OfficeJet Pro 8000: installation of the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0

I'm chasing a well-documented problem of my printer lost network connection after a variable period of printing to do not. The only way to connect is to change the power supply, but the printer may take 5 minutes to blow and grunts until it settles and prints...

I put a static IP address on the printer (10.0.0.250) as well as an empty default gateway successfully, and the documents are printed after 5mins of blowing and grunting (save the regular lost connection which I'm hunting...).

I put what I thought has a static IP address on the router to match (see image below), but now I don't know if it was necessary, and if the 'hosting of the fixed DHCP server' is correct. It might be useless and missleading...

Using the configuration of the printer to 10.0.0.250 interface, it seems to accept the installation of the network when the default gateway is blank. With the help of 10.0.0.2 caused the 'page not found' error in my browser (Chrome).

However, when you try to reinstall the drivers, the installer has grumbled to the default gateway is set to 0.0.0.0, which currently is the only way it will work...

The Win7 PC is plugged into the router.
The printer wireless to the router.

ipconfig on the pc gives Ethernet card details below.

So basically I have no idea what I'm doing...!

==============

Ethernet connection to the Local network card:

The connection-specific DNS suffix. :
Link-local IPv6 Address...: fe80::c8e1:63ef:85e0:7 24% 13 c.
IPv4 address...: 10.0.0.249
... Subnet mask: 255.255.255.0.
... Default gateway. : 10.0.0.2.

Router config.

Thank you for your comments. It seems that I solved the problem of the default gateway. Time will tell if the remains of the printer connected through long periods of no use (see update below).

It seems that the configuration of the router of the "DHCP fixed existing host" has nothing to do with the device assigned a static IP address. In fact, it seems that this setting prevents the printer through a default gateway of the router address.

I noticed that when you give the PC a fixed IP, it connected through the router without any other configuration of router. If I reasoned that it may be applied to the printer also, so I moved the printer 10.0.0.251 and Bingo! the default gateway can be set to the IP address of the route.

Since then I downloaded to other updates, which is supposed to correct the common problem of wireless printers, loss of the connection.

I'll try to report in the next few weeks an update about the stability of connection network printers.

UPDATED: May 23, 2016

And more of the foregoing, my router support suggested I increase a parameter "timeout" from 24 hours to 10 days. I did it more than a week. Today, the printer worked after the impression of not for about 5 days

Tags: HP Printers

Similar Questions

  • Working Group stopped after the installation of the new wireless router

    My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

    I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

    I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

    WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

    The network path was not found.

    I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

    What version of XP you use (Home or Pro)?

    Can you access the Win 7 a XP computer?

    You have identical accounts, passwords on both computers?

    If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

    So... What is the name and version of your anti-virus program?
    What other security software is installed?

    On every laptop computer, open a command prompt window
    for XP: start > run > cmd > OK
    for Win 7: type cmd.exe in the search box and press enter
    In the black command prompt window, type the following command and press enter
    ipconfig

    Please provide the values for the following for the adapter wireless of each computer
    IP (XP)
    IPv4 address (Win 7)
    Default gateway

  • I downloaded my CSDesignWebPremium and when I tried to mount the drive - a 'DesignWebPremium, _CS6_LS16.dmg' says error message not recognized

    I downloaded my CSDesignWebPremium and when I tried to mount the drive - a 'DesignWebPremium, _CS6_LS16.dmg' says error message not recognized

    (I use a MAC 2.6 GHz Intel Core i7 (16 GB 1600 MHz DDR3) OSX 10.7.5)

    Squasha9, it seems that the downloaded DMG is corrupt.  Where you downloaded the installation files from?  You can download a copy of produced CS6 downloadinstallation files.

  • Re: Where to find the installation of the driver so that the Satellite A500 - 14q?

    Hello...

    I use Toshiba numere for awhile now and I never really paid attention to the order of installation the installation of the drivers.
    Now, I'm doing some research around this forum and discovered order 'is' somewhat important. or not?

    I just usually begin as desktop:
    Chipset, graphic, audio, and then all the rest. OK, toshiba must also have this addon of value, but I never installed in a specific order.

    So, the question is - where to find that my current machine (a500 - 14q) and my future one (p775.10j)?

    Thank you very much...

    Hello

    The order of installation is important if you are installing the tools of Toshiba.
    Some tools require installation of other tools.

