead.

  I tried the following:

  (1) the printer reset

  (2) installation of new HP ink cartridges

  (3) selecting "clean print heads" in the menu of the screen - but the printer is not responding

  I have need ideas on what to do next, or if I should just return this printer to die after a month of domestic use.

  Hi Betsy,

  I found a document that talks about this problem.  He recommended that the reset of the printer that list you as something you did.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/model/7107898/document/c03026717

  I would recommend the once - printer reset, but if this does not resolve the issue - I return it.

  I'm sorry for the difficulty.

  Jean

• HP OfficeJet Pro 6830 constantly go 'offline' and cannot print

  Hello world.

  I love my HP OfficeJet Pro 6830. It does everything I need a printer / scanner but it is one of the aspects that are really starting to annoy me and my family (i.e. my WIFE!) - he continues to go 'Offline '.

  I understand perfectly that it needs/desires to go to save mode, when I'm not using it or have not used for some time, but for now, every time I have seem to need to use it (after I have not used for some time) of energy, it is listed as 'offline' and the only way I can print is stepping on him , turn off, turn it back on, wait a while so it connects to my WiFi network and then have another go. Then it works... and prints the other five copies of the document that my eager family tried to print!

  "HP print and Scan Doctor" said he of just nothing wrong and just suggest just uninstall and reinstall. I already tried and it changed nothing. Same problem with Windows 7 and 8.1. It will print a page of 'internal' test, but not via Windows test page.

  I also tried to restart the spoler and checked the 'File and Printer sharing' settings, the firewall settings and looked at the network discovery and run various windows troubleshooting tools without result. Nothing works, but the HP Officejet Pro 6830 software can see / communicate with him! It's so frustrating.

  Someone at - it ideas? This really, REALLY boring. Thanks in advance to anyone who donated their time to help me.

  Regards,

  Steve.

  Steve take a look at this link posted by JonW.

• HP Officejet Pro 6830: HP Officejet Pro 6830 fails to print color

  My HP Officejet Pro 6830 stopped printing in color.  All cartridges are new HP cartridges.  I took all those out and reinstalled them but even that prints black.  I have done a clean print head and alignment but still only prints black.  I went online and downloaded all of the software for this printer and still only black print.  Any ideas how to solve this problem?

  I have another 3 months on my warranty.

  I called HP Printer Support nd everything I had to do was go through all 3 levels of print head cleaning.  Now my HP Officejet Pro 6830 print in all colors.

• HP Officejet Pro 6830, model 6: print head problems

  Have an Officejet Pro 6830, model 6835.  Error message received saying this printer had print head problem.  Also the error code oxc19a0020.  Troubleshoot-carried out every day to solve the problem without success.  Reset, change cartridges, activated and deactivated (including source) and nothing has worked.  Bought on 23/04/15.  Only three months old.  Help!

  Hi, I would advise to call HP support immediately about this, as it is likely that you will need a replacement printer.

  Can you please let me know how you go?

  Thank you

  Ciara

  

• HP Officejet Pro 6830 does not connect to WiFi

  I got the HP Officejet Pro 6830 for 6 to 9 months, it has been great to work wireless any time.  Three nights ago, we had a power outage, now the printer will not connect to the wireless router.  He sees the SSID, but when I enter the password, it says that the password is incorrect.  I use an ARRIS Cable Modem.  Any suggestions?

  Hi @CWoodland ,

  I see that you are having problems with the implementation of the network again for the printer, you receive a message that the password is incorrect. I would really like to be able to help solve this problem.
  
  I would check the network on the Mac password, to verify that the password is entered.
  How to find the password WEP or WPA key for your wireless network.

  You may need to restore the default settings of the printer, and then try again.

  Go to configuration, network configuration, restore the network settings.

  Then run Wireless screen of the printer configuration wizard again.

  Go to installation, configuration, wireless settings, the Wireless Setup Wizard.

  If you need help, let me know.

  Have a great day!
  Thank you.

• OfficeJet Pro 6830: Officejet 6830 noise

  Since the automatic last update (a few days ago), my printer started making a rhythmic whining sound (similar to an old dial-up modem) when it is in standby mode. The noise comes close the power supply to the back of the printer. Whenever the noise happens, it is accompanied by a twinkle of a yellow LED near the input power agreement.

  I removed the power cable from the surge protector and plugged directly into the wall, but the problem persists. If I turn off the wireless feature, the noise changes pitch, but continues. The noise stops when the printer is turned on and working. I checked for new updates, but the printer tells me that all the current updates are in place.

  I wish I had this going away, as being close to the printer (in my living room) is driving me crazy unless I unplug it.

  Hi people, can you please try the latest firmware (published June 1) and let us know if that fixes the problem?

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/model/5390308#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Thank you

  Ciara