    I looked into some of this forum for similar topics and found some details:
    Order of installation of Win 7:
    1 Windows 7 64 bit
    2 Intel Chipset SW Installation Utility 9.1.1.1019
    3 Intel Matrix Storage Manager 8.9.0.1023
    4 AMD driver 8.634.1 - 090729 a-086065C-Toshiba to display
    5 NVIDIA HD Audio Driver, 1.0.0.55
    TOSHIBA 6 utility 1.63.0.7C supervisor password
    7 TOSHIBA HW Setup Utility 1.63.0.11C
    Utility support 1.63.0.4C 8 TOSHIBA Flash Cards
    9 Realtek Audio Driver 6.0.1.5904
    10 Intel Wireless LAN Driver 12.4.1.11.0.s64_wCAT
    11 Synaptics Touch Pad Driver 14.0.1.1
    TOSHIBA Software Modem 2.2.97 12 (SM2297ALS03)
    13 Toshiba HDD Protection 2.2.0.2
    14 Bluetooth Stack for Windows by Toshiba v7.00.08 (T)
    15 Realtek LAN Driver 700.305.222.009
    16 Jmicron 1.00.32.01 card reader
    17 Sleep USB TOSHIBA and 1.2.3.0 service fees
    Facial recognition TOSHIBA 18 V3.1.1
    19 TOSHIBA eco Utility V1.1.11.64
    20 Sun Java2 Runtime Environment 1.6.0_14
    21 TOSHIBA HDD/SSD Alert 3.1.64.0
    22 TOSHIBA Service Station V2.1.33
    Control HDMI 23 2.0.0.1.64 Manager
    Manager remote control TOSHIBA 24 3.0.0.0
    25 TOSHIBA SD utility 1.9.1.12
    26 TOSHIBA PC Health Monitor 1.4.1.64
    27 TOSHIBA Fingerprint Utility 1.0.2.9
    ConfigFree 28 8.0.23
    29 TOSHIBA Web Camera Application, V1.1.1.4
    30 TOSHIBA Software Modem region Select utility 2.3.0.13
    31 TOSHIBA Network Device ID registry tool 3.0.32.4
    32 TOSHIBA Bulletin Board 1.0.04.0
    TOSHIBA ReelTime 1.0.04.0 33
    Memory SD 34 V1.9.1.12 utilities
    35 value package V1.2.26_64

  • Question about the installation of the driver on Satellite L20-153 PSL2XE

    Hi, a friend gave me his system Satellite L20 to install XP Pro SP2 (System was originally shipped with XP Home). After installation of XP Pro SP2, I tried to install the driver from the chipset of the page of the driver from the site, but I kept receiving a message saying the driver chipset could not be installed because my Windows installation was not complete. After visiting the page of the driver again and looking at the installation order for the L20 I was shocked to see so many microsoft updates and patches which supposedly must be installed before I install the drivers on the system.
    What I want to know is... what the precise order of installation? I'm having trouble getting all the specified updates and patches needed for the operating system...

    Any advice or ideas would be graetly appreciated.

    Thank you

    You are right. Satellite L20 comes with Windows XP Home edition at home but with the SP2 version. There is no difference and all the drivers can be installed with Windows XP Sp2 Pro family edition. I really don't understand what you're doing wrong.

    After installing WXP Pro boot up your laptop and install all the stuff of Toshiba following the install Instructions document and the exact order of facilities described here. You should not install all patches from Microsoft. When you are finished with the drivers, tools and utilities to just install activate Microsoft update and install available updates automatically.
    Be careful on SP3. Many people here report on the difficult problems after installing SP3.

    Before that, read this interesting thread:
    Suggestion before installing service pack 3

  • Is responceable for Windows Vista to remove my windows mobile 6.5 driver when I sync, how can I reload the driver wireless on my HP Ipaq hx 2795

    My hand held HP Ipaq hx 2795 worked great for several days.  Now the driver for the wireless connection is gone and I can't find a waay to download a new

    Hi Shane H,

    Welcome to Windows Vista answers Forums!

    The driver installation may not have completed successfully. Try the following steps to reinstall the drivers:

    1. keep your device connected

    2. from the desktop, go to Start > Search

    3. Enter "Device Manager" or "devmgmt.msc" to launch the Device Manager window

    4. search under the node "network cards" "Microsoft Windows Mobile remote adapter. If this is not present, go to step 5. Otherwise, click "Microsoft Windows Mobile remote adapter" and select "Uninstall".

    5. look under the 'mobile devices "node for" Microsoft USB Sync'.»» If this is not present, go to step

    6. in the case, right click "Microsoft USB Sync" and choose "Uninstall".

    7 restart the computer. Disconnect, and then reconnect your device. Your device driver will be re - install and launch Windows Mobile Device Center.

    For more information, you can consult the following link:

    http://www.Microsoft.com/windowsmobile/en-us/help/synchronize/Device-Center-Troubleshooting.mspx

    Hope this information is useful.

    Jeremy K

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to update the driver wireless for Pavilion dm4

    Hello

    My internet provider says my wireless driver needs to be updated to use the new Wi - Fi modem. What should I do? Could you please give me detailed step by step instructions?

    Laptop: HP Pavilion dm4

    Windows 7 Home premium

    Series # [personal information]

    Model # dm4 - 2053ca

    Product # LY126UA #ABC

    Under "Network adapters" in "Device Manager", he listed...

    Atheros AR8151 PCI - E Gigabit Ehernet controller (NDIS 6.20)

    Device Bluetooth (personal area network)

    (Heading RFCOMM Protocol TDI) Bluetooth device

    Intel Centrino Wireless-N 1030

    MS Virtual WiFi Miniport adapt

    MS Virtual WiFi Miniport adapt #2

    Thank you!

    Hello:

    Here is the link to the latest driver wireless for the Intel Centrino 1030.

    You want the second file in the list, given that product for your laptop specifications indicate it has Windows 7 64 bit.

    http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22116&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType = software % 20Applications

    There of not much to it.

    Click Download to the right of the driver file, accept the agreement, select the run option and follow the instructions on the screen, if necessary.

    Installation is automatic and should take less than two minutes.

  • Problems installing photosmart b110a on Windows 7 64-bit - ERROR in the installation of the driver.

    Hello

    Maybe you can help my with installing the software driver for my B110a on my laptop Windows 7 64-bit Enterprise Edition. I downloaded the driver software of:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-82451-1&CC=de&DLC=de&LC=de&...

    I tried several times, including the Installation of HP error - Windows 7. hta guidance. In fact, I have already installed a large number of printers on the PC in my family - I've never known such a problem...

    I'm always done with a "fatal error":

    1. fatal error:

    2. error information send to HP:

    3. details / location error code:

    Any help is welcome and appreciated, since I am quite desperate in the meantime - after trial & error for more than 3 hours... ;-(

    Thanks in advance and best regards from Switzerland, Dominic

    Dominic Rihm

    [Personal information]

    Hi again,

    I found the solution and the solution here:

    "fatal error hpzprl40.exe Windows 7 D100 printer all-in-one.

    http://h30434.www3.HP.com/T5/printer-networking-and-wireless/fatal-error-on-hpzprl40-exe-Windows-7-D...

    It wasn't a specific problem of the B110! The problem is a corrupted system file which I fixed it with sfc/scannow! :-)

    Cheers!

    Dominic

  • Satellite A100-237: I don't have the Catalyst Control Center after the installation of the driver

    Hello

    I use a laptop Satellite A100-237. 1.83 GHz Core Duo, Ati Mobility Radeon X 1600 512 MB Hypermemory, 1.5 GB of RAM DDR2.
    My laptop seems to now use only the own 256 MB RAM (own RAM graphics card).
    I bought Need for Speed Carbon and installed on my laptop.

    When I tried to open the game, a blue screen appeared for less than 1 second and the system rebooted. Windows said it was a critical mistake and a stopped driver Windows XP for work, so the system is restarted.
    I searched on the net for this problem, and the people said that when they pilot updated the problem is resolved.

    I downloaded the 8.241 display driver (download file name: display_xp - 8241.zip) Toshiba - Europe.com.
    Driver installed, but when installing ATI Catalyst Control Center, at one time installation process continuing collapsed. I had to end the task after a while.
    He said that the driver is installed and system must be rebooted.

    Now the game works, which is not the problem, but I do not have the Catalyst Control Center. (Where I recently use to connect other screens to my laptop)
    How can I solve this problem?

    Sorry for the long letter,
    Thanks for the help.

    Hello

    As suggested above, you can try to restart the installation but I guess that you will not be able to install the graphics driver of ATI origin on the manufacturing site.
    You can try to use the omega site ot driver drivers Toshiba orginal...

    @aportakal
    Anyway, the ATI MOBILITY RADEON X 1600 is not a memory sheared graphics card and this is why this card does not use the part of the main memory. It supports a 256 MB own memory.

  • Realtek PCIe Gbe family controller findFile error absent during the installation of the driver

    Model: HP ENVY TouchSmart 15-j052nr

    Question: Has lowered Windows 8 for windows 7 and

    (1) question:

    everything works fine except no USB 3.0 ports are working. I see an unknown device and it is not able to find the driver.

    Unknown device: Details column has ID Hardword

    IUSB3\ROOT_HUB30 & VID_8086 & PID_8C31 & REV_0005 & SID_1962103C

    IUSB3\ROOT_HUB30 & VID_8086 & PID_8C31 & REV_0005

    IUSB3\ROOT_HUB30 & VID_8086 & PID_8C31

    I tried to install https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22824 but it did not help.

    (2) question

    Another question: the Ethernet controller is missing the driver and I get findfile failed when I try to install the driver

    Controller Realtek PCIe Gbe family

    Error: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/findfile-failed-the-realtek-netw...

    I tried pluggin ethernet cable when installing the driver also but no result

    You are the very welcome.

    If you have not installed c of the first Intel chipset driver and restart.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

    Then, I would try the driver directly from Realtek on the link below.

    You want to download and install the second driver file on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • problems with the installation of the driver for hp 6300 all-in-one under Windows 7

    I have not install hp 6300 all-in-one driver a10_cdb_net_full_win_130_141.exe I downloaded from the HP website.  The diagnostics said: "this application has requested the execution to terminate in an unusual way.  Please contact the team for more information application support. "Please explain what is happening.

    Thank you

    Peter

    Hi petervol,

    Download and install the following hotfix below and then run the instructions to uninstall & reinstall the printer.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77751-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

    Try using the brush included in the CD or download.

    Of the Original installation CD:

    1. Insert the CD in the drive and then cancel Setup

    2. open my computer and click right then on the CD from the drive and select open

    3 open the Util folder

    4 open the CCC folder

    5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    9 download drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76831-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:

    1. type % temp % in the field of race

    2. Locate and open the folder starting with 7z (example: 7zS2356)

    3 open the Util folder

    4 open the CCC folder

    5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    9 download drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76831-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

    10. run the download to reinstall the printer

  • installation of the driver Imation superdisk120 (LONG)

    Under XP, service pack 2 and not connected to the internet. The Imation SuperDisk is parallel port model not a USB device.  It plugs into the printer port connector.

    Eager to recover an old file off a Superdisk Imation 120 I tried to connect the drive to the old computer, where it was once installed.  Drive was not working so I uninstalled and installed again since the original Imation disk.

    The installation seems to work and the display the message says that it has been installed successfully.  But when I try to use the PC hangs.  The device is not correctly displayed on the Explorer window - it says "diskette of 3 1/2 (b)" if I do a forced shutdown, Windows XP is up with terrible disk addressing messages to not be consistent, files not where they are supposed to be, etc..  But if I start in safe mode and uninstall the Superdisk, Windows XP is happy once more and does not seem to suffer persistent problems.

    I tried to find a more appropriate (XP) or a more recent driver using my PC every day, but this product is obsolete for a long time.

    There is a ReadMe.TXT file which involves potential problems with the device and the IRQ addresses, but I'm not knowledgeable enough to make heads or tales of what he says.  In part because it is written for older versions of Windows 95 or NT.

    I suspect that it is indeed addressing conflict but have no idea how to go about fixing.  Here's what says the ReadMe.TXT file:

    *****************************************************************************************

    Overview of the Parallel Port
    -------------------------------------

    Parallel ports have traditionally been seen as "printer ports".
    As mobile and external devices are becoming very popular, new
    standards of port as Enhanced Parallel Port (EPP) in parallel and
    Extended features (ECP) port are breaking the barriers of performance
    and which allows operation at full bus speed.

    Machines IBM-compatible supports 3 parallel ports.
    Each parallel port has a unique i/o address.  The three commonly used
    O/r address are 0x3BCh, 0x378h, 0x278h with two available interrupts
    (IRQ 7 and IRQ 5). Systems not IBM as NEC 98XX have ports such as 0x140h.
    and IRQ 14. These addresses are also called by the "logical device name.
    some LPT1, LPT2, LPT3.

    Normally, the first port is configured for 0x3BCh/IRQ7, the second at 0x378h.
    IRQ7 and the third in 0x278h/IRQ5. However the ports can be assigned to one of
    These three addresses. It is possible to set up a parallel port to share
    IRQ, like most software does not IRQ use while using the port. However
    interrupt the driver software as an external hard disk, cdroms, etc., may require that
    IRQ for improved operation. Most of the systems on the market have their
    first parallel port (LPT1) assigned 378 h, IRQ 7 by default when shipped.

    The base address and the IRQ can be identified by the search:

    a. in the CMOS settings.

    b. with the help of MSD (Microsoft Diagnostics) in the BACK, the Device Manager under
    System of WIN95, WINNT Diagnostics in NT

    In some systems, the CMOS does not address basis nor the IRQ, but
    Specifies 1 parallel to 3BC/IRQ7, 2 parallel for 378/IRQ 7 and parallel 3
    for 278 /IRQ 5.

    In some LPT1/378 systems options assigned LPT IRQ 7 and assigns LPT2/278
    the turbine BP to IRQ 5.

    Troubleshooting tips
    -----------------------

    General:

    1. the questions of recognition of parallel Port
    The system has a parallel port EPP, but do not initialize in EPP.

    Solution:
    The pilot of the shuttle initialize EPP only for parallel port basics set
    to 378 h and 278 h. If the parallel port to which the device of the shuttle is
    connected is configured to 3BCh, the driver will initialize not in EPP.

    2. the driver fails to load or to identify the adapter. Pilot reports
    "Error during initialization adapter, driver failed to load".

    Solution:
    a. unplug the unit and set up the system.
    b. Add the option "/ a" to the driver.
    d. Save and reboot the system after the connection of the shuttle.
      
    If this does not work:
    Repeat steps a and b.
    c. Type "/ DI/R2 /W2"
    d. Save and reboot the system after the connection of the shuttle.

    If this does not work:
    Repeat steps a and b.
    c. Type "which / / W2/R2 OF."
    d. Save and reboot the system after the connection of the shuttle.

    Configuration of the clashes often lead to problems that system or to prevent crash
    the pilot of the shuttle from loading successfully. Make sure that other devices
    installed in the system are not configured to use the same base port and the IRQ
    values. A typical example is of sound cards that are popularly set to
    Use IRQ 7.

    BACK:

    1 Shuttle hard/removable disk drive and FDISK

    Solution:
    To partition the hard drive or removable drive with the
    The command FDISK, support INT 13 h must be activated.
       
    Add option/b to the driver in the CONFIG. SYS to enable INT 13 h support
    and re-start the system.

    Run FDISK displays now the shuttle HDD as well.

    Win 95:

    1 uninstall or prevent a shuttle loading MPD

    Procedure:
    To uninstall the shuttle MPD in Device Manager expand SCSI
    Adapters section, select the entry for the device of the shuttle,
    Click on delete. Confirm when the confirmation dialog box appears and
    Reboot the system to reflect the change.
    The entrance to the MPD shuttle now will no longer appear in Device Manager
    under SCSI cards.
    The MPD is NOT deleted it has installed the path.
    To prevent the MPD of shuttle loading, in Device Manager, expand
    the item of SCSI cards, and then at the entrance of the MPD shuttle.
    Click Properties and uncheck the box that reads Original
    [Current] configuration.
    Re-start the system, the MPD will not charge.
    (This can be checked by the Red 'X' that will appear
    alongside the MPD entry in Device Manager.)

    2 assignment/Reassigning the drive letter of the device of the shuttle

    Procedure:
    In Device Manager, select the device from the shuttle by clicking on it,
    Click the settings tab, change the drive letter appears.
    Reboot the system to reflect the change.

    3 shuttle MPDs running on machines not standard parallel port
    Addresses basic or IRQ.

    Solution:
    On machines like the NEC 9800 series, the MPD requires that be explicitly
    with the parallel port IRQ and port values.
    In Device Manager, expand the item of SCSI cards, click on the
    Shuttle MPD, click Properties, select the settings tab and type
    base port and the IRQ values as follows:
    PORT = 0xYYY IRQ = Z
    The prefix 0 x is required. YYY is the port of departure for example 140 and Z is the
    IRQ 12 value for example.

    4. the shuttle hard/removable disk drive and FDISK

    Solution:
    To partition the HARD drive of the shuttle with the command FDISK, INT 13 h
    support must be enabled.
    In Device Manager, select the device from the shuttle, click on properties,
    Check the box relating to Int 13 support and re-start the system.

    Run FDISK displays now the shuttle HDD as well.

    5. general controls and advice on improving overall performance

    a. make sure that the configuration of the CMOS setting for the parallel port
    and the setting in Device Manager is the same.
    (b) ensure that there is no Port Base and IRQ comes into conflict with others
    devices such as sound cards.
    c. If the compatible parallel port EPP, ensure that the parallel port
    in the system CMOS is set to EPP.
    d. to step to the top performance of the system, in the Control Panel,.
    Select system, select the performance tab, click file system.
    ensure that the Performance is set to Full.
    e. Select the Troubleshooting tab and make sure that writing it back
    Cache is enabled. These are usually the default settings.

    WINDOWS NT:

    1. in the start of Windows NT does not recognize cartridge not
    drive letter is assigned.

    Windows NT will not assign a drive letter unless a cartridge has a
    Signature of Windows NT.

    Solution:
    Run Disk Administrator to place a signature of windows NT on the cartridge.

    ********************************************************************************************

    Thanks for the reply, Bill.  Looked at this site a couple of days.  They seem to focus on current products.

    All is well now that I'm back to Windows 98SE on the old PC.  The Imation SuperDisk installed and works very well.  I got the files I needed.  The whole machine goes back in the closet now for 6 years!

    Thanks to everyone who took the time to look at my question.

  • Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

    The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

    I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

    The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

    I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

    What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

    I'm talking about a window similar to this one
     
    http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

    Try changing the backup.ini

    you find it in

    .. \Program files (x86)\MozBackup\backup.ini

    Open the file backup.ini with editor

    Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

    Change the value of "1": monitor

    wyzodir =

    ; Monitor: the monitor number where MozBackup window will appear

    monitor =1

    '2' or whatever the value of your primary monitor is:

    wyzodir =

    ; Monitor: the monitor number where MozBackup window will appear

    monitor =2

    System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

  • Win98 installation in the drive

    Hello

    I used VMware player 3.1 to run a Win98 machine so I can use an old film scanner.

    The Win98 machine was OK until a drive crash required a reinstall. When I started to the reinstall, I was directed to the V 4.0 update.

    VMware installs fine, but I'm unable to install WIN98 in there. All I get is network and PXE - E53 PXE - M0F messages start message.

    I tried to install from the CD-ROM and an ISO without result file player.

    Thanks for your help,

    .

    We have explained this if often only a brief overview should suffice here

    1 boot from win98 boot floppy image
    2. run fdisk and partition of the drive - restart
    3. run format C: and reboot sys c:-
    4 boot from CD or ISO and run the installer

    you have no floppy drive?
    come on – that's a lame excuse - use img-files or flp place

  • Satellite M40: Question about the installation of the driver

    Dear Toshiba

    I have Toshiba Satellite M40, when I installed with win Xp recovery CD, I found everything is ok except the following:

    When I go to 'connection area action' and press 'install' botton to install client for netware... I have the following message:
    "unable to find the drivers for this device...". If you have a disk that contains the driver update or windows search click ok"

    Help, please
    Thank you

    Hello Mohamed

    It seems that your laptop is trying to install the network driver, but the operating system can find t he or you the driver source is false.
    In this case you must download from Toshiba Web site network driver and install it.

    Good bye

Maybe you are looking for

  • BOOTMGR missing Satellite C660

    Hi people, I have the Satellite C660Initially, I had a virus and tried to reinstall windows, but not good.When it came to the point of saying there was not enough space on the windows installation disc,I realized that I had forgotten the bit score. N

  • D10 BIOS AND O/S SHOWING ONLY HALF THE RAM INSTALLED

    Computor was purchased with 8 1gig chips installed. The bios and the operating system report 4 GB. When I remove the ram in slot 2, 4, 6 and 8, the bios and the o/s report 2 gig. I have cleared the cmos memory and reinstall the RAM chips. Although th

  • PlayFirst games, Diner Dash does not.

    My games of Playfirst, Diner Dash do not work. They just stop. The message says that windows has a problem and will try to fix it, but they don't always work.

  • Envy 15-q009tx: Envy 15 audio is broken

    Spoiler (Highlight to read)     My envy 15, which was introduced 6 months ago, audio sound broke her. For example, when the audio is "make me ra fa", could be"ra-a-a fa." And it comes in unexpected ways. Any I play a youtube video or mp3 on the playe

  • Flow and Internet Explorer 9 task dialog box

    Hello is there a known problem on the opening of the workflow in the dialogues with IE 9? We have updated the browser and this type of workflow, when opening within a region, no longer works. ADF 11.1.1.6THAT IS TO SAY 9 Thank you